74ALVC374D [NEXPERIA]

Octal D-type flip-flop; positive-edge trigger; 3-stateProduction;


型号：	74ALVC374D
厂家：	Nexperia
描述：	Octal D-type flip-flop; positive-edge trigger; 3-stateProduction 驱动光电二极管逻辑集成电路
文件：	总15页 (文件大小：271K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

Rev. 4 — 10 July 2023

Product data sheet

1. General description

The 74ALVC374 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The

device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of

their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH

clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state.

Operation of the OE input does not affect the state of the flip-flops.

Schmitt trigger action on all inputs makes the device tolerant of slow rise and fall times.

This device is fully specified for partial power down applications using I_OFF. The I_OFFcircuitry

disables the output, preventing the potentially damaging backflow current through the device when

it is powered down.

2. Features and benefits

•

Wide supply voltage range from 1.65 V to 3.6 V

•

CMOS low power dissipation

Overvoltage tolerant inputs to 3.6 V

Direct interface with TTL levels

I_OFFcircuitry provides partial Power-down mode operation

Latch-up performance exceeds 250 mA per JESD78 Class II.A

Complies with JEDEC standards:

•

JESD8-7 (1.65 V to 1.95 V)

JESD8-5 (2.3 V to 2.7 V)

JESD8C/JESD36 (2.7 V to 3.6 V)

•

ESD protection:

•

HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

•

Multiple package options

Specified from -40 °C to +85 °C and from -40 °C to +125 °C

3. Ordering information

Table 1. Ordering information

Type number

Package

Temperature range Name

Description

Version

74ALVC374D

-40 °C to +125 °C

SO20

plastic small outline package; 20 leads;

body width 7.5 mm

SOT163-1

74ALVC374PW -40 °C to +125 °C

74ALVC374BQ -40 °C to +125 °C

TSSOP20

plastic thin shrink small outline package; 20 leads;

body width 4.4 mm

SOT360-1

SOT764-1

DHVQFN20 plastic dual in-line compatible thermal enhanced

very thin quad flat package; no leads; 20 terminals;

body 2.5 × 4.5 × 0.85 mm

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

4. Functional diagram

mna891

mna196

Fig. 1. Logic symbol

Fig. 2. IEC logic symbol

FF1

FF8

3-STATE

OUTPUTS

14 D5

Q7 19

mna892

Fig. 3. Functional diagram

FF7

FF2

FF3

FF1

FF4

FF5

FF6

FF8

mna893

Fig. 4. Logic diagram

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

2 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

5. Pinning information

5.1. Pinning

D package

PW package

SOT163-1 (SO20)

SOT360-1 (TSSOP20)

GND

aaa-035049

aaa-035050

BQ package

SOT764-1 (DHVQFN20)

terminal 1

index area

(1)

GND

aaa-035157

Transparent top view

(1) This is not a ground pin. There is no electrical or mechanical requirement to solder

the pad. In case soldered, the solder land should remain floating or connected to GND.

5.2. Pin description

Table 2. Pin description

Symbol

Description

D0, D1, D2, D3, D4, D5, D6, D7

3, 4, 7, 8, 13, 14, 17, 18

data input

clock input (LOW to HIGH, edge-triggered)

output enable input (active LOW)

3-state flip-flop output

supply voltage

Q0, Q1, Q2, Q3, Q4, Q5, Q6, Q7

2, 5, 6, 9, 12, 15, 16, 19

V_CC

GND

ground (0 V)

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

3 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

6. Functional description

Table 3. Function table

H = HIGH voltage level; h = HIGH voltage level one set-up time prior to the LOW to HIGH CP transition;

L = LOW voltage level; l = LOW voltage level one set-up time prior to the LOW to HIGH CP transition;

Z = high-impedance OFF-state; ↑ = LOW to HIGH clock transition.

Operating mode

Input

Internal flip-flop Output

↑

Load and read register

↑

Load register and disable

outputs

↑

7. Limiting values

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

Min

-0.5

-50

Max

+4.6

V_CC+ 0.5

+4.6

Unit

V_CC

V_I

supply voltage

input voltage

output voltage

[1]

V_O

output HIGH or LOW state

output 3-state

power-down mode; V_CC= 0 V

V_I< 0 V

I_IK

input clamping current

output clamping current

output current

°C

I_OK

I_O

V_O> V_CCor V_O< 0 V

V_O= 0 V to V_CC

±50

I_CC

I_GND

T_stg

P_tot

supply current

100

ground current

-100

-65

storage temperature

total power dissipation

+150

500

T_amb= -40 °C to +125 °C

[2]

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For SOT163-1 (SO20) package: P_totderates linearly with 12.3 mW/K above 109 °C.

For SOT360-1 (TSSOP20) package: P_totderates linearly with 10.0 mW/K above 100 °C.

