NIPCI-7830R [NI]

R Series Intelligent DAQ-Data Acquisition and Control with Onboard Processing; R系列智能数据采集，数据采集和控制与板载处理


型号：	NIPCI-7830R
厂家：	National Instruments
描述：	R Series Intelligent DAQ-Data Acquisition and Control with Onboard Processing R系列智能数据采集，数据采集和控制与板载处理
文件：	总8页 (文件大小：189K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

NI 781xR, NI 783xR, NI PXI-784xR, NI PXI-785xR NEW!

• Onboard FPGA chip, programmable

with the LabVIEW FPGA Module

• User-defined triggering, timing, and

decision making in hardware with

25 ns resolution

• Up to 8 analog inputs, independent

sampling rates up to 750 kHz,

16-bit resolution

• Up to 8 analog outputs, independent

update rates up to 1 MHz,

16-bit resolution

Operating Systems

• Windows XP/2000

• LabVIEW Real-Time

Recommended Software

• LabVIEW

• LabVIEW FPGA Module

• LabVIEW code compiler for FPGAs

• Emulated debugging mode

• LabVIEW Real-Time Module

Driver Software (included)

• NI-RIO

• Up to 160 digital lines configurable as

inputs, outputs, counters, or custom

logic at rates up to 40 MHz

• Direct memory access (DMA) channels

for high-speed data streaming

• Implement custom control logic,

inline signal processing, and digital

communication protocols

Calibration Certificate Available

Analog Inputs

(16-Bit)

Max Sampling Rate

per Channel (kS/s)

Analog Outputs

(16-Bit)

Max Update Rate

per Channel (MS/s)

Product

Multifunction R Series

NI 7851R

Bus/Form Factor

FPGA

Digital I/O

PXI

Virtex-5 LX30

Virtex-5 LX50

Virtex-5 LX85

Virtex-5 LX110

Virtex-5 LX30

Virtex-5 LX50

Virtex-II 1M gates

Virtex-II 3M gates

750

200

NI 7852R

NI 7853R

NI 7854R

NI 7841R

NI 7842R

NI 7830R

NI 7831R

NI 7833R

PXI

PCI, PXI

Digital R Series

NI 7811R

PCI, PXI

Virtex-II 1M gates

Virtex-II 3M gates

–

160

NI 7813R

Table 1. R Series Selection Guide

Overview

Key Features

Intelligent DAQ is multifunction data acquisition that features user-

defined onboard processing as well as complete flexibility of I/O

timing and triggering. You can configure all device functionality by

creating NI LabVIEW block diagrams with the LabVIEW FPGA Module.

Your block diagram executes in hardware, giving you direct, immediate

control of all I/O signals on the PXI or PCI device. With R Series and

LabVIEW FPGA, you can configure user-defined hardware for a wide

variety of applications requiring precise timing and control such as:

• Data acquisition with flexible triggering and onboard processing

• High-speed analog and discrete control loops

Through programming in LabVIEW FPGA, you can control each of the

I/O signal lines independently or synchronize a line with other channels.

You can configure the digital I/O lines as custom counter/timers, PWM

channels, or communication buses for user-defined protocols. All

multifunction R Series devices have dedicated analog-to-digital

converters/digital-to-analog converters on every analog I/O channel.

This offers specialized functionality such as multirate sampling and

individual channel triggering, which are beyond the capabilities of

typical data acquisition hardware. You can sample every analog input

channel on an R Series device simultaneously at rates up to 750 kHz,

and you can program every analog output on an R Series device to

update simultaneously at rates up to 1 MHz. You can also store your

compiled LabVIEW FPGA application in the onboard flash memory of

any R Series device and configure it for automatic loading and/or

execution at power up.

