74LVC3G07DC-Q100 [NEXPERIA]

Triple buffer with open-drain outputProduction;


型号：	74LVC3G07DC-Q100
厂家：	Nexperia
描述：	Triple buffer with open-drain outputProduction 光电二极管逻辑集成电路
文件：	总11页 (文件大小：196K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

74LVC3G07-Q100

Triple buffer with open-drain output

Rev. 3 — 23 October 2018

Product data sheet

1. General description

The 74LVC3G07-Q100 provides three non-inverting buffers.

The output of the device is an open-drain and can be connected to other open-drain outputs to

implement active-LOW wired-OR or active-HIGH wired-AND functions.

Input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a

mixed 3.3 V and 5 V environment.

Schmitt trigger action at all inputs makes the circuit tolerant for slower input rise and fall time.

This device is fully specified for partial power-down applications using I_OFF. The I_OFFcircuitry

disables the output, preventing the damaging backflow current through the device when it is

powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100

(Grade 1) and is suitable for use in automotive applications.

2. Features and benefits

•

Automotive product qualification in accordance with AEC-Q100 (Grade 1)

Specified from -40 °C to +85 °C and from -40 °C to +125 °C

•

Wide supply voltage range from 1.65 V to 5.5 V

5 V tolerant input/output for interfacing with 5 V logic

High noise immunity

Complies with JEDEC standard:

•

JESD8-7 (1.65 V to 1.95 V)

JESD8-5 (2.3 V to 2.7 V)

JESD8-B/JESD36 (2.7 V to 3.6 V).

•

-24 mA output drive (V_CC= 3.0 V)

CMOS low power consumption

Latch-up performance exceeds 250 mA

Direct interface with TTL levels

Inputs accept voltages up to 5 V

ESD protection:

•

MIL-STD-883, method 3015 exceeds 2000 V

HBM JESD22-A114F exceeds 2000 V

MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

3. Ordering information

Table 1. Ordering information

Type number

Package

Temperature range Name

Description

Version

74LVC3G07DP-Q100 -40 °C to +125 °C

TSSOP8

plastic thin shrink small outline package; 8 leads;

body width 3 mm; lead length 0.5 mm

SOT505-2

74LVC3G07DC-Q100 -40 °C to +125 °C

VSSOP8

plastic very thin shrink small outline package;

8 leads; body width 2.3 mm

SOT765-1

4. Marking

Table 2. Marking codes

Type number

Marking code [1]

74LVC3G07DP-Q100

74LVC3G07DC-Q100

V07

[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.

5. Functional diagram

GND mna591

001aah762

001aah763

Fig. 1. Logic symbol

Fig. 2. IEC logic symbol

Fig. 3. Logic diagram (one driver)

6. Pinning information

6.1. Pinning

74LVC3G07-Q100

GND

aaa-006019

Fig. 4. Pin configuration SOT505-2 (TSSOP8) and SOT765-1 (VSSOP8)

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

2 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

6.2. Pin description

Table 3. Pin description

Symbol

1, 3, 6

Description

data input

1A, 2A, 3A

GND

ground (0 V)

data output

supply voltage

1Y, 2Y, 3Y

V_CC

7, 5, 2

7. Functional description

Table 4. Function table

H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.

Input nA

Output nY

8. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

Min

-0.5

-50

-0.5

-50

-0.5

Max

+6.5

Unit

V_CC

I_IK

supply voltage

input clamping current

input voltage

V_I< 0 V

V_I

[1]

+6.5

I_OK

V_O

output clamping current

output voltage

V_O< 0 V

Active mode

[1]

+6.5

Power-down mode; V_CC= 0 V

V_O= 0 V to 6.5 V

I_O

output current

°C

I_CC

I_GND

T_stg

P_tot

supply current

100

ground current

-100

-65

storage temperature

total power dissipation

+150

250

T_amb= -40 °C to +125 °C

[2]

[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For TSSOP8 package: above 55 °C the value of P_totderates linearly with 2.5 mW/K.

For VSSOP8 package: above 110 °C the value of P_totderates linearly with 8 mW/K.

