PUSB3F96 [NEXPERIA]
ESD protection for ultra high-speed interfacesProduction;型号: | PUSB3F96 |
厂家: | Nexperia |
描述: | ESD protection for ultra high-speed interfacesProduction |
文件: | 总15页 (文件大小:1648K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PUSB3F96
ESD protection for ultra high-speed interfaces
Rev. 3 — 29 September 2014
Product data sheet
1. Product profile
1.1 General description
The device is designed to protect high-speed interfaces such as SuperSpeed USB,
High-Definition Multimedia Interface (HDMI), DisplayPort, external Serial Advanced
Technology Attachment (eSATA) and Low Voltage Differential Signaling (LVDS) interfaces
against ElectroStatic Discharge (ESD).
The device includes four high-level ESD protection diode structures for ultra high-speed
signal lines and is encapsulated in a leadless small DFN2510A-10 (SOT1176-1) plastic
package.
All signal lines are protected by a special diode configuration offering ultra low line
capacitance of only 0.5 pF. These diodes utilize a unique snap-back structure in order to
provide protection to downstream components from ESD voltages up to 10 kV contact
exceeding IEC 61000-4-2, level 4.
1.2 Features and benefits
System ESD protection for USB 2.0 and SuperSpeed USB 3.0, HDMI 2.0, DisplayPort,
eSATA and LVDS
All signal lines with integrated rail-to-rail clamping diodes for downstream
ESD protection of 10 kV exceeding IEC 61000-4-2, level 4
Matched 0.5 mm trace spacing
Signal lines with 0.05 pF matching capacitance between signal pairs
Line capacitance of only 0.5 pF for each channel
Design-friendly ‘pass-through’ signal routing
1.3 Applications
The device is designed for high-speed receiver and transmitter port protection:
TVs and monitors
DVD recorders and players
Notebooks, main board graphic cards and ports
Set-top boxes and game consoles
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
2. Pinning information
Table 1.
Pinning
Pin Symbol
Description
Simplified outline
Graphic symbol
1
2
3
4
5
6
7
8
9
10
CH1
CH2
GND
CH3
CH4
n.c.
channel 1 ESD protection
channel 2 ESD protection
ground
1
2
4
5
10
9
8
7
6
channel 3 ESD protection
channel 4 ESD protection
not connected
1
2
3
4
5
Transparent top view
3, 8
018aaa001
n.c.
not connected
GND
n.c.
ground
not connected
n.c.
not connected
3. Ordering information
Table 2.
Ordering information
Type number
Package
Name
Description
Version
PUSB3F96
DFN2510A-10 plastic extremely thin small outline package;
SOT1176-1
no leads; 10 terminals; body 1 2.5 0.5 mm
4. Marking
Table 3.
Marking codes
Type number
PUSB3F96
Marking code
96
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VI
Parameter
Conditions
Min
Max
Unit
input voltage
0.5
+5.5
V
[1]
VESD
electrostatic discharge
voltage
IEC 61000-4-2, level 4
contact discharge
air discharge
10
15
40
55
+10
+15
+85
+125
kV
kV
C
C
Tamb
Tstg
ambient temperature
storage temperature
[1] All pins to ground.
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
2 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
6. Characteristics
Table 5.
Characteristics
Tamb = 25 C unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ Max Unit
VBR
ILR
breakdown voltage
reverse leakage current
forward voltage
II = 1 mA
6
-
-
-
V
per channel; VI = 3 V
II = 1 mA
-
1
A
V
VF
-
0.7
0.5
0.05
-
[1]
[1]
Cline
Cline
line capacitance
f = 1 MHz; VI = 3.3 V
f = 1 MHz; VI = 3.3 V
-
0.6
-
pF
pF
line capacitance
difference
-
[2]
rdyn
dynamic resistance
surge
positive transient
negative transient
TLP
-
-
0.41
0.26
-
-
[3]
positive transient
negative transient
IPP = 5.2 A
-
-
0.43
0.28
-
-
[2]
[2]
VCL
clamping voltage
positive transient
IPP = 4.4 A
-
-
4.6
-
-
V
V
negative transient
2.2
[1] This parameter is guaranteed by design.
