778396-01 [NI]
S Series Multifunction DAQ 12 or 16-Bit,1 to 10 MS/s, 4 Analog Inputs; S系列多功能DAQ 12位或16位， 1至10 MS / s时， 4个模拟输入
| 型号： | 778396-01 |
| 厂家： | 
National Instruments |
| 描述： | S Series Multifunction DAQ 12 or 16-Bit,1 to 10 MS/s, 4 Analog Inputs |
| 文件： | 总8页 (文件大小：580K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S Series Multifunction DAQ 12 or 16-Bit,
1 to 10 MS/s, 4 Analog Inputs
NI 6120, NI 6115, NI 6110, NI 6111
• 2 or 4 analog inputs; dedicated
A/D converter per channel
• 1 to 10 MS/s per channel
maximum sample rate
• Analog and digital triggering
• AC or DC coupling
Recommended Software
• LabVIEW 7.x or higher
• LabWindows/CVI 7.x or higher
• Measurement Studio 7.x or higher
• Digital Waveform Editor
• SignalExpress 1.x or higher
• 8 input ranges from 200 mV
to 42 V
Other Compatible Software
• VI Logger 2.x or higher
• Visual Studio .NET
• 2 analog outputs at 4 MS/s single
channel or 2.5 MS/s dual channel
• 8 digital I/O lines
• Visual Basic, C/C++, and C#
(5 V TTL/CMOS)
Measurement Services
Software (included)1
• Two 24-bit counter/timers
• Measurement services that simplify
configuration and measurements
• NI-DAQmx driver software
• Measurement & Automation
Explorer configuration utility
• VI Logger Lite data-logging software
Operating Systems
• Windows 2000/NT/XP
• Mac OS X
1Mac OS X and Linux applications
must use NI-DAQmx Base driver software.
• Linux
Calibration Certificate Available
Analog
Inputs
4
4
4
2
Input
Sampling
Input
Analog
Outputs
2
2
2
2
Max Output
Rate (MS/s)
Output
Range (V)
10
10
10
10
Digital
Counter/
Timers
2, 24-bit
2, 24-bit
2, 24-bit
2, 24-bit
Family
NI 6120
NI 6115
NI 6110
NI 6111
Bus
PCI, PXI
PCI, PXI
PCI
Resolution (bits) Rate (MS/s)
Range (V)
0.2 to 42
0.2 to 42
0.2 to 42
0.2 to 42
I/O
82
82
8
Triggers
16
12
12
12
13
10
5
41
41
41
41
Analog, digital
Analog, digital
Analog, digital
Analog, digital
PCI
5
8
14 MS/s single channel; 2.5 MS/s on two channels 2Hardware-timed up to 10 MB/s 3800 kS/s with NI-DAQmx, 1 MS/s with additional download. Special conditions apply.
Table 1. Channel, Speed, and Resolution Specifications
Overview and Applications
Features
National Instruments S Series devices combine the latest in PC The NI high-performance S Series DAQ devices have the same
technologies to deliver simultaneous-sampling, high-bandwidth basic features of a typical multifunction device – eight digital I/O lines,
capabilities for low and high-channel-count data acquisition and control two counter/timers, two analog outputs, RTSI or PXI trigger bus for
systems. Use S Series devices in a variety of applications including:
• Stimulus/response applications where synchronization among high-
speed analog input (AI), analog output (AO), and digital I/O is required
• 42 V automotive applications
multidevice synchronization, and PFI lines for software-controlled routing
of timing and triggering signals. S Series devices exceed the analog input
performance of traditional multiplexed devices with features including:
Onboard Memory
(samples)
64 M
Signal
Input
Configuration
Family
NI 6120
Antialias Filters1 Coupling
5-pole Bessel,
DIO
• Radar, sonar, ultrasound
AC and DC Pseudodifferential Hardware-timed
• Transient/ballistics measurements
100 kHz
• High-energy physics
NI 6115
32 M or 64 M
3-pole Bessel
50 and 500 kHz
AC and DC Pseudodifferential Hardware-timed
• IF digitization
NI 6110
NI 6111
1Filter can be bypassed.
