BZX884D-C12 [NEXPERIA]
Voltage regulator diodeProduction;型号: | BZX884D-C12 |
厂家: | Nexperia |
描述: | Voltage regulator diodeProduction 二极管 |
文件: | 总10页 (文件大小:163K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BZX884D-C12
Voltage regulator diode
Rev. 1 — 12 October 2017
Preliminary data sheet
1 Product profile
1.1 General description
General-purpose Zener diode, encapsulated in an SOD882D leadless ultra small
Surface-Mounted Device (SMD) plastic package with visible and solderable side pads.
1.2 Features and benefits
• Power dissipation comparable to SOT23
• Package height typ. 0.37 mm
• AEC-Q101 qualified
1.3 Applications
• General regulation functions
• Mobile applications
• ElectroStatic Discharge (ESD) ultra high-speed switching
• High-frequency applications
• Mobile communication, digital cameras, PDAs and PCMCIA cards
2 Pinning information
Table 1.ꢀPinning
Pin Symbol
Description
cathode[1]
anode
Simplified outline
Graphic symbol
1
2
K
A
2
1
1
2
006aab040
Transparent
top view
[1] The marking bar indicates the cathode.
Nexperia
BZX884D-C12
Voltage regulator diode
3 Ordering information
Table 2.ꢀOrdering information
Type number
Package
Name
Description
Version
BZX884D-C12
-
leadless ultra small plastic package; 2
terminals; body 1.0 x 0.6 x 0.4 mm
SOD882D
4 Marking
Table 3.ꢀMarking Codes
Type number
Marking Code
BZX884D-C12
0110
0011
CATHODE BAR
READING DIRECTION
VENDOR CODE
READING EXAMPLE:
0111
1011
MARKING CODE
(EXAMPLE)
READING DIRECTION
006aac477
Tj = 25 °C
Figure 1.ꢀSOD882D binary marking code description
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
2 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
5 Limiting values
Table 4.ꢀLimiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
IF
Parameter
Conditions
Min
Max
Unit
forward current
-
-
200
mA
IZSM
non-repetitive peak reverse current tp = 100 µs; square wave;
Tamb = 25 °C; prior to surge
[1]
Ptot
total power dissipation
Tamb = 25 °C
-
250
mW
Tj
junction temperature
ambient temperature
storage temperature
-
150
°C
°C
°C
Tamb
Tstg
−55
−65
+150
+150
[1] Refer to SOD882 standard mounting conditions (footprint), FR4 with 60 µ copper strip line.
6 Thermal characteristics
Table 5.ꢀThermal characteristics
Symbol Parameter
Conditions
Min
Typ
Max
Unit
Rth(j-a)
thermal resistance from junction in free air
to ambient
-
-
500
K/W
7 Characteristics
Table 6.ꢀCharacteristics
Tj = 25 °C unless otherwise specified.
Symbol Parameter
Conditions
IF = 10 mA
VR = 8 V
Min
Typ
Max
0.9
Unit
V
VF
IR
forward voltage
reverse current
-
-
-
-
100
nA
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
3 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
BZX884 Working
Differential resistance
rdiff (Ω);
Temperature
coefficient
Diode capacit.
Cd (pF)[1]
Non-repetitive
peak reverse
-C
voltage
VZ (V);
SZ (mV/K);
current
at IZ = 5 mA
IZSM (A) at tp =
100 µs; Tamb
25°C
=
Tol. ± 5%
at IZtest = 1 at IZtest = 5
mA
Min Max Typ Max Typ Max Typ
11.40 12.60 25 150 10 7.9
mA
Max
Max
12
2
105
2.5
[1] f = 1 MHz; VR = 0 V
mbg781
aaa-027579
300
12
I
S
Z
F
(mV/K)
(mA)
12
200
8
100
4
0
0
0.6
-1
10
2
0.8
1
1
10
10
V
(V)
I (mA)
Z
F
Tj = 25 °C to 150 °C
Figure 2.ꢀForward current as a function of forward
voltage; typical values
Figure 3.ꢀTemperature coefficient as a function of
working current; typical values
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
4 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
8 Package outline
DFN1006D-2: Leadless ultra small plastic package; 2 terminals; body 1 x 0.6 x 0.4 mm
SOD882D
(2x)
w
L
(2x)
1
A
1
2
b
(2x)
(2x)
w
B
e
A
A
1
y
E
A
D
B
(2)
0
0.5
1 mm
Dimensions
Unit
scale
(1)
A
A
b
D
E
e
L
w
y
1
1
max 0.4 0.04 0.55 0.65 1.05
0.30 0.1 0.03
0.50 0.60 1.00 0.65 0.25
0.45 0.55 0.95 0.22
mm nom
min
Note
1. Dimension including plating thickness.
2. The marking bar indicates the cathode (if applicable).
sod882d_po
Issue date
References
Outline
version
European
projection
IEC
JEDEC
JEITA
10-09-27
12-05-01
SOD882D
Figure 4.ꢀPackage outline SOD882D
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
5 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
9 Soldering
1.4
0.2
solder lands
solder resist
solder paste
0.8
(2×)
0.6 0.7
(2×) (2×)
Dimensions in mm
0.3
0.4
1
1.3
sod882d_fr
Reflow soldering is the only recommended soldering method.
