PESD5V0S1USF [NEXPERIA]

Unidirectional ESD protection diodeProduction;


型号：	PESD5V0S1USF
厂家：	Nexperia
描述：	Unidirectional ESD protection diodeProduction
文件：	总13页 (文件大小：818K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PESD5V0S1USF

Unidirectional ESD protection diode

Rev. 1 — 16 July 2012

Product data sheet

1. Product profile

1.1 General description

Unidirectional ElectroStatic Discharge (ESD) protection diode designed to protect one

signal line from the damage caused by ESD and other transients. The device is

encapsulated in a leadless super small DSN0603-2 (SOD962) Surface-Mounted

Device (SMD) package.

1.2 Features and benefits

 ESD protection of one line

 ESD protection up to 30 kV

 Super small SMD package

 Ultra low leakage current I_RM< 1 nA

 IEC 61000-4-2; level 4 (ESD)

 IEC 61643-321 (surge); I_PPM= 3.5 A

1.3 Applications

 Computers and peripherals

 Audio and video equipment

 Cellular handsets and accessories

 Communication systems

 Portable electronics

1.4 Quick reference data

Table 1.

Quick reference data

T_amb= 25 C unless otherwise specified.

Symbol Parameter Conditions

Min

Typ

Max

Unit

V_RWM

C_d

reverse standoff voltage

diode capacitance

f = 1 MHz; V_R= 0 V

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

2. Pinning information

Table 2.

Pinning

Description

cathode

Simplified outline

Graphic symbol

[1]

anode

006aaa152

Transparent

top view

[1] The marking bar indicates the cathode.

3. Ordering information

Table 3.

Ordering information

Type number

Package

Name

Description

Version

PESD5V0S1USF DSN0603-2 leadless ultra small package; 2 terminals;

SOD962

body 0.6  0.3  0.3 mm

4. Marking

Table 4.

Marking codes

Type number

Marking code

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

2 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

5. Limiting values

Table 5.

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol

P_PPM

I_PPM

T_j

Parameter

Conditions

t_p= 8/20 s

Min

Max

Unit

[1]

rated peak pulse power

rated peak pulse current

junction temperature

ambient temperature

storage temperature

3.5

150

+150

C

T_amb

T_stg

55

65

[1] Device stressed with 8/20 s exponential decay waveform according to IEC 61000-4-5 and IEC 61643-321.

[2] Measured from pin 1 to pin 2.

Table 6.

ESD maximum ratings

T_amb= 25 C unless otherwise specified.

Symbol Parameter Conditions

Min

Max Unit

[1][2]

[2]

V_ESD

electrostatic

discharge voltage

IEC 61000-4-2 (contact discharge)

IEC 61000-4-2 (air discharge)

machine model

400

MIL-STD-883 (human body model)

[1] Device stressed with ten non-repetitive ESD pulses.

[2] Measured from pin 1 to pin 2.

Table 7.

ESD standards compliance

Standard

Conditions

IEC 61000-4-2; level 4 (ESD)

> 15 kV (air); > 8 kV (contact)

> 8 kV

MIL-STD-883; class 3B (human body model)

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

3 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

001aaa631

001aaa630

120

100 %

90 %

100 % I ; 8 μs

(%)

−t

50 % I ; 20 μs

10 %

t = 0.7 ns to 1 ns

30 ns

60 ns

t (μs)

Fig 1. 8/20 s pulse waveform according to

Fig 2. ESD pulse waveform according to

IEC 61000-4-2

IEC 61000-4-5 and IEC 61643-321

6. Characteristics

Table 8.

Characteristics

T_amb= 25 C unless otherwise specified.

Symbol Parameter Conditions

Min

Typ

Max

Unit

V_RWM

reverse standoff

voltage

I_RM

V_BR

C_d

reverse leakage current V_RWM= 5 V

100

breakdown voltage

diode capacitance

clamping voltage

I_R= 1 mA

f = 1 MHz; V_R= 0 V

I_PP= 1 A

[1][2]

[3]

V_CL

I_PPM= 3.5 A

I_R= 10 A

r_dyn

dynamic resistance

0.7



[1] Device stressed with 8/20 s exponential decay waveform according to IEC 61000-4-5 and IEC 61643-321.

