74HC05D [NEXPERIA]
Hex inverter with open-drain outputsProduction;
| 型号： | 74HC05D |
| 厂家： | 
Nexperia |
| 描述： | Hex inverter with open-drain outputsProduction 光电二极管 逻辑集成电路 |
| 文件： | 总13页 (文件大小：224K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
74HC05
Hex inverter with open-drain outputs
Rev. 3 — 8 July 2020
Product data sheet
1. General description
The 74HC05 contains six inverters. The outputs of the 74HC05 are open-drain and can be
connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH
wired-AND functions. The open-drain outputs require pull-up resistors to perform correctly.
2. Features and benefits
•
Wide operating voltage 2.0 V to 6.0 V
•
•
•
•
CMOS input levels
Latch-up performance exceeds 100 mA per JESD 78 Class II level A
Complies with JEDEC standard no. 7A
ESD protection:
•
•
HBM JESD22-A114E exceeds 2000 V
CDM JESD22-C101C exceeds 1000 V
•
•
Multiple package options
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
74HC05D
-40 °C to +125 °C
-40 °C to +125 °C
-40 °C to +125 °C
SO14
plastic small outline package; 14 leads;
body width 3.9 mm
SOT108-1
74HC05PW
74HC05BQ
TSSOP14
DHVQFN14
plastic thin shrink small outline package; 14 leads; SOT402-1
body width 4.4 mm
plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 14 terminals;
body 2.5 × 3 × 0.85 mm
SOT762-1
Nexperia
74HC05
Hex inverter with open-drain outputs
4. Functional diagram
1A
2A
3A
1Y
2Y
3Y
2
4
6
1
3
5
4A
5A
6A
4Y
5Y
8
9
11
13
V
CC
10
12
Y
6Y
A
GND
mna525
001aaj979
Fig. 1. Logic symbol
Fig. 2. Logic diagram (one gate)
5. Pinning information
5.1. Pinning
74HC05
1
2
3
4
5
6
7
14
13
12
11
10
9
1A
1Y
V
CC
74HC05
6A
6Y
5A
5Y
4A
4Y
1
2
3
4
5
6
7
14
13
12
11
10
9
1A
1Y
V
CC
2A
6A
6Y
5A
5Y
4A
4Y
2Y
2A
2Y
3A
3A
3Y
3Y
8
GND
GND
8
001aaj980
001aak276
Fig. 3. Pin configuration SOT108-1 (SO14)
Fig. 4. Pin configuration SOT402-1 (TSSOP14)
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
2 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
74HC05
terminal 1
index area
2
3
4
5
6
13
12
11
10
9
1Y
6A
6Y
5A
5Y
4A
2A
2Y
3A
3Y
(1)
GND
001aak277
Transparent top view
(1) This is not a ground pin. There is no electrical or mechanical requirement to solder the pad. In case soldered,
the solder land should remain floating or connected to GND.
Fig. 5. Pin configuration SOT762-1 (DHVQFN14)
5.2. Pin description
Table 2. Pin description
Symbol
1A to 6A
1Y to 6Y
GND
Pin
Description
data input
1, 3, 5, 9, 11, 13
2, 4, 6, 8, 10, 12
data output
ground (0 V)
supply voltage
7
VCC
14
6. Functional description
Table 3. Function table
H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.
Input
nA
L
Output
nY
Z
H
L
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
3 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
VCC
IIK
Parameter
Conditions
Min
Max
+7
Unit
V
supply voltage
-0.5
input clamping current
output clamping current
output voltage
VI < -0.5 V or VI > VCC + 0.5 V
[1]
-
-
±20
±20
mA
mA
IOK
VO < -0.5 V or VO > VCC + 0.5 V [1]
VO
[1]
-0.5
-
VCC + 0.5 V V
IO
output current
VO < VCC + 0.5 V
25
50
mA
ICC
supply current
-
mA
mA
°C
IGND
Tstg
Ptot
ground current
-50
-65
-
-
storage temperature
total power dissipation
+150
500
[2]
mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SOT108-1 (SO14) package: Ptot derates linearly with 10.1 mW/K above 100 °C.
For SOT402-1 (TSSOP14) package: Ptot derates linearly with 7.3 mW/K above 81 °C.
For SOT762-1 (DHVQFN14) package: Ptot derates linearly with 9.6 mW/K above 98 °C.
