NICRIO-9052PXI [NI]
High-Speed PCI Interfaces for CompactRIO; 高速PCI接口用于CompactRIO的
| 型号： | NICRIO-9052PXI |
| 厂家： | 
National Instruments |
| 描述： | High-Speed PCI Interfaces for CompactRIO |
| 文件： | 总3页 (文件大小：250K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High-Speed PCI Interfaces for CompactRIO
NI cRIO-9052, NI cRIO-9052CardBus, NI cRIO-9052PXI, NI cRIO-9052PCI NEW!
• Laptop, PXI, or PC control of any
CompactRIO reconfigurable chassis
• High bandwidth for high-channel-count
CompactRIO applications
• Up to 50 MB/s sustained throughput
from any NI cRIO-910x chassis
• Up to 14 m cable length
• Dual 9 to 35 VDC supply inputs that
deliver isolated power to CompactRIO
chassis/modules
• -40 to 70 °C temperature range
laptop, PC, or PXI system from CompactRIO while the application
Overview and Applications
The National Instruments cRIO-9052 is a high-performance solution for
continues to run. This functionality eliminates the need to dedicate
the laptop, PC, or PXI system to the CompactRIO application only.
remote control of any NI cRIO-910x reconfigurable chassis using a laptop,
PXI system, or PC. With the NI cRIO-9052, you can interface with the FPGA
inside of a CompactRIO reconfigurable chassis at rates up to 50 MB/s. The
result is a reconfigurable solution ideal for applications requiring the
flexibility of the FPGA within CompactRIO and high bandwidth for
high-channel-count applications. The cRIO-9052 is designed for extreme
ruggedness, reliability, and low power consumption with dual 9 to
35 VDC supply inputs that deliver isolated power to the CompactRIO
chassis/modules and a -40 to 70 °C temperature range.
Ordering Information
CompactRIO Interface Module
NI cRIO-9052 ........................................................................779506-01
Laptop Interface Kit
NI cRIO-9052CardBus............................................................779528-01
Includes one cRIO-9052, one CardBus card (CardBus-8310), and two 3 m cables.
PXI Interface Kit
NI cRIO-9052PXI ....................................................................779529-01
Includes one cRIO-9052, one PXI module (PXI-8310), and two 3 m cables.
System Configuration
The cRIO-9052, attached to a cRIO-910x reconfigurable chassis,
PC Interface Kit
communicates with an NI 8310 device (CardBus, PXI, or PCI) over two
NI cRIO-9052PCI ..................................................................779530-01
Includes one cRIO-9052, one PCI board (PCI-8310), and two 3 m cables.
CAT-5 cables at distances up to 14 m. The cRIO-9052 and NI 8310
devices use a StarFabric interface to implement a PCI-to-PCI bridge,
providing a transparent link where the CompactRIO reconfigurable chassis
appears to users as if it were a PCI board within the host computer itself.
You can use built-in functions within NI LabVIEW and LabVIEW Real-Time
software for interfacing directly with the FPGA in the CompactRIO chassis.
This feature provides PXI and PC users the ability to build a deterministic,
real-time application to communicate with the LabVIEW code running on
the FPGA of a CompactRIO reconfigurable chassis. Once you have started
an application using the CompactRIO chassis, you can disconnect your
Cables
Ethernet Cable Kits (includes two cables)
3 m ....................................................................................779544-03
10 m ..................................................................................779544-10
14 m ..................................................................................779544-14
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S.) or go to ni.com/dataacquisition.
High-Speed PCI Interface for CompactRIO
Safety Standards
Specifications
StarFabric Communication
Interface.............................................. 4 LVDS transmit pairs,
4 LVDS receive pairs
Communication rates
The cRIO-9052 is designed to meet the requirements of the following
safety standards for electrical equipment for measurement, control,and
laboratory use:
EN 61010-1, IEC 61010-1
UL 61010-1
Theoretical maximum..................... 133 MB/s
Typical1 ........................................... 50 MB/s
1 This rate varies depending on your host system specifications, such as processor, RAM, and so on.
Cabling requirements
CAN/CSA-C22.2 No. 61010-1
Note: For UL and other safety certifications, refer to the product label, or
visit ni.com/certification.
Cables ............................................. 2 shielded CAT5 Ethernet cables
Maximum difference between
the lengths of the two cables.... 2.54 cm (1 in.)
