NIPS-17 [NI]
Industrial Power Supplies; 工业电源
| 型号： | NIPS-17 |
| 厂家： | 
National Instruments |
| 描述： | Industrial Power Supplies |
| 文件： | 总4页 (文件大小：802K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Industrial Power Supplies
NI PS-15, NI PS-16, NI PS-17 NEW!
■
24 VDC power supplies for CompactRIO,
NI CompactDAQ, Compact FieldPoint,
NI Single-Board RIO, NI Smart Cameras,
and NI touch panel computers
■
Full output power between
-25 and +60 °C
■
115/230 V autoselect input
Efficiencies up to more than 90 percent
Low input rush current
20 or 50 percent power reserves
■
■
■
for dynamic loads
■
Toolless spring-clamp terminals
for easy field connectivity
DIN-rail mounting included and
■
panel/side mount accessories available
-25 to 70 °C operating
■
temperature range
Temperature
Range (°C)
Product
Output Voltage (V) Output Current (A) Output Power (W)
Input Voltage
Size WxHxD (mm)
Weight (g)
Part Number
PS-15
24 to 28
24 to 28
24 to 28
5
120
240
480
90 to 132/
180 to 264 VAC
-25 to +70
-25 to +70
-25 to +70
32 by 124 by 117
500
781093-01
PS-16
PS-17
10
20
90 to 132/
180 to 264 VAC
60 by 124 by 117
82 by 124 by 127
700
781094-01
781095-01
85 to 276 VAC/
88 to 375 VDC
1200
Table 1. NI Power Supply Selection Guide
Mounting Options
Overview and Applications
The PS-15/16/17 power supplies include clips for DIN-rail mounting.
National Instruments provides optional accessories for wall, panel, and side
mounting to minimize install depth. You can couple the included DIN-rail
mounting bracket with the side mount kit for a low-profile DIN-rail installation.
The NI PS-15, PS-16, and PS-17 industrial power supplies feature long expected
life, generous power reserves, and compact size. The 24 V supplies are ideal
for powering any NI CompactRIO, NI Compact FieldPoint, NI Single-Board RIO,
NI Smart Camera, NI touch panel, or NI CompactDAQ system, as well as heavy
accessory loads such as DC motor drives. The DIN-rail system and spring clamp
terminals do not require tools and make installation fast and easy. Wide range
and autoselect input voltages help you avoid user errors. The wide operating
temperature range and extraordinary EMI immunity enables trouble-free
operation even under harsh conditions.
Installed
Width
(mm)
Installed
Height
(mm)
Part
Number
Installed Depth
(mm)
Bracket
Weight (g)
Product
199432-01
199429-01
199430-01
199431-01
Panel mount kit
for PS-15/16/17
Equal to
PS width
143
145
145
145
PS depth + 7
50
Side mount kit
for PS-15
118
118
138
38 (panel)/
44 (DIN)
140
180
205
Depending on the device, NI industrial power supplies guarantee power
reserves of 20 to 50 percent. For the PS-15 and PS-16, you can use this extra
current continuously for ambient temperatures under 45 °C. With these power
reserves, you may not need to oversize for dynamic loads, but you can simply
choose a unit that meets the operating requirements. In some cases, you can
select a smaller unit to save money and space.
Side mount kit
for PS-16
66 (panel)/
72 (DIN)
Side mount kit
for PS-17
88 (panel)/
94 (DIN)
Table 2. NI Power Supply Mounting Accessories (See the NI PS-15/16/17 User Guide
manual at ni.com/manuals for more information.)
Industrial Power Supplies
Environmental
Specifications
Operational Temperature
Specifications subject to change without notice. For complete specifications,
see the NI PS-15/16/17 User Guide manual at ni.com/manuals.
PS-15/16/17...................................... -25 to +70 °C
(reduce output power above 60 °C)
Dimensions and Weight
Output Derating
WxHxD (mm)
PS-15................................................. 3 W/°C (60 to 70 °C)
PS-16................................................. 6 W/°C (60 to 70 °C)
PS-17................................................. 12 W/°C (60 to 70 °C)
Note: To meet this operating temperature range, follow the guidelines in the
user guide for your industrial power supply.
