PUMH1-Q [NEXPERIA]
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩProduction;型号: | PUMH1-Q |
厂家: | Nexperia |
描述: | NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩProduction |
文件: | 总12页 (文件大小:231K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PUMH1-Q
NPN/NPN resistor-equipped double transistor;
R1 = 22 kΩ, R2 = 22 kΩ
24 April 2023
Product data sheet
1. General description
NPN/NPN Resistor-Equipped double Transistor (RET) in a very small SOT363 (SC-88) Surface-
Mounted Device (SMD) plastic package.
2. Features and benefits
•
100 mA output current capability
•
•
•
•
•
Built-in bias resistors
Simplifies circuit design
Reduces component count
Reduces pick and place costs
Qualified according to AEC-Q101 and recommended for use in automotive applications
3. Applications
•
•
•
Low current peripheral driver
Control of IC inputs
Replaces general-purpose transistors in digital applications
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Per transistor
VCEO
collector-emitter
voltage
open base
-
-
50
V
IO
output current
-
-
100
28.6
1.2
mA
kΩ
R1
bias resistor 1 (input)
bias resistor ratio
Tamb = 25 °C
[1]
[1]
15.4
0.8
22
1
R2/R1
[1] See section "Test information" for resistor calculation and test conditions.
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol
GND1
I1
Description
Simplified outline
Graphic symbol
O1 I2
GND2
TR2
GND (emitter) TR1
input (base) TR1
output (collector) TR2
GND (emitter) TR2
input (base) TR2
output (collector) TR1
2
6
5
4
3
3
O2
R1
R2
4
GND2
I2
TR1
R2
5
R1
1
2
6
O1
TSSOP6 (SOT363)
GND1
I1 O2
aaa-019894
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PUMH1-Q
TSSOP6
plastic, surface-mounted package; 6 leads; 0.65 mm pitch; SOT363
2.1 mm x 1.25 mm x 0.95 mm body
7. Marking
Table 4. Marking codes
Type number
Marking code[1]
H%2
PUMH1-Q
[1] % = placeholder for manufacturing site code
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
2 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Per transistor
VCBO
Parameter
Conditions
Min
Max
Unit
collector-base voltage
open emitter
-
-
-
-
-
-
-
50
V
VCEO
collector-emitter voltage open base
50
V
VEBO
emitter-base voltage
input voltage
open collector
positive
10
V
VI
40
V
negative
-10
100
200
V
IO
output current
mA
mW
Ptot
total power dissipation
Tamb ≤ 25 °C
Tamb ≤ 25 °C
[1]
[1]
Per device
Ptot
Tj
total power dissipation
junction temperature
ambient temperature
storage temperature
-
300
150
150
150
mW
°C
-
Tamb
Tstg
-55
-65
°C
°C
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.
006aac749
400
P
tot
(mW)
300
200
100
0
-75
-25
25
75
125
175
(°C)
T
amb
FR4 PCB, single-sided, 35 μm copper, tin-plated and standard footprint
Fig. 1. Per device: Power derating curve
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
3 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
9. Thermal characteristics
Table 6. Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Per transistor
Rth(j-a)
thermal resistance from in free air
junction to ambient
[1]
[1]
-
-
625
K/W
Per device
Rth(j-a)
thermal resistance from in free air
junction to ambient
-
-
417
K/W
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
006aac750
3
10
duty cycle = 1
Z
th(j-a)
(K/W)
0.75
0.33
0.5
0.2
2
10
0.1
0.05
0.01
0.02
0
10
1
-5
10
-4
-3
-2
10
-1
2
3
10
10
10
1
10
10
10
t
(s)
p
FR4 PCB, single-sided, 35 µm copper, tin-plated and standard footprint
Fig. 2. Per transistor: Transient thermal impedance from junction to ambient as a function of pulse duration;
typical values
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
4 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
10. Characteristics
Table 7. Characteristics
Tamb = 25°C unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Per transistor
V(BR)CBO
collector-base
breakdown voltage
IC = 100 µA; IE = 0 A
50
50
10
-
-
-
-
-
-
V
V(BR)CEO
V(BR)EBO
ICBO
collector-emitter
breakdown voltage
-
V
emitter-base
breakdown voltage
IC = 0 A; IE = 100 A
-
V
collector-base cut-off
current
VCB = 50 V; IE = 0 A; Tamb = 25 °C
100
nA
ICEO
collector-emitter cut-off VCE = 30 V; IB = 0 A; Tamb = 25 °C
-
-
-
-
-
-
100
5
nA
µA
µA
current
VCE = 30 V; IB = 0 A; Tamb = 150 °C
IEBO
emitter-base cut-off
current
VEB = 5 V; IC = 0 A; Tamb = 25 °C
180
hFE
DC current gain
VCE = 5 V; IC = 5 mA; Tamb = 25 °C
IC = 10 mA; IB = 0.5 mA; Tamb = 25 °C
60
-
-
-
-
VCEsat
collector-emitter
150
mV
saturation voltage
VI(off)
VI(on)
R1
off-state input voltage VCE = 5 V; IC = 100 µA; Tamb = 25 °C
on-state input voltage VCE = 0.3 V; IC = 5 mA; Tamb = 25 °C
-
1.1
1.7
22
1
0.8
-
V
2.5
15.4
0.8
-
V
bias resistor 1 (input)
bias resistor ratio
Tamb = 25 °C
[1]
[1]
28.6
1.2
2.5
kΩ
R2/R1
Cc
collector capacitance
VCB = 10 V; IE = 0 A; f = 1 MHz;
Tamb = 25 °C
-
pF
fT
transition frequency
VCE = 5 V; IC = 10 mA; f = 100 MHz;
Tamb = 25 °C
[2]
-
230
-
MHz
[1] See section "Test information" for resistor calculation and test conditions.