• Pulse-width modulation (PWM) and encoder interfacing

• User-defined digital communication protocols

• Custom counters with up to 64-bit resolution

• Hardware-timed decision making at 40 MHz

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

New Virtex-5 FPGAs

The new NI PXI-784xR and PXI-785xR modules use new Virtex-5 field-programmable gate arrays (FPGAs) with improved optimization capabilities

that provide faster code execution and increased code capacity. These Virtex-5 FPGAs feature a new six-input lookup table (LUT) architecture

for substantially improved resource utilization as well as DSP48 slices that make it possible for you to implement more complex digital signal

processing at faster rates. Previous-generation Virtex-II FPGAs use four-input LUTs for up to 16 combinations of digital logic values. The new

Virtex-5 FPGAs use six-input LUTs for up to 64 combinations, increasing the amount of logic that you can implement per slice. In addition, the slices

themselves are placed in closer proximity to each other to reduce the propagation delay of electrons and increase overall execution rates. The

single-cycle timed loop structure in LabVIEW FPGA takes full advantage of six-input LUTs for substantially improved resource utilization. This means

you can optimize more LabVIEW FPGA code to fit within Virtex-5 FPGAs and perform more operations per clock cycle.

Figure 1. General logic benchmarks show that Virtex-5 FPGAs offer larger sizes when

compared to Virtex-II FPGAs.

Figure 2. Execution speed benchmarks show that Virtex-5 FPGAs feature faster processing

capabilities when compared to Virtex-II FPGAs.

For more information on LabVIEW FPGA benchmarks for Virtex-5 FPGAs, visit ni.com/info and enter lvfpgabenchmarks.

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

Required Software for R Series Intelligent DAQ

• NI 781xR and 783xR devices require the LabVIEW FPGA Module 7.1

or later and NI-RIO 1.3 or later driver software.

Recommended Accessories

High Performance

SHC68-68-RMIO – High-performance shielded 68-conductor cable

terminated with a VHDCI 68-pin male connector at one end and a

68-pin female 0.050 D-type connector at the other end that has been

specifically designed for the multifunction I/O connector on R Series

• NI 784xR and 785xR devices require the LabVIEW FPGA Module 8.5.1

or later and NI-RIO 2.4 or later.

• NI 7853R and 7854R devices require the LabVIEW FPGA Module 8.6

or later and NI-RIO 3.0 or later.

intelligent DAQ devices.

1 m .....................................................................189588-01

2 m .....................................................................189588-02

Low-Cost Signal Conditioning and Channel Expansion

The NI cRIO-9151 R Series expansion chassis connects directly to any

digital connector on R Series devices and houses up to four C Series I/O

modules for industrial signal conditioning, I/O channel expansion, and

direct sensor connectivity.

SHC68-68-RDIO – High-performance shielded 68-conductor cable

terminated with a VHDCI 68-pin male connector at one end and a

68-pin female 0.050 D-type connector at the other end that has been

specifically designed for the digital I/O connector on R Series intelligent

DAQ devices.

1 m .....................................................................191667-01

SCB-68 – Shielded I/O connector block for rugged, very low-noise signal

termination for connecting to 68-pin devices. The SCB-68 also includes

two general-purpose breadboard areas.

Dimensions – 19.5 by 15.2 by 4.5 cm (7.7 by 6.0 by 1.8 in.)

SCB-68 .................................................................776844-01

Ordering Information

Low Cost

PCI

SH68-C68-S – General-purpose shielded cable that connects any type

NI PCI-7811R................................................................779363-01

NI PCI-7813R................................................................779370-01

NI PCI-7830R................................................................779361-01

NI PCI-7831R................................................................778797-01

NI PCI-7833R................................................................779359-01

of R Series connector to 68-pin connector blocks.

0.5 m...................................................................186381-0R5

1 m .....................................................................186381-01

2 m .....................................................................186381-02

PXI

Custom Cabling

NI PXI-7811R................................................................778800-01

NI PXI-7813R................................................................779362-01

NI PXI-7830R................................................................779364-01

NI PXI-7831R................................................................778668-01

NI PXI-7833R................................................................779360-01

NI PXI-7841R................................................................780337-01

NI PXI-7842R................................................................780338-01

NI PXI-7851R................................................................780339-01

NI PXI-7852R................................................................780340-01

NI PXI-7853R................................................................780341-01

NI PXI-7854R................................................................780342-01

Includes NI-RIO driver software.

SHC68-NT-S – Shielded 68-conductor cable terminated with a 68-pin

male VHDCI connector at one end and unterminated bare wires at the

other. Use this cable, ideal for OEM applications, to create custom

cabling solutions for R Series devices.