For SOT764-1 (DHVQFN20) package: P_totderates linearly with 12.9 mW/K above 111 °C.

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

4 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

8. Recommended operating conditions

Table 5. Recommended operating conditions

Symbol Parameter

Conditions

Min

Max

3.6

Unit

V_CC

V_I

supply voltage

input voltage

output voltage

1.65

3.6

V_O

output HIGH or LOW state

output 3-state

V_CC

3.6

power-down mode; V_CC= 0 V

in free air

3.6

T_amb

ambient temperature

-40

+125

°C

ns/V

Δt/ΔV

input transition rise and fall rate

V_CC= 1.65 V to 2.7 V

V_CC= 2.7 V to 3.6 V

9. Static characteristics

Table 6. Static characteristics

At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

-40 °C to +85 °C

Typ [1]

-40 °C to +125 °C

Unit

Min

Max

Min

Max

V_IH

HIGH-level

input voltage

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V to 3.6 V

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V to 3.6 V

V_I= V_IHor V_IL

0.65 × V_CC

1.7

2.0

0.35 × V_CC

0.7

2.0

0.35 × V_CC

0.7

V_IL

LOW-level

input voltage

0.8

V_OH

HIGH-level

output voltage

I_O= -100 μA;

V_CC- 0.2

V_CC= 1.65 V to 3.6 V

I_O= -6 mA; V_CC= 1.65 V

I_O= -12 mA; V_CC= 2.3 V

I_O= -18 mA; V_CC= 2.3 V

I_O= -12 mA; V_CC= 2.7 V

I_O= -18 mA; V_CC= 3.0 V

I_O= -24 mA; V_CC= 3.0 V

V_I= V_IHor V_IL

1.25

1.8

1.7

2.2

2.4

2.2

1.51

2.10

2.01

2.53

2.76

2.68

1.25

1.8

1.7

2.2

2.4

2.2

V_OL

LOW-level

output voltage

I_O= 100 μA;

0.2

V_CC= 1.65 V to 3.6 V

I_O= 6 mA; V_CC= 1.65 V

I_O= 12 mA; V_CC= 2.3 V

I_O= 18 mA; V_CC= 2.3 V

I_O= 12 mA; V_CC= 2.7 V

I_O= 18 mA; V_CC= 3.0 V

I_O= 24 mA; V_CC= 3.0 V

0.11

0.17

0.25

0.16

0.23

0.30

±0.1

0.3

0.4

0.6

0.4

0.55

±5

0.3

0.4

0.6

0.4

0.45

0.55

±20

I_I

input leakage V_CC= 3.6 V;

current V_I= 3.6 V or GND

μA

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

5 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

Symbol Parameter

Conditions

-40 °C to +85 °C

Typ [1]

-40 °C to +125 °C

Unit

Min

Max

Min

Max

I_OZ

OFF-state

V_I= V_IHor V_IL;

±0.1

±10

±80

μA

output current V_CC= 1.65 V to 3.6 V;

V_O= 3.6 V or GND

I_OFF

I_CC

power-off

V_CC= 0 V;

±0.1

0.2

±10

±80

μA

leakage supply V_Ior V_O= 0 V to 3.6 V

supply current V_CC= 3.6 V; V_I= V_CCor GND;

I_O= 0 A

ΔI_CC

additional

per input pin;

750

supply current V_CC= 3.0 V to 3.6 V;

V_I= V_CC- 0.6 V; I_O= 0 A

C_I

input

3.5

capacitance

[1] All typical values are measured at V_CC= 3.3 V (unless stated otherwise) and T_amb= 25 °C.

10. Dynamic characteristics

Table 7. Dynamic characteristics

Voltages are referenced to GND (ground = 0 V). For test circuit see Fig. 8.

Symbol Parameter

Conditions

-40 °C to +85 °C

Typ [1]

-40 °C to +125 °C Unit

Min

Max

Min

Max

t_pd

t_en

t_dis

t_W

propagation

delay

CP to Qn; see Fig. 5

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

[2]

1.0

3.1

2.3

2.5

6.4

3.9

3.6

1.0

7.4

4.5

4.1

V_CC= 3.0 V to 3.6 V

OE to Qn; see Fig. 6

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

enable time

disable time

pulse width

set-up time

1.0

3.2

2.6

3.2

2.4

6.4

4.5

4.6

4.0

1.0

7.4

5.2

5.3

4.6

V_CC= 3.0 V to 3.6 V

OE to Qn; see Fig. 6

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

1.5

1.0

1.5

1.0

3.6

2.3

2.9

2.8

7.0

4.4

1.5

1.0

1.5

1.0

8.1

5.1

V_CC= 3.0 V to 3.6 V

CP; HIGH or LOW; see Fig. 5

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

3.8

3.3

1.1

0.9

0.8

1.2

3.8

3.3

V_CC= 3.0 V to 3.6 V

Dn to CP; see Fig. 7

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

t_su

0.8

-0.1

0.1

0.3

0.0

0.8

V_CC= 3.0 V to 3.6 V

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

6 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

Symbol Parameter

Conditions

-40 °C to +85 °C

Typ [1]

