MRP [NIDEC]

Pulse Switches;


型号：	MRP
厂家：	NIDEC COMPONENTS
描述：	Pulse Switches
文件：	总3页 (文件大小：442K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MRP

RoHS Compliant

Pulse Switches

■ Speciꢀcations

Rating

Dielectric strength 250VAC 1 minute

Insulation resistance 100MΩ min.

Electrical life

■Features

1. Miniature size of 10 mm square.

10mA 5VDC

2. Gold-plated contacts for high contact reliability.

3. Easy mounting on PC board in a single-touch

operation is ensured. Compatible with auto soldering.

（250VDC）

10,000 cycles

0.098～0.98N・cm

－20～＋70℃

－40～＋85℃

Operating force

Operating

temperature range

Storage

temperature range

■Part Numbering

MRP 1

Mounting

Fig.

ꢀ ꢀ －ꢀ ꢀ －ꢀ

－

Series code

Number of poles

Number of pulse

Mounting

Bracket mounting

Nut mounting

Right angle

None

■Standard Accessories（for MRP 1－20－1 only）

《Supplied with switch》

Part Name

Nut

Washer

Part Number

140008010193

140008150123

Dimensions

Nickel Plated

Zinc plated

●We accept orders for custom-made knobs for MRP. Please contact us.

MRP

★MRP1－20－Zꢀ（Bracket mounting）

Terminal numbers are not shown on the switch.

★MRP1－20－1－Zꢀ（Nut mounting）

Terminal numbers are not shown on the switch.

★MRP1－20－R－Zꢀ（Right-angle）

Terminal numbers are not shown on the switch.

★：Made to order products.

MRP

■Circuit Characteristics

Step angle

Operating direction

Clockwise

Connecting terminal

2－1

2－3

Counterclockwise

360°Endless : 20±2 pulses

■

Panel Cut-Out Dimensions

PC Hole Layouts

Panel thickness : 2 mm max.

（Top View）

Bracket mounting

Right angle

■Handling Precautions（MRP & DRS series）

1. Soldering Speciꢀcations

2. Flux Cleaning

⑴Manual Soldering

⑴ꢀFor the solvent, use the ꢁuorine-based or alcohol-based solvent.

Solvent: Fluorine or Alcohol type

Device ： Soldering iron

270℃, Max.; 3 seconds, Max.

⑵ Auto Soldering

⑵ꢀSince the MRP Series products are not waterproof-

structured, if the PC board is to be cleaned, clean the

soldering surface of substrate with a brush so that the

switch is not exposed to the cleaning solution.

Device: Jet wave type or dip type

260±5℃; 5 seconds, Max.

・Pre-heating should be done at temperatures of 100℃ or

below and within 30 sec.

⑶When soldering two or more terminals to the common

land, use the solder resist to solder them independently.

3. Mounting of Switch

⑴ Do not apply a load exceeding 29.4 N・cm to the ꢀxing screws.

⑵Do not bend the terminals before mounting the switch on the PC board.

⑶After mounting the switch, do not place the device in such a way that the device weight

will be applied on the knob, etc. of the switch.

⑷Do not apply a load exceeding 16.7 N to the knob.

相关型号：