8,192
8,192
–
–
DC
DC
Pseudodifferential Software-timed
Pseudodifferential Software-timed
Table 2. Special Features
S Series Multifunction DAQ 12 or 16-Bit,
1 to 10 MS/s, 4 Analog Inputs
Dedicated A/D Converters per Channel – help you achieve faster NI LabVIEW Sound and Vibration Toolkit
sampling rates per channel, simultaneous sampling, and better This toolkit includes a full set of frequency-domain analysis and
dynamic accuracy for transient or frequency measurements.
presentation tools required for sound and vibration applications.
These tools include:
200 mV to 42 V Input Ranges – configure each analog input channel • Distortion, gain, phase, cross-talk, and dynamic range measurements
to read from a very wide variety of voltage ranges. The input • Octave analysis
impedance is lower for 20 and 42 V ranges, preserving the bandwidth • Swept-sine analysis
for signals with high frequencies and large amplitudes.
• Linear, exponential, and peak hold measurements
• Baseband and zoom FFT, power, FFT, power spectral density (PSD)
AC or DC Coupling – configure analog inputs for AC or DC coupling • Limit testing
on a per-channel basis. AC coupling removes the DC offset for • Short-time Fourier transform and shock response spectrum
applications only analyzing signals in the frequency domain.
• Weighting filters
• System calibration
Antialias Filters (NI 6115 and NI 6120) – the antialias filters are turned • Waterfall/colormap display
on from software on a per-channel basis. NI 6115 devices have 50 or
500 kHz filters for each channel, and NI 6120 devices have 100 kHz
filters for each channel.
Large Onboard Memory (NI 6115 and NI 6120) – NI 6120 devices
feature a 64 MS onboard memory, and NI 6115 devices feature a
64 or 32 MS onboard memory. With the extra memory, which
requires no extra programming, you can capture high-bandwidth
signals over long periods of time, even if multiple devices are sharing
the same PCI or PXI bus.
Hardware-Timed Digital I/O – the digital I/O lines can synchronize
with the analog input, analog output, counter/timer I/O, or an
external clock for mixed-signal measurement applications. Using the
onboard FIFO, you can achieve reliable data transfers to 10 MB/s.
Figure 1. Sound and Vibration Toolkit
Phase Locking (PXI only) – synchronize multiple devices to a
common PXI backplane clock to preserve the phase between
measurements across multiple device analog input channels.
NI LabVIEW Signal Processing Toolkit
This toolkit is a suite of software tools, example programs, and
utilities for time-frequency analysis and digital filter design. The
toolkit includes:
Professional Analysis and
Presentation Toolkits
There are several analysis and presentation add-on toolkits available • Wavelet and filter-bank design
from National Instruments that help make you more productive • Digital filter design of FIR and IIR filters
when developing custom applications with your S Series devices. • Joint time-frequency analysis (JTFA) with the Gabor spectrograph
Turn your S Series device into a transient recorder, spectrum • High-frequency resolution model-based spectral estimation for
analyzer, or one of several other instruments with these toolkits.
small datasets
2
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com
S Series Multifunction DAQ 12 or 16-Bit,
1 to 10 MS/s, 4 Analog Inputs
NI Spectral Measurements Toolkit
SCXI is limited to 100 kS/s for 16-bit accuracy and 333 kS/s for
This toolkit includes all of the analysis and presentation tools to 12-bit accuracy when used in multiplexed mode. However, in
convert your S Series device into a full-featured spectrum analyzer. parallel mode, the sample rate is limited by the maximum scan rate
The toolkit includes:
of the data acquisition device. When SCXI is used in parallel mode
with S Series, all channels are simultaneously sampled and the
sampling rate is limited by the S Series device, from 250 kS/s per
channel to 10 MS/s per channel.