-40 °C to +125 °C Unit

Min

Max

Min

Max

t_h

hold time

Dn to CP; see Fig. 7

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

0.8

0.7

-0.1

0.1

0.8

0.7

0.4

V_CC= 3.0 V to 3.6 V

see Fig. 5

-0.1

f_max

maximum

frequency

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

100

200

300

MHz

100

150

100

150

V_CC= 3.0 V to 3.6 V

C_PD

power

per flip-flop; V_I= GND to V_CC

;

[3]

dissipation

capacitance

V_CC= 3.3 V

outputs HIGH or LOW state

outputs 3-state

[1] Typical values are measured at T_amb= 25 °C

[2] t_pdis the same as t_PHLand t_PLH

t_enis the same as t_PZHand t_PZL

t_disis the same as t_PHZand t_PLZ

[3] C_PDis used to determine the dynamic power dissipation (P_Din μW).

P_D= C_PD× V_CC²× f_i× N + Σ(C_L× V_CC²× f_o) where:

f_i= input frequency in MHz;

f_o= output frequency in MHz;

C_L= output load capacitance in pF;

V_CC= supply voltage in V;

N = number of inputs switching;

Σ(C_L× V_CC²× f_o) = sum of the outputs.

10.1. Waveforms and test circuit

1/f

max

CP input

GND

PLH

PHL

Qn output

mna894

Measurement points are given in Table 8.

V_OLand V_OHare the typical output voltage levels that occur with the output load.

Fig. 5. Clock (CP) to output (Qn) propagation delays, the clock pulse width and the maximum frequency

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

7 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

OE input

GND

PZL

PLZ

output

LOW-to-OFF

OFF-to-LOW

PHZ

PZH

output

HIGH-to-OFF

OFF-to-HIGH

GND

outputs

enabled

outputs

enabled

outputs

disabled

mna644

Measurement points are given in Table 8.

V_OLand V_OHare the typical output voltage drops that occur with the output load.

Fig. 6. Enable and disable times

CP input

GND

Dn input

GND

Qn output

mna202

Measurement points are given in Table 8.

V_OLand V_OHare the typical output voltage drops that occur with the output load.

The shaded areas indicate when the input is permitted to change for predicable output performance.

Fig. 7. Data set-up and hold times for the Dn input to the CP input

Table 8. Measurement points

Supply voltage

V_CC

Input

Output

V_M

V_x

V_y

1.65 V to 1.95 V

2.3 V to 2.7 V

2.7 V

0.5 × V_CC

2.7 V

0.5 × V_CC

1.5 V

V_OL+ 0.15 V

V_OL+ 0.3 V

V_OH- 0.15 V

V_OH- 0.3 V

3.0 V to 3.6 V

2.7 V

1.5 V

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

8 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

90 %

negative

pulse

10 %

0 V

90 %

positive

pulse

10 %

0 V

EXT

DUT

001aae331

Test data is given in Table 9.

Definitions for test circuit:

R_L= Load resistance;

C_L= Load capacitance including jig and probe capacitance;

R_T= Termination resistance should be equal to output impedance Z_oof the pulse generator;

V_EXT= External voltage for measuring switching times.

Fig. 8. Test circuit for measuring switching times

Table 9. Test data

Supply voltage

V_CC

Input

V_I

Load

C_L

V_EXT

t_r, t_f

R_L

t_PLH, t_PHL

open

t_PLZ, t_PZL

2 × V_CC

6 V

t_PHZ, t_PZH

GND

1.65 V to 1.95 V

2.3 V to 2.7 V

2.7 V

V_CC

2.7 V

≤ 2.0 ns

≤ 2.5 ns

30 pF

50 pF

1 kΩ

500 Ω

open

GND

open

GND

3.0 V to 3.6 V

open

6 V

GND

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

9 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

11. Package outline

SO20: plastic small outline package; 20 leads; body width 7.5 mm

SOT163-1

(A )

pin 1 index

detail X

10 mm

scale

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

max.