2 m .....................................................................189041-02

NSC68-262650 – Shielded cable terminated with a VHDCI 68-pin male

connector at one end and two 26-pin ribbon connectors and one 50-pin

ribbon connector on the other; designed to connect the R Series RMIO

connector to standard ribbon cable accessories.

1 m .....................................................................189151-01

NSC68-5050 – Shielded cable terminated with a VHDCI 68-pin male

connector at one end and two 50-pin ribbon connectors on the other;

designed to connect R Series RDIO connectors to standard ribbon

BUY NOW!

cable accessories.

1 m .....................................................................189152-01

For complete product specifications, pricing, and accessory

information, call 800 813 3693 (U.S.) or go to ni.com/rseries.

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

Accuracy Information – NI 784xR/785xR

Specifications

Analog Input (NI 783xR/784xR/785xR Only)

Absolute Accuracy

Relative Accuracy

Nominal

Range (V)

Noise +

Quantization

Absolute

Accuracy Resolution (µV)

Temp at Full

Drift Scale

(%/°C) ( mV)

% of Reading

Positive Negative

Full

Input Characteristics

Number of channels

Offset

(µV)

Full

Single

Point Averaged

Scale

Scale Hours 1 Year

Point Averaged

NI 7830R.........................................

NI 7831R/7833R/784xR/785xR ......

Input modes ........................................ DIFF, RSE, NRSE

(software-selectable; selection

10.0

Note:

-10.0 0.0186 0.0228 1,591 1,029 91.6 0.0005 3.97

1,205

121

Accuracies are valid for measurements following an internal calibration. Averaged numbers

assume dithering and averaging of 100 single-channel readings. Measurement accuracies are listed for

operational temperatures within 1 ꢀC of internal calibration temperature and 10 ꢀC of external or

factory-calibration temperature.

applies to all channels)

Type of ADC ........................................ Successive approximation

Resolution ........................................... 16 bits, 1 in 65,536

Conversion time

NI 783xR/NI 784xR......................... 4 µs

NI 785xR ......................................... 1 µs

Maximum sampling rate

NI 783xR/NI 784xR......................... 200 kS/s (per channel)

NI 785xR ......................................... 750 kS/s (per channel)

Input impedance

Powered on..................................... 10 GΩ in parallel with 100 pF

Powered off/overload..................... 4.0 kΩ min

Input signal range............................... 10 V

Input bias current

NI 783xR ......................................... 2 nA

NI 784xR/785xR.............................. 5 nA

Input offset current

NI 783xR ......................................... 1 nA

NI 784xR/785xR.............................. 5 nA

Input coupling ..................................... DC

Maximum working voltage

DC Transfer Characteristics

INL

NI 783xR ......................................... 3 LSB typ, 6 LSB max

NI 784xR/785xR.............................. 1 LSB typ, 3 LSB max

DNL

NI 783xR ......................................... -1.0 to +2.0 LSB max

NI 784xR/785xR.............................. 0.4 LSB typ, 0.9 LSB max

No missing codes

NI 783xR ......................................... 16 bits typ, 15 bits min

NI 784xR/785xR.............................. 16 bits guaranteed

CMRR, DC to 60 Hz............................. -86 dB

Settling Time

Accuracy

Device

Step Size

16 LSB

7.5 µs

2.7 µs

1.7 µs

2.1 µs

1.3 µs

0.8 µs

4 LSB

10.3 µs

4.1 µs

2.9 µs

4.2 µs

1.6 µs

1.1 µs

2 LSB

40 µs

5.1 µs

3.6 µs

8 µs

20.0 V

2.0 V

0.2 V

20.0 V

2.0 V

0.2 V

NI 783xR

NI 784xR/

785xR

1.8 µs

1.2 µs

(signal + common mode)............ Inputs should remain

within 12 V of ground

Crosstalk.............................................. -80 dB, DC to 100 kHz

Overvoltage protection

Dynamic Characteristics

Bandwidth

NI 783xR

Small signal (-3 dB).................... 650 kHz

Large signal (1% THD) ............... 55 kHz

NI 784xR/785xR

Small signal (-3 dB).................... 1 MHz

Large signal (1% THD) ............... 500 kHz

Powered on ................................ 42 V

Powered off................................ 35 V

Data transfers ..................................... DMA, interrupts, programmed I/O