PS-15................................................. 32 by 124 by 117
PS-16................................................. 60 by 124 by 117
PS-17................................................. 82 by 124 by 127
Weight
PS-15................................................. 500 g (1.1 lb)
PS-16................................................. 700 g (1.54 lb)
PS-17................................................. 1200 g (2.65 lb)
Storage Temperature
PS-15/16/17...................................... -40 to +85 °C
Ingress Protection (EN/IEC 60529)
PS-15/16/17...................................... IP 20
Input Characteristics
Input Voltage Range
Operating Humidity (IEC 60068-2-30)
PS-15/16/17...................................... 5 to 95ꢀ RH, noncondensing
Maximum Altitude ................................ 6000 m (reduce output power
or ambient temp above 2000 m)
PS-15/16 voltage.............................. 90 to 132 VAC/180 to 264 VAC
PS-17 voltage.................................... 85 to 276 VAC/88 to 375 VDC
PS-15/16/17 input frequency................ 50 to 60 Hz 6ꢀ
Power Factor
Altitude Output Derating (above 2000 m)
PS-15................................................. 7.5 W or 5 °C per 1000 m
PS-16................................................. 15 W or 5 °C per 1000 m
PS-17................................................. 30 W or 5 °C per 1000 m
Pollution Degree (EN 50178)................. 2, not conductive
PS-15................................................. 0.56 @120 VAC, 24 V, 5 A
PS-16................................................. 0.59 @120 VAC, 24 V, 10 A
PS-17................................................. 0.95 @120 VAC, 24 V, 20 A
Output Characteristics
Output Voltage Range
Shock and Vibration
Operating Vibration, Sinusoidal (IEC 60068-2-6)
PS-15/16/17...................................... 24 to 28 VDC
Output Power (-25 to +60 °C)
PS-15/16/17...................................... 2 to 17.8 Hz: 1.6 mmꢁ 17.8 to 500 Hz:
2 g, 2 hours/axis
PS-15 ................................................ 120 W
PS-16................................................. 240 W
PS-17................................................. 480 W
Output Current (-25 to +60 °C)
Operating Shock (IEC 60068-2-27)
PS-15/16/17...................................... 30 g, 6 ms, 20 g, 11 ms,
3 bumps/direction, 18 bumps total
Operating Vibration, Random (60060-2-64)
PS-17................................................. 0.5 m2(s3)ꢁ 2 hours/axis
PS-15................................................. 5 A @24 V/ 4.3 A @28 V
PS-16................................................. 10 A @24 V/ 8.6 A @28 V
PS-17................................................. 20 A @24 V/ 17 A @28 V
Ripple and Noise Voltage
Ordering Information
PS-15/16........................................... 50 mVpp
PS-17................................................. 100 mVpp
Output Capacitance
NI PS-15 .........................................................................................781093-01
NI PS-16 .........................................................................................781094-01
NI PS-17 .........................................................................................781095-01
Accessories
PS-15................................................. 1800 µF
PS-16................................................. 7000 µF
PS-17................................................. 8500 µF
Efficiency
Panel mount kit for NI PS-15/16/17...............................................199432-01
BUY NOW
PS-15................................................. 89.4ꢀ @120 VAC, 24 V, 5 A
PS-16................................................. 91.0ꢀ @120 VAC, 24 V, 10 A
PS-17................................................. 92.4ꢀ @120 VAC, 24 V, 20 A
For complete product specifications, pricing, and accessory information,
call 800 813 3693 (U.S.) or go to ni.com/compactrio.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2
Industrial Power Supplies
Approvals
Safety
18WM
LISTED
These products are designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control, and
laboratory use:
LISTED as Industrial Control Equipment (UL 508)
IND. CONT. EQ.
RECOGNIZED as Information Technology Equipment (UL 60950-1)
SELV ......................................................IEC/EN 60950-1
PELV ......................................................EN 60204-1, EN 50178, IEC 60364-4-41
Note: For UL and other safety certifications, refer to the product label or visit
ni.com/certification, search by model number or product line, and click the
appropriate link in the Certification column.