(1)

UNIT

0.3

0.1

2.45

2.25

0.49

0.36

0.32

0.23

13.0

12.6

7.6

7.4

10.65

10.00

1.1

0.4

1.1

1.0

0.9

0.4

2.65

0.1

0.25

0.01

1.27

0.05

1.4

0.25 0.25

0.1

8^o

0^o

0.012 0.096

0.004 0.089

0.019 0.013 0.51

0.014 0.009 0.49

0.30

0.29

0.419

0.394

0.043 0.043

0.016 0.039

0.035

0.016

inches

0.055

0.01 0.01 0.004

Note

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

PROJECTION

ISSUE DATE

VERSION

IEC

JEDEC

JEITA

99-12-27

03-02-19

SOT163-1

075E04

MS-013

Fig. 9. Package outline SOT163-1 (SO20)

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

10 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm

SOT360-1

(A )

pin 1 index

detail X

2.5

5 mm

scale

DIMENSIONS (mm are the original dimensions)

(1)

(2)

(1)

UNIT

max.

8^o

0^o

0.15

0.05

0.95

0.80

0.30

0.19

0.2

0.1

6.6

6.4

4.5

4.3

6.6

6.2

0.75

0.50

0.4

0.3

0.5

0.2

1.1

0.65

0.2

0.13

0.1

0.25

Notes

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

PROJECTION

ISSUE DATE

VERSION

IEC

JEDEC

JEITA

99-12-27

03-02-19

SOT360-1

MO-153

Fig. 10. Package outline SOT360-1 (TSSOP20)

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

11 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;

20 terminals; body 2.5 x 4.5 x 0.85 mm

SOT764-1

detail X

terminal 1

index area

terminal 1

index area

A B

2.5

5 mm

scale

Dimensions (mm are the original dimensions)

(1) (1)

(1)

Unit

max 1.00 0.05 0.30

4.6 3.15 2.6 1.15

0.5

nom

min

0.90 0.02 0.25 0.2 4.5 3.00 2.5 1.00 0.5 3.5 0.4 0.1 0.05 0.05 0.1

0.80 0.00 0.18 4.4 2.85 2.4 0.85 0.3

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

sot764-1_po

Issue date

References

Outline

version

European

projection

IEC

- - -

JEDEC

JEITA

- - -

03-01-27

14-12-12

SOT764-1

MO-241

Fig. 11. Package outline SOT764-1 (DHVQFN20)

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

12 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

12. Abbreviations

Table 10. Abbreviations

Acronym

Description

CMOS

DUT

ESD

HBM

Complementary Metal-Oxide Semiconductor

Device Under Test

ElectroStatic Discharge

Human Body Model

Machine Model

TTL

Transistor-Transistor Logic

13. Revision history

Table 11. Revision history

Document ID

Release date Data sheet status

20230710 Product data sheet

Change notice Supersedes

- 74ALVC374 v.3

74ALVC374 v.4

Modifications:

•

Specifications for -40 °C to +125 °C added.

Section 1 updated.

Section 2: updated; ESD specification updated according to the latest JEDEC standard.

74ALVC374 v.3

Modifications:

20210430

Product data sheet 74ALVC374 v.2

•

The format of this data sheet has been redesigned to comply with the identity

guidelines of Nexperia.

•

Legal texts have been adapted to the new company name where appropriate.

Section 1 updated.

Section 2: Reference to JESD36 removed.

Section 7: Derating values for P_tottotal power dissipation removed (errata).

Package outline drawing SOT764-1 (DHVQFN20) updated.

74ALVC374 v.2

Modifications:

20071017

Product data sheet

74ALVC374 v.1

•

The format of this data sheet has been redesigned to comply with the new identity

guidelines of NXP Semiconductors.

•

Legal texts have been adapted to the new company name where appropriate.

Section 3: DHVQFN20 package added.

Section 7: derating values added for DHVQFN20 package.

Section 11: outline drawing added for DHVQFN20 package.

74ALVC374 v.1

20020227

Product specification

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

13 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

14. Legal information

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Data sheet status

Document status Product

Definition

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

[1][2]

status [3]

Objective [short]

data sheet

Development

This document contains data from

the objective specification for

product development.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Preliminary [short]

data sheet

Qualification

Production

This document contains data from

the preliminary specification.

Product [short]

data sheet

This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Trademarks

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

14 / 15

Nexperia

74ALVC374

Octal D-type flip-flop; positive-edge trigger; 3-state

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Ordering information....................................................1

4. Functional diagram.......................................................2

5. Pinning information......................................................3

5.1. Pinning.........................................................................3

5.2. Pin description.............................................................3

6. Functional description................................................. 4

7. Limiting values............................................................. 4

8. Recommended operating conditions..........................5

9. Static characteristics....................................................5

10. Dynamic characteristics............................................ 6

10.1. Waveforms and test circuit........................................ 7

11. Package outline........................................................ 10

12. Abbreviations............................................................13

13. Revision history........................................................13

14. Legal information......................................................14

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 10 July 2023

74ALVC374

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 10 July 2023

15 / 15

74ALVC374D [NEXPERIA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E