[2] Characteristics of built-in transistor
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
5 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
006aac794
006aac795
3
10
1
h
FE
(1)
V
CEsat
(V)
(2)
(3)
2
10
-1
10
(1)
(2)
(3)
10
-2
1
10
-1
10
2
-1
2
1
10
10
10
1
10
10
I
(mA)
I (mA)
C
C
VCE = 5 V
IC/IB = 20
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = -40 °C
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = -40 °C
Fig. 3. DC current gain as a function of collector
current; typical values
Fig. 4. Collector-emitter saturation voltage as a
function of collector current; typical values
006aac796
006aac797
10
10
V
I(on)
(V)
V
I(off)
(V)
(1)
(2)
(1)
(2)
(3)
(3)
1
1
-1
-1
10
10
-1
2
-1
10
1
10
10
10
1
10
I
(mA)
I (mA)
C
C
VCE = 0.3 V
VCE = 5 V
(1) Tamb = -40 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
(1) Tamb = -40 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig. 5. On-state input voltage as a function of collector Fig. 6. Off-state input voltage as a function of collector
current; typical values current; typical values
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
6 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
006aac798
006aac757
3
3
10
C
c
(pF)
f
T
(MHz)
2
1
0
2
10
10
-1
10
2
0
10
20
30
40
V
50
1
10
10
(V)
I (mA)
C
CB
f = 1 MHz; Tamb = 25 °C
VCE = 5 V; Tamb = 25 °C
Fig. 7. Collector capacitance as a function of collector- Fig. 8. Transition frequency as a function of collector
base voltage; typical values
current; typical values of built-in transistor
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
7 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
11. Test information
Quality information
This product has been qualified in accordance with the Automotive Electronics Council (AEC)
standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in
automotive applications.
Resistor calculation
•
Calculation of bias resistor 1 (R1)
•
Calculation of bias resistor ratio (R2/R1)
n.c.
I ; I
1
2
4
R1
I ; I
3
R2
GND
aaa-020082
Fig. 9. Per transistor: Resistor test circuit
Resistor test conditions
Table 8. Resistor test conditions
Type number
R1 (kΩ)
R2 (kΩ)
Test conditions
I1
I2
I3
I4
PUMH1-Q
22
22
150 μA
230 μA
-150 μA
-230 μA
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
8 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
12. Package outline
2.2
1.8
1.1
0.8
0.45
0.15
6
5
4
2.2 1.35
2.0 1.15
pin 1
index
1
2
3
0.25
0.10
0.3
0.2
0.65
1.3
Dimensions in mm
14-10-03
Fig. 10. Package outline TSSOP6 (SOT363)
13. Soldering
2.65
solder lands
solder resist
0.4 (2×)
1.5
2.35
0.6
(4×)
0.5
(4×)
solder paste
0.5
(4×)
0.6
(2×)
occupied area
0.6
(4×)
Dimensions in mm
1.8
sot363_fr
Fig. 11. Reflow soldering footprint for TSSOP6 (SOT363)
1.5
solder lands
solder resist
occupied area
2.5
0.3
4.5
1.5
Dimensions in mm
preferred transport
direction during soldering
1.3
1.3
2.45
5.3
sot363_fw
Fig. 12. Wave soldering footprint for TSSOP6 (SOT363)
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
9 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
14. Revision history
Table 9. Revision history
Data sheet ID
PUMH1-Q v.2
Modifications:
Release date
20230424
Data sheet status
Change notice
Supersedes
Product data sheet
-
PUMH1-Q v.1
•
Characteristics: ICEO value corrected
PUMH1-Q v.1
20221114 Product data sheet
-
-
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
10 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
15. Legal information
Data sheet status
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status Product
Definition
[1][2]
status [3]
Applications — Applications that are described herein for any of these
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Product [short]
data sheet
This document contains the product
specification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Disclaimers
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
be suitable for use in life support, life-critical or safety-critical systems or
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
11 / 12
Nexperia
PUMH1-Q
NPN/NPN resistor-equipped double transistor; R1 = 22 kΩ, R2 = 22 kΩ
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Thermal characteristics............................................... 4
10. Characteristics............................................................5
11. Test information..........................................................8
12. Package outline.......................................................... 9
13. Soldering..................................................................... 9
14. Revision history........................................................10
15. Legal information......................................................11
© Nexperia B.V. 2023. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 24 April 2023
©
PUMH1-Q
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2023. All rights reserved
Product data sheet
24 April 2023
12 / 12
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明