Accuracy Information – NI 783xR

Absolute Accuracy

Relative Accuracy

Nominal

Noise +

Quantization

Absolute

Accuracy Resolution (µV)

Temp at Full

Range (V)

% of Reading

Positive Negative

Full

Offset

(µV)

Drift Scale

(%/°C) ( mV)

Analog Output (NI 783xR/784xR/785xR Only)

Full

Single

Point Averaged

Single

Point Averaged

Scale

Scale Hours 1 Year

Output Characteristics

Number of channels

NI 7830R.........................................

NI 7831R/7833R/784xR/785xR ......

10.0

Note:

-10.0 0.0496 0.0507 2,542 1779

165 0.0005 7.78

2,170

217

Accuracies are valid for measurements following an internal calibration. Averaged numbers

assume dithering and averaging of 100 single-channel readings. Measurement accuracies are listed for

operational temperatures within 1 ꢀC of internal calibration temperature and 10 ꢀC of external or

factory-calibration temperature.

Output type ......................................... Single-ended, voltage output

Resolution ........................................... 16 bits, 1 in 65,536

Update time ........................................ 1.0 µs

Maximum update rate ........................ 1 MS/s

Type of DAC ........................................ Enhanced R-2R

Data transfers ..................................... DMA, interrupts,

programmed I/O

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

Protection

Input

NI 781xR/783xR ......................... -0.5 to 7.0 V, single line

NI 784xR/785xR ......................... -20.0 to 20.0 V, single line

Output ............................................. Short-circuit (up to eight lines

may be shorted at a time)

Voltage Output

Range .................................................. 10 V

Output coupling................................... DC

Output impedance

NI 783xR ......................................... 1.25 Ω

NI 784xR/785xR.............................. 0.5 Ω

Current drive ....................................... 2.5 mA

Protection............................................ Short-circuit to ground

Power-on state.................................... User configurable

Minimum pulse width

Input................................................ 25 ns

Output ............................................. 12.5 ns

Minimum sampling period.................. 5 ns

Accuracy Information

Reconfigurable FPGA

Absolute Accuracy

Nominal Range (V)

Positive Negative

Full Scale Full Scale 24 Hours

% of Reading

Absolute

Temp Drift Accuracy at Full

NI 7811R/7830R/7831R

FPGA type............................................ Virtex-II 1000

Number of flip-flops............................ 10,240

Number of 4-input LUTs...................... 10,240

Number of 18x18 multipliers.............. 40

Offset (µv)

(%/°C)

Scale (mV)

1 Year

10.0

-10.0

0.0335

0.0351

2,366

0.0005

5.88

Accuracies are valid for analog output following an internal calibration. Analog output accuracies are

Note:

listed for operation temperatures within 1 ꢀC of internal calibration temperature and 10 ꢀC of external or

factory calibration temperature. Temperature drift applies only if ambient is greater than 10 ꢀC of previous

external calibration.

Embedded block RAM......................... 720 kb

NI 7813R/7833R

DC Transfer Characteristics

FPGA type............................................ Virtex-II 3000

Number of flip-flops............................ 28,672

Number of 4-input LUTs...................... 28,672

Number of 18x18 multipliers.............. 96

INL .................................................... 0.5 LSB typ, 4.0 LSB max