• Measurements such as in-band power and adjacent-channel power
• 3D spectrogram
• Analog modulation and demodulation
• I-Q data for digital demodulation
• Highly optimized FFT processing
Measurement Services Software
National Instruments measurement services software, built
around NI-DAQmx driver software, includes intuitive application
High-Performance Data Throughput
Using NI-DAQmx driver software and S Series, you can take full programming interfaces, configuration tools, I/O assistants, and
advantage of your PC’s throughput potential, which is useful in other tools designed to reduce system setup, configuration, and
many applications including transient recording.
development time.
Flexible Data Transfer
Automatic Code Generation – DAQ Assistant is an interactive guide
With NI-DAQmx, you can choose where to accumulate data – on the that helps you navigate through configuring, testing, and programming
onboard memory, PC RAM memory, or PC hard drive memory. measurement tasks and automatically generates the necessary code
Thus, you can balance your PC application requirements and for LabVIEW, LabWindows/CVI, or Measurement Studio.
stream-to-disk/memory capabilities. In any case, NI-DAQmx
optimizes data transfers by using DMA (direct memory access) and Cleaner Code Development – Basic and advanced software functions
transferring large chunks of data, while ensuring no data loss. You have been combined into one easy-to-use yet powerful set to help
can also choose the format of your data, further optimizing you build cleaner code and move from basic to advanced
throughput. Choices include raw (binary), scaled, or the high-level applications without replacing functions.
waveform data type. Using these techniques, you can achieve rates of
more than 40 MS/s sustained over the PCI/PXI bus to hard drive High-Performance Driver Engine – NI-DAQmx delivers maximum
(depending on the PC).
I/O system throughput with a multithreaded driver.
Data Compaction
Test Panels – With the Measurement & Automation Explorer
With the release of NI-DAQmx 7.4 or later, data compaction is configuration utility, you can test all of your module functionality
available for stream-to-disk applications. The NI-DAQmx before you begin development.
compaction feature strips unused or unwanted bits of data from
each sample taken from your S Series device before it is permanently Scaled Channels – Easily scale your voltage data into the proper
recorded to hard disk. This is helpful because hard drives are engineering units using the NI-DAQmx Measurement Ready virtual
typically the throughput bottleneck compared to the PCI/PXI bus channels by choosing from a list of common sensors and signals or
and PC RAM memory read/write speed. Using data compression, creating your own custom scale.
users with standard hard drives can see up to 20 percent higher
throughput when streaming-to-disk.
Data-Logging Software – VI Logger Lite is configuration-based
software designed specifically for data logging. Features include
easy logging and viewing of data, data extraction to Microsoft
Signal Conditioning
With the release of NI-DAQmx 7.4 or later, all S Series devices are Excel, and code generation in LabVIEW.
compatible with parallel-mode SCXI modules.
LabVIEW Integration – All NI-DAQmx functions create the
waveform data type, which carries acquired data and timing
information directly into more than 400 LabVIEW built-in analysis
routines for display of results in engineering units on a graph.
Model
Description
Universal Strain Gage Input
Isolation Amplifier
Channels
SCXI-1520
SCXI-1125
SCXI-1141/2/3
8
8
8
8-Pole Lowpass Filters
Table 3. Most Popular Parallel-Mode SCXI Modules
NI-DAQmx Base Driver
NI-DAQmx Base (available at ni.com/downloads) offers Mac OS X
and Linux users a programming interface similar to NI-DAQmx. It
includes ready-to-use LabVIEW VIs and C function features similar
to those included in NI-DAQmx driver software.
