PESD15VS1ULD [NEXPERIA]
Unidirectional ESD protection diodeProduction;型号: | PESD15VS1ULD |
厂家: | Nexperia |
描述: | Unidirectional ESD protection diodeProduction 局域网 光电二极管 |
文件: | 总12页 (文件大小:866K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PESD15VS1ULD
Unidirectional ESD protection diode
Rev. 1 — 11 May 2011
Product data sheet
1. Product profile
1.1 General description
Unidirectional ElectroStatic Discharge (ESD) protection diode designed to protect one
signal line from the damage caused by ESD and other transients. The device is housed in
a SOD882D leadless ultra small Surface-Mounted Device (SMD) plastic package with
visible and solderable side pads.
1.2 Features and benefits
ESD protection of one line
Ultra small SMD plastic package
Solderable side pads
ESD protection up to 30 kV
IEC 61000-4-2; level 4 (ESD)
IEC 61000-4-5 (surge); IPP = 5 A
Max. peak pulse power: PPP = 150 W
Ultra low leakage current: IRM < 1 nA
Package height typ. 0.37 mm
Low clamping voltage: VCL = 23 V
AEC-Q101 qualified
1.3 Applications
Computers and peripherals
Audio and video equipment
Communication systems
Portable electronics
1.4 Quick reference data
Table 1.
Quick reference data
Tamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions
Min
Typ
-
Max
15
Unit
V
VRWM
Cd
reverse standoff voltage
diode capacitance
-
-
f = 1 MHz; VR = 0 V
32
70
pF
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
2. Pinning information
Table 2.
Pinning
Pin
1
Description
cathode
Simplified outline
Graphic symbol
[1]
2
anode
2
1
1
2
006aaa152
Transparent
top view
[1] The marking bar indicates the cathode.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
-
Description
Version
SOD882D
PESD15VS1ULD
leadless ultra small plastic package; 2 terminals;
body 1 × 0.6 × 0.4 mm
4. Marking
Table 4.
Marking codes
Type number
PESD15VS1ULD
Marking code[1]
0110 0000
[1] For SOD882D binary marking code description, see Figure 1.
4.1 Binary marking code description
CATHODE BAR
READING DIRECTION
VENDOR CODE
READING EXAMPLE:
0111
1011
MARKING CODE
(EXAMPLE)
READING DIRECTION
006aac477
Fig 1. SOD882D binary marking code description
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
2 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
PPP
Parameter
Conditions
tp = 8/20 μs
tp = 8/20 μs
Min
Max
150
5
Unit
W
[1]
[1]
peak pulse power
peak pulse current
junction temperature
ambient temperature
storage temperature
-
IPP
-
A
Tj
-
150
+150
+150
°C
°C
°C
Tamb
Tstg
−55
−65
[1] Non-repetitive current pulse 8/20 μs exponential decay waveform according to IEC 61000-4-5.
Table 6.
ESD maximum ratings
Tamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions
Min
Max
Unit
[1][2]
[2]
VESD
electrostatic
discharge voltage
IEC 61000-4-2
(contact discharge)
-
30
kV
MIL-STD-883
-
10
kV
(human body model)
[1] Device stressed with ten non-repetitive ESD pulses.
[2] Measured from pin 1 to 2.
Table 7.
ESD standards compliance
Standard
Conditions
IEC 61000-4-2; level 4 (ESD)
> 15 kV (air); > 8 kV (contact)
> 4 kV
MIL-STD-883; class 3 (human body model)
001aaa631
I
PP
001aaa630
120
100 %
90 %
100 % I ; 8 μs
PP
I
PP
(%)
80
−t
e
50 % I ; 20 μs
PP
40
10 %
t
t = 0.7 ns to 1 ns
r
0
30 ns
60 ns
0
10
20
30
40
t (μs)
Fig 2. 8/20 μs pulse waveform according to
Fig 3. ESD pulse waveform according to
IEC 61000-4-2
IEC 61000-4-5
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
3 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
6. Characteristics
Table 8.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
-
-
15
V
IRM
VBR
Cd
reverse leakage current VRWM = 15 V
-
< 1
18
32
50
nA
V
breakdown voltage
diode capacitance
clamping voltage
IR = 5 mA
17.6
-
18.4
70
f = 1 MHz; VR = 0 V
pF
[1][2]
[3]
VCL
IPP = 1 A
IPP = 5 A
IR = 10 A
-
-
-
-
23
40
-
V
V
Ω
-
rdyn
dynamic resistance
0.6
[1] Non-repetitive current pulse 8/20 μs exponential decay waveform according to IEC 61000-4-5.