Dimensions in mm.
Figure 5.ꢀReflow soldering footprint SOD882D
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
6 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
10 Revision history
Table 7.ꢀRevision history
Document ID
Release date
Data sheet status
Change
Supersedes
notice
BZX884D-C12 v.1
20171012
Preliminary data sheet
-
-
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
7 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
11 Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product
development.
Preliminary [short] data sheet
Product [short] data sheet
Qualification
Production
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
11.2 Definitions
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
Draft — The document is a draft version only. The content is still under
such equipment or applications and therefore such inclusion and/or use is at
internal review and subject to formal approval, which may result in
the customer’s own risk.
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
Short data sheet — A short data sheet is an extract from a full data sheet
without further testing or modification. Customers are responsible for the
with the same product type number(s) and title. A short data sheet is
design and operation of their applications and products using Nexperia
intended for quick reference only and should not be relied upon to contain
products, and Nexperia accepts no liability for any assistance with
detailed and full information. For detailed and full information see the
applications or customer product design. It is customer’s sole responsibility
relevant full data sheet, which is available on request via the local Nexperia
to determine whether the Nexperia product is suitable and fit for the
sales office. In case of any inconsistency or conflict with the short data sheet,
customer’s applications and products planned, as well as for the planned
the full data sheet shall prevail.
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products. Nexperia does not accept
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
any liability related to any default, damage, costs or problem which is based
Nexperia and its customer, unless Nexperia and customer have explicitly
on any weakness or default in the customer’s applications or products, or
agreed otherwise in writing. In no event however, shall an agreement be
the application or use by customer’s third party customer(s). Customer is
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
responsible for doing all necessary testing for the customer’s applications
and products using Nexperia products in order to avoid a default of the
applications and the products or of the application or use by customer’s third
party customer(s). Nexperia does not accept any liability in this respect.
11.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
Limited warranty and liability — Information in this document is believed
damage to the device. Limiting values are stress ratings only and (proper)
to be accurate and reliable. However, Nexperia does not give any
operation of the device at these or any other conditions above those
representations or warranties, expressed or implied, as to the accuracy
given in the Recommended operating conditions section (if present) or the
or completeness of such information and shall have no liability for the
Characteristics sections of this document is not warranted. Constant or
consequences of use of such information. Nexperia takes no responsibility
repeated exposure to limiting values will permanently and irreversibly affect
for the content in this document if provided by an information source outside
the quality and reliability of the device.
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
or replacement of any products or rework charges) whether or not such
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
damages are based on tort (including negligence), warranty, breach of
in a valid written individual agreement. In case an individual agreement is
contract or any other legal theory. Notwithstanding any damages that
concluded only the terms and conditions of the respective agreement shall
customer might incur for any reason whatsoever, Nexperia's aggregate and
apply. Nexperia hereby expressly objects to applying the customer’s general
cumulative liability towards customer for the products described herein shall
terms and conditions with regard to the purchase of Nexperia products by
customer.
be limited in accordance with the Terms and conditions of commercial sale of
Nexperia.
No offer to sell or license — Nothing in this document may be interpreted
Right to make changes — Nexperia reserves the right to make changes
or construed as an offer to sell products that is open for acceptance or
to information published in this document, including without limitation
the grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
8 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications. In the event that customer
uses the product for design-in and use in automotive applications to
automotive specifications and standards, customer (a) shall use the product
without Nexperia's warranty of the product for such automotive applications,
use and specifications, and (b) whenever customer uses the product for
automotive applications beyond Nexperia's specifications such use shall be
solely at customer’s own risk, and (c) customer fully indemnifies Nexperia
for any liability, damages or failed product claims resulting from customer
design and use of the product for automotive applications beyond Nexperia's
standard warranty and Nexperia's product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
11.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
BZX884D-C12
All information provided in this document is subject to legal disclaimers.
© Nexperia B.V. 2017. All rights reserved.
Preliminary data sheet
Rev. 1 — 12 October 2017
9 / 10
Nexperia
BZX884D-C12
Voltage regulator diode
Contents
1
Product profile .................................................... 1
1.1
1.2
1.3
2
3
4
5
6
7
8
General description ............................................1
Features and benefits ........................................1
Applications ........................................................1
Pinning information ............................................ 1
Ordering information .......................................... 2
Marking .................................................................2
Limiting values ....................................................3
Thermal characteristics ......................................3
Characteristics .................................................... 3
Package outline ...................................................5
Soldering ..............................................................6
Revision history .................................................. 7
Legal information ................................................8
9
10
11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© Nexperia B.V. 2017.
All rights reserved.
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 12 October 2017
Document identifier: BZX884D-C12
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明