8. Recommended operating conditions
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol
VCC
Parameter
Conditions
Min
Typ
Max
Unit
supply voltage
2.0
5.0
6.0
VCC
VCC
+125
625
139
83
V
VI
input voltage
0
0
-
V
VO
output voltage
-
V
Tamb
Δt/ΔV
ambient temperature
input transition rise and fall rate
-40
-
-
°C
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
-
1.67
-
ns/V
ns/V
ns/V
-
-
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
4 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
9. Static characteristics
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
25 °C
-40 °C to +85 °C -40 °C to +125 °C Unit
Min Typ Max
Min
1.5
3.15
4.2
-
Max
-
Min
1.5
3.15
4.2
-
Max
-
VIH
HIGH-level
input voltage
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
1.5
1.2
-
-
V
V
V
V
V
V
3.15 2.4
-
-
4.2
3.2
0.8
-
-
-
VIL
LOW-level input VCC = 2.0 V
voltage
-
-
-
0.5
0.5
1.35
1.8
0.5
1.35
1.8
VCC = 4.5 V
2.1 1.35
-
-
VCC = 6.0 V
2.8
1.8
-
-
VOL
LOW-level
output voltage
VI = VIH or VIL
IO = 20 μA; VCC = 2.0 V
-
-
-
-
-
-
0
0
0
0.1
0.1
0.1
-
-
-
-
-
-
0.1
0.1
-
-
-
-
-
-
0.1
0.1
0.1
0.4
0.4
±1
V
IO = 20 μA; VCC = 4.5 V
IO = 20 μA; VCC = 6.0 V
V
0.1
V
IO = 4.0 mA; VCC = 4.5 V
IO = 5.2 mA; VCC = 6.0 V
VI = VCC or GND; VCC = 6.0 V
0.15 0.26
0.16 0.26
0.33
0.33
±1
V
V
II
input leakage
current
-
±0.1
±0.5
2.0
-
μA
IOZ
ICC
CI
OFF-state
VI = VIL; VO = VCC or GND;
output current VCC = 6.0 V
-
-
-
-
-
-
-
±5.0
20
-
-
-
-
±10
40
-
μA
μA
pF
supply current VI = VCC or GND; IO = 0 A;
VCC = 6.0 V
-
input
3.5
capacitance
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
5 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
10. Dynamic characteristics
Table 7. Dynamic characteristics
GND = 0 V; for test circuit see Fig. 7.
Symbol Parameter
Conditions
25 °C
Typ
-40 °C to +125 °C Unit
Max Max
(85 °C) (125 °C)
Min
Max
tPLZ
tPZL
tTHL
CPD
LOW to OFF-state nA to nY; see Fig. 6
propagation delay
VCC = 2.0 V
-
-
-
20
11
10
90
18
15
115
23
135
27
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
20
23
OFF-state to LOW nA to nY; see Fig. 6
propagation delay
VCC = 2.0 V
-
-
-
22
9
90
18
15
115
23
135
27
ns
ns
ns
VCC = 4.5 V
VCC = 6.0 V
8
20
23
HIGH to LOW
output transition
time
see Fig. 6
VCC = 2.0 V
-
-
-
-
18
6
75
15
13
-
95
19
16
-
110
22
19
-
ns
ns
ns
pF
VCC = 4.5 V
VCC = 6.0 V
5
power dissipation per inverter; VI = GND to VCC
;
[1]
4
capacitance VCC = 5.0 V
[1] CPD is used to determine the dynamic power dissipation (PD in μW).
PD = CPD x VCC 2 x fi x N + Σ(0.5 x CL x VO 2 x fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
VO = output voltage in V (output HIGH);
VCC = supply voltage in V;
N = number of inputs switching;
RL = load resistance in MΩ;
CL = load capacitance in pF;
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
6 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
10.1. Waveforms and test circuit
V
I
nA input
GND
V
M
t
t
PZL
PLZ
V
CC
90 %
nY output
V
M
10 %
V
X
V
OL
t
THL
001aaj981
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 6. The input nA to output nY propagation delays and output transition times
Table 8. Measurement points
Input
VM
Output
VM
VX
0.5VCC
0.5VCC
0.1VCC
t
W
V
I
90 %
negative
pulse
V
V
V
M
M
10 %
0 V
t
t
r
f
t
t
f
r
V
I
90 %
positive
pulse
V
M
M
10 %
0 V
t
W
V
V
CC
CC
V
I
V
O
R
L
S1
G
open
DUT
R
T
C
L
001aad983
Test data is given in Table 9.
Definitions test circuit:
RT = termination resistance should be equal to output impedance Zo of the pulse generator.
CL = load capacitance including jig and probe capacitance.
RL = Load resistance.
Fig. 7. Test circuit for measuring switching times
Table 9. Test data
Input
VI
Load
CL
S1 position
tPZL, tPLZ
VCC
tr, tf
RL
VCC
6 ns
50 pF
1 kΩ
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
7 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
11. Package outline
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
D
E
A
X
v
c
y
H
M
A
E
Z
8
14
Q
A
2
A
(A )
3
A
1
pin 1 index
θ
L
p
L
1
7
e
detail X
w
M
b
p
0
2.5
scale
5 mm
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
A
(1)
(1)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
p
Q
v
w
y
Z
θ
1
2
3
p
E
max.
