SJ-A2870-FREQ [NEL]

CRYSTAL CLOCK OSCILLATORS; 晶体时钟振荡器
SJ-A2870-FREQ
型号: SJ-A2870-FREQ
厂家: NEL FREQUENCY CONTROLS,INC    NEL FREQUENCY CONTROLS,INC
描述:

CRYSTAL CLOCK OSCILLATORS
晶体时钟振荡器

振荡器 晶体 时钟
文件: 总2页 (文件大小:382K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Data Sheet 0225A  
CRYSTAL CLOCK OSCILLATORS  
Rev. C  
Differential Positive ECL (DPECL)  
SJ-B2870 Series  
Description  
The SJ-B2870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals  
in a ceramic SMD package. Systems designers may now specify space-saving, cost-effective packaged  
PECL oscillators to meet their timing requirements.  
Features  
• Wide frequency range–50.0MHz to 100.0MHz  
• User specified tolerance available  
• Low Jitter - Wavecrest jitter characterization  
available  
• Will withstand SMD reflow temperatures of 253°C • High Reliability - NEL HALT/HASS qualified for  
for 4 minutes maximum  
crystal oscillator start-up conditions  
• High Q Crystal actively tuned oscillator circuit  
• Power supply decoupling internal  
• Space-saving alternative to discrete component  
oscillators  
• High shock resistance, to 1000g  
• 2.5 volt operation  
• No internal PLL avoids cascading PLL problems  
• High frequencies due to proprietary design  
• Gold plated leads - Solder dipped leads available  
upon request  
• Metal lid electrically connected to ground to  
reduce EMI  
• MECL 10K and 10KH series compatible output on  
Pin 3, complement on Pin 1  
• RoHS Compliant, Lead Free Construction  
(unless solder dipped leads are supplied)  
Electrical Connection  
Pin  
Connection  
1
2
3
4
Output Complement  
VEE /Ground  
Output  
VCC  
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881  
Email: nelsales@nelfc.com www.nelfc.com  
Data Sheet 0225A  
CRYSTAL CLOCK OSCILLATORS  
Rev. C  
SJ-B2870 Series Continued  
Differential Positive ECL (DPECL)  
Operating Conditions and Output Characteristics  
Electrical Characteristics  
Parameter  
Frequency  
Symbol  
-----  
Conditions  
-----  
Min  
Typical  
Max  
50.0MHz  
45/55%  
VCC-1.95V  
VCC-1.12V  
-----  
-----  
-----  
-----  
1.0 ns  
-----  
-----  
-----  
100.0MHz  
55/45%  
VCC-1.50V  
VCC-0.74V  
2.0 ns  
Duty Cycle  
-----  
@ VCC-1.29V  
-----  
Logic 0 (2)  
VOL  
Logic 1(2)  
VOH  
-----  
Rise & Fall Time  
Tpd (4)  
tr,tf 20-80%VO with 50 ohm load to VCC-2V -----  
-----  
-----  
dF/F  
-----  
-0.5 ns  
-----  
+0.5 ns  
3 psec  
Jitter, RMS(3)  
Frequency Stability (1)  
-----  
Overall conditions including:  
voltage, calibration, temp.,  
10 yr aging, shock, vibration  
-100ppm  
+100ppm  
General Characteristics  
Parameter  
Symbol  
Conditions  
Min  
Typical  
2.5V  
Max  
Supply Voltage  
Supply Current  
VCC  
ICC  
2.5V±5%  
2.375V  
0.0 mA  
2.625V  
50 mA  
50 ohm termination  
To 2.00V below VCC  
-----  
Output current  
IO  
Low level Output Current 0.0 mA  
-----  
-----  
-----  
-----  
-----  
±50.0 mA  
70°C  
Operating temperature  
Storage temperature  
Power Dissipation  
Lead temperature  
Load  
TA  
TS  
PD  
TL  
------  
0°C  
-----  
-55°C  
-----  
125°C  
-----  
131 mW  
300°C  
Soldering, 10 sec.  
-----  
50 Ohm to VCC-2V or Thevenin Equivalent, Bias Required  
Start-up time  
tS  
-----  
-----  
2 ms  
10 ms  
Environmental and Mechanical Characteristics  
Mechanical Shock  
Thermal Shock  
Vibration  
Per MIL-STD-202, Method 213, Condition E  
Per MIL-STD-833, Method 1011, Condition A  
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz  
300°C for 10 seconds  
Soldering Condition  
Hermetic Seal  
ESD Sensitivity  
Leak rate less than 1 x 10 -8 atm.cc/sec of helium  
Human Body Model per ON Semiconductor 10kH series ECL: 500V min.  
Footnotes:  
1) Standard frequency stability (±20,±25,±50ppm & others available)  
2) VOL, VOH, referenced to ground (VEE) with VCC = 3.3V  
3) Jitter performance is frequency dependent. Please contact factory for full Wavecrest characterization.  
RMS jitter bandwidth of 12kHz to 20MHz.  
4) Tpd is phase shift between the falling edge of pin 3 at VCC-1.29V and rising edge of pin 1 at VCC-1.29V.  
Creating a Part Number  
SJ - B287X - FREQ  
Package Code  
Tolerance/Performance  
0 ±100ppm 0-70°C  
1 ±50ppm 0-70°C  
SJ 4 J Lead SMD  
7 ±25ppm 0-70°C  
Input Voltage  
9 Customer Specific  
A ±20ppm 0-70°C  
Code Specification  
A
B
3.3V  
2.5V  
5V  
B ±50ppm -40 to +85°C  
C ±100ppm -40 to +85°C  
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881  
Email: nelsales@nelfc.com www.nelfc.com  

相关型号:

SJ-A2871-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

SJ-A2872-FREQ

CRYSTAL CLOCK OSCILLATORS
ETC

SJ-A2877-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

SJ-A2879-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

SJ-A287A-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

SJ-A287B-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

SJ-A287C-FREQ

CRYSTAL CLOCK OSCILLATORS
NEL

SJ-A2920

Differential Positive ECL (DPECL) Fast Edge
NEL

SJ-A2920-FREQ

Differential Positive ECL (DPECL) Fast Edge
NEL

SJ-A2921-FREQ

Differential Positive ECL (DPECL) Fast Edge
NEL

SJ-A2927-FREQ

Differential Positive ECL (DPECL) Fast Edge
NEL

SJ-A2929-FREQ

Differential Positive ECL (DPECL) Fast Edge
NEL