[2] According to IEC 61000-4-5 (8/20 s current waveform).
[3] 100 ns Transmission Line Pulse (TLP); 50 ; pulser at 80 ns.
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
3 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
aaa-009368
aaa-009367
1.2
2
S
dd21
a
(dB)
-2
0.8
0.4
0
-6
-10
-14
6
7
8
9
10
0
1
2
3
4
5
10
10
10
10
10
V (V)
I
f (MHz)
differential mode
Cline
a =
---------------------------------
ClineV
= 0 V
I
Fig 1. Insertion loss; typical values
Fig 2. Relative capacitance as a function of input
voltage; typical values
aaa-009369
aaa-009370
0
120
Z
dif
S
dd21
(Ω)
(dB)
110
-20
(2)
100
90
-40
-60
(1)
80
6
7
8
9
10
10
10
10
10
10
40.0
40.5
41.0
41.5
42.0
f (MHz)
t (ns)
Sdd21 normalized to 100 ;
differential pairs CH1/CH2 versus CH3/CH4
tr = 200 ps; differential pair CH1 + CH2
(1) PUSB3F96 on reference board
(2) Reference board without device under test (DUT)
Fig 3. Crosstalk; typical values
Fig 4. Differential Time Domain Reflectometer (TDR)
plot; typical values
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
4 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
aaa-014157
Data rate: 5 Gbit/s
Vertical scale: 166.3 mV/div
Horizontal scale: 20 ps/div
Fig 5. USB 3.0 eye diagram, Printed-Circuit Board (PCB) with PUSB3F96
aaa-014158
Data rate: 5 Gbit/s
Vertical scale: 166.3 mV/div
Horizontal scale: 20 ps/div
Fig 6. USB 3.0 eye diagram, PCB without PUSB3F96 (reference)
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
5 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
aaa-014159
Test frequency: 148.5 MHz
Differential swing voltage: 810 mV
Horizontal scale: 34 ps/div
Fig 7. HDMI 2.0 TP1 eye diagram, PCB with PUSB3F96 (2160p, 60 Hz)
aaa-014160
Test frequency: 148.5 MHz
Differential swing voltage: 800 mV
Horizontal scale: 34 ps/div
Fig 8. HDMI 2.0 TP1 eye diagram, PCB without PUSB3F96 (2160p, 60 Hz, reference)
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
6 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
aaa-014161
Test frequency: 148.5 MHz
Differential swing voltage: 809 mV
Horizontal scale: 34 ps/div
Remark: Measured at Test Point 2 (TP2) worst cable emulator, reference cable equalizer and
worst case positive skew.
Fig 9. HDMI 2.0 TP2 eye diagram, PCB with PUSB3F96 (2160p, 60 Hz)
aaa-014162
Test frequency: 148.5 MHz
Differential swing voltage: 820 mV
Horizontal scale: 34 ps/div
Remark: Measured at Test Point 2 (TP2) worst cable emulator, reference cable equalizer and
worst case positive skew.
Fig 10. HDMI 2.0 TP2 eye diagram, PCB without PUSB3F96 (2160p, 60 Hz, reference)
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
7 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
aaa-009371
aaa-009372
6
0
I
I
PP
(A)
PP
(A)
4
2
0
-2
-4
-6
0
2
4
6
-2.5
-2.0
-1.5
-1.0
-0.5
0
V
(V)
V
(V)
CL
CL
IEC 61000-4-5; tp = 8/20 s; positive pulse
IEC 61000-4-5; tp = 8/20 s; negative pulse
Fig 11. Dynamic resistance with positive clamping;
typical values
Fig 12. Dynamic resistance with negative clamping;
typical values
aaa-009373
aaa-009374
14
0
I
I
(A)
(A)
12
-2
10
8
-4
-6
6
-8
4
-10
-12
-14
2
0
0
4
8
12
-6
-4
-2
0
V
(V)
V
(V)
CL
CL
tp = 100 ns; Transmission Line Pulse (TLP)
tp = 100 ns; Transmission Line Pulse (TLP)
Fig 13. Dynamic resistance with positive clamping;
typical values
Fig 14. Dynamic resistance with negative clamping;
typical values
The device uses an advanced clamping structure showing a negative dynamic resistance.
