KB26CKW01 [NKK]
Miniature Pushbuttons; 微型按钮开关
| 型号： | KB26CKW01 |
| 厂家： | 
NIHON KAIHEIKI INDUSTRY CO. LTD. |
| 描述： | Miniature Pushbuttons |
| 文件： | 总10页 (文件大小：401K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Miniature Pushbuttons Series KB
Distinctive Characteristics
Square, rectangular, and round shaped caps.
Latchdown feature gives indication of circuit status. Audible
and tactile feedback with smooth and responsive operation.
Snap-action mechanism for long life.
Stainless steel frame on snap-in models has a specially
designed projection, which prevents rotation and
correctly orients switch in panel.
12mm body diameter.
Molded-in terminals lock out flux, dust, and other
contaminants.
8mm panel thickness capability. Rear panel bushing
or snap-in mounting.
Optional PCB adaptors in straight and right angle types.
Matching illuminated switches available and shown in the
Illuminated section.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code W): 1A @ 125/250V AC or 1A @ 30V DC
Logic Level (code G): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance: 50 milliohms maximum
Insulation Resistance: 1,000 megohms minimum @ 500V DC
Dielectric Strength: 1,000V AC minimum between contacts & 1,500 minimum between contacts & case (silver)
for 1 minute minimum;
750V AC minimum between contacts & 1,500 minimum between contacts & case (gold)
for 1 minute minimum;
Mechanical Life: 100,000 operations minimum
Electrical Life: 50,000 operations minimum for silver; 100,000 operations minimum for gold
Nominal Operating Force: Single pole 0.98 ~ 2.45N for maintained & 0.98 ~ 1.96N for momentary;
Double pole 1.47 ~ 3.43N for maintained & 1.47 ~ 2.94N for momentary
Contact Timing: Nonshorting (break-before-make)
Travel: Pretravel .087” (2.2mm); Overtravel .031” (0.80mm); Total Travel .118” (3.0mm)
Materials & Finishes
Housing: Polyamide (UL94V-0)
Movable Contactor: Silver for power circuit; copper with gold plating for logic level circuit
Stationary Contacts: Silver for power circuit; copper with gold plating for logic level circuit
Housing Base: Polyamide (UL94V-0)
Terminal Base: Polyester
Common Terminal: Phosphor bronze with silver flash plating for power circuit;
Phosphor bronze with gold flash plating for logic level circuit
End Terminals: Brass with silver flash plating for power circuit;
Brass with gold flash plating for logic level circuit
Environmental Data
Operating Temp Range: –25°C through +70°C (–13°F through +158°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in
1 minute; 3 right angled directions for 2 hours
2
Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 3 shocks in each direction)
Installation
Mounting Torque:
0.78Nm (6.9 lb•in) maximum
Cap Installation Force: 4.51N (1.0 lbf) maximum downward force on cap
Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section.
Standards & Certifications
Flammability Standards: UL94V-0 housing & housing base
UL & C-UL Recognized: Single & double pole models recognized at 1A @ 125/250V AC, 1A @ 30V DC, & 0.4A @ 28V DC;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch;
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch
R
CSA Certified: Single & double pole models recognized at 1A @ 125/250V AC, 1A @ 30V DC,
& 0.4VA @ 28V maximum; CSA File No. 023535-0-000;
add “/C” to end of part number to order CSA mark on switch.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
TYPICAL SWITCH ORDERING EXAMPLE
KB 2 5 C K W01
FF
POLES
SPDT
CAP COLORS
SHAPES
*
1
2
A
Black/None
EB
Yellow/White
Green/Green
Bushing Mounting
DPDT
BB White/White FF
CC Red/Red
S
Square
GG Blue/Blue
C
R
Round
* Black available in square and round only.
