74LVC2244APW [NEXPERIA]

Octal buffer/line driver; 30 Ohm series termination; 5 V tolerant input/output; 3-stateProduction;


型号：	74LVC2244APW
厂家：	Nexperia
描述：	Octal buffer/line driver; 30 Ohm series termination; 5 V tolerant input/output; 3-stateProduction
文件：	总14页 (文件大小：250K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant

input/output; 3-state

Rev. 6 — 20 September 2021

Product data sheet

1. General description

The 74LVC2244A is an 8-bit buffer/line driver with 3-state outputs. The device can be used as

two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE),

each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a

high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature

allows the use of these devices as translators in mixed 3.3 V and 5 V environments.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device is fully specified for partial power down applications using I_OFF. The I_OFFcircuitry

disables the output, preventing the potentially damaging backflow current through the device when

it is powered down.

2. Features and benefits

•

Overvoltage tolerant inputs to 5.5 V

•

Wide supply voltage range from 1.2 V to 3.6 V

CMOS low-power consumption

Direct interface with TTL levels

Integrated 30 Ω termination resistors

I_OFFcircuitry provides partial Power-down mode operation

Complies with JEDEC standard:

•

JESD8-7A (1.65 V to 1.95 V)

JESD8-5A (2.3 V to 2.7 V)

JESD8-C/JESD36 (2.7 V to 3.6 V)

•

ESD protection:

•

HBM JESD22-A114F exceeds 2000 V

MM JESD22-A115B exceeds 200 V

CDM JESD22-C101E exceeds 1000 V

•

Specified from -40 °C to +85 °C and -40 °C to +125 °C

3. Ordering information

Table 1. Ordering information

Type number

Package

Temperature range Name

Description

Version

74LVC2244AD

-40 °C to +125 °C

SO20

plastic small outline package; 20 leads;

body width 7.5 mm

SOT163-1

74LVC2244APW -40 °C to +125 °C

74LVC2244ABQ -40 °C to +125 °C

TSSOP20

plastic thin shrink small outline package; 20 leads;

body width 4.4 mm

SOT360-1

SOT764-1

DHVQFN20 plastic dual in-line compatible thermal enhanced

very thin quad flat package; no leads; 20 terminals;

body 2.5 × 4.5 × 0.85 mm

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

4. Functional diagram

1A0

1A1

1A2

1Y0

1Y1

1Y2

1Y3

1A3

1OE

2A0

2A1

2Y0

2Y1

2Y2

2Y3

2A2

2A3

2OE

mna169

mna170

Fig. 1. IEC logic symbol

Fig. 2. Logic diagram

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

2 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

5. Pinning information

5.1. Pinning

74LVC2244A

terminal 1

index area

1A0

2OE

1Y0

2A0

1Y1

2A1

1Y2

2A2

1Y3

2Y0

1A1

2Y1

1A2

2Y2

1A3

2Y3

74LVC2244A

1OE

1A0

2Y0

1A1

2Y1

1A2

2Y2

1A3

2Y3

GND

2OE

1Y0

2A0

1Y1

2A1

1Y2

2A2

1Y3

2A3

(1)

GND

001aad085

Transparent top view

(1) This is not a ground pin. There is no electrical or

mechanical requirement to solder the pad. In case

soldered, the solder land should remain floating or

connected to GND.

001aad084

Fig. 3. Pin configuration SOT163-1 (SO20) and

SOT360-1 (TSSOP20)

Fig. 4. Pin configuration SOT764-1 (DHVQFN20)

5.2. Pin description

Table 2. Pin description

Symbol

Description

1OE

output enable input (active LOW)

data input

2OE

1A0, 1A1, 1A2, 1A3

2A0, 2A1, 2A2, 2A3

1Y0, 1Y1, 1Y2, 1Y3

2Y0, 2Y1, 2Y2, 2Y3

GND

2, 4, 6, 8

17, 15, 13, 11

18, 16, 14, 12

3, 5, 7, 9

data input

data output

ground (0 V)

V_CC

supply voltage

6. Functional description

Table 3. Functional table

H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state

Input

nOE

Output

nAn

nYn

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

3 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

7. Limiting values

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

Min

-0.5

-50

-0.5

Max

+6.5

Unit

V_CC

I_IK

supply voltage

input clamping current

input voltage

V_I< 0 V

V_I

[1]

+6.5

±50

I_OK

V_O

output clamping current

output voltage

V_O> V_CCor V_O< 0 V

output HIGH or LOW state

output 3-state

[2]

-0.5

V_CC+ 0.5

+6.5

±50

I_O

output current

V_O= 0 V to V_CC

°C

I_CC

I_GND

T_stg

P_tot

supply current

100

ground current

-100

-65

storage temperature

total power dissipation

+150

500

T_amb= -40 °C to +125 °C

[3]

[1] The minimum input voltage ratings may be exceeded if the input current ratings are observed.