DNL .................................................... 0.5 LSB typ, 1 LSB max

Monotonicity....................................... 16 bits, guaranteed

Settling Time

Embedded block RAM......................... 1,728 kb

Accuracy

NI 7841R/7851R

Step Size

16 LSB

6.0 µs

2.2 µs

1.5 µs

4 LSB

6.2 µs

2.9 µs

2.6 µs

2 LSB

7.2 µs

3.8 µs

3.6 µs

20.0 V

2.0 V

0.2 V

FPGA type............................................ Virtex-5 LX30

Number of flip-flops............................ 19,200

Number of 6-input LUTs...................... 19,200

Number of DSP48

slices (25x18 multipliers)................ 32

Embedded block RAM......................... 1,152 kb

Dynamic Characteristics

Slew rate............................................. 10 V/µs

Noise................................................... 150 µV_rms, DC to 1 MHz

Glitch energy at midscale transition..... 200 mV for 3 µs

NI 7842R/7852R

FPGA type............................................ Virtex-5 LX50

Number of flip-flops............................ 28,800

Number of 6-input LUTs...................... 28,800

Number of DSP48

slices (25x18 multipliers)................ 48

Embedded block RAM......................... 1,728 kb

Digital I/O

Number of channels

NI 7811R/7813R ............................. 160

NI 7830R......................................... 56

NI 7831R/7833R/784xR/785xR ..... 96

Digital logic levels .............................. 3.3 V TTL, 5 V TTL Compatible

NI 7853R

Level

Input low voltage (V_IL)

Input high voltage (V_IH

Output low voltage (V_OL),

where I_OUT= -4 mA

Min (V)

0.0 V

2.0 V

–

Max (V)

0.8 V

5.5 V

FPGA type............................................ Virtex-5 LX85

Number of flip-flops............................ 51,840

Number of 6-input LUTs...................... 51,840

Number of DSP48

slices (25x18 multipliers)................ 48

Embedded block RAM......................... 3,456 kb

)

0.4 V

Output high voltage (V_OH),

where I_OUT= 4 mA

2.4 V

3.3 V

Output current

NI 7854R

Source............................................. 4.0 mA

Sink ................................................. 4.0 mA

Input leakage current.......................... 10 µA

Power-on state.................................... Programmable, by line

Data transfers ..................................... DMA, interrupts,

programmed I/O

FPGA type............................................ Virtex-5 LX110

Number of flip-flops............................ 69,120

Number of 6-input LUTs...................... 69,120

Number of DSP48

slices (25x18 multipliers)................ 64

Embedded block RAM......................... 4,608 kb

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

Timebases

Timebase reference sources

Maximum Working Voltage

Maximum working voltage refers to the signal voltage plus the

NI PCI-781xR/783xR ....................... Onboard clock only

NI PXI-78xxR................................... Onboard clock, phase-locked to

PXI 10 MHz clock

common-mode voltage.

Channel-to-earth................................. 12 V, Measurement Category I

Channel-to-channel............................. 24 V, Measurement Category I

LabVIEW FPGA derived clocks............ Up to 200 MHz

Timebase accuracy, onboard clock ..... 100 ppm, 250 ps

peak-to-peak jitter

Caution: Do not use the NI 783xR/784xR/785xR for connection to

signals in Measurement Category II, III, or IV.

Phase-locked to PXI 10 MHz clock

Power Requirement

(NI PXI-78xxR only) ......................... Adds 350 ps peak-to-peak jitter

Additional frequency-dependent peak-to-peak jitter

NI 781xR/783xR

40 MHz ....................................... None

80 MHz ....................................... 400 ps

120 MHz ..................................... 720 ps

160 MHz ..................................... 710 ps

200 MHz ..................................... 700 ps

NI 784xR/785xR

+5 VDC ( 5%)¹

NI 781xR ......................................... 9 mA (typ), 50 mA (max)

NI 7830R/7831R ............................. 330 mA (typ), 355 mA (max)

NI 7833R......................................... 364 mA (typ), 586 mA (max)

NI 7841R/7851R ............................. 125 mA (typ), 252 mA (max)

NI 7842R/7852R ............................. 136 mA (typ), 291 mA (max)

NI 7853R......................................... 460 mA typ

NI 7854R......................................... 484 mA typ

+3.3 VDC ( 5%)²

NI 7811R......................................... 650 mA (typ), 1,000 mA (max)

NI 7813R......................................... 850 mA (typ), 1,350 mA (max)

NI 7830R/7831R ............................. 462 mA (typ), 660 mA (max)

NI 7833R......................................... 727 mA (typ), 1,148 mA (max)

NI 7841R/7851R ............................. 525 mA (typ), 1,244 mA (max)

NI 7842R/7852R ............................. 604 mA (typ), 1,484 mA (max)