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com 3
S Series Multifunction DAQ 12 or 16-Bit,
1 to 10 MS/s, 4 Analog Inputs
CH0+
+
CH0
Amplifier
–
AI CH0
Mux
Anti-
Aliasing
Filter
CH0
12-Bit
ADC
CH0
12
Data (16)
Data (16)
Data (16)
Latch
CH0–
CH1+
CH1–
CH2+
CH2–
CH3+
CH3–
+
CH1
Amplifier
–
Anti-
Aliasing
Filter
CH1
12-Bit
ADC
12
AI CH1
Mux
CH1
Latch
+
CH2
Amplifier
–
Anti-
Aliasing
Filter
CH2
12-Bit
ADC
12
12
AI CH2
Mux
CH2
Latch
Control
Generic
Bus
Interface
PCI
Bus
Interface
Mini
MITE
ADC
FIFO
Data (32)
+
CH3
Amplifier
–
Anti-
Aliasing
Filter
CH3
12-Bit
ADC
Address/Data
AI CH3
Mux
CH3
Latch
Data (16)
Calibration
Mux
AI Control
EEPROM
IRQ
2
Analog
Trigger Level
DACs
Trigger
DMA
Trigger
Circuitry
Analog Input
Analog Input
Control
EEPROM
Control
DMA
Trigger
Timing/Control
DMA/IRQ
PFI / Trigger
Timing
Interface
Counter/
Timing I/O
Bus
Interface
DAQ - STC
DAQ-STC
Bus Interface
DIO
FIFO
FPGA
Analog Output
Timing/Control
RTSI Bus
Interface
Analog
Output Control
DIO
Control
I/O Bus
Interface
STC DIO (8)
DIO FIO
Digital I/O
DIO
Mux
Digital I/O (8)
AO Control
Data (32)
FPGA Digital I/O (8)
DAC
FIFO
DAC0
DAC1
Data (12)
RTSI Bus
Calibration
DACs
Figure 2. NI 6120 and NI 6115 Hardware Block Diagram
4
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com
S Series Multifunction DAQ 12 or 16-Bit,
1 to 10 MS/s, 4 Analog Inputs
Voltage
REF
Calibration
DACs
Gain
Amplifier
ACH0+
ACH0-
AI CH0
Mux
CH0
12-Bit ADC
+
-
ACH1+
ACH1-
AI CH1
Mux
CH1
12-Bit ADC
+
-
ACH2+
ACH2-
AI CH21
Mux
CH2
12-Bit ADC
+
-
Control
Generic
Bus
Interface
PCI
Bus
Interface
ADC
FIFO
MITE
AI CH31
Mux
ACH3+
ACH3-
+
-
CH3
12-Bit ADC
Address/Data
1 Not available on PCI-6111
Calibration
Mux
AI Control
EEPROM
Trigger Level
DACs
IRQ
DMA
Analog
Trigger
Circuitry
Trigger
DMA/
Interrupt
Request
Analog Input
Timing/Control
Trigger
PFI / Trigger
Analog
Input
Control
EEPROM
Control
DMA
Interface
Bus
Interface
Counter/
Timing I/O
DAQ-STC
Bus
Interface
DAQ - STC
MIO
Timing
Interface
I/O
Bus
Interface
Analog
Output
Control
Analog Output
Timing/Control
RTSI Bus
Interface
Digital I/O
Digital I/O (8)
AO Control
Data (32)
DAC
FIFO
DAC0
DAC1
Calibration
DACs
RTSI Bus
Figure 3. NI 6110 and 6111 Hardware Block Diagram
Ordering Information
PCI
PXI
NI PCI-6120 ..................................................................778397-01
NI PCI-6115 with
32 MS ........................................................................778534-01
64 MS ........................................................................778554-01
NI PCI-6111 ..................................................................777530-01
NI PCI-6110 ..................................................................777475-01
NI PXI-6115 with
32 MS ........................................................................778194-01
64 MS ........................................................................778204-01
NI PXI-6120 ..................................................................778396-01
Includes data acquisition driver software.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S. only) or go to
ni.com/dataacquisition.
