PDZ33B [NEXPERIA]
Single Zener diodesProduction;
| 型号： | PDZ33B |
| 厂家： | 
Nexperia |
| 描述： | Single Zener diodesProduction 测试 光电二极管 |
| 文件： | 总11页 (文件大小：251K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PDZ-B series
Single Zener diodes
Rev. 5 — 21 December 2022
Product data sheet
1. General description
Low-power general purpose voltage regulator diodes in a very small SOD323 (SC-76) Surface-
Mounted Device (SMD) plastic package.
2. Features and benefits
•
Total power dissipation: Ptot ≤ 400 mW
•
•
•
•
Small plastic package suitable for surface mounted design
Wide variety of voltage ranges: nominal 2.4 V to 36 V (E24 range)
Tolerance approximately ± 2 %
PDZ5.1B - 10B: Very low dynamic impedances at low currents, very low leakage current, hard
breakdown knee
3. Applications
•
General voltage regulation
4. Quick reference data
Table 1. Quick reference data
Symbol Parameter
Conditions
IF = 10 mA
Tamb ≤ 25 °C
Min
Typ
Max
0.9
Unit
V
VF
forward voltage
[1]
[2]
-
-
-
-
Ptot
total power dissipation
400
mW
[1] Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
[2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.
Nexperia
PDZ-B series
Single Zener diodes
5. Pinning information
Table 2. Pinning
Pin
1
Symbol
Description
cathode[1]
anode
Simplified outline
Graphic symbol
K
A
1
2
A
K
2
006aaa152
[1] The marking bar indicates the cathode.
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
-
Description
plastic surface-mounted package; 2 leads
Version
PDZ2.4B to PDZ36B[1]
SOD323
[1] The series consists of 29 types with nominal working voltages from 2.4 V to 36 V.
7. Marking
Table 4. Marking Codes
Type number
PDZ2.4B
PDZ2.7B
PDZ3.0B
PDZ3.3B
PDZ3.6B
PDZ3.9B
PDZ4.3B
PDZ4.7B
PDZ5.1B
PDZ5.6B
Marking Code
Type number
PDZ6.2B
PDZ6.8B
PDZ7.5B
PDZ8.2B
PDZ9.1B
PDZ10B
PDZ11B
PDZ12B
PDZ13B
PDZ15B
Marking Code
Type number
PDZ16B
PDZ18B
PDZ20B
PDZ22B
PDZ24B
PDZ27B
PDZ30B
PDZ33B
PDZ36B
Marking Code
Z0
Z1
Z2
Z3
Z4
Z5
Z6
Z7
Z8
Z9
ZA
ZB
ZC
ZD
ZE
ZF
ZG
ZH
ZJ
ZL
ZM
ZN
ZP
ZQ
ZR
ZS
ZT
ZU
ZK
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
2 / 11
Nexperia
PDZ-B series
Single Zener diodes
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
IF
Parameter
Conditions
Min
Max
200
see
characteristics
table
Unit
continuous forward current
non-repetitive peak reverse current
-
-
mA
IZSM
tp = 100 µs; square wave;
Tamb = 25 °C prior to surge
Ptot
Tstg
Tj
total power dissipation
storage temperature
junction temperature
Tamb = 25 °C
[1] -
400
mW
°C
−65
-
+150
+150
°C
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
9. Thermal characteristics
Table 6. Thermal characteristics
Symbol
Rth(j-sp)
Rth(j-a)
Parameter
Conditions
Min
Typ
Max
130
340
Unit
K/W
K/W
thermal resistance from junction to solder point
thermal resistance from junction to ambient
in free air
-
-
-
[1] -
[1] Device mounted on an FR4 Printed-Circuit Board (PCB),single-sided copper, tin-plated and standard footprint.
10. Characteristics
Table 7. Characteristics
Tj = 25 °C unless otherwise specified.
Symbol
VF
Parameter
Conditions
IF = 10 mA
IF = 100 mA
Min
[1] -
[1] -
Typ
Max
0.9
Unit
V
forward voltage
forward voltage
-
-
VF
1.1
V
[1] Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
3 / 11
Nexperia
PDZ-B series
Single Zener diodes
Table 8. Characteristics per type; PDZ2.4B to PDZ36B
Tj = 25 °C unless otherwise specified.