Maximum cabling length................ 14 m (45.93 ft)
Environmental
The cRIO-9052 is intended for indoor use only. For outdoor use, mount
the CompactRIO system in a suitably rated enclosure.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2) ...... -40 to 70 °C
Power Requirements
You must use a National Electric Code (NEC) Class 2 power source with
the cRIO-9052.
Note: To meet this operating temperature range, follow the guidelines in
the installation instructions for the CompactRIO system.
Recommended power supply.............. 48 W secondary,
18 VDC to 24 VDC
Power consumption
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2) ...... -40 to 85 °C
Ingress protection ............................... IP 40
Operating humidity (IEC 60068-2-56)..... 10 to 90% RH, noncondensing
Storage humidity (IEC 60068-2-56)........ 5 to 95% RH, noncondensing
Maximum altitude............................... 2,000 m
cRIO-9052 only................................ 1.5 W, max
cRIO-9052 supplying power to
8 CompactRIO modules .................. 17 W, max1
Power supply
Pollution degree (IEC 60664) ..............
2
On power up ................................... 9 to 35 V
After power up ............................... 6 to 35 V
Shock and Vibration
To meet these specifications, you must panel mount the
CompactRIOsystem and affix ferrules to the end of the terminal wires.
1 This is the maximum amount of power that the entire system should consume
at the power connector.
Note: The cRIO-9052 powers up only at 9 V or higher, but after it is
powered up, it can run on as little as 6 V.
Operating vibration
Random (IEC 60068-2-64)............... 5 grms, 10 to 500 Hz
Sinusoidal (IEC 60068-2-6) ............. 5 g, 10 to 500 Hz
Operating shock (IEC 60068-2-27) ...... 30 g, 11 ms half sine, 50 g,
3 ms half sine,
Physical Characteristics
If you need to clean the device, wipe it with a dry towel.
Screw-terminal wiring. ....................... 12 to 24 AWG copper conductor
18 shocks at 6 orientations
wire with 10 mm (0.39 in.) of
insulation stripped from the end
Electromagnetic Compatibility
Emissions ............................................ EN 55011 Class A at 10 m FCC
•
Torque for screw terminals................. 0.5 to 0.6 N
m
Part 15A above 1 GHz
•
(4.4 to 5.3 lb in.)
Immunity.............................................. Industrial levels per EN
61326:1997 + A2:2001, Table A.1
EMC/EMI............................................. CE, C-Tick, and FCC Part 15
(Class A) Compliant
Weight.................................................... Approx. 546 g (19.2 oz)
Safety
Safety Voltages
Note: For EMC compliance, operate this device with shielded cabling.
Connect only voltages that are within these limits.
V-to-C............................................................ 35 V max, Measurement Category I
CE Compliance
Measurement Category I is for measurements performed on circuits not
directly connected to the electrical distribution system referred to as
MAINS voltage. MAINS is a hazardous live electrical supply system that
powers equipment. This category is for measurements of voltages from
specially protected secondary circuits. Such voltage measurements
include signal levels, special equipment, limited-energy parts of equipment,
circuits powered by regulated low-voltage sources, and electronics.
This product meets the essential requirements of applicable European
directives, as amended for CE marking, as follows:
Low-Voltage Directive (safety) ........... 73/23/EEC
Electromagnetic Compatibility
Directive (EMC)............................... 89/336/EEC
Note: Refer to the Declaration of Conformity (DoC) for this product for
any additional regulatory compliance information. To obtain the DoC for
this product, visit ni.com/certification.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
2
NI Services and Support
NI has the services and support to meet
Local Sales and Technical Support
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
SERVICE
NEEDS
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
that identifies individuals who have high levels of skill and knowledge on Trained NI technicians install the software and hardware and configure
using NI products. Visit ni.com/training.
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online with
Professional Services
Our Professional Services Team is comprised of NI applications engineers, ni.com/pxiadvisor.
NI Consulting Services, and a worldwide National Instruments Alliance
Calibration Services
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
ni.com • (800) 813 3693
National Instruments • info@ni.com
© 2005 National Instruments Corporation. All rights reserved. CompactRIO, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, and SCXI are
trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.
A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
2005-6296-161-101
相关型号：
©2020 ICPDF网 联系我们和版权申明