[2] Measured from pin 1 to 2.
[3] Non-repetitive current pulse, Transmission Line Pulse (TLP) tp = 100 ns; square pulse;
ANS/IESD STM5-1-2008.
001aaa726
001aaa193
4
3
2
10
1.2
P
PP
P
PP
(W)
P
PP(25°C)
10
0.8
10
0.4
10
0
2
3
1
10
10
10
0
50
100
150
200
t
(μs)
T (°C)
j
p
Tamb = 25 °C
Fig 4. Peak pulse power as a function of exponential
pulse duration; typical values
Fig 5. Relative variation of peak pulse power as a
function of junction temperature; typical
values
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
4 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
I
006aac527
50
C
d
(pF)
40
30
20
10
0
−V
CL
−V
BR
−V
V
RWM
−I
−I
RM
R
−
+
P-N
−I
PP
0
5
10
15
20
V
(V)
R
006aaa407
f = 1 MHz; Tamb = 25 °C
Fig 6. Diode capacitance as a function of reverse
voltage; typical values
Fig 7. V-I characteristics for a unidirectional
ESD protection diode
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
5 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
ESD TESTER
4 GHz DIGITAL
OSCILLOSCOPE
RG 223/U
50 Ω coax
R
Z
450 Ω
10´
ATTENUATOR
C
50 Ω
Z
DUT
(DEVICE
UNDER
TEST)
IEC 61000-4-2 network
= 150 pF; R = 330 Ω
C
Z
Z
vertical scale = 2 kV/div
horizontal scale = 15 ns/div
vertical scale = 20 V/div
horizontal scale = 10 ns/div
GND
GND
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
clamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
vertical scale = 2 kV/div
horizontal scale = 15 ns/div
GND
GND
vertical scale = 20 V/div
horizontal scale = 10 ns/div
unclamped –8 kV ESD pulse waveform
(IEC 61000-4-2 network)
clamped –8 kV ESD pulse waveform
(IEC 61000-4-2 network)
006aac528
Fig 8. ESD clamping test setup and waveforms
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
6 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
7. Application information
The PESD15VS1ULD is designed for the protection of one unidirectional data or signal
line from the damage caused by ESD and surge pulses. The device may be used on lines
where the signal polarities are either positive or negative with respect to ground. The
PESD15VS1ULD provides a surge capability of 150 W per line for an 8/20 μs waveform.
line to be protected
(positive signal polarity)
line to be protected
(negative signal polarity)
PESD15VS1ULD
PESD15VS1ULD
GND
GND
unidirectional protection of one line
006aac529
Fig 9. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)
and surge transients. The following guidelines are recommended:
1. Place the PESD15VS1ULD as close to the input terminal or connector as possible.
2. The path length between the PESD15VS1ULD and the protected line should be
minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground
vias.
8. Test information
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
7 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
9. Package outline
0.65
0.55
0.4
max
2
0.30
0.22
1.05
0.95
0.65
1
0.30
0.22
0.55
0.45
cathode marking on top side
Dimensions in mm
10-08-06
Fig 10. Package outline SOD882D
10. Packing information
Table 9.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
Package
Description
Packing quantity
10000
PESD15VS1ULD
SOD882D 2 mm pitch, 8 mm tape and reel
-315
[1] For further information and the availability of packing methods, see Section 14.
11. Soldering
1.4
0.2
solder lands
solder resist
solder paste
0.8
(2×)
0.6 0.7
(2×) (2×)
Dimensions in mm
0.3
0.4
1
1.3
sod882d_fr
Reflow soldering is the only recommended soldering method.
Fig 11. Reflow soldering footprint SOD882D
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
8 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
12. Revision history
Table 10. Revision history
Document ID
Release date
20110511
Data sheet status
Change notice
Supersedes
PESD15VS1ULD v.1
Product data sheet
-
-
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
9 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
malfunction of a Nexperia product can reasonably be expected
13.2 Definitions
to result in personal injury, death or severe property or environmental
damage. Nexperia accepts no liability for inclusion and/or use of
Nexperia products in such equipment or applications and
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
13.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
10 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
PESD15VS1ULD
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 1 — 11 May 2011
11 of 12
PESD15VS1ULD
Nexperia
Unidirectional ESD protection diode
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Binary marking code description. . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Application information. . . . . . . . . . . . . . . . . . . 7
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 7
Quality information . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Packing information . . . . . . . . . . . . . . . . . . . . . 8
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9
3
4
4.1
5
6
7
8
8.1
9
10
11
12
13
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
13.1
13.2
13.3
13.4
14
15
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 11 May 2011
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明