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

3 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

9. Recommended operating conditions

Table 6. Operating conditions

Symbol Parameter

Conditions

Min

Max

5.5

+125

Unit

V_CC

V_I

supply voltage

input voltage

output voltage

1.65

V_O

Active mode

Power-down mode; V_CC= 0 V

T_amb

ambient temperature

-40

°C

ns/V

Δt/ΔV

input transition rise and fall rate

V_CC= 1.65 V to 2.7 V

V_CC= 2.7 V to 5.5 V

10. Static characteristics

Table 7. Static characteristics

At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

Symbol Parameter

Conditions

T_amb= -40 °C to +85 °C

T_amb

Unit

-40 °C to +125 °C

Min

Typ [1]

Max

Min

Max

V_IH

HIGH-level input

voltage

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V to 3.6 V

V_CC= 4.5 V to 5.5 V

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V to 3.6 V

V_CC= 4.5 V to 5.5 V

0.65V_CC

1.7

2.0

0.7V_CC

V_IL

LOW-level input

voltage

0.35V_CC

0.7

0.35V_CC

0.7

0.8

0.3V_CC

V_OL

LOW-level output V_I= V_IHor V_IL

voltage

I_O= 100 μA;

0.1

V_CC= 1.65 V to 5.5 V

I_O= 4 mA; V_CC= 1.65 V

I_O= 8 mA; V_CC= 2.3 V

I_O= 12 mA; V_CC= 2.7 V

I_O= 24 mA; V_CC= 3.0 V

I_O= 32 mA; V_CC= 4.5 V

0.45

0.3

0.70

0.45

0.60

0.80

0.4

0.55

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

4 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

Symbol Parameter

Conditions

T_amb= -40 °C to +85 °C

T_amb

Unit

-40 °C to +125 °C

Min

Typ [1]

Max

Min

Max

I_I

input leakage

current

V_I= 5.5 V or GND;

V_CC= 0 V to 5.5 V

±0.1

±1

μA

I_OZ

OFF-state output V_I= V_IHor V_IL;

±0.1

±2

current

V_O= V_CCor GND;

V_CC= 5.5 V

I_OFF

I_CC

power-off leakage V_Ior V_O= 5.5 V; V_CC= 0 V

current

±0.1

0.1

±2

μA

supply current

V_I= 5.5 V or GND; I_O= 0 A;

V_CC= 1.65 V to 5.5 V

ΔI_CC

C_I

additional supply

current

per pin; V_CC= 2.3 V to 5.5 V;

V_I= V_CC- 0.6 V; I_O= 0 A

500

input capacitance

2.5

[1] All typical values are measured at V_CC= 3.3 V and at T_amb= 25 °C.

11. Dynamic characteristics

Table 8. Dynamic characteristics

Voltages are referenced to GND (ground = 0 V). For test circuit see Fig. 6.

Symbol Parameter

Conditions

T_amb= -40 °C to +85 °C

T_amb

Unit

-40 °C to +125 °C

Min

Typ [1]

Max

Min

Max

t_pd

propagation

delay

nA to nY; see Fig. 5

V_CC= 1.65 V to 1.95 V

V_CC= 2.3 V to 2.7 V

V_CC= 2.7 V

[2]

1.0

0.5

1.0

0.5

2.9

1.7

2.3

2.1

1.5

6.5

6.7

4.3

4.2

3.7

2.9

1.0

0.5

1.0

0.5

8.4

5.5

5.3

4.7

3.7

V_CC= 3.0 V to 3.6 V

V_CC= 4.5 V to 5.5 V

C_PD

power

V_I= GND to V_CC; V_CC= 3.3 V [3]

dissipation

capacitance

[1] Typical values are measured at T_amb= 25 °C and V_CC= 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.

[2] t_pdis the same as t_PLZand t_PZL

[3] C_PDis used to determine the dynamic power dissipation (P_Din μW).

P_D= C_PD× V_CC²× f_i× N + Σ(C_L× V_CC²× f_o) where:

f_i= input frequency in MHz;

f_o= output frequency in MHz;

C_L= output load capacitance in pF;

V_CC= supply voltage in V;

N = number of inputs switching;

Σ(C_L× V_CC²× f_o) = sum of outputs.

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

5 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

11.1. Waveforms and test circuit

nA input

GND

PZL

PLZ

nY output

mna528

Measurement points are given in Table 9.

V_OLis the typical output voltage level that occurs with the output load.

Fig. 5. The input (nA) to output (nY) propagation delays

Table 9. Measurement points

Supply voltage

V_CC

Input

Output

V_M

V_X

1.65 V to 1.95 V

2.3 V to 2.7 V

2.7 V

0.5 × V_CC

1.5 V

0.5 × V_CC

1.5 V

V_OL+ 0.15 V

V_OL+ 0.3 V

3.0 V to 3.6 V

4.5 V to 5.5 V

1.5 V

0.5 × V_CC

EXT

DUT

mna616

Test data is given in Table 10.

Definitions for test circuit:

R_L= Load resistance.

C_L= Load capacitance including jig and probe capacitance.

R_T= Termination resistance should be equal to the output impedance Z_oof the pulse generator.

V_EXT= External voltage for measuring switching times.

