UPD70F3004AGC-33 [NEC]

32-bit RISC Microcontrollers; 32位RISC微控制器
UPD70F3004AGC-33
型号: UPD70F3004AGC-33
厂家: NEC    NEC
描述:

32-bit RISC Microcontrollers
32位RISC微控制器

微控制器
文件: 总4页 (文件大小:35K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
V853  
V850 family  
32-bit RISC Microcontrolle rs  
Product Le tte r  
The single-chip V853 microcontroller is a member of NECs 32-bit RISC V850 family.  
It integrates CPU, ROM, RAM and peripheral functions on chip. The internal bus is 32 bits  
wide, the external bus 16 bits wide. Controller memory options are listed in Table 1.  
De s crip tion  
Ap p lications  
Like other V850 series controllers, the V853 device is used for real-time control  
applications, such as servo motor control in computer peripherals and machine tools, for  
engine management control, consumer electronics and multimedia. Flash memory, a variety  
of serial communication channels and AD/DA converters make it the perfect choice for  
compact communication terminals and complete control systems. Typical benefits of Flash  
memory are individually programmed devices in the final production process and field  
upgradability. With their low power consumption and power-saving modes, V853 devices  
are also ideal for portable applications.  
Fe ature s  
Small 32-bit RISC CPU core  
30 ns minimum instruction execution time  
(33 MHz max. clock)  
16-Mbyte linear address space  
1-Mbyte external address space  
32 general-purpose registers  
74 instructions optimized for embedded  
control  
Up to 8 Kbytes internal RAM  
Interrupt controller  
Real-time pulse unit/timers  
Serial interface with baud rate generator  
A/D and D/A converters  
PWM  
Clock generator  
Power save functions  
Mask ROM, Flash versions  
100-pin LQFP package  
DSP functionality with 16-bit multiplication  
and saturation logic in a single clock cycle  
Block Diagram  
NMI  
CPU Core  
Instruction  
Queue  
Interrupt  
Controller  
ROM  
Mask  
INTP  
PC  
ASTB  
96/128  
Kbytes  
or Flash  
128/256  
Kbytes  
DSTB  
TI  
TO  
Hardware  
Multiplier  
16 x 16 > 32  
R/W  
Timer/Counter  
16-bit timer:  
5 channels  
Barrel Shifter  
UBEN  
LBEN  
Bus  
Control  
Unit  
TCLR1  
System  
Registers  
WAIT  
A
L
U
A16-A19  
AD0-AD15  
HLDRQ  
HLDAK  
SIO  
SO0/TxD0  
SI0/RxD0  
SCK0  
RAM  
4 Kbytes/  
8 Kbytes  
General  
Registers  
UART/CSI  
BRG  
SO1/TxD1  
SI1/RxD1  
SCK1  
UART/CSI  
BRG  
SO2  
SI2  
SCK2  
Internal Peripheral Bus  
CSI  
BRG  
CSI  
SO3  
SI3  
SCK3  
AVDD  
AVREF1  
CKSEL  
CLKOUT  
X1  
Oscillator and  
Clock Generator  
AVSS  
A/D Converter  
ADTRG  
ANI1-ANI7  
PWM  
Ports  
PWM  
P0-11  
X2  
MODE  
RESET  
System Control  
ANO  
D/A Converter  
AVREF  
Functional Block Des cription  
CPU  
The internal CPU, based on Harvard architechture, is a very compact 32-bit RISC engine.  
Most instructions are executed in a single clock cycle under control of a 5-stage pipeline.  
It also includes a 16 x 16-bit hardware multiplier with 32-bit result and saturation logic. A  
32-bit barrel shifter and bit manipulation instructions accelerate complex bit operations.  
Bus Control Unit  
(BCU)  
The BCU initiates the bus cycles based on the physical addresses generated by the CPU.  
