LB25CKW01-A [NKK]
Standard Size Pushbuttons; 标准尺寸按键型号: | LB25CKW01-A |
厂家: | NIHON KAIHEIKI INDUSTRY CO. LTD. |
描述: | Standard Size Pushbuttons |
文件: | 总9页 (文件大小:359K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Standard Size Pushbuttons Series LB
Distinctive Characteristics
Square, round, rectangular, and round panel seal models
available.
Stainless steel clips provide secure mounting with a wide
range of panel thicknesses.
Latchdown feature gives indication of circuit status.
Audible and tactile feedback with smooth and
responsive operation.
Snap-action contact mechanism gives long electrical
life and sensitivity of actuation.
Combination solder lug and .110” quick connect
terminals are epoxy sealed to prevent entry of flux,
dust, and other contaminants.
Panel sealed model meets IP65 of IEC60529 specifications
(similar to NEMA 4 & 13).
Compact switch design minimizes behind panel depth.
Matching illuminated models available and shown in the
Illuminated Pushbutton section.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Pushbuttons Series LB
General Specifications
Electrical Capacity (Resistive Load)
Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation in Supplement section.
Other Ratings
Contact Resistance: 50 milliohms maximum for silver; 100 milliohms maximum for gold
Insulation Resistance: 200 megohms minimum @ 500V DC
Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
Mechanical Life: 1,000,000 operations minimum for momentary circuit
200,000 operations minimum for maintained circuit
Electrical Life: 100,000 operations minimum
Nominal Operating Force: 4.41N
Contact Timing: Nonshorting (break-before-make)
Travel: Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)
Pretravel .087” (2.2mm); Overtravel .031” (0.8mm); Total Travel .118” (3.0mm)
Materials & Finishes
Housing: Glass fiber reinforced polyamide (UL94V-0)
Snap-in Frame: Stainless steel
Movable Contact: Silver alloy or copper with gold plating
Stationary Contacts: Silver alloy or copper with gold plating
Base: Liquid crystal polymer (UL94V-0)
Terminals: Phosphor bronze with silver or gold plating
Environmental Data
Operating Temp Range: –25°C through +70°C (–13°F through +158°F)
Note: When used with a polyvinyl chloride splash cover, the lowest limit is 0°C (32°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in
1 minute; 3 right angled directions for 2 hours
2
Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Sealing: Not available for snap-in; see next section for panel seal.
Installation
Cap Installation Force: 3.92N maximum downward force on cap
Quick Connect Force: 52.95N maximum downward force on connector
Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section.
Standards & Certifications
Flammability Standards: UL94V-0 housing & base
UL & C-UL Recognized: All models recognized at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch;
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
R
CSA Certified: All models certified at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Snap-in Pushbuttons Series LB
TYPICAL SWITCH ORDERING EXAMPLE
LB 1
5
S
K W01
C
POLES
SHAPES
CONTACTS & TERMINALS
1
2
SPDT
DPDT
S
C
R
Square
Silver Contacts
W01 Rated 3A @ 125/250V AC
Solder Lug/Quick Connect Terminals
Round
Rectangular
Gold Contacts
G01
Rated 0.4VA @ 28V AC/DC
Solder Lug/Quick Connect Terminals
CIRCUITS
5
6
ON
( ) = Momentary
ON ON
(ON)
HOUSING
Black
CAP COLORS
Black
White
Red
Yellow
Green
Blue
K
A
B
E
F
G
H
Alternate Action
with Latchdown
Gray
G
Gray
C
Note: Insert Cap with clear lens and
colored filter available; see
Illuminated Pushbuttons section
IMPORTANT:
Switches are supplied without UL,
C-UL & CSA markings unless speci-
fied. Specific models & ratings noted
on General Specifications page.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
LB15SKW01-C
Red Cap
SPDT
ON-(ON) Circuit
Square Shape
Black Housing
Silver Contacts
Rated 3A @ 125/250V AC;
Solder Lug/Quick Connect Terminals
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Snap-in Pushbuttons Series LB
POLES & CIRCUITS
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Switch/Lamp Schematics
Normal
Down
Normal
Down
Note: Switch is marked with NC, NO, COM, L+, L–.
Pole
Model
1
COM
2
LB15
*LB16
ON
ON
(ON)
ON
SP
1-3
1-2
SPDT
DPDT
3
NC
NO
4
1
COM
COM
5
LB25
*LB26
ON
ON
(ON)
ON
DP
1-3 4-6
1-2 4-5
3
2
6
NC
NO
NC
NO
* When in latchdown position for the alternate circuit, cap position is .039” (1.0mm) above the built-in bezel.