Fig. 6. Test circuit for measuring switching times

Table 10. Test data

Supply voltage

V_CC

Input

V_I

Load

C_L

V_EXT

t_r= t_f

R_L

t_PZL, t_PLZ

2 × V_CC

6 V

1.65 V to 1.95 V

2.3 V to 2.7 V

2.7 V

V_CC

2.7 V

V_CC

≤ 2.0 ns

≤ 2.5 ns

30 pF

50 pF

1 kΩ

500 Ω

3.0 V to 3.6 V

4.5 V to 5.5 V

6 V

2 × V_CC

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

6 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

12. Package outline

TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm

SOT505-2

(A )

pin 1 index

detail X

2.5

5 mm

scale

DIMENSIONS (mm are the original dimensions)

(1)

UNIT

max.

0.15

0.00

0.95

0.75

0.38

0.22

0.18

0.08

3.1

2.9

3.1

2.9

4.1

3.9

0.47

0.33

0.70

0.35

8°

0°

1.1

0.65

0.5

0.2

0.13

0.1

0.25

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

PROJECTION

ISSUE DATE

VERSION

IEC

JEDEC

JEITA

02-01-16

SOT505-2

- - -

Fig. 7. Package outline SOT505-2 (TSSOP8)

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

7 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm

SOT765-1

(A )

pin 1 index

detail X

5 mm

scale

Dimensions (mm are the original dimensions)

(1)

(2)

(1)

Unit

max.

max

mm nom

min

0.15 0.85

0.00 0.60

0.27 0.23 2.1 2.4

0.17 0.08 1.9 2.2

3.2

3.0

0.40 0.21

0.15 0.19

0.4

8°

0°

0.12

0.5

0.4

0.2 0.08 0.1

0.1

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.

sot765-1_po

Issue date

References

Outline

version

European

projection

IEC

JEDEC

JEITA

07-06-02

16-05-31

SOT765-1

MO-187

Fig. 8. Package outline SOT765-1 (VSSOP8)

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

8 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

13. Abbreviations

Table 11. Abbreviations

Acronym

Description

CMOS

DUT

ESD

HBM

MIL

Complementary Metal-Oxide Semiconductor

Device Under Test

ElectroStatic Discharge

Human Body Model

Military

Machine Model

TTL

Transistor-Transistor Logic

14. Revision history

Table 12. Revision history

Document ID

Release date

20181023

Data sheet status

Change notice Supersedes

74LVC3G07_Q100 v.3

Modifications:

Product data sheet

74LVC3G07_Q100 v.2

•

The format of this data sheet has been redesigned to comply with the identity guidelines

of Nexperia.

Legal texts have been adapted to the new company name where appropriate.

74LVC3G07_Q100 v.2

Modifications:

20161214

Table 7: The maximum limits for leakage current and supply current have changed.

20130129 Product data sheet

Product data sheet

74LVC3G07_Q100 v.1

•

74LVC3G07_Q100 v.1

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

9 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

equipment, nor in applications where failure or malfunction of an Nexperia

product can reasonably be expected to result in personal injury, death or

severe property or environmental damage. Nexperia and its suppliers accept

no liability for inclusion and/or use of Nexperia products in such equipment or

applications and therefore such inclusion and/or use is at the customer's own

risk.

15. Legal information

Data sheet status

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Document status Product

Definition

[1][2]

status [3]

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

Objective [short]

data sheet

Development

This document contains data from

the objective specification for

product development.

Preliminary [short]

data sheet

Qualification

Production

This document contains data from

the preliminary specification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Product [short]

data sheet

This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Disclaimers

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use in automotive applications — This Nexperia product

has been qualified for use in automotive applications. Unless otherwise

agreed in writing, the product is not designed, authorized or warranted to

be suitable for use in life support, life-critical or safety-critical systems or

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

10 / 11

Nexperia

74LVC3G07-Q100

Triple buffer with open-drain output

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Ordering information....................................................2

4. Marking..........................................................................2

5. Functional diagram.......................................................2

6. Pinning information......................................................2

6.1. Pinning.........................................................................2

6.2. Pin description.............................................................3

7. Functional description................................................. 3

8. Limiting values............................................................. 3

9. Recommended operating conditions..........................4

10. Static characteristics..................................................4

11. Dynamic characteristics.............................................5

11.1. Waveforms and test circuit........................................ 6

12. Package outline.......................................................... 7

13. Abbreviations..............................................................9

14. Revision history..........................................................9

15. Legal information......................................................10

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 23 October 2018

74LVC3G07_Q100

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 23 October 2018

11 / 11

74LVC3G07DC-Q100 [NEXPERIA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E