PBRP113ZT [NEXPERIA]
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩProduction;型号: | PBRP113ZT |
厂家: | Nexperia |
描述: | 40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩProduction PC 开关 光电二极管 晶体管 |
文件: | 总12页 (文件大小:265K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
31 March 2021
Product data sheet
1. General description
PNP low VCEsat Performance-Based (PB) Resistor-Equipped Transistor (RET) in a small SOT23
(TO-236AB) Surface-Mounted Device (SMD) plastic package.
NPN complement: PBRN113ZT
2. Features and benefits
•
600 mA output current capability
•
•
•
•
•
•
•
Low collector-emitter saturation voltage VCEsat
High current gain hFE
Reduces component count
Built-in bias resistors
Reduces pick and place costs
Simplifies circuit design
± 10 % resistor ratio tolerance
3. Applications
•
•
•
Digital application in automotive and industrial segments
Switching loads
Medium current peripheral driver
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VCEO
collector-emitter
voltage
open base
-
-
-40
V
IO
output current
bias resistor 1
bias resistor ratio
[1]
[2]
[2]
-
-
-600
1.3
11
mA
kΩ
R1
0.7
9
1
R2/R1
10
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided, 35 μm copper, tin-plated and standard footprint.
[2] See section "Test information" for resistor calculation and test conditions
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol
Description
Simplified outline
Graphic symbol
3
I
input (base)
O
R1
2
GND
O
ground (emitter)
output (collector)
I
3
R2
GND
1
2
aaa-019606
SOT23
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PBRP113ZT
SOT23
plastic, surface-mounted package; 3 terminals; 1.9 mm
pitch; 2.9 mm x 1.3 mm x 1 mm body
SOT23
7. Marking
Table 4. Marking codes
Type number
Marking code[1]
%7M
PBRP113ZT
[1] % = placeholder for manufacturing site code
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
2 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VCBO
VCEO
VEBO
VI
Parameter
Conditions
Min
Max
-40
-40
-5
Unit
V
collector-base voltage
open emitter
-
-
-
-
-
-
-
collector-emitter voltage open base
V
emitter-base voltage
input voltage
open collector
positive
V
5
V
negative
-10
-600
-800
V
IO
output current
[1]
mA
mA
IORM
repetitive peak output
current
tp ≤ 1 ms; δ ≤ 0.33
Tamb ≤ 25 °C
Ptot
total power dissipation
[1]
[2]
-
250
370
150
150
150
mW
mW
°C
-
Tj
junction temperature
ambient temperature
storage temperature
-
Tamb
Tstg
-55
-65
°C
°C
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided, 35 μm copper, tin-plated and standard footprint.
[2] Device mounted on an FR4 PCB, single-sided, 35 μm copper, tin-plated, mounting pad for collector 1 cm2.
aaa-033051
400
(1)
P
tot
(mW)
300
(2)
200
100
0
-75
-25
25
75
125
175
(°C)
T
amb
(1) FR4 PCB, single-sided, 35 µm copper, tin-plated, mounting pad for collector 1 cm2
(2) FR4 PCB, single-sided, 35 µm copper, tin-plated and standard footprint
Fig. 1. Power derating curve
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
3 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
9. Thermal characteristics
Table 6. Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
500
338
105
Unit
K/W
K/W
K/W
Rth(j-a)
thermal resistance from in free air
junction to ambient
[1]
[2]
-
-
-
-
-
-
Rth(j-sp)
thermal resistance from
junction to solder point
[1] Device mounted on an FR4 PCB, single-sided, 35 μm copper, tin-plated and standard footprint.
[2] Device mounted on an FR4 PCB, single-sided, 35 μm copper, tin-plated, mounting pad for collector 1 cm2.
006aab000
3
10
Z
δ = 1
0.50
th(j-a)
0.75
0.33
(K/W)
2
10
0.20
0.10
0.05
10
0.02
0.01
0
1
- 1
10
- 5
- 4
- 3
- 2
- 1
2
3
10
10
10
10
10
1
10
10
10
t
(s)
p
FR4 PCB, single-sided, 35 µm copper, tin-plated and standard footprint.
Fig. 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
006aab001
3
10
Z
th(j-a)
δ = 1
0.50
(K/W)
0.75
0.33
2
10
0.20
0.10
0.05
10
0.02
0.01
0
1
- 1
10
- 5
- 4
- 3
- 2
- 1
2
3
10
10
10
10
10
1
10
10
10
t
(s)
p
FR4 PCB, single-sided, 35 µm copper, tin-plated, mounting pad for collector 1 cm2.