This snap-back behavior strongly reduces the clamping voltage to the system behind the
ESD protection during an ESD event. Do not connect unlimited DC current sources to the
data lines to avoid keeping the ESD protection device in snap-back state after exceeding
breakdown voltage (due to an ESD pulse for instance).
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
8 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
7. Application information
The device is designed to provide high-level ESD protection for high-speed serial
data buses such as HDMI, DisplayPort, eSATA and LVDS data lines.
When designing the Printed-Circuit Board (PCB), give careful consideration to impedance
matching and signal coupling. Do not connect the signal lines to unlimited current sources
like, for example, a battery.
A basic application diagram for the ESD protection of an HDMI interface is shown in
Figure 15.
PUSB3F96
TMDS_D2+
TMDS_CH2+
5
TMDS_GND
TMDS_CH2–
4
TMDS_D2–
GND
8
3
2
1
TMDS_D1+
TMDS_CH1+
TMDS_CH1–
TMDS_GND
TMDS_D1–
PUSB3F96
TMDS_D0+
TMDS_CH2+
TMDS_CH2–
GND
5
TMDS_GND
TMDS_D0–
4
3
8
TMDS_CLK+
TMDS_GND
HDMI
CONNECTOR
TMDS_CH1+
2
1
TMDS_CH1–
TMDS_CLK-
CEC
n.c.
DDC_CLK
DDC_DAT
GND
+5 V
HOT PLUG DETECTION
6
5
4
100 nF
IP4221CZ6
1
2
3
aaa-006751
Fig 15. Application diagram of HDMI ESD protection using PUSB3F96
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
9 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
8. Package outline
1.1
0.9
0.127
0.2 min
5
1
6
2.6
2.4
0.25
0.15
2
0.5
10
0.4
0.05 max
0.3
0.45
0.35
0.5 max
Dimensions in mm
12-05-23
Fig 16. Package outline DFN2510A-10 (SOT1176-1)
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
10 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
9. Soldering
Footprint information for reflow soldering of DFN2510A-10 package
SOT1176-1
Hx
C
Hy Ay By
0.05
D
P
0.05
Generic footprint pattern
Refer to the package outline drawing for actual layout
solder land
solder paste deposit
solder land plus solder paste
occupied area
solder resist
Dimensions in mm
Remark:
P
Ay
By
C
D
Hx
Hy
Stencil of 75 μm is recommended.
A stencil of 75 μm gives an aspect ratio of 0.77
With a stencil of 100 μm one will obtain an aspect ratio of 0.58
0.5
1.25
0.3
0.475
0.2
2.45
1.5
sot1176-1_fr
Fig 17. Reflow soldering footprint DFN2510A-10 (SOT1176-1)
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
11 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
10. Revision history
Table 6.
Revision history
Document ID
PUSB3F96 v.3
Modifications:
Release date
Data sheet status
Change notice
Supersedes
20140929
Product data sheet
-
PUSB3F96 v.2
• Section 1 “Product profile”: updated
• Figure 5 to 10: added
PUSB3F96 v.2
PUSB3F96 v.1
20131101
Product data sheet
-
-
PUSB3F96 v.2
-
20130226
Product data sheet
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
12 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
Suitability for use — Nexperia products are not designed,
11.2 Definitions
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the Nexperia
product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications and
11.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an information
source outside of Nexperia.
the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — Nexperia
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
13 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies Nexperia for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond Nexperia’s
standard warranty and Nexperia’s product specifications.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
non-automotive qualified products in automotive equipment or applications.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Nexperia’s warranty of the
12. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
PUSB3F96
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 3 — 29 September 2014
14 of 15
PUSB3F96
Nexperia
ESD protection for ultra high-speed interfaces
13. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Application information. . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12
3
4
5
6
7
8
9
10
11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11.1
11.2
11.3
11.4
12
13
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 29 September 2014
相关型号:
PUSB6B-LF
Trans Voltage Suppressor Diode, 500W, 5.25V V(RWM), Unidirectional, 1 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
©2020 ICPDF网 联系我们和版权申明