When an instruction stored in external memory is executed and no bus cycle initiation is  
requested by the CPU, the BCU creates a prefetch address to prefetch an instruction code  
which is then inserted in the internal instruction queue.  
The internal RAM, with a capacity of 4 or 8 Kbytes, is mapped from address FFFFE000H.  
The CPU can access any data in one clock cycle.  
RAM  
ROM  
The internal ROM (96 or 128 Kbytes) or Flash ROM (128 or 256 Kbytes) is mapped from  
00000000H. The CPU can access any instruction from the ROM/Flash ROM in one clock cycle.  
PROM Programming  
Ports  
The Flash memory can be written and erased electrically.  
The V853 has 67 input/output port pins that can be used alternatively as control pins.  
The interrupt controller handles the interrupt request issued by internal peripheral  
hardware and external sources. Up to 8 interrupt priority levels can be specified for each  
interrupt request.  
Inte rrupt Controlle r  
The clock generator produces the CPU operating clock. The internal frequency can be  
selected as 5x or 1x of crystal frequency by using the internal PLL or 1/2x crystal frequency  
without PLL. An external clock can be used instead of the clock generator. A clock-out  
signal is available.  
Clock Ge ne rator  
Re al-time Puls e  
The RPU includes a 5-channel 16-bit timer/counter unit.  
Unit (RPU)/Time rs  
The serial interface includes two channels of CSI (Clocked Serial Interface) and two channels  
which can be operated in the UART (Asynchronous Serial Interface) or the CSI mode. The  
UART transfers data via the TxD and RxD pins. The baud rate is determined by the on-chip  
dedicated baud rate generator. The CSI transfers data via the SO, SI and SCK pins at a baud  
rate determined by the on-chip dedicated baud rate generator or an external clock.  
Se rial Inte rface  
An 8-channel A/D converter with 10-bit resolution and a 2-channel 8-bit D/A converter are  
integrated.  
A/D Conve rte r  
PWM  
A 2-channel PWM unit with different operating modes is available on chip.  
V853  
32-bit RISC Microcontrolle rs  
Ordering Information  
Part Number  
Max. freq.  
ROM  
Flas h  
RAM  
De vice s  
(MHz)  
25  
(Kbyte s )  
(Kbyte s )  
(Kbyte s )  
µPD703004AGC-25  
µPD703004AGC-33  
µPD703003AGC-25  
µPD703003AGC-33  
µPD70F3004AGC-25  
µPD70F3004AGC-33  
µPD70F30025AGC-25  
µPD70F30025AGC-33  
µPD7030025AGC-25  
µPD7030025AGC-33  
96  
96  
128  
128  
-
-
4
4
4
4
4
4
8
8
8
8
33  
-
25  
-
33  
-
25  
128  
128  
256  
256  
-
33  
-
25  
-
33  
-
25  
256  
256  
33  
-
Doc Number  
Devices  
Type  
CD-ROM  
Docum e nta tion  
U13919EE2V0CD00  
U10243EJ6V0UM00  
U10913EJ5V0UM00  
U13188EJ2V1DS00  
U13189EJ2V0DS00  
NEC Micro-Components  
V850  
Architecture Manual  
User’s Manual  
Data Sheet  
V853  
V853 Mask  
V853 Flash  
Data Sheet  
Order Number  
V850-IAR-Toolset  
IE-703003-MC-EM1  
CPDW95/NT-CDR-V800  
FA100-GC  
Devices  
V850  
Des cription  
Type  
Tools  
ICE + C Compiler  
Emulation Board  
C/C++ Compiler (GHS)  
Hardware & Software  
Hardware  
V853  
V850  
Optional Software  
Hardware  
100-pin LQFP Programming Adapter  
V850  
SC100SDN  
Emulation Probe Extension Optional Hardware  
StartWARE-GHS-V850/SA1 V850  