[2] The output voltage ratings may be exceeded if the output current ratings are observed.

[3] For SOT163-1 (SO20) package: P_totderates linearly with 12.3 mW/K above 109 °C.

For SOT360-1 (TSSOP20) package: P_totderates linearly with 10.0 mW/K above 100 °C.

For SOT764-1 (DHVQFN20) package: P_totderates linearly with 12.9 mW/K above 111 °C.

8. Recommended operating conditions

Table 5. Recommended operating conditions

Symbol Parameter

Conditions

Min

1.65

1.2

Typ

Max

3.6

Unit

V_CC

supply voltage

functional

V_I

input voltage

5.5

V_CC

5.5

+125

V_O

output voltage

output HIGH or LOW state

output 3-state

T_amb

ambient temperature

-40

°C

ns/V

Δt/ΔV

input transition rise and fall

rate

V_CC= 1.65 V to 2.7 V

V_CC= 2.7 V to 3.6 V

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

4 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

9. Static characteristics

Table 6. Static characteristics

At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

-40 °C to +85 °C

-40 °C to +125 °C Unit

Min

Typ [1]

Max

Min

Max

V_IH

HIGH-level input V_CC= 1.2 V

voltage

1.08

V_CC= 1.65 V to 1.95 V

0.65V_CC

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V to 3.6 V

1.7

2.0

V_IL

LOW-level input V_CC= 1.2 V

0.12

0.35V_CC

0.7

0.12

0.35V_CC

0.7

voltage

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V to 3.6 V

V_I= V_IHor V_IL

0.8

V_OH

HIGH-level

output voltage

I_O= -100 μA;

V_CC- 0.2

V_CC

V_CC- 0.3

V_CC= 1.65 V to 3.6 V

I_O= -2 mA; V_CC= 1.65 V

I_O= -4 mA; V_CC= 2.3 V

I_O= -6 mA; V_CC= 2.7 V

I_O= -9 mA; V_CC= 2.7 V

I_O= -12 mA; V_CC= 3.0 V

V_I= V_IHor V_IL

1.2

1.8

2.2

2.4

2.2

1.05

1.65

2.05

2.25

2.0

V_OL

LOW-level

output voltage

I_O= 100 μA;

0.2

0.3

V_CC= 1.65 V to 3.6 V

I_O= 2 mA; V_CC= 1.65 V

I_O= 4 mA; V_CC= 2.3 V

0.45

0.6

0.65

0.8

I_O= 6 mA; V_CC= 2.7 V

0.4

0.6

I_O= 12 mA; V_CC= 3.0 V

V_CC= 3.6 V; V_I= 5.5 V or GND

0.55

±5

0.8

I_I

input leakage

current

±0.1

±20

μA

I_OZ

I_OFF

I_CC

ΔI_CC

C_I

OFF-state

output current

V_I= V_IHor V_IL; V_CC= 3.6 V;

V_O= 5.5 V or GND

±0.1

0.1

±5

±10

±20

μA

power-off

leakage current

V_CC= 0 V; V_Ior V_O= 5.5 V

supply current

V_CC= 3.6 V; V_I= V_CCor GND;

I_O= 0 A

additional

supply current

per input pin; V_CC= 2.7 V to 3.6 V;

V_I= V_CC- 0.6 V; I_O= 0 A

500

5000

input

capacitance

V_CC= 0 V to 3.6 V;

V_I= GND to V_CC

4.0

[1] All typical values are measured at V_CC= 3.3 V (unless stated otherwise) and T_amb= 25 °C.

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

5 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

10. Dynamic characteristics

Table 7. Dynamic characteristics

Voltages are referenced to GND (ground = 0 V). For test circuit see Fig. 7.