0.25
0.10
1.45
1.25
0.49
0.36
0.25
0.19
8.75
8.55
4.0
3.8
6.2
5.8
1.0
0.4
0.7
0.6
0.7
0.3
mm
1.75
1.27
0.05
1.05
0.25
0.25
0.1
0.25
0.01
8o
0o
0.010 0.057
0.004 0.049
0.019 0.0100 0.35
0.014 0.0075 0.34
0.16
0.15
0.244
0.228
0.039 0.028
0.016 0.024
0.028
0.012
inches
0.041
0.01 0.01 0.004
0.069
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-19
SOT108-1
076E06
MS-012
Fig. 8. Package outline SOT108-1 (SO14)
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
8 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
SOT402-1
D
E
A
X
c
y
H
v
M
A
E
Z
8
14
Q
(A )
3
A
2
A
A
1
pin 1 index
θ
L
p
L
1
7
detail X
w
M
b
p
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
A
(1)
(2)
(1)
UNIT
A
A
A
b
c
D
E
e
H
L
L
Q
v
w
y
Z
θ
1
2
3
p
E
p
max.
8o
0o
0.15
0.05
0.95
0.80
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
6.6
6.2
0.75
0.50
0.4
0.3
0.72
0.38
mm
1.1
0.65
1
0.2
0.13
0.1
0.25
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
REFERENCES
OUTLINE
EUROPEAN
PROJECTION
ISSUE DATE
VERSION
IEC
JEDEC
JEITA
99-12-27
03-02-18
SOT402-1
MO-153
Fig. 9. Package outline SOT402-1 (TSSOP14)
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
9 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
14 terminals; body 2.5 x 3 x 0.85 mm
SOT762-1
B
A
E
D
A
A
1
c
detail X
terminal 1
index area
C
terminal 1
index area
e
1
v
w
C A
C
B
y
y
C
1
e
b
2
6
L
1
7
8
E
h
e
14
k
13
9
D
h
X
k
0
2
4 mm
w
scale
Dimensions (mm are the original dimensions)
(1) (1)
(1)
Unit
A
A
b
c
D
D
h
E
E
e
e
k
L
v
y
y
1
1
h
1
max
nom
min
1
0.05 0.30
0.02 0.25 0.2 3.0 1.50 2.5 1.00 0.5
0.00 0.18 2.9 1.35 2.4 0.85
3.1 1.65 2.6 1.15
0.5
0.4 0.1 0.05 0.05 0.1
0.2 0.3
mm
2
Note
sot762-1_po
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
References
Outline
version
European
projection
Issue date
IEC
JEDEC
JEITA
15-04-10
15-05-05
SOT762-1
MO-241
Fig. 10. Package outline SOT762-1 (DHVQFN14)
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
10 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
12. Abbreviations
Table 10. Abbreviations
Acronym
CDM
Description
Charged Device Model
CMOS
DUT
Complementary Metal-Oxide Semiconductor
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
13. Revision history
Table 11. Revision history
Document ID
74HC05 v.3
Release date
20200708
Data sheet status
Change notice
Supersedes
Product data sheet
-
74HC05 v.2
Modifications:
•
The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
•
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Section 1 and Section 2 updated.
Table 4: Derating values for Ptot total power dissipation have been updated.
Table 6: Conditions for IOZ corrected.
Package outline drawing of SOT762-1 (Fig. 10) updated.
74HC05 v.2
20090618
Added type numbers 74HC05PW (TSSOP14 package) and 74HC05BQ (DHVQFN14 package)
20090427 Product data sheet
Product data sheet
-
74HC05 v.1
Modifications:
•
74HC05 v.1
-
-
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
11 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
14. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
12 / 13
Nexperia
74HC05
Hex inverter with open-drain outputs
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Functional diagram.......................................................2
5. Pinning information......................................................2
5.1. Pinning.........................................................................2
5.2. Pin description.............................................................3
6. Functional description................................................. 3
7. Limiting values............................................................. 4
8. Recommended operating conditions..........................4
9. Static characteristics....................................................5
10. Dynamic characteristics............................................ 6
10.1. Waveforms and test circuit........................................ 7
11. Package outline.......................................................... 8
12. Abbreviations............................................................11
13. Revision history........................................................11
14. Legal information......................................................12
© Nexperia B.V. 2020. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 8 July 2020
©
74HC05
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2020. All rights reserved
Product data sheet
Rev. 3 — 8 July 2020
13 / 13
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明