Rectangular
Note: Insert Cap with clear lens and colored
filter available;
Snap-in Mounting
K
Square
CIRCUITS
see Illuminated Pushbuttons section
M
N
Round
5
ON (ON)
Rectangular
( ) = Momentary
ON ON
6
Alternate Action
with Latchdown
CONTACTS & TERMINALS
BARRIER TYPE
HOUSING
Silver Contacts and
W01 Solder Lug Terminals
1A @ 125/250V AC
No
K
Black only
No Barrier
Code
B
With Barrier
Gold Contacts and
G01 Solder Lug Terminals
0.4VA @ 28V AC/DC
IMPORTANT:
Switches are supplied without UL,
C-UL & CSA marking unless speci-
fied. Specific models & ratings noted
on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
KB25CKW01-FF
Green Cap
Round with Bushing Mounting
Black Housing
DPDT
ON-(ON) Circuit
Silver Contacts and
Solder Lug Terminals;
Rated 1A @ 125/250V AC
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Schematics
Normal
Down
Normal
Down
Note: Terminal numbers are not actually
on the switch.
Pole
Model
2 (COM)
KB15
*KB16
ON
ON
(ON)
ON
SP
2-3
2-1
SPDT
3
1
2
(COM)
1
5
KB25
*KB26
ON
ON
(ON)
ON
DP
2-3 5-6
2-1 5-4
DPDT
3
6
4
* When in latchdown position for the alternate circuit, cap position is .055” (1.4mm) above the built-in bezel.
SHAPES & MOUNTING TYPES
Bushing Mounting
.551” (14.0mm)
Square
.551” (14.0mm)
Round
.551” x .728” (14.0mm x 18.5mm)
Rectangular
S
C
R
No barrier
With barrier
No barrier
With barrier
Bezel or barrier is an integral part of the switch body. One mounting nut AT057 supplied with each switch.
Snap-in Mounting
.551” (14.0mm)
Square
.551” (14.0mm)
Round
.551” x .728” (14.0mm x 18.5mm)
Rectangular
K
M
N
No barrier
With barrier
No barrier
With barrier
Bezel or barrier is an integral part of the switch body.
Panel Cutouts
Bushing Mounting
Snap-in Mounting
(1.2) R
.047
(1.8)
.071
Panel Thickness:
.020” ~ .315”
(0.5 ~ 8.0mm)
Panel Thickness:
.039” ~ .138”
(1.0 ~ 3.5mm)
(4.9)
.193
Without
Keyway
With
Keyway
(12.3) Dia
.484
(12.3) Dia
.484
(12.3) Dia
.484
(6.8)
.268
Panel thicknesses, when using optional accessories, are shown with the accessories at the end of this KB section.
Socket wrench AT108 may be used for bushing mounting. Overtightening the mounting nut may damage the switch housing.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
HOUSING
K
Housing available in black only. Bezel or barrier is an integral part of the switch body.
CONTACT MATERIALS, RATINGS & TERMINALS
Power Level
W
G
01
Silver Contacts
Gold Contacts
1A @ 125V AC & 250V AC
Solder Lug
(5.0)
.197
(2.0)
.079
(1.8)
.071
Logic Level
0.4VA maximum @ 28V AC/DC
(1.0)
.039
Thk = (0.2) Com = (0.1)
.008
.005
Complete explanation of operating range in Supplement section.
AT055 Crossover Guard
(12.4) Dia
.488
(14.0) Dia
.551
A partitioned plastic guard is supplied with each switch to provide insulation between terminals.
(17.0)
.669
Installation steps:
1. Identify wire-to-terminal connections.
2. Thread wires through the guard.
3. Solder the connections.
Material: Polypropylene
4. Push the guard fully onto the switch body.
BARRIER TYPE
No Code
B
No Barrier
With Barrier
Built-in barrier only available for square and rectangular
Built-in bezel
CAPS & CAP COLORS
Colors Available:
Black (Not available in
AT485
AT486
Round
AT4021
A
BB
CC
EB
FF
Rectangular)
White/White
Red/Red
Square
Rectangular
(11.6)
.457
(11.6) Sq
.457
(11.6) Dia
.457
(16.1)
.634
(4.5)
.177
(4.5)
(4.5)
.177
.177
(6.2)
.244
(6.2)
.244
(6.3)
.248
Yellow/White
Green/Green
Blue/Blue
Material: Polycarbonate
Finish: Glossy
GG
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
TYPICAL SWITCH DIMENSIONS
Square • Bushing Mount
Single & Double Pole
(5.0)
.197
(1.0) x (2.0) Typ
.039 x .079
(1.8)
.071
M12 P1
Keyway
(0.2) Typ
.008
(.127)
.005
6
5
3
2
(4.9)
.193
COM
(1.8) Typ
.071
4
1
(5.08)
.200
(1.4)
.055
(3.5)
.138
(14.2)
.559
(1.0)
.039
(1.7) Typ
.067
(11.6) Sq
.457
(14.0) Sq
.551
(5.3)
.209
(24.7)
.972
(5.0)
.197
(9.0)
.354
Latchdown Position
KB15SKW01-GG
Single pole models do not have terminals 4, 5, & 6.