FlashMASTER V850  
Starter Kit  
Hardware & Software  
Hardware  
Programmer  
For further information on NECs V850 family or other NEC products visit our European  
website at www.ne c.de  
V853  
32-bit RISC Microcontrolle rs  
NEC Office s  
NEC Ele ctronics (Europe ) GmbH, Oberrather Str. 4, D-40472 Düsseldorf,  
Tel. (02 11) 65 03 01, Fax (02 11) 65 03-3 27  
NEC Ele ctronics (Ge rmany) GmbH, Kanzlerstr. 2, D-40472 Düsseldorf,  
Tel. (02 11) 65 03 02, Fax (02 11) 65 03-4 90  
- Podbielskistr. 164, D-30177 Hannover, Tel. (05 11) 3 34 02-0, Fax (05 11) 3 34 02-34  
- Arabellastr. 17, D-81925 München, Tel. (0 89) 92 10 03-0, Fax (0 89) 91 31 82  
- Industriestr. 3, D-70565 Stuttgart, Tel. (07 11) 9 90 10-0, Fax (07 11) 9 90 10-19  
NEC Ele ctronics (BNL) - Boschdijk 187a, NL-5612 HB Eindhoven,  
Tel. (0 40) 2 44 58 45, Fax (0 40) 2 44 45 80  
NEC Ele ctronics (Scandinavia) - Täby Centrum, Entrance S (7th floor),  
S-18322 Täby, Tel. (08) 6 38 08 20, Fax (08) 6 38 03 88  
NEC Ele ctronics (France ) S.A., 9, rue Paul Dautier, B.P. 187,  
F-78142 Vélizy-Villacoublay Cédex, Tél. (01) 30 67 58 00, Fax (01) 30 67 58 99  
NEC Ele ctronics (France ) S.A., Re pre s e ntacion e n Es pana,  
Juan Esplandiu 15, E-28007 Madrid, Tel. (01) 5 04 27 87, Fax (01) 5 04 28 60  
NEC Ele ctronics Italiana S.R.L., Via Fabio Filzi, 25A, I-20124 Milano,  
Tel. (02) 66 75 41, Fax (02) 66 75 42 99  
- Rome Office, Via Monte Cervialto, 131, I-00139 Roma,  
Tel. (06) 8 86 22 91/2, Fax (06) 8 86 22 39  
NEC Ele ctronics (UK) Ltd., Cygnus House, Sunrise Parkway, Milton Keynes,  
GB-MK14 6NP, Tel. (0 19 08) 69 11 33, Fax (0 19 08) 67 02 90  
- Scotland Office, Block 3, Carfin Industrial Estate, Motherwell GB-ML1 4UL,  
Tel. (0 16 98) 73 22 21, Fax (0 16 98) 83 38 68  
© Published by NEC Electronics (Europe) GmbH, Printed in Germany, February 2000  
Document No. U12893EE3V0PL00  
With compliments  
NEC makes no warranty with respect to this documentation and disclaims any implied warranties of merchantability or fitness for particular  
purpose. NEC does not assume any responsibility for circuits shown or claim that they are free from patent infringement. Product specifications  
are subject to change without notice. To ensure that you have the latest product data, please contact your local NEC sales office.  
©
NEC Electronics (Europe) GmbH  

相关型号:

UPD70F3008GJ-16-8EU

Microcontroller
ETC

UPD70F3008YGJ-16-8EU

UPD70F3008YGJ-16-8EU
RENESAS

UPD70F3015B

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC

UPD70F3015BGC-8EU

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC
NEC

UPD70F3015BY

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC

UPD70F3015BYGC-8EU

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC

UPD70F3015BYGC-8EU-A

Microcontroller, 32-Bit, FLASH, 20MHz, CMOS, PQFP100, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-100
NEC

UPD70F3017A

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC

UPD70F3017AF1-EA6

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC

UPD70F3017AGC-8EU

32-BIT SINGLE-CHIP MICROCONTROLLER
NEC

UPD70F3017AGC-8EU-A

Microcontroller, 32-Bit, FLASH, 20MHz, CMOS, PQFP100, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-100
NEC