SHAPES & PANEL CUTOUTS
.622” (15.8mm)
Square
.854” (21.7mm)
Round
.622” x .866” (15.8mm x 22.0mm)
Rectangular
S
C
R
(22.0) Dia
.866
(16.2)
.638
(11.5)
.453
(22.4)
.882
(16.2) Sq
.638
(1.5) R
.059
Cutout for 1 switch:
Cutout for 1 switch:
.638” x .638” (16.2mm x 16.2mm)
Cutout for 1 switch with barriers:
.638” x .815” (16.2mm x 20.7mm)
.638” x .882” (16.2mm x 22.4mm)
Cutout for 1 switch with barriers:
.638” x 1.059” (16.2mm x 26.9mm)
Panel Thickness for Switches & Barriers: .039” ~ .157” (1.0 ~ 4.0mm)
Panel Thickness for Protective Guards & Splash Covers: .039” ~ .138” (1.0 ~ 3.5mm)
HOUSING
K
G
Housing Colors Available:
Black
Gray
CONTACT MATERIALS, RATINGS & TERMINALS
Power Level
3A @ 125V AC & 250V AC
Solder Lug/Quick Connect
W01
Silver Contacts
Epoxy
Seal
(7.5)
.295
Logic Level
0.4VA max. @ 28V AC/DC max.
(2.0)
.079
G01
(2.8)
Gold Contacts
.110
(1.2)
.047
Thk = (0.5)
.020
Complete explanation of operating range in Supplement section.
CAPS & CAP COLORS
Color Codes:
A Black
B White
C Red
E Yellow
F Green
G Blue
H Gray
Cap Colors Available:
AT484
Square
AT4017
Round
AT4030
Rectangular
(13.2)
.520
(19.4)
.764
(19.0) Dia
.748
(3.5)
.138
(13.2) Sq
.520
(4.5)
.177
A
B
E
F
H
(5.0)
.197
(6.5)
.256
(5.5)
.217
(6.0)
.236
C
G
Material: Polycarbonate
Finish: Glossy
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Snap-in Pushbuttons Series LB
TYPICAL SWITCH DIMENSIONS
Square
Single & Double Pole
(1.8)
.071
(1.2) x (2.0) Typ
.047 x .079
(0.5) Typ
.020
(+)
L
L
NC
NO
3
2
1
6
5
4
(13.2) Sq
.520
(15.8) Sq
.622
COM
(2.54) Typ
.100
(-)
(1.0)
(2.8) Typ
.110
(5.08) Typ
.200
.039
(21.5)
.846
(7.5)
.295
(17.8) Sq
.701
(3.2)
.126
Latchdown Position
LB15SKW01-C
Single pole models do not have terminals 4, 5, & 6.
Round
Single & Double Pole
(1.2) x (2.0) Typ
.047 x .079
(1.8)
.071
(0.5) Typ
L (+)
NC
NO
3
2
1
6
5
4
.020
(15.8) Sq
.622
(21.7) Dia
.854
COM
L
(-)
(2.54) Typ
.100
(1.0)
(19.0) Dia
.748
(2.8) Typ
.110
(5.08) Typ
.200
.039
(3.2)
.126
(21.5)
.846
(7.5)
.295
(23.7) Dia
.933
Latchdown Position
LB16CKW01-C
Single pole models do not have terminals 4, 5, & 6.
Rectangular
Single & Double Pole
(1.8)
.071
(1.2) x (2.0) Typ
.047 x .079
(0.5) Typ
.020
L (+)
3
2
1
6
5
4
NC
NO
(13.2)
.520
(15.8)
.622
(17.8)
.701
COM
L (-)
(2.54) Typ
.100
(2.8) Typ
.110
(1.0)
(19.4)
.764
.039
(5.08) Typ
.200
(24.0)
.945
(7.5)
.295
(22.0)
.866
(3.2)
.126
(22.5)
.886
Latchdown Position
LB26RGW01-C
Single pole models do not have terminals 4, 5, & 6.
03-07
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Standard Size Snap-in Pushbuttons Series LB
OPTIONAL ACCESSORIES
Barriers
(23.5)
.925
AT497
End
AT498
Center
Cutouts for More Than 1 Switch
(19.2)
.756
(4.3) Typ
.169
A
(5.2)
.205
End Position
(16.2)
.638
(15.0)
.591
(20.0)
.787
Center Position
Square
A = .752” (19.1mm) x Number of Switches + .051” (1.3mm)
(1.19)
.047
(1.19)
.047
Material: Polyamide
Rectangular
(19.2)
.756
A = .996” (25.3mm) x Number of Switches + .051” (1.3mm)
Protective Guard
AT499
Square
Protective Guard
(10.0)
.394
(21.0)
.827
Opens 90°
Closes manually
Cap Height
When
Assembled
(14.0) Sq
.551
(17.0)
.669
(17.9) Sq
.705
(20.0)
.787
(8.0)
.315
Materials:
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Protective Guards reduce depth of switch behind panel by .020” (0.5mm).
Spring Loaded Protective Guard
AT4171
Square
Protective Guard
(10.5)
.413
(17.9)
.705
Opens 180°
Closes automatically
(20.5)
.807
(7.1)
.280
Cap Height
When
Assembled
(18.4)
.724
(14.2)
.559
(20.4)
.803
(7.5)
.295
(17.9)
.705
(16.2) Sq
.638
(39.0) Min*
1.535
AT4171
180°
Materials:
(10.5)
.413
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Coil Spring: Stainless Steel
(20.5)
.807
(20.4)
.803
(20.4)
.803 (N)
Recommended Panel Thickness:
.039” ~ .106” (1.0mm ~ 2.7mm)
(N) = Number of switches
* Minimum dimension allows opening of cover to 180°
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Snap-in Pushbuttons Series LB
OPTIONAL ACCESSORIES
Protective Guard
AT4057
Rectangular
Protective Guard
Opens 90°
Closes manually
(10.0)
.394
(14.0)
.551
(21.0)
.827
Cap Height
When
Assembled
(24.15)
.951
(8.0)
.315
(26.0)
1.024
Materials:
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Protective Guards reduce depth of switch behind panel by .020” (0.5mm).