Round • Bushing Mount
Single & Double Pole
(1.8)
.071
Keyway
(5.0)
.197
(1.0) x (2.0) Typ
.039 x .079
M12 P1
(.127)
.005
(0.2) Typ
.008
6
5
3
2
(4.9)
.193
COM
4
1
(1.8) Typ
.071
(5.08)
.200
(11.6) Dia
.457
(14.0) Dia
.551
(1.7) Typ
.067
(1.4)
.055
(3.5)
.138
(14.2)
.559
(1.0)
.039
(9.0)
.354
(5.3)
.209
(24.7)
.972
(5.0)
.197
Latchdown Position
KB25CKW01-GG
Single pole models do not have terminals 4, 5, & 6.
Rectangular • Bushing Mount
Single & Double Pole
(1.8)
.071
(5.0)
.197
(1.0) x (2.0) Typ
.039 x .079
Keyway
M12 P1
(0.2) Typ
.008
(.127)
.005
6
5
3
2
(4.9)
.193
(11.6)
.457
COM
(14.0)
.551
4
1
(1.8) Typ
.071
(5.08)
.200
(16.1)
.634
(1.7) Typ
.067
(1.4)
(14.2)
.559
(1.0)
.039
.055
(18.5)
.728
(9.0)
.354
(3.5)
.138
(5.3)
.209
(24.7)
.972
(5.0)
.197
Latchdown Position
KB15RKW01-GG
Single pole models do not have terminals 4, 5, & 6.
03-07
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Miniature Pushbuttons Series KB
TYPICAL SWITCH DIMENSIONS
Square • Snap-in Mount
Single & Double Pole
(1.0) x (2.0) Typ
.039 x .079
(1.8)
.071
Keyway
(0.2) Typ
.008
(.127)
.005
(4.9)
.193
6
5
3
2
COM
4
1
(2.3)
.090
(1.8) Typ
.071
(5.08)
.200
(11.6) Sq
.457
(14.0) Sq
.551
(1.4)
(1.0)
.039
(1.7) Typ
.067
.055
(5.0)
.197
(5.3)
(3.5)
.209
.138
(24.7)
.972
(9.0)
.354
Latchdown Position
KB16KKW01-CC
Single pole models do not have terminals 4, 5, & 6.
Round • Snap-in Mount
Single & Double Pole
(1.8)
.071
(1.0) x (2.0) Typ
.039 x .079
Keyway
(.127)
(0.2) Typ
.008
.005
(4.9)
.193
6
5
3
2
COM
4
1
(1.8) Typ
.071
(2.3)
.090
(5.08)
.200
(1.7) Typ
.067
(1.4)
(1.0)
.039
(11.6) Dia
.457
(14.0) Dia
.551
.055
(9.0)
.354
(3.5)
.138
(5.3)
.209
(24.7)
.972
(5.0)
.197
Latchdown Position
KB26MKW01-CC
Single pole models do not have terminals 4, 5, & 6.