Fig. 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
4 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
10. Characteristics
Table 7. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
V(BR)CBO
collector-base
IC = -100 µA; IE = 0 A; Tamb = 25 °C
-40
-
-
V
breakdown voltage
V(BR)CEO
ICBO
collector-emitter
breakdown voltage
IC = -10 mA; IB = 0 A; Tamb = 25 °C
VCB = -30 V; IE = 0 A; Tamb = 25 °C
-40
-
-
-
-
-
V
collector-base cut-off
current
-
-
-
-100
-0.5
-0.8
nA
µA
mA
ICEO
collector-emitter cut-off VCE = -30 V; IB = 0 A; Tamb = 25 °C
current
IEBO
emitter-base cut-off
current
VEB = -5 V; IC = 0 A; Tamb = 25 °C
hFE
DC current gain
VCE = -5 V; IC = -50 mA; Tamb = 25 °C
190
230
270
320
-
-
VCE = -5 V; IC = -300 mA; pulsed; tp ≤
300 µs; δ ≤ 0.02; Tamb = 25 °C
VCE = -5 V; IC = -600 mA; pulsed; tp ≤
300 µs; δ ≤ 0.02; Tamb = 25 °C
190
270
-
VCEsat
collector-emitter
saturation voltage
IC = -50 mA; IB = -2.5 mA; Tamb = 25 °C
-
-
-35
-70
-45
mV
mV
IC = -200 mA; IB = -10 mA; pulsed; tp ≤
300 µs; δ ≤ 0.02; Tamb = 25 °C
-100
IC = -500 mA; IB = -10 mA; pulsed; tp ≤
300 µs; δ ≤ 0.02; Tamb = 25 °C
-
-
-200
-450
-300
-750
mV
mV
IC = -600 mA; IB = -6 mA; pulsed; tp ≤
300 µs; δ ≤ 0.02; Tamb = 25 °C
VI(off)
VI(on)
R1
off-state input voltage VCE = -5 V; IC = -100 µA; Tamb = 25 °C
on-state input voltage VCE = -0.3 V; IC = -20 mA; Tamb = 25 °C
bias resistor 1
-0.3
-0.4
0.7
9
-0.5
-0.7
1
-1
V
-1.4
1.3
11
-
V
[1]
[1]
kΩ
R2/R1
Cc
bias resistor ratio
10
collector capacitance
VCB = -10 V; IE = 0 A; ie = 0 A;
f = 1 MHz; Tamb = 25 °C
-
11
pF
[1] See section "Test information" for resistor calculation and test conditions
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
5 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
006aab079
006aab080
3
- 1
10
- 10
(1)
(2)
(3)
h
FE
V
CEsat
(V)
2
10
(1)
(2)
10
(3)
- 2
1
- 10
- 1
- 10
2
3
2
3
- 1
- 10
- 10
- 10
- 1
- 10
- 10
- 10
I
(mA)
I (mA)
C
C
VCE = -5 V
IC/IB = 20
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
Fig. 4. DC current gain as a function of collector
current; typical values
Fig. 5. Collector-emitter saturation voltage as a
function of collector current; typical values
006aab081
006aab082
- 1
- 1
V
V
CEsat
(V)
CEsat
(V)
(1)
(2)
(3)
- 1
- 1
- 10
- 10
(1)
(2)
(3)
- 2
- 10
- 2
- 10
2
3
2
3
- 1
- 10
- 10
- 10
- 1
- 10
- 10
- 10
I
(mA)
I (mA)
C
C
IC/IB = 50
IC/IB = 100
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
Fig. 6. Collector-emitter saturation voltage as a
function of collector current; typical values
Fig. 7. Collector-emitter saturation voltage as a
function of collector current; typical values
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
6 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
006aab083
006aab084
- 10
- 10
V
I(on)
(V)
V
I(off)
(V)
- 1
- 1
(1)
(2)
(1)
(2)
(3)
(3)
- 1
- 10
- 1
- 10
- 1
- 10
2
3
- 1
- 10
2
- 1
- 10
- 10
- 10
- 1
- 10
- 10
I
(mA)
I (mA)
C
C
VCE = -0.3 V
VCE = -5 V
(1) Tamb = -40 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
(1) Tamb = -40 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig. 8. On-state input voltage as a function of collector Fig. 9. Off-state input voltage as a function of collector
current; typical values current; typical values
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
7 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
11. Test information
Resistor calculation
•
Calculation of bias resistor 1 (R1)
•
Calculation of bias resistor ratio (R2/R1)
n.c.
I
I
; I
I1 I2
R1
; I
I3 I4
R2
GND
aaa-020083
Fig. 10. Resistor test circuit
Resistor test conditions
Table 8. Resistor test conditions
Type number
R1 (kΩ)
R2 (kΩ)
Test conditions
II1
II2
II3
PBRP113ZT
1
10
-700 µA
-800 µA
750 µA
12. Package outline
3.0
2.8
1.1
0.9
3
0.45
0.15
2.5 1.4
2.1 1.2
1
2
0.48
0.38
0.15
0.09
1.9
Dimensions in mm
18-03-12
Fig. 11. Package outline SOT23
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
8 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
13. Soldering
3.3
2.9
1.9
solder lands
solder resist
2
3
1.7
solder paste
occupied area
0.6
0.7
(3×)
(3×)
Dimensions in mm
0.5
(3×)
0.6
(3×)
1
sot023_fr
Fig. 12. Reflow soldering footprint for SOT23
2.2
1.2
(2×)
1.4
(2×)
solder lands
solder resist
2.6
4.6
occupied area
Dimensions in mm
1.4
preferred transport direction during soldering
2.8
4.5
sot023_fw
Fig. 13. Wave soldering footprint for SOT23
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
9 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
14. Revision history
Table 9. Revision history
Data sheet ID
PBRP113ZT v.2
Modifications:
Release date
20210331
Data sheet status
Change notice
Supersedes
Product data sheet
-
PBRP113ZT v.1
•
•
Product description changed from BISS to PB RET
The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
•
Legal texts have been adapted to the new company name where appropriate.
PBRP113ZT v.1
20080116
Product data sheet
-
-
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
10 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
15. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
11 / 12
Nexperia
PBRP113ZT
40 V, 600 mA PNP PB RET; R1 = 1 kΩ, R2 = 10 kΩ
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Thermal characteristics............................................... 4
10. Characteristics............................................................5
11. Test information..........................................................8
12. Package outline.......................................................... 8
13. Soldering..................................................................... 9
14. Revision history........................................................10
15. Legal information......................................................11
© Nexperia B.V. 2021. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 31 March 2021
©
PBRP113ZT
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2021. All rights reserved
Product data sheet
31 March 2021
12 / 12
相关型号:
©2020 ICPDF网 联系我们和版权申明