NI 7853R .................................................. 640 mA typ

NI 7854R .................................................. 843 mA typ

+12 V

NI 784xR/785xR.............................. 0.5 A

-12 V

NI 784xR/785xR.............................. 0.25 A

+5 V terminal

Connector 0..................................... 0.5 A max

Connector 1..................................... 0.5 A max

Connector 2..................................... 0.5 A max

All connectors................................. 1.5 A max³

To calculate the total current sourced by the digital outputs, use

the following equation:

40 MHz ....................................... None

80 MHz ....................................... 460 ps

120 MHz ..................................... 172 ps

Calibration (NI 783xR/784xR/785xR Only)

Recommended warm-up time............. 15 minutes

Calibration interval ............................. 1 year

Onboard calibration reference

DC level........................................... 5.000 V ( 3.5 mV) (actual value

stored in flash memory)

Temperature coefficient...................... 5 ppm/ꢀC max

Long-term stability.............................. 20 ppm/1,000 h

Note: Refer to Calibration Certificates at ni.com/calibration to

generate a calibration certificate for the NI 783xR.

Bus Interface

PXI (NI PXI-78xxR only) ....................... Master, slave

PCI (NI PCI-781xR/783xR only) ........... Master, slave

Physical

Dimensions (not including connectors)

NI PCI-781xR/783xR ......................... 17 by 11 cm (6.7 by 4.3 in.)

NI PXI-78xxR ..................................... 16 by 10 cm (6.3 by 3.9 in.)

Weight

NI PCI-781xR/783xR ....................... 112 g

NI PXI-78xxR................................... 152 g

I/O connectors

∑

current sourced on channel i

i=1

Power available at I/O connectors ..... 4.50 to 5.25 VDC at 1 A total,

250 mA per I/O connector pin

¹Does not include current drawn from the +5 V line on the I/O connectors.

²Does not include current sourced by the digital outputs.

³The NI 784xR/785xR devices have a user-replaceable socketed fuse that opens when current

exceeds the current specification. Refer to the R Series Intelligent DAQ User Manual, available

at ni.com/manuals, for information about fuse replacement.

NI 781xR ......................................... Four 68-pin female

high-density VHDCI type

NI 783xR/784xR/785xR .................. Three 68-pin female

high-density VHDCI type

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

R Series Intelligent DAQ –

Data Acquisition and Control with Onboard Processing

Environmental

Safety and Compliance

NI 78xxR devices are intended for indoor use only.

Safety

Operating Environment

NI 781xR.............................................. 0 to 55 ꢀC (tested in

NI 78xxR devices are designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

and laboratory use:

accordance with IEC-60068-2-1

and IEC-60068-2-2)

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

NI 7830R, NI 7831R

40 or 80 MHz timebase.................. 0 to 55 ꢀC (tested in

accordance with IEC-60068-2-1

and IEC-60068-2-2)

NI 7833R/7841R/7842R/7851R/7852R/7853R/7854R

40 MHz timebase ........................... 0 to 55 ꢀC (tested in

accordance with IEC-60068-2-1

and IEC-60068-2-2)

80 MHz timebase ........................... 0 to 55 ꢀC except the

following: 0 to 45 ꢀC when

Note: For UL and other safety certifications, refer to the product label or

visit ni.com/certification, search by model number or product line, and

click the appropriate link in the Certification column.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards

for electrical equipment for measurement, control, and laboratory use:

• EN 61326 (IEC 61326): Class A emissions; Basic immunity

• EN 55011 (CISPR 11): Group 1, Class A emissions

• AS/NZS CISPR 11: Group 1, Class A emissions

• FCC 47 CFR Part 15B: Class A emissions

installed in an NI PXI-1000/B or

NI PXI-101x (tested in

accordance with IEC-60068-2-1

and IEC-60068-2-2)

• ICES-001: Class A emissions

Relative humidity range...................... 10 to 90%, noncondensing

(tested in accordance with

CE Compliance

IEC-60068-2-56)

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

Altitude................................................ 2,000 m at 25 ꢀC

ambient temperature

• 2006/95/EC; Low-Voltage Directive (safety)

• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Storage Environment

Ambient temperature range ............... -20 to 70 ꢀC (tested in

Note: Refer to the Declaration of Conformity (DoC) for this product for

any additional regulatory compliance information. To obtain the DoC for

this product, visit ni.com/certification, search by model number or

product line, and click the appropriate link in the Certification column.

accordance with IEC-60068-2-1

and IEC-60068-2-2)

Relative humidity range...................... 5 to 95%, noncondensing

(tested in accordance with

IEC-60068-2-56)

Environmental Management

Note: Clean the device with a soft, nonmetallic brush. Make sure that

the device is completely dry and free from contaminants before returning

it to service.

