PESD5V0U5BV [NEXPERIA]
Ultra low capacitance bidirectional fivefold ESD protection arrayProduction;型号: | PESD5V0U5BV |
厂家: | Nexperia |
描述: | Ultra low capacitance bidirectional fivefold ESD protection arrayProduction 局域网 光电二极管 |
文件: | 总11页 (文件大小:205K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection
array
28 December 2022
Product data sheet
1. General description
Ultra low capacitance bidirectional fivefold ElectroStatic Discharge (ESD) protection array in an
ultra small and flat lead SOT666 Surface-Mounted Device (SMD) plastic package, designed to
protect up to five signal lines from the damage caused by ESD and other transients.
2. Features and benefits
•
Bidirectional ESD protection of up to five lines
•
•
•
•
ESD protection up to 10 kV
Ultra low diode capacitance: Cd = 2.9 pF
IEC 61000-4-2; level 4 (ESD)
Ultra low leakage current: IRM = 5 nA
3. Applications
•
•
•
•
•
Computers and peripherals
Portable electronics
Audio and video equipment
Cellular handsets and accessories
Communication systems
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tamb = 25 °C
-
-
5
V
Cd
diode capacitance
f = 1 MHz; VR = 0 V; Tamb = 25 °C
[1]
-
2.9
3.5
pF
[1] Measured from pin 1, 3, 4, 5 or 6 to pin 2.
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol
K1
Description
Simplified outline
Graphic symbol
cathode (diode 1)
common cathode
cathode (diode 2)
cathode (diode 3)
cathode (diode 4)
cathode (diode 5)
6
5
4
2
CC
1
2
3
6
5
4
3
K2
4
K3
5
K4
1
2
3
006aab346
SOT666
6
K5
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PESD5V0U5BV
SOT666
plastic, surface-mounted package; 6 leads; 0.5 mm pitch; SOT666
1.6 mm x 1.2 mm x 0.55 mm body
7. Marking
Table 4. Marking codes
Type number
Marking code
G7
PESD5V0U5BV
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
2 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Tj
Parameter
Conditions
Min
-
Max
150
150
150
Unit
°C
junction temperature
ambient temperature
storage temperature
Tamb
Tstg
-55
-65
°C
°C
ESD maximum ratings
VESD electrostatic discharge
voltage
IEC 61000-4-2; contact discharge
[1] [2]
-
-
10
8
kV
V
MIL-STD-883; human body model (HBM) [1] [2]
[1] Device stressed with ten non-repetitive ESD pulses.
[2] Measured from pin 1, 3, 4, 5 or 6 to pin 2.
I
PP
100 %
90 %
10 %
t
t = 0.6 ns to 1 ns
r
30 ns
60 ns
001aaa631
Fig. 1. ESD pulse waveform according to IEC 61000-4-2
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
3 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
9. Characteristics
Table 6. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VRWM
reverse standoff
voltage
Tamb = 25 °C
-
-
5
V
VBR
IRM
Cd
breakdown voltage
IR = 5 mA; Tamb = 25 °C
[1]
[1]
[1]
[1]
[1]
5.5
6.5
5
9.5
100
3.5
-
V
reverse leakage current VRWM = 5 V; Tamb = 25 °C
-
-
-
-
nA
pF
pF
Ω
diode capacitance
f = 1 MHz; VR = 0 V; Tamb = 25 °C
f = 1 MHz; VR = 5 V; Tamb = 25 °C
IR = 1 mA; Tamb = 25 °C
2.9
1.9
-
Rdiff
differential resistance
100
[1] Measured from pin 1, 3, 4, 5 or 6 to pin 2.