Rectangular • Snap-in Mount
Single & Double Pole
(1.8)
.071
(1.0) x (2.0) Typ
.039 x .079
Keyway
(0.2) Typ
.008
(.127)
.005
6
5
3
2
(4.9)
.193
(11.6)
.457
COM
(14.0)
.551
4
1
(1.8) Typ
.071
(5.08)
.200
(1.7) Typ
.067
(16.1)
.634
(1.4)
.055
(1.0)
.039
(3.5)
.138
(5.3)
.209
(9.0)
.354
(18.5)
.728
(24.7)
.972
(5.0)
.197
Latchdown Position
KB16NKW01-CC
Single pole models do not have terminals 4, 5, & 6.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
TYPICAL SWITCH DIMENSIONS
Square • Barrier • Bushing Mount
Single & Double Pole
(5.0)
(1.0) x (2.0) Typ
.039 x .079
(1.8)
.071
M12 P1
.197
Keyway
(0.2) Typ
.008
(.127)
.005
6
5
3
2
(4.9)
.193
COM
4
1
(1.8) Typ
.071
(5.08)
.200
(5.3)
.209
(8.8)
.346
(14.2)
.559
(1.0)
.039
(11.6) Sq
.457
(14.0) Sq
.551
(1.7) Typ
.067
(24.7)
.972
(5.0)
.197
(9.0)
.354
KB15SKW01B-BB
Single pole models do not have terminals 4, 5, & 6.
Square • Barrier • Snap-in Mount
Single & Double Pole
(1.0) x (2.0) Typ
.039 x .079
(1.8)
.071
Keyway
(0.2) Typ
.008
(.127)
.005
(4.9)
.193
6
5
3
2
COM
4
1
(1.8) Typ
.071
(5.08)
.200
(5.3)
.209
(8.8)
.346
(1.0)
.039
(1.7) Typ
.067
(11.6) Sq
.457
(14.0) Sq
.551
(5.0)
.197
(24.7)
.972
(9.0)
.354
KB15KKW01B-CC
Single pole models do not have terminals 4, 5, & 6.
Rectangular • Barrier • Bushing Mount
Single & Double Pole
(5.0)
(1.0) x (2.0) Typ
.039 x .079
(1.8)
.071
M12 P1
.197
Keyway
(0.2) Typ
.008
(.127)
.005
6
5
3
2
(4.9)
.193
(11.6)
.457
COM
(14.0)
.551
4
1
(1.8) Typ
.071
(5.08)
.200
(14.2)
.559
(1.0)
.039
(1.7) Typ
.067
(5.3)
.209
(8.8)
.346
(16.1)
.634
(18.5)
.728
(24.7)
.972
(5.0)
.197
(9.0)
.354
KB15RKW01B-FF
Single pole models do not have terminals 4, 5, & 6.
Rectangular • Barrier • Snap-in Mount
Single & Double Pole
(1.0) x (2.0) Typ
.039 x .079
(1.8)
.071
Keyway
(0.2) Typ
.008
(.127)
.005
6
5
3
2
(4.9)
.193
(11.6)
.457
COM
(14.0)
.551
4
1
(1.8) Typ
.071
(5.08)
.200
(1.7) Typ
.067
(5.3)
.209
(8.8)
.346
(1.0)
.039
(16.1)
.634
(18.5)
.728
(24.7)
.972
(5.0)
.197
(9.0)
.354
KB15NKW01B-GG
Single pole models do not have terminals 4, 5, & 6.
03-07
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Miniature Pushbuttons Series KB
OPTIONAL ACCESSORIES
PCB Adaptors
AT701
AT702
AT077
Single Pole
Straight PC
Terminals
Double Pole
Straight PC
Terminals
Single Pole
Right Angle PC
Terminals
(9.8)
.386
(0.4)
.016
Switch (2.8)
Depth .110
Switch (2.8)
Depth .110
(0.3)
.012
Switch (2.8)
Depth .110
(0.3)
.012
(0.2) Typ
.008
(0.2) Typ
.008
(6.0)
Keyway
Keyway
.236
(2.54) Typ
.100
(2.54) Typ
.100
+
-
(12.0) Dia
.472
3
2
1
3
2
1
6
5
4
NC
COM
NO
6
NC
COM
NO
(11.4)
.449
+
+
-
-
(12.0) Dia
.472
(12.0) Dia
.472
5
4
3
2
1
(0.6) Typ
(0.6) Typ
.024
(0.2) Typ
.008
(2.54) Typ
.100
(0.2) Typ
.008
(2.54) Typ
.100
.024
(1.2) Typ
.047
(2.54) Typ
.100
(1.4) Typ
.055
(0.8) Typ
.031
(0.4) Typ
.016
(10.16)
.400
(10.16)
.400
(9.8)
.386
(3.1)
.122
(9.8)
.386
(3.1)
.122
(13.0)
.512
(7.62)
.300
(2.54) Typ
.100
(2.54) Typ
(2.54) Typ
1
2
3
(2.54) Typ
.100
.100
(2.54) Typ
.100
.100
3
NC
2COM
NO
6
3
NC
(7.62)
.300
5
4
2COM
NO
1
1
(0.8) Dia Typ
.031
(0.8) Dia Typ
.031
(1.8) Dia Typ
.071
(10.16)
.400
(10.16)
.400
(10.16)
.400
Material: Glass fiber reinforced polyamide
Note: Order adaptors separately.
Dust Covers
Panel Thickness Range: .020” ~ .268” (0.5 ~ 6.8mm) for Bushing Mounting; .020” ~ .079” (0.5 ~ 2.0mm) for Snap-in Mounting.
Dust Covers reduce the depth of switch behind panel by .047” (1.2mm).
AT495
For Square & Round
(not for Barrier type)
AT4025
For Rectangular
(not for Barrier type)
(1.2) R
.047
Assembled
Cap Height
(1.2) R
.047
(7.0)
.276
Assembled
Cap Height
(12.3) Dia
.484
(12.3) Dia
.484
(13.0) Sq
.512
(13.0) Sq
.512
(21.0)
.827
(5.1)
.201
(1.6)
.063
(6.5)
.256
(7.0)
.276
(6.5)
.256
(11.8)
.465
(25.4)
1.004
(11.8)
.465
(21.0) Sq
.827
Material: Lid: PVC PVC loses pliability below 0°C (32°F).
Base: Polyamide
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Miniature Pushbuttons Series KB
OPTIONAL ACCESSORIES
AT494 Protective Guard
For Square & Round (not for Barrier type)
AT4024 Protective Guard
For Rectangular (not for Barrier type)
(7.0)
.276
(1.2) R
.047
(7.0)
.276
(1.2) R
.047
Assembled
Cap Height
Assembled
Cap Height
(9.0)
.354
(9.0)
.354
(12.3) Dia
.484
(12.3) Dia
.484
(5.1)
.201
(19.0)
.748
(6.5)
.256
(11.5)
.453
(1.6)
.063
(19.0) Sq
.748
(6.5)
.256
(11.5)
.453
(23.5)
.925
Cover Material: Polycarbonate
Base Material: Polyamide
Panel Thickness Range: .020” ~ .268” (0.5 ~ 6.8mm) for Bushing Mounting; .020” ~ .091” (0.5 ~ 2.3mm) for Snap-in Mounting.
Protective Guards reduce the depth of switch behind panel by .047” (1.2mm).
ASSEMBLY INSTRUCTIONS
Cap Removal & Installation
Cap Replacement
For alternate action models cap must be in UP position for cap
removal. Indentations on opposite sides of the cap provide an
easy way to lift the cap out of the holder, using either the finger
nails, or cap extractor AT109.
Note that the cap has a pair
Cap
of round tabs and a pair of
long tabs which should be
used for correctly replacing
the cap in its holder. Using
the long tabs as guides,
Indentation
Long Tab
Round Tab
Slot
Notch
slide the cap with the long
tabs moving into the slots
on opposite sides of the cap
holder. Then, the round tabs
will snap into notches on the
other two sides of the holder.
AT109 Cap Extractor
LEGENDS
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
LM
For other legend support options, customers may either contact the factory and request the EB Legend Packet,
or utilize the general information and basic specifications presented below.
Suggested Printable Area for Lens
(10.08) (11.6)
.397 .457
ST
AR
Recommended Methods:
Laser Etch on clear lens, Screen Print
or Pad Print on lens.
T
(10.08) Sq
.397
(0.76) Typ
.030
(10.08) Dia
.397
(0.76) Typ
.030
(0.76)Typ
.030
(14.58)
.574
(0.76) Typ
.030
Epoxy based ink is recommended.
(11.6) Sq
.457
(11.6) Dia
.457
(16.1)
.634
Shaded areas are printable areas.
Additional Method: Maximum depth for engraving is .012” (0.3mm) on the cap lens.
Enamel paint is recommended to fill the engraved area.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明