[2] Measured from pin 1 to pin 2.

[3] Non-repetitive current pulse, Transmission Line Pulse (TLP) t_p= 100 ns; square pulse;

ANS/IESD STM5-1-2008.

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

4 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

006aab321

ꢀꢀꢀꢁꢂꢂꢃꢃꢂꢄ

1.2

ꢄꢀ

ꢃꢀ

ꢂꢀ

ꢁꢀ

ꢀ

ꢋ

ꢌ

ꢉꢍꢎꢊ

PPM

PPM(25°C)

0.8

0.4

100

150

200

ꢀ

ꢁ

ꢂ

ꢃ

ꢄ

ꢅ

ꢆ

ꢈꢉꢆꢊ

T (°C)

ꢇ

f = 1 MHz; T_amb= 25 C

Fig 3. Relative variation of rated peak pulse power as

a function of junction temperature; typical

values

Fig 4. Diode capacitance as a function of reverse

voltage; typical values

−V

RWM

−I

−

P-N

−I

PPM

006aab324

Fig 5. V-I characteristics for a unidirectional ESD protection diode

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

5 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

ꢔꢗꢑꢈꢓꢔꢗꢓꢔꢇ

ꢄꢈꢘ*+ꢈꢑꢕꢘꢕꢓ,-

.ꢗꢋꢕ--.ꢗꢋ./ꢔ

ꢇꢘꢈꢂꢂꢃꢙꢒ

ꢅꢀꢈꢏꢈꢚꢛꢜꢝ

ꢇ

ꢌ

ꢄꢅꢀꢈꢏ

ꢁꢀꢝ

,ꢓꢓꢔꢖꢒ,ꢓ.ꢇ

ꢋ

ꢐ

ꢅꢀꢈꢏ

ꢑꢒꢓ

ꢉꢑꢔꢆꢕꢋꢔ

ꢒꢖꢑꢔꢇ

ꢓꢔꢗꢓꢊ

ꢕꢔꢋꢈ ꢁꢀꢀꢀ!ꢄ!ꢂꢈ"#$%ꢛ&'