Spring Loaded Protective Guard
AT4172
Rectangular
Protective Guard
Opens 180°
Closes automatically
(10.5)
.413
(17.9)
.705
(20.5)
.807
(7.1)
.280
Cap Height
When
Assembled
(24.6)
.969
(20.4)
.803
(7.5)
.295
(26.6)
1.047
(24.1)
.949
Materials:
Cover: Clear Polycarbonate
Base: Black GFR Polyamide
Coil Spring: Stainless Steel
(22.4)
.882
Recommended Panel Thickness: .039” ~ .106” (1.0mm ~ 2.7mm)
(16.2)
.638
(39.0) Min*
1.535
AT4172
180°
(10.5)
.413
(20.5)
.807
(26.6)
1.047
(26.6)
1.047 (N)
(N) = Number of switches * Minimum dimension allows opening of cover to 180°
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Snap-in Pushbuttons Series LB
OPTIONAL ACCESSORIES
Dust Covers
AT4002
Round
AT4001
Square
AT4011
Rectangular
Materials:
Lid: Polyvinyl chloride
Gasket: Polyethylene
PVC loses pliability below 0°C (32°F.
(16.5)
.650
(21.0) Dia
.827
(21.0) Dia
.827
(16.5)
.650
(24.0)
.945
Cap Height
Cap Height
(22.7)
.894
When
When
(21.8) Dia
.858
(2.5)
.098
(2.5)
.098
Assembled
Assembled
(30.2)
1.189
(24.0) Sq
.945
(30.0) Dia
1.181
(7.3)
.287
(7.3)
.287
Dust Covers reduce depth of switch behind panel by .020” (0.5mm).
PCB Adaptors
AT711
Single Pole • Straight PC Terminals
AT712
Double Pole • Straight PC Terminals
(0.3) Typ
.012
(0.3) Typ
.012
(5.08) Typ
.200
(5.08)
.200
NC
NO
NC
NO
NC
NO
NC
NO
(+)
(-)
(+)
(-)
L
L
L
L
(15.8) Sq
.622
(15.8) Sq
.622
(2.54) Typ
.100
(2.54) Typ
.100
COM
COM
COM
COM
(2.54) Typ
.100
(2.54) Typ
.100
(1.0) Dia Typ
.039
(1.0) Dia Typ
.039
(0.5)
.020
(15.0)
.591
(0.5)
.020
(15.0)
.591
(0.74) Typ
.029
(0.74) Typ
.029
(4.0)
.157
(5.08)
.200
(4.0)
.157
(5.08)
.200
Note: Order adaptors separately.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Standard Size Snap-in Pushbuttons Series LB
ASSEMBLY INSTRUCTIONS
Cut Corner
Round & Rectangular
Match clip on cap assembly with
receptacle inside switch.
C
.
Projection
C
.
N
.
C
C
.
C
A
A
V
N
V
0
5
5
2
2
1
A
A
3
3
L B - 1 5 S K
Rubber Seal
.
O
.
N
C
Projection
Notch
Square
Panel Seal
Match projection on cap assembly
with notch inside switch.
Match projection (C) on cap assembly
with groove (C) inside switch.
Panel Seal
Bushing Mount
Snap-in Mount
Snap-in clip holds all switches firmly
in place. To mount round switch,
match the antirotation projection
on switch with
Insert switch from the front of the panel
with the o-ring between the built-in
bezel and the panel. Install mounting
nut AT075 (supplied
with switch) from the
rear of the panel.
AT109
Cap Extractor
guide cut in
Bezel
panel. Snap
Projection
O-ring
into panel
cutout.
Overtightening
mounting nut may
damage the switch
housing.
Panel
AT112
Socket Wrench
Panel
Mounting Nut
LEGENDS
LM
Easily create and submit your own legends using our new on-line Legend Maker.
Visit www.nkkswitches.com
For other legend support options, customers may either contact the factory and request the LB Legend Packet,
or utilize the general information and basic specifications presented below.
Suggested Printable Area for LB Lens
(0.76) Typ
.030
AR
(11.68) (13.2)
T
.460
.520
(17.48) Dia
.688
(19.0) Dia
.748
(0.76) Typ
.030
(11.68) Sq
.460
(13.2) Sq
.520
(0.76) Typ
.030
(17.88)
.704
(0.76) Typ
.030
Recommended Methods:
Laser Etch on clear lens;
(19.4)
.764
Screen Print or Pad Print on lens.
Epoxy based ink is recommended.
Shaded areas are printable areas.
Additional Method
Additional method for legends is engraving the cap. Maximum depth for engraving is .012” