BAT54J [NEXPERIA]

Schottky barrier single diodeProduction;


型号：	BAT54J
厂家：	Nexperia
描述：	Schottky barrier single diodeProduction 二极管
文件：	总8页 (文件大小：199K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

BAT54J

Schottky barrier single diode

1 October 2022

Product data sheet

1. General description

Planar Schottky barrier single diode with an integrated guard ring for stress protection,

encapsulated in a very small and flat lead SOD323F (SC-90) Surface-Mounted Device (SMD)

plastic package.

2. Features and benefits

•

Low forward voltage

•

Very small and flat lead SMD plastic package

Low capacitance

Flat leads: excellent coplanarity and improved thermal behavior

3. Applications

•

Voltage clamping

Line termination

Reverse polarity protection

4. Quick reference data

Table 1. Quick reference data

Symbol

Parameter

Conditions

Min

Typ

Max

200

Unit

I_F

forward current

reverse voltage

forward voltage

V_R

V_F

I_F= 1 mA; t_p≤ 300 µs; δ ≤ 0.02;

pulsed; T_amb= 25 °C

320

5. Pinning information

Table 2. Pinning information

Symbol

Description

cathode[1]

anode

Simplified outline

Graphic symbol

aaa-003679

SC-90 (SOD323F)

[1] The marking bar indicates the cathode.

Nexperia

BAT54J

Schottky barrier single diode

6. Ordering information

Table 3. Ordering information

Type number

Package

Name

Description

Version

BAT54J

SC-90

plastic, surface-mounted package; 2 leads; 1.7 mm x 1.25 SOD323F

mm x 0.7 mm body

7. Marking

Table 4. Marking codes

Type number

Marking code

BAT54J

8. Limiting values

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol

V_R

Parameter

Conditions

Min

Max

Unit

reverse voltage

forward current

I_F

200

300

I_FRM

repetitive peak forward

current

t_p≤ 1 s; δ ≤ 0.5

I_FSM

non-repetitive peak

forward current

t_p< 10 ms; square wave; T_j(init)= 25 °C

T_amb≤ 25 °C

600

P_tot

T_j

total power dissipation

junction temperature

ambient temperature

storage temperature

[1]

550

150

°C

T_amb

T_stg

-65

°C

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated, mounting pad for cathode 1 cm².

9. Thermal characteristics

Table 6. Thermal characteristics

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

R_th(j-a)

thermal resistance from in free air

junction to ambient

[1] [2]

[3]

230

K/W

R_th(j-sp)

thermal resistance from

junction to solder point

K/W

[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm².

[2] Reflow soldering is the only recommended soldering method.

[3] Soldering point of cathode tab.

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

2 / 8

Nexperia

BAT54J

Schottky barrier single diode

10. Characteristics

Table 7. Characteristics

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

V_F

forward voltage

I_F= 0.1 mA; t_p≤ 300 µs; δ ≤ 0.02;

pulsed; T_amb= 25 °C

240

I_F= 1 mA; t_p≤ 300 µs; δ ≤ 0.02;

pulsed; T_amb= 25 °C

320

400

500

800

I_F= 10 mA; t_p≤ 300 µs; δ ≤ 0.02;

pulsed; T_amb= 25 °C

I_F= 30 mA; t_p≤ 300 µs; δ ≤ 0.02;

pulsed; T_amb= 25 °C

I_F= 100 mA; t_p≤ 300 µs; δ ≤ 0.02;

pulsed; T_amb= 25 °C

I_R

reverse current

V_R= 25 V; T_amb= 25 °C

µA

C_d

diode capacitance

V_R= 1 V; f = 1 MHz; T_amb= 25 °C

msa892

msa893

(1)

(2)

(1) (2) (3)

(µA)

(mA)

(1)

(2) (3)

(3)

- 1

0.4

0.8

1.2

(V)

(1) T_amb= 125 °C

(2) T_amb= 85 °C

(3) T_amb= 25 °C

(1) T_amb= 125 °C

(2) T_amb= 85 °C

(3) T_amb= 25 °C

Fig. 1. Forward current as a function of forward

voltage; typical values

Fig. 2. Reverse current as a function of reverse

voltage; typical values

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

3 / 8

Nexperia

BAT54J

Schottky barrier single diode

msa891

(pF)

(V)

f = 1 MHz; T_amb= 25 °C

Fig. 3. Diode capacitance as a function of reverse voltage; typical values

11. Package outline

1.35

1.15

0.80

0.65

0.5

0.3

2.7 1.8

2.3 1.6

0.40

0.25

0.10

Dimensions in mm

04-09-13

Fig. 4. Package outline SC-90 (SOD323F)

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

4 / 8

Nexperia

BAT54J

Schottky barrier single diode

12. Soldering

3.05

2.2

2.1

solder lands

solder resist

1.65 0.95

0.5 (2×) 0.6 (2×)

solder paste

occupied area

0.5

(2×)

Dimensions in mm

0.6

(2×)

sod323f_fr

Fig. 5. Reflow soldering footprint for SC-90 (SOD323F)

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

5 / 8

Nexperia

BAT54J

Schottky barrier single diode

13. Revision history

Table 8. Revision history

Data sheet ID

BAT54J v.2

Release date

20221001

Data sheet status

Change notice

Supersedes

Product data sheet

BAT54J v.1

Modifications:

•

Product changed to non automotive. Please refer to the automotive product(s) with -Q.

Packing information removed.

BAT54J v.1

20070308

Product data sheet

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

6 / 8

Nexperia

BAT54J

Schottky barrier single diode

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

14. Legal information

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Data sheet status

Document status Product

Definition

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification.

[1][2]

status [3]

Objective [short]

data sheet

Development

This document contains data from

the objective specification for

product development.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the Nexperia product is suitable

and fit for the customer’s applications and products planned, as well as

for the planned application and use of customer’s third party customer(s).

Customers should provide appropriate design and operating safeguards to

minimize the risks associated with their applications and products.

Preliminary [short]

data sheet

Qualification

Production

This document contains data from

the preliminary specification.

Product [short]

data sheet

This document contains the product

specification.

[1] Please consult the most recently issued document before initiating or

completing a design.

Nexperia does not accept any liability related to any default, damage, costs

or problem which is based on any weakness or default in the customer’s

applications or products, or the application or use by customer’s third party

customer(s). Customer is responsible for doing all necessary testing for the

customer’s applications and products using Nexperia products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Nexperia does not accept any

liability in this respect.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the internet at https://www.nexperia.com.

Definitions

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the relevant

full data sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications.

In no event shall Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards,

customer (a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s own risk,

and (c) customer fully indemnifies Nexperia for any liability, damages or failed

product claims resulting from customer design and use of the product for

automotive applications beyond Nexperia’s standard warranty and Nexperia’s

product specifications.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Nexperia.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Trademarks

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

7 / 8

Nexperia

BAT54J

Schottky barrier single diode

Contents

1. General description......................................................1

2. Features and benefits.................................................. 1

3. Applications.................................................................. 1

4. Quick reference data....................................................1

5. Pinning information......................................................1

6. Ordering information....................................................2

7. Marking..........................................................................2

8. Limiting values............................................................. 2

9. Thermal characteristics............................................... 2

10. Characteristics............................................................3

11. Package outline.......................................................... 4

12. Soldering..................................................................... 5

13. Revision history..........................................................6

14. Legal information........................................................7

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 1 October 2022

BAT54J

All information provided in this document is subject to legal disclaimers.

Product data sheet

1 October 2022

8 / 8

BAT54J [NEXPERIA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E