National Instruments is committed to designing and manufacturing

products in an environmentally responsible manner. NI recognizes that

eliminating certain hazardous substances from our products is beneficial

not only to the environment but also to NI customers.

Shock and Vibration (for NI PXI-78xxR Only)

Operational shock ............................... 30 g peak, half-sine, 11 ms

For additional environmental information, refer to the NI and the

Environment Web page at ni.com/environment. This page contains the

environmental regulations and directives with which NI complies, as

well as other environmental information not included in this document.

pulse (tested in accordance

with IEC-60068-2-27; test

profile developed in accordance

with MIL-PRF-28800F)

Waste Electrical and Electronic Equipment (WEEE)

Random vibration

EU Customers: At the end of their life cycle, all products must be

sent to a WEEE recycling center. For more information about WEEE

recycling centers and National Instruments WEEE initiatives,

visit ni.com/environment/weee.htm.

Operating ........................................ 5 to 500 Hz, 0.3 g_rms

Nonoperating.................................. 5 to 500 Hz, 2.4 g_rms

(tested in accordance with

IEC-60068-2-64; nonoperating test

profile exceeds the requirements

of MIL-PRF-28800F, Class 3)

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

NI Services and Support

NI has the services and support to meet

Local Sales and Technical Support

your needs around the globe and through

the application life cycle – from planning

and development through deployment

and ongoing maintenance. We offer

services and service levels to meet

customer requirements in research,

design, validation, and manufacturing.

Visit ni.com/services.

In offices worldwide, our staff is local to the country, giving you access

to engineers who speak your language. NI delivers industry-leading

technical support through online knowledge bases, our applications

engineers, and access to 14,000 measurement and automation

professionals within NI Developer Exchange forums. Find immediate

answers to your questions at ni.com/support.

SERVICE

NEEDS

We also offer service programs that provide automatic upgrades to

your application development environment and higher levels of technical

support. Visit ni.com/ssp.

Training and Certification

NI training is the fastest, most certain route to productivity with our

products. NI training can shorten your learning curve, save development

time, and reduce maintenance costs over the application life cycle. We

schedule instructor-led courses in cities worldwide, or we can hold a

course at your facility. We also offer a professional certification program

Hardware Services

NI Factory Installation Services

NI Factory Installation Services (FIS) is the fastest and easiest way to

use your PXI or PXI/SCXI combination systems right out of the box.

that identifies individuals who have high levels of skill and knowledge on Trained NI technicians install the software and hardware and configure

using NI products. Visit ni.com/training.

the system to your specifications. NI extends the standard warranty by

one year on hardware components (controllers, chassis, modules)

purchased with FIS. To use FIS, simply configure your system online

with ni.com/pxiadvisor.

Professional Services

Our NI Professional Services team is composed of NI applications

and systems engineers and a worldwide National Instruments Alliance

Partner program of more than 600 independent consultants and

integrators. Services range

Calibration Services

NI recognizes the need to maintain properly calibrated devices for

high-accuracy measurements. We provide manual calibration

procedures, services to recalibrate your products, and automated

calibration software specifically designed for use by metrology

laboratories. Visit ni.com/calibration.

from start-up assistance to

turnkey system integration.

Visit ni.com/alliance.

OEM Support

We offer design-in consulting and product integration assistance if you

want to use our products for OEM applications. For information about

special pricing and services for OEM customers, visit ni.com/oem.

Repair and Extended Warranty

NI provides complete repair services for our products. Express repair

and advance replacement services are also available. We offer

extended warranties to help you meet project life-cycle requirements.

Visit ni.com/services.

ni.com • 800 813 3693

*351588B-01*

351588B-01

2008-10077-301-101-D

National Instruments • info@ni.com

Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from

National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments.

NIPCI-7830R [NI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E