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com 5
S Series Multifunction DAQ 12 or 16-Bit,
1 to 10 MS/s, 4 Analog Inputs
Specifications
These specifications are typical for 25 °C unless otherwise noted.
Timing I/O
Number of channels
Analog Input
Input Characteristics
Number of channels
Up/down counter/timers...........................
Frequency scaler........................................
Resolution
2
1
Up/down counter/timers........................... 24 bits
Frequency scaler........................................ 4 bits
Compatibility .................................................... TTL/CMOS
Base clocks available
Up/down counter/timers........................... 20 MHz, 100 kHz
Frequency scaler........................................ 10 MHz, 100 kHz
Base clock accuracy ......................................... 0.01ꢁ
Maximum source frequency
NI 6110, NI 6115, NI 6120 ........................ 4 pseudodifferential
NI 6111 ...................................................... 2 pseudodifferential
ADC resolution
NI 6110, NI 6111, NI 6115 ........................ 12 bits, 1 in 4,096
NI 6120 ...................................................... 16 bits, 1 in 65,536
ADC pipeline
NI-6110, NI 6111 .......................................
NI 6115 ......................................................
NI 6120 ......................................................
Maximum sampling rate
3
4
0
Up/down counter/timers........................... 20 MHz
Minimum source pulse duration...................... 10 ns, edge-detect mode
Minimum gate pulse duration.......................... 10 ns, edge-detect mode
Data transfers .................................................. DMA (scatter-gather), interrupts, programmed I/O
NI 6110, NI 6111 ....................................... 5 MS/s
NI 6115 ...................................................... 10 MS/s
NI 6120 ...................................................... 1 MS/s1
Minimum sampling rate
Triggers
NI 6110, NI 6111 ....................................... 1 kS/s
NI 6115 ...................................................... 20 kS/s
NI 6120 ...................................................... No minimum
Input signal ranges
(selectable by channel).............................. 42, 20, 10, 5, 2, 1, 0.5, 0.2 ꢀ
Input coupling................................................... AC or DC
Max working voltage for all analog input channels
Overvoltage protection
(ACH+, ACH-) ............................................. 42 ꢀ
Input FIFO buffer
NI 6110, NI 6111 ....................................... 8,192 samples
NI 6115, NI 6120 ....................................... 16 Msamples or 32 Msamples
Data transfers .................................................. DMA (scatter-gather), interrupts, programmed I/O
Analog filter type
Analog Trigger
Purpose
Analog input .............................................. Start and stop trigger, gate, clock
Analog output............................................ Start trigger, gate, clock
General-purpose counter/timers............... Source, gate
Source............................................................... All analog input channels, PFI0/TRIG1
Level
Internal source, ACH<0..3> ....................... Full-scale
External source, PFI0/TRIG1...................... 10 ꢀ
Slope................................................................. Positive or negative; software-selectable
Resolution
NI 6110, NI 6111, NI 6115 ........................ 8 bits, 1 in 256
NI 6120 ...................................................... 12 bits, 1 in 4,096
Hysteresis......................................................... Programmable
Bandwidth (-3 dB)
Internal source, ACH<0..3> ....................... 5 MHz
External source, PFI0/TRIG1...................... 5 MHz
NI 6115 ...................................................... 3-pole Bessel
NI 6120 ...................................................... 5-pole Bessel
Analog filter frequency (-3 dB)
NI 6115 ...................................................... 50 and 500 kHz
NI 6120 ...................................................... 100 kHz
1800 kS/s with NI-DAQmx, 1 MS/s with additional download. Special conditions apply.
Digital Trigger
Purpose
Analog input .............................................. Start and stop trigger, gate, clock
Analog output............................................ Start trigger, gate, clock
General-purpose counter/timers............... Source, gate
External Sources .............................................. PFI<0..9>, RTSI<0..6>
Compatibility .................................................... 5 ꢀ/TTL
Response.......................................................... Rising or falling edge
Pulse width....................................................... 10 ns minimum
Analog Output
Output Characteristics
Number of channels......................................... 2 voltage
Resolution
NI 6110, NI 6111, NI 6120 ........................ 16 bits, 1 in 65,536
NI 6115 ...................................................... 12 bits, 1 in 4,096
Max update rate
PXI Trigger Bus (PXI only)
Trigger lines......................................................