ꢋ ꢈ(ꢈꢁꢅꢀꢈꢍꢎ)ꢈꢇ ꢈ(ꢈꢃꢃꢀꢈꢏ

ꢐ

ꢌ

ꢁꢀ

ꢂ

ꢀ

ꢆ

ꢉ'ꢆꢊ

ꢆ

ꢉ'ꢆꢊ

!ꢂ

!ꢄ

ꢄ

ꢂ

ꢀ

!ꢂ

!ꢁꢀ

ꢀ

ꢁꢀ

ꢂꢀ

ꢃꢀ

ꢄꢀ

ꢅꢀ

$ꢈꢉ"ꢐꢊ

ꢀ

7ꢀ

ꢀ

ꢁꢀ

ꢂꢀ

ꢃꢀ

ꢄꢀ

ꢅꢀ

$ꢈꢉ"ꢐꢊ

ꢀ

7ꢀ

0"ꢚ1ꢜ2ꢍ#ꢌꢈ34ꢈ'ꢆꢈꢔꢗꢑꢈꢍ01ꢐ#ꢈ%ꢜ5#6ꢛ&2

ꢉꢕꢔꢋꢈ ꢁꢀꢀꢀ!ꢄ!ꢂꢈ"#$%ꢛ&'ꢊ

0"ꢚ1ꢜ2ꢍ#ꢌꢈ!4ꢈ'ꢆꢈꢔꢗꢑꢈꢍ01ꢐ#ꢈ%ꢜ5#6ꢛ&2

ꢉꢕꢔꢋꢈ ꢁꢀꢀꢀ!ꢄ!ꢂꢈ"#$%ꢛ&'ꢊ

ꢀꢀꢀꢁꢂꢂꢄꢅꢆꢇ

ꢀꢀꢀꢁꢂꢂꢃꢃꢂꢆ

Fig 6. ESD clamping test setup

ꢀꢀꢀꢁꢂꢂꢃꢃꢂꢃ

ꢅꢀ

ꢁꢀ

ꢀ

ꢆ

ꢋ-

ꢉꢆꢊ

ꢋ-

ꢉꢆꢊ

ꢄꢀ

ꢃꢀ

ꢂꢀ

ꢁꢀ

ꢀ

!ꢁꢀ

!ꢂꢀ

!ꢃꢀ

!ꢄꢀ

!ꢅꢀ

!ꢁꢀ

ꢀ

ꢁꢀ

ꢂꢀ

ꢃꢀ

ꢄꢀ

ꢅꢀ

ꢀ

$ꢈꢉ"ꢐꢊ

7ꢀ

!ꢁꢀ

ꢀ

ꢁꢀ

ꢂꢀ

ꢃꢀ

ꢄꢀ

ꢅꢀ

ꢀ

$ꢈꢉ"ꢐꢊ

7ꢀ

Fig 7. Clamped +8 kV pulse waveform

(IEC 61000-4-2 network)

Fig 8. Clamped 8 kV pulse waveform

(IEC 61000-4-2 network)

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

6 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

7. Application information

The device is designed for the protection of one unidirectional data or signal line from

surge pulses and ESD damage. The device is suitable on lines where the signal polarities

are either positive or negative with respect to ground.

18"#ꢈ$ꢛꢈ9#ꢈꢍ&ꢛ$#ꢚ$#ꢌ

ꢉꢍꢛꢐ8$85#ꢈꢐ8:"ꢜ1ꢈꢍꢛ1ꢜ&8$;ꢊ

18"#ꢈ$ꢛꢈ9#ꢈꢍ&ꢛ$#ꢚ$#ꢌ

ꢉ"#:ꢜ$85#ꢈꢐ8:"ꢜ1ꢈꢍꢛ1ꢜ&8$;ꢊ

ꢔꢗꢑꢈꢍ&ꢛ$#ꢚ$8ꢛ"ꢈꢌ8ꢛꢌ#

ꢘꢖꢑ

0"8ꢌ8&#ꢚ$8ꢛ"ꢜ1ꢈꢍ&ꢛ$#ꢚ$8ꢛ"ꢈꢛ6ꢈꢛ"#ꢈ18"#

ꢀꢀꢀꢁꢂꢂꢃꢄꢅꢃ

Fig 9. Application diagram

Circuit board layout and protection device placement

Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)

and surge transients. The following guidelines are recommended:

1. Place the device as close to the input terminal or connector as possible.

2. Minimize the path length between the device and the protected line.

3. Keep parallel signal paths to a minimum.

4. Avoid running protected conductors in parallel with unprotected conductors.

5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and

ground loops.

6. Minimize the length of the transient return path to ground.

7. Avoid using shared transient return paths to a common ground point.

8. Use ground planes whenever possible. For multilayer PCBs, use ground vias.

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

7 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

8. Package outline

ꢀ<ꢃꢂꢅ

ꢀ<ꢂ7ꢅ

ꢀ<ꢃꢂ

ꢀ<ꢂ4

ꢁ

ꢀ<ꢁꢅ

ꢀ<ꢁꢃ

ꢀ< ꢂꢅ

ꢀ<ꢅ7ꢅ

ꢀ<ꢄ

ꢂ

ꢀ<ꢂꢅ

ꢀ<ꢂꢃ

ꢀ<ꢀꢀ7

ꢑ82#"ꢐ8ꢛ"ꢐꢈ8"ꢈ22

ꢁꢂ!ꢀꢃ!ꢂ

Fig 10. Package outline DSN0603-2 (SOD962)

9. Packing information

Table 9.

Packing methods

The indicated -xxx are the last three digits of the 12NC ordering code.^[1]

Type number

Package

Description

Packing quantity

9000

PESD5V0S1USF

DSN0603-2 2 mm pitch, 8 mm tape and reel

(SOD962)

-315

[1] For further information and the availability of packing methods, see Section 13.

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

8 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

10. Soldering

Footprint information for reflow soldering of leadless ultra small package; 2 terminals

SOD962

0.85

0.4

R0.025 (8×)

0.22

0.4

(2×)

0.12

(2×)

0.2

(2×)

solder land

solder land plus solder paste

solder paste deposit

solder resist

Dimensions in mm

sod962_fr

Fig 11. Reflow soldering footprint DSN0603-2 (SOD962)

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

9 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

11. Revision history

Table 10. Revision history

Document ID

Release date

20120716

Data sheet status

Change notice

Supersedes

PESD5V0S1USF v.1

Product data sheet

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

10 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

12. Legal information

12.1 Data sheet status

Document status^[1][2]

Product status^[3]

Development

Definition

Objective [short] data sheet

This document contains data from the objective specification for product development.

This document contains data from the preliminary specification.

This document contains the product specification.

Preliminary [short] data sheet Qualification

Product [short] data sheet Production

[1]

[2]

[3]

Please consult the most recently issued document before initiating or completing a design.

The term ‘short data sheet’ is explained in section “Definitions”.

The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nexperia.com.

Suitability for use — Nexperia products are not designed,

12.2 Definitions

authorized or warranted to be suitable for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of a Nexperia product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. Nexperia and its suppliers accept no liability for

inclusion and/or use of Nexperia products in such equipment or

applications and therefore such inclusion and/or use is at the customer’s own

risk.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Nexperia sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall prevail.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Nexperia products, and Nexperia

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the Nexperia

product is suitable and fit for the customer’s applications and

products planned, as well as for the planned application and use of

customer’s third party customer(s). Customers should provide appropriate

design and operating safeguards to minimize the risks associated with their

applications and products.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the Nexperia product is

deemed to offer functions and qualities beyond those described in the

Product data sheet.

Nexperia does not accept any liability related to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party customer(s). Customer is responsible for doing all necessary

testing for the customer’s applications and products using Nexperia

products in order to avoid a default of the applications and

12.3 Disclaimers

Limited warranty and liability — Information in this document is believed to

be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no

responsibility for the content in this document if provided by an information

source outside of Nexperia.

the products or of the application or use by customer’s third party

customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

In no event shall Nexperia be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Terms and conditions of commercial sale — Nexperia

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nexperia.com/profile/terms, unless otherwise

agreed in a valid written individual agreement. In case an individual

agreement is concluded only the terms and conditions of the respective

agreement shall apply. Nexperia hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of Nexperia products by customer.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Nexperia’s aggregate and cumulative liability towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the grant,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

11 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

In the event that customer uses the product for design-in and use in

automotive applications to automotive specifications and standards, customer

(a) shall use the product without Nexperia’s warranty of the

product for such automotive applications, use and specifications, and (b)

whenever customer uses the product for automotive applications beyond

Nexperia’s specifications such use shall be solely at customer’s

own risk, and (c) customer fully indemnifies Nexperia for any

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified,

the product is not suitable for automotive use. It is neither qualified nor tested

in accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of

liability, damages or failed product claims resulting from customer design and

use of the product for automotive applications beyond Nexperia’s

standard warranty and Nexperia’s product specifications.

non-automotive qualified products in automotive equipment or applications.

12.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

13. Contact information

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

PESD5V0S1USF

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 1 — 16 July 2012

12 of 13

PESD5V0S1USF

Nexperia

Unidirectional ESD protection diode

14. Contents

Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1

1.2

1.3

1.4

General description . . . . . . . . . . . . . . . . . . . . . 1

Features and benefits. . . . . . . . . . . . . . . . . . . . 1

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Quick reference data . . . . . . . . . . . . . . . . . . . . 1

Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

Ordering information. . . . . . . . . . . . . . . . . . . . . 2

Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4

Application information. . . . . . . . . . . . . . . . . . . 7

Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

Packing information . . . . . . . . . . . . . . . . . . . . . 8

Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10

Legal information. . . . . . . . . . . . . . . . . . . . . . . 11

Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11

Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

12.1

12.2

12.3

12.4

Contact information. . . . . . . . . . . . . . . . . . . . . 12

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 16 July 2012

PESD5V0S1USF [NEXPERIA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E