3.0
006aab036
I
PP
C
d
(pF)
2.6
I
R
I
-V
-V
-V
BR RWM
RM
CL
-I
-I
V
V
V
RM
R
RWM BR CL
2.2
1.8
-
+
-I
PP
0
1
2
3
4
5
006aaa676
V
(V)
R
f = 1 MHz; Tamb = 25 °C
Fig. 3. V-I characteristics for a bidirectional ESD
protection diode
Fig. 2. Diode capacitance as a function of reverse
voltage; typical values
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
4 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
ESD TESTER
4 GHz DIGITAL
OSCILLOSCOPE
RG 223/U
50 Ω coax
R
d
40 dB
ATTENUATOR
C
s
50 Ω
DUT
(DEVICE
UNDER
TEST)
IEC 61000-4-2 ed. 2 network
= 150 pF; R = 330 Ω
C
s
d
vertical scale = 10 V/div
horizontal scale = 15 ns/div
vertical scale = 10 V/div
horizontal scale = 100 ns/div
GND
GND
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
clamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
vertical scale = 10 V/div
horizontal scale = 15 ns/div
GND
GND
vertical scale = 10 V/div
horizontal scale = 100 ns/div
unclamped -8 kV ESD pulse waveform
(IEC 61000-4-2 network)
clamped -8 kV ESD pulse waveform
(IEC 61000-4-2 network)
006aab037
Fig. 4. ESD clamping test setup and waveforms
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
5 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
10. Application information
The device is designed for the protection of up to five bidirectional data or signal lines from the
damage caused by ESD and surge pulses. The device may be used on lines where the signal
polarities are both, positive and negative with respect to ground.
data- or transmission lines
1
2
3
6
5
4
ESD protection
device
aaa-035939
Fig. 5. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge
transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.
2. The path length between the device and the protected line should be minimized.
3. Keep parallel signal paths to a minimum.
4. Avoid running protected conductors in parallel with unprotected conductors.
5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops.
6. Minimize the length of the transient return path to ground.
7. Avoid using shared transient return paths to a common ground point.
8. Ground planes should be used whenever possible. For multilayer PCBs, use ground vias.
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
6 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
11. Package outline
Plastic surface-mounted package; 6 leads
SOT666
D
A
E
X
Y
S
S
H
E
6
5
4
pin 1 index
A
c
1
2
3
e
1
b
p
w
M
A
L
p
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
b
p
c
D
E
e
e
H
L
w
y
A
p
1
E
0.6
0.5
0.27
0.17
0.18
0.08
1.7
1.5
1.3
1.1
1.7
1.5
0.3
0.1
mm
1.0
0.5
0.1
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
04-11-08
06-03-16
SOT666
Fig. 6. Package outline SOT666
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
7 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
12. Soldering
2.75
2.45
2.1
1.6
solder lands
0.4
(6×)
0.3
(2×)
0.25
(2×)
placement area
0.538
0.55
(2×)
1.075
1.7
2
solder paste
occupied area
0.325 0.375
(4×) (4×)
Dimensions in mm
1.7
0.45
(4×)
0.6
(2×)
0.5
(4×)
0.65
(2×)
sot666_fr
Fig. 7. Reflow soldering footprint for SOT666
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
8 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
13. Revision history
Table 7. Revision history
Data sheet ID
Release date
20221228
Data sheet status
Change notice
Supersedes
PESD5V0U5BV v.2
Product data sheet
-
PESD5V0U5BF_PESD
5V0U5BV_1
Modifications:
•
The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia
•
•
•
Legal texts have been adapted to the new company name where appropriate
Family data sheet reduced to single type data sheet
Product changed to non-automotive qualification
PESD5V0U5BF_PESD 20080815
5V0U5BV_1
Product data sheet
-
-
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
9 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
14. Legal information
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status Product
Definition
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
[1][2]
status [3]
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
10 / 11
Nexperia
PESD5V0U5BV
Ultra low capacitance bidirectional fivefold ESD protection array
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Characteristics..............................................................4
10. Application information............................................. 6
11. Package outline.......................................................... 7
12. Soldering..................................................................... 8
13. Revision history..........................................................9
14. Legal information......................................................10
© Nexperia B.V. 2022. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 28 December 2022
©
PESD5V0U5BV
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2022. All rights reserved
Product data sheet
28 December 2022
11 / 11
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明