GL (Germanischer Lloyd) classified for marine and
GL
offshore applications. Environmental category: C, EMC2
Online Product Certification
Refer to the product Declaration of Conformity (DoC) for additional regulatory
compliance information. To obtain product certifications and the DoC for this
product, visit ni.com/certification, search by model number or product line,
and click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
Environmental Management
■
EN 61000-6-2, EN 61000-6-1
National Instruments is committed to designing and manufacturing products in
an environmentally responsible manner. NI recognizes that eliminating certain
hazardous substances from our products is beneficial not only to the environment
but also to NI customers.
■
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-11
VDE 0160
EN 55011 Emissionsꢁ Group 1, Class A
CE, C-Tick, ICES, and FCC Part 15 Emissionsꢁ Class A
■
■
■
For additional environmental information, refer to the NI and the Environment
Web page at ni.com/environment. This page contains the environmental
regulations and directives with which NI complies, as well as other
environmental information not included in this document.
Note: For EMC compliance, operate this product according to the documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives
as follows:
Waste Electrical and Electronic Equipment (WEEE)
■
2006/95/EC, Low-Voltage Directive (safety)
EU Customers: At the end of their life cycle, all products must be sent to a
WEEE recycling center. For more information about WEEE recycling centers and
National Instruments WEEE initiatives, visit ni.com/environment/weee.htm.
■
2004/108/EC, Electromagnetic Compatibility Directive (EMC)
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3
NI Services and Support
NI has the services and support to meet
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you access to
engineers who speak your language. NI delivers industry-leading technical
support through online knowledge bases, our applications engineers,
and access to 14,000 measurement and automation professionals within NI
Developer Exchange forums. Find immediate answers to your questions at
ni.com/support.
I
your needs around the globe and through
A
the application life cycle – from planning
and development through deployment and
SERVICE
NEEDS
ongoing maintenance. We offer services
and service levels to meet customer
requirements in research, design, validation,
and manufacturing.
P
E
V
Y
We also offer service programs that provide automatic upgrades to your
application development environment and higher levels of technical support.
Visit ni.com/ssp.
Visit ni.com/services.
Training and Certification
NI training is the fastest, most certain route to productivity with our products.
NI training can shorten your learning curve, save development time, and reduce
maintenance costs over the application life cycle. We schedule instructor-led
courses in cities worldwide, or we can hold a course at your facility. We also
offer a professional certification program that identifies individuals who have
high levels of skill and knowledge on using NI products.
Hardware Services
System Assurance Programs
NI system assurance programs are designed to make it even easier for you
to own an NI system. These programs include configuration and deployment
services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic
System Assurance Program provides a simple integration test and ensures that
your system is delivered completely assembled in one box. When you configure
your system with the NI Standard System Assurance Program, you can select
from available NI system driver sets and application development environments
to create customized, reorderable software configurations. Your system arrives
fully assembled and tested in one box with your software preinstalled. When
you order your system with the standard program, you also receive system-
specific documentation including a bill of materials, an integration test report,
a recommended maintenance plan, and frequently asked question documents.
Finally, the standard program reduces the total cost of owning an NI system
by providing three years of warranty coverage and calibration service. Use the
online product advisors at ni.com/advisor to find a system assurance program
to meet your needs.
Visit ni.com/training.
Professional Services
Our NI Professional Services team is composed of NI applications and systems
engineers and a worldwide National Instruments Alliance Partner program of
more than 600 independent consultants and integrators. Services range from
start-up assistance to turnkey system
integration. Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you want to
use our products for OEM applications. For information about special pricing and
services for OEM customers, visit ni.com/oem.
Calibration Services
NI recognizes the need to maintain properly calibrated devices for high-
accuracy measurements. We provide manual calibration procedures, services
to recalibrate your products, and automated calibration software specifically
designed for use by metrology laboratories. Visit ni.com/calibration.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair and
advance replacement services are also available. We offer extended warranties
to help you meet project life-cycle requirements. Visit ni.com/services.
■
ni.com 800 813 3693
■
National Instruments info@ni.com
©2009 National Instruments. All rights reserved. CompactRIO, FieldPoint, National Instruments, National Instruments Alliance Partner, NI, ni.com, and NI CompactDAQ are trademarks of National Instruments.
Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments
and has no agency, partnership, or joint-venture relationship with National Instruments. 2009-11329-161-101-D
相关型号：
©2020 ICPDF网 联系我们和版权申明