Type
Working
voltage
Maximum differential
resistance
Reverse
current
Temperature
coefficient
Diode
Non-
capacitance repetitive
V
(V);
= 5 mA
r
(Ω)
I
(μA)
S
(mV/K);
C (pF)[1]
peak reverse
current
Z
dif
R
Z
d
I
I = 5 mA
Z
Z
I
(A)[2]
ZSM
Min
Max
2.63
2.91
3.07
3.53
3.85
4.16
4.48
4.75
5.20
5.73
6.33
6.93
7.60
8.36
9.23
I
= 0.5 mA I = 5 mA Max
V
R
(V) Typ
−1.6
−2.0
−2.1
−2.4
−2.4
−2.5
−2.5
−1.4
0.3
Max
450
440
425
410
390
370
350
325
300
275
250
215
170
150
120
110
108
105
103
99
Max
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
5.5
5.5
5.5
5.5
3.5
3.5
3.5
3.5
3.0
3.0
2.5
2.0
1.5
1.5
1.5
1.3
1.3
1.0
1.0
0.9
0.8
Z
Z
PDZ2.4B
PDZ2.7B
PDZ3.0B
PDZ3.3B
PDZ3.6B
PDZ3.9B
PDZ4.3B
PDZ4.7B
PDZ5.1B
PDZ5.6B
PDZ6.2B
PDZ6.8B
PDZ7.5B
PDZ8.2B
PDZ9.1B
PDZ10B
PDZ11B
PDZ12B
PDZ13B
PDZ15B
PDZ16B
PDZ18B
PDZ20B
PDZ22B
PDZ24B
PDZ27B
PDZ30B
PDZ33B
PDZ36B
2.43
2.69
2.85
3.32
3.60
3.89
4.17
4.55
4.96
5.48
6.06
6.65
7.28
8.02
8.85
9.77
1000
1000
1000
1000
100
100
95
50
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
20
10
95
5
500 @ 1 mA 90
500 @ 1 mA 90
600 @ 1 mA 90
600 @ 1 mA 90
5
3
3
2
250
100
80
60
50
50
40
10
10
10
10
10
10
10
15
20
20
20
25
30
40
40
40
60
2
1
1.9
0.5
0.5
0.5
0.5
0.5
0.1
0.1
0.1
0.1
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
2.7
60
3.4
60
4.0
60
4.6
60
5.5
10.21 60
6.4
10.78 11.22 60
11.74 12.24 80
12.91 13.49 80
14.34 14.98 80
15.85 16.51 80
17.56 18.35 80
19.52 20.39 100
21.54 22.47 100
23.72 24.78 120
26.19 27.53 150
29.19 30.69 200
32.15 33.79 250
35.07 36.87 300
7.4
8.4
10.0
11.0
12.0
13.0
15.0
17.0
19.0
21.0
23.0
25.0
27.0
9.4
11.4
12.4
14.4
16.4
18.4
20.4
23.4
26.6
29.7
33.0
97
93
88
84
80
73
66
60
59
[1] f = 1 MHz; VR = 0 V.
[2] tp = 100 μs; Tamb = 25 °C.