7
7
1 channel .................................................. 4 MS/s
2 channel ................................................... 2.5 MS/s
Output FIFO buffer size
RTSI Bus (PCI only)
Trigger lines......................................................
NI 6110, NI 6111 ....................................... 2,048 samples
NI 6115, NI 6120 ....................................... 16 or 32 Msamples
Data transfers .................................................. DMA (scatter-gather), interrupts, programmed I/O
Bus Interface
PXI or PCI.......................................................... Master, slave
Physical
Voltage Output
Ranges.............................................................. 10 ꢀ
Dimensions (not including connectors)
PCI ............................................................ 31.2 by 10.6 cm (12.3 by 4.2 in.)
PXI ............................................................ 16 by 10 cm (6.3 by 3.9 in.)
I/O connector.................................................... 68-pin male SCSI II type
Output coupling................................................ DC
Digital I/O
Number of channels......................................... 8 input/output
Compatibility .................................................... TTL/CMOS
Power-on state ................................................. Input (high-impedence)
Data transfers
NI 6110, NI 6111 ....................................... Programmed I/O
NI 6115, NI 6120 ....................................... DMA (scatter-gather), interrupts, programmed I/O
Transfer rate
NI 6115, NI 6120 ....................................... 10 Mbytes/s
Input buffer size
NI 6115, NI 6120 ....................................... 2,048 bytes
Output buffer size
NI 6115, NI 6120 ....................................... 2,048 bytes
6
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com
S Series Multifunction DAQ
Cables and Accessories
Recommended Configurations
I/O Configuration
Accessory
Cable
BNC shielded
BNC-2110 (777643-01)
TB-2705 (778241-01)
SCB-68 (776844-01)
CB-68LPR (777145-02)
SH68-68-EP (184749-01)
–
SH68-68-EP (184749-01)
R6868 (777643-01)
Front-mount shielded screw terminals (PXI only)
Noise-rejecting shielded screw terminals
Low-cost unshielded screw terminals
SH68-68-EP Noise-Rejecting Shielded Cable
SH68-68-EP Shielded Cable
The SH68-68-EP is a shielded 68-conductor cable terminated with two 68-pin female
0.050 series D-type connectors. It features individually shielded analog twisted pairs
for reduced cross-talk with high-speed devices.
1 m ....................................................................................................................184749-01
2 m ....................................................................................................................184749-02
R6868 Low-Cost, Ribbon Cable
The R6868 is a 68-conductor flat ribbon cable terminated with two 68-pin female
0.050 series D-type connectors.
R6868 Ribbon Cable
1 m ....................................................................................................................182482-01
BNC-2110 Noise-Rejecting BNC I/O Connector Block
The BNC-2110 is a shielded connector block with signal-labeled BNC connectors for
easy connectivity of your analog input, digital I/O, and counter/timer signals.
BNC-2110 ........................................................................................................777643-01
Dimensions – 20.3 by 11.2 by 5.5 cm (8.0 by 4.4 by 2.2 in.)
TB-2705 Noise-Rejecting Front-Mount I/O Connector Block
BNC-2110 I/O Connector Block
The TB-2705 is a screw terminal block for your PXI DAQ devices. It latches to the
front of your PXI modules with locking screws and provides strain relief and easy access
to your analog, digital, trigger, and counter/timer signals through screw terminals.
TB-2705 ............................................................................................................778241-01
Dimensions – 8.43 by 10.41 by 2.03 cm (3.32 by 4.1 by 0.8 in.)
SCB-68 Noise-Rejecting Shielded I/O Connector Block
The SCB-68 is a shielded I/O connector block for rugged, very-low-noise signal
termination for connecting 68-pin DAQ devices. Silk-screened component locations
provide an easy addition of simple signal-conditioning circuitry for your analog input
channels. It also includes a general-purpose breadboard area as well as an IC
temperature sensor for cold-junction compensation in temperature measurements.
SCB-68 ..............................................................................................................776844-01
Dimensions – 19.5 by 15.2 by 4.5 cm (7.7 by 6.0 by 1.8 in.)
TB-2705 Terminal Block
CB-68LP and CB-68LPR Low-Cost I/O Connector Blocks
The CB-68 and CB-68LP are low-cost termination accessories with 68 screw
terminals for easy connector of field I/O signals to 68-pin DAQ devices. The
connector blocks include standoffs for use on a desktop or for mounting in a custom
panel. The CB-68LP has a vertical-mounted 68-pin connector. The CB-68-LPR has a
right-angle mounted connector, and it is used with the CA-1000.
SCB-68 Shielded I/O Connector Block
CB-68LP............................................................................................................777145-01
Dimensions – 14.35 by 10.74 cm (5.65 by 4.23 in.)
CB-68LPR ........................................................................................................777145-02
Dimensions – 7.62 by 16.19 cm (3.00 by 6.36 in.)
CB-68LP and CB-68LPR I/O Connector Blocks
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com 7
NI Services and Support
NI has the services and support to meet your
needs around the globe and through the
application life cycle – from planning
and development through deployment
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you
access to engineers who speak your language. NI delivers industry-
leading technical support through online knowledge bases, our
applications engineers, and access to 14,000 measurement and
automation professionals within NI Developer Exchange forums.
Find immediate answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of
technical support. Visit ni.com/ssp.
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
SERVICE
NEEDS
Training and Certification
NI training is the fastest, most certain route to productivity with our Hardware Services
products. NI training can shorten your learning curve, save NI Factory Installation Services
development time, and reduce maintenance costs over the NI Factory Installation Services (FIS) is the fastest and easiest way to
application life cycle. We schedule instructor-led courses in cities use your PXI or PXI/SCXI combination systems right out of the box.
worldwide, or we can hold a course at your facility. We also offer a Trained NI technicians install the software and hardware and
professional certification program that identifies individuals who configure the system to your specifications. NI extends the standard
have high levels of skill and knowledge on using NI products. warranty by one year on hardware components (controllers, chassis,
Visit ni.com/training.
modules) purchased with FIS. To use FIS, simply configure your
system online with ni.com/pxiadvisor.
Professional Services
Our Professional Services Team is comprised of NI applications Calibration Services
engineers, NI Consulting Services, and a worldwide National Instruments NI recognizes the need to maintain properly calibrated devices for
Alliance Partner program of more than 600 independent consultants high-accuracy measurements. We provide manual calibration
and integrators. Services procedures, services to recalibrate your products, and automated
range from start-up assistance calibration software specifically designed for use by metrology
to turnkey system integration. laboratories. Visit ni.com/calibration.
Visit ni.com/alliance.
Repair and Extended Warranty
OEM Support
NI provides complete repair services for our products. Express repair
We offer design-in consulting and product integration assistance and advance replacement services are also available. We offer
if you want to use our products for OEM applications. For extended warranties to help you meet project life-cycle requirements.
information about special pricing and services for OEM customers, Visit ni.com/services.
visit ni.com/oem.
ni.com • (800) 813 3693
National Instruments • info@ni.com
© 2005 National Instruments Corporation. All rights reserved. CVI, DAQ-STC, LabVIEW, Measurement Studio, MITE, National Instruments, National Instruments Alliance Partner, NI,
ni.com, NI-DAQ, RTSI, SCXI, and SignalExpress are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective
companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号：
©2020 ICPDF网 联系我们和版权申明