Symbol Parameter

Conditions

-40 °C to +85 °C

-40 °C to +125 °C Unit

Min Typ [1] Max

Min

Max

t_pd

t_en

t_dis

propagation delay

nAn to nYn; see Fig. 5

V_CC= 1.2 V

[2]

7.8

4.1

3.5

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

1.9

1.5

17.7

8.7

6.4

5.5

1.9

1.5

18.6

9.6

7.0

8.0

V_CC= 3.0 V to 3.6 V

nOE to nYn; see Fig. 6

V_CC= 1.2 V

enable time

8.9

5.0

5.1

4.0

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

2.3

1.9

1.5

1.0

19.7

10.3

8.1

2.3

1.9

1.5

1.0

20.7

11.4

9.0

V_CC= 3.0 V to 3.6 V

nOE to nYn; see Fig. 6

V_CC= 1.2 V

7.1

10.5

disable time

9.0

4.7

2.6

3.4

3.2

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

2.9

1.0

1.5

9.3

5.0

6.4

5.4

1.0

2.9

1.0

1.5

9.8

5.6

7.0

8.0

1.5

V_CC= 3.0 V to 3.6 V

per input; V_I= GND to V_CC

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 3.0 V to 3.6 V

t_sk(o)

C_PD

output skew time

[3]

[4]

power dissipation

capacitance

1.8

4.9

7.7

[1] Typical values are measured at T_amb= 25 °C and V_CC= 1.2 V, 1.8 V, 2.5 V, 2.7 V, and 3.3 V respectively.

[2] t_pdis the same as t_PLHand t_PHL

t_enis the same as t_PZLand t_PZH

t_disis the same as t_PLZand t_PHZ

[3] Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design.

[4] C_PDis used to determine the dynamic power dissipation (P_Din μW).

P_D= C_PD× V_CC²× f_i× N + Σ(C_L× V_CC²× f_o) where:

f_i= input frequency in MHz; f_o= output frequency in MHz

C_L= output load capacitance in pF

V_CC= supply voltage in Volts

N = number of inputs switching

Σ(C_L× V_CC²× f_o) = sum of the outputs

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

6 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

10.1. Waveforms and test circuit

nAn input

GND

PLH

PHL

nYn output

mna171

Measurement points are given in Table 8.

V_OLand V_OHare typical output voltage levels that occur with the output load.

Fig. 5. The input (nAn) to output (nYn) propagation delays

nOE input

GND

PLZ

PZL

output

LOW-to-OFF

OFF-to-LOW

PHZ

PZH

output

HIGH-to-OFF

OFF-to-HIGH

GND

outputs

enabled

outputs

enabled

outputs

disabled

mna362

Measurement points are given in Table 8.

V_OLand V_OHare typical output voltage levels that occur with the output load.

Fig. 6. 3-state enable and disable times

Table 8. Measurement points

Supply voltage

V_CC

Input

V_I

Output

V_M

V_X

V_Y

1.2 V

V_CC

2.7 V

0.5 × V_CC

1.5 V

0.5 × V_CC

1.5 V

V_OL+ 0.15 V

V_OL+ 0.3 V

V_OH- 0.15 V

V_OH- 0.3 V

1.65 V to 1.95 V

2.3 V to 2.7 V

2.7 V

3.0 V to 3.6 V

1.5 V

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

7 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

90 %

negative

pulse

10 %

0 V

90 %

positive

pulse

10 %

0 V

EXT

DUT

001aae331

Test data is given in Table 9.

Definitions for test circuit:

R_L= Load resistance.

C_L= Load capacitance including jig and probe capacitance.

R_T= Termination resistance should be equal to output impedance Z_oof the pulse generator.

V_EXT= External voltage for measuring switching times.

Fig. 7. Test circuit for measuring switching times

Table 9. Test data

Supply voltage

Input

V_I

Load

C_L

V_EXT

t_r, t_f

R_L

t_PLH, t_PHL

open

t_PLZ, t_PZL

2 × V_CC

t_PHZ, t_PZH

GND

1.2 V

V_CC

2.7 V

≤ 2 ns

≤ 2.5 ns

30 pF

50 pF

1 kΩ

500 Ω

1.65 V to 1.95 V

2.3 V to 2.7 V

2.7 V

open

GND

open

GND

open

GND

3.0 V to 3.6 V

open

GND

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

8 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

11. Package outline

SO20: plastic small outline package; 20 leads; body width 7.5 mm

SOT163-1

(A )

pin 1 index

detail X

10 mm

scale

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

max.

(1)

UNIT

0.3

0.1

2.45

2.25

0.49

0.36

0.32

0.23

13.0

12.6

7.6

7.4

10.65

10.00

1.1

0.4

1.1

1.0

0.9

0.4

2.65

0.1

0.25

0.01

1.27

0.05

1.4

0.25 0.25

0.1

8^o

0^o

0.012 0.096

0.004 0.089

0.019 0.013 0.51

0.014 0.009 0.49

0.30

0.29

0.419

0.394

0.043 0.043

0.016 0.039

0.035

0.016

inches

0.055

0.01 0.01 0.004

Note

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

PROJECTION

ISSUE DATE

VERSION

IEC

JEDEC

JEITA

99-12-27

03-02-19

SOT163-1

075E04

MS-013

Fig. 8. Package outline SOT163-1 (SO20)

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

9 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm

SOT360-1

(A )

pin 1 index

detail X

2.5

5 mm

scale

DIMENSIONS (mm are the original dimensions)

(1)

(2)

(1)

UNIT

max.