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
4 / 11
Nexperia
PDZ-B series
Single Zener diodes
mbk245
mbg781
300
500
P
tot
(mW)
400
I
F
(mA)
200
300
200
100
0
100
0
0.6
0.8
1
0
50
100
150
200
(°C)
V
(V)
T
F
amb
Tj = 25 °C
FR4 PCB, standard footprint
Fig. 2. Forward current as a function of forward
voltage; typical values
Fig. 1. Power derating curve
mgl273
mgl274
0
10
12
S
Z
S
Z
11
4.3
(mV/K)
(mV/K)
10
9.1
- 1
5
8.2
7.5
6.8
3.9
3.6
6.2
5.6
5.1
- 2
- 3
0
3.3
4.7
3.0
2.4
2.7
- 5
0
20
40
60
0
4
8
12
16
20
I
(mA)
Z
I
(mA)
Z
PDZ2.4B to PDZ4.3B
Tj = 25 °C to 150 °C
PDZ4.7B to PDZ12B
Tj = 25 °C to 150 °C
Fig. 3. Temperature coefficient as a function of
working current; typical values
Fig. 4. Temperature coefficient as a function of
working current; typical values
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
5 / 11
Nexperia
PDZ-B series
Single Zener diodes
006aab246
006aab247
2
2
10
10
V
(V) = 4.7
I
I
Z
Z(nom)
Z
(mA)
(mA)
V
(V) = 2.4
Z(nom)
3.6 4.3
3.9
3.0
3.3
10
10
5.6
6.8
9.1
11
2.7
6.2
8.2
7.5
10
12
5.1
1
1
- 1
- 1
10
10
- 2
- 2
10
10
10
- 3
- 3
10
0
1
2
3
4
5
0
2
4
6
8
10
12
V (V)
Z
14
V
(V)
Z
PDZ2.4B to PDZ4.3B
Tj = 25 °C
PDZ4.7B to PDZ12B
Tj = 25 °C
Fig. 5. Working current as a function of working
voltage; typical values
Fig. 6. Working current as a function of working
voltage; typical values
aaa-026621
2
10
I
V
(V) = 13
Z
Z(nom)
(mA)
10
18
22
27
33
15
16
20
24
30
36
1
-1
10
10
10
-2
-3
10
20
30
40
V
(V)
Z
PDZ13B to PDZ36B
Tj = 25 °C
Fig. 7. Working current as a function of working voltage; typical values
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
6 / 11
Nexperia
PDZ-B series
Single Zener diodes
11. Package outline
Plastic surface-mounted package; 2 leads
SOD323
A
D
E
X
M
v
A
H
D
Q
1
2
b
p
A
A
1
(1)
c
L
p
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
UNIT
mm
b
c
D
E
H
L
p
Q
v
A
p
D
max
1.1
0.8
0.40 0.25
0.25 0.10
1.8
1.6
1.35
1.15
2.7
2.3
0.45 0.25
0.15 0.15
0.05
0.2
Note
1. The marking bar indicates the cathode
REFERENCES
JEDEC JEITA
OUTLINE
VERSION
EUROPEAN
PROJECTION
ISSUE DATE
IEC
03-12-17
06-03-16
SOD323
SC-76
Fig. 8. Package outline SOD323
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
7 / 11
Nexperia
PDZ-B series
Single Zener diodes
12. Soldering
3.05
2.1
solder lands
solder resist
1.65 0.95
0.5 (2×) 0.6 (2×)
solder paste
occupied area
2.2
Dimensions in mm
0.5
(2×)
0.6
(2×)
sod323_fr
Fig. 9. Reflow soldering footprint SOD323
5
2.9
1.5 (2×)
solder lands
solder resist
occupied area
1.2
2.75
Dimensions in mm
(2×)
preferred transport
direction during soldering
sod323_fw
Fig. 10. Wave soldering footprint SOD323
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
8 / 11
Nexperia
PDZ-B series
Single Zener diodes
13. Revision history
Table 9. Revision history
Document ID
PDZ-B_SER v.5
Modifications:
Release date
20221221
Data sheet status
Change notice
Supersedes
Product data sheet
-
PDZ-B_SER v.4
•
Figure 1: Notes and title corrected
PDZ-B_SER v.4
PDZ-B_SER v.3
PDZ-B_SER v.2
PDZ-B_SER v.1
20220701
20190305
20040322
20020218
Product data sheet
Product data sheet
Product data sheet
Product data sheet
-
-
-
-
PDZ-B_SER v.3
PDZ-B_SER v.2
PDZ-B_SER v.1
-
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
9 / 11
Nexperia
PDZ-B series
Single Zener diodes
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
14. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
10 / 11
Nexperia
PDZ-B series
Single Zener diodes
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Thermal characteristics............................................... 3
10. Characteristics............................................................3
11. Package outline.......................................................... 7
12. Soldering..................................................................... 8
13. Revision history..........................................................9
14. Legal information......................................................10
© Nexperia B.V. 2022. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 21 December 2022
©
PDZ-B_SER
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
Rev. 5 — 21 December 2022
11 / 11
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明