8^o

0^o

0.15

0.05

0.95

0.80

0.30

0.19

0.2

0.1

6.6

6.4

4.5

4.3

6.6

6.2

0.75

0.50

0.4

0.3

0.5

0.2

1.1

0.65

0.2

0.13

0.1

0.25

Notes

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

PROJECTION

ISSUE DATE

VERSION

IEC

JEDEC

JEITA

99-12-27

03-02-19

SOT360-1

MO-153

Fig. 9. Package outline SOT360-1 (TSSOP20)

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

10 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;

20 terminals; body 2.5 x 4.5 x 0.85 mm

SOT764-1

detail X

terminal 1

index area

terminal 1

index area

C A

2.5

5 mm

scale

Dimensions (mm are the original dimensions)

(1) (1)

(1)

Unit

max 1.00 0.05 0.30

4.6 3.15 2.6 1.15

0.5

nom

min

0.90 0.02 0.25 0.2 4.5 3.00 2.5 1.00 0.5 3.5 0.4 0.1 0.05 0.05 0.1

0.80 0.00 0.18 4.4 2.85 2.4 0.85 0.3

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

sot764-1_po

Issue date

References

Outline

version

European

projection

IEC

- - -

JEDEC

JEITA

- - -

03-01-27

14-12-12

SOT764-1

MO-241

Fig. 10. Package outline SOT764-1 (DHVQFN20)

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

11 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

12. Abbreviations

Table 10. Abbreviations

Acronym

CDM

CMOS

DUT

Description

Charged Device Model

Complementary Metal-Oxide Semiconductor

Device Under Test

ESD

ElectroStatic Discharge

Human Body Model

HBM

Machine Model

TTL

Transistor-Transistor Logic

13. Revision history

Table 11. Revision history

Document ID

Release date Data sheet status

20210920 Product data sheet

Change notice Supersedes

- 74LVC2244A v.5

74LVC2244A v.6

Modifications:

•

The format of this data sheet has been redesigned to comply with the identity

guidelines of Nexperia.

•

Legal texts have been adapted to the new company name where appropriate.

Section 1 updated.

Type number 74LVC2244ADB (SOT339-1/SSOP20) removed.

Section 7: Derating values for P_tottotal power dissipation updated.

Table 8: Measurement points table added.

Fig. 10: Package outline drawing SOT764-1 (DHVQFN20) updated.

74LVC2244A v.5

Modifications:

20111103

Product data sheet

74LVC2244A v.4

•

The format of this document has been redesigned to comply with the new identity

guidelines of NXP Semiconductors.

•

Legal texts have been adapted to the new company name where appropriate.

Table 4, Table 5, Table 6, Table 7 and Table 9: values added for lower voltage ranges.

74LVC2244A v.4

74LVC2244A v.3

74LVC2244A v.2

74LVC2244A v.1

20040407

20021213

20020618

19990930

Product specification

74LVC2244A v.3

74LVC2244A v.2

74LVC2244A v.1

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

12 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

14. Legal information

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Data sheet status

Document status Product

Definition

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

[1][2]

status [3]

Objective [short]

data sheet

Development

This document contains data from

the objective specification for

product development.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Preliminary [short]

data sheet

Qualification

Production

This document contains data from

the preliminary specification.

Product [short]

data sheet

This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Trademarks

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

13 / 14

Nexperia

74LVC2244A

Octal buffer/line driver; 30 Ω series termination; 5 V tolerant input/output; 3-state

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Ordering information....................................................1

4. Functional diagram.......................................................2

5. Pinning information......................................................3

5.1. Pinning.........................................................................3

5.2. Pin description.............................................................3

6. Functional description................................................. 3

7. Limiting values............................................................. 4

8. Recommended operating conditions..........................4

9. Static characteristics....................................................5

10. Dynamic characteristics............................................ 6

10.1. Waveforms and test circuit........................................ 7

11. Package outline.......................................................... 9

12. Abbreviations............................................................12

13. Revision history........................................................12

14. Legal information......................................................13

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 20 September 2021

74LVC2244A

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 6 — 20 September 2021

14 / 14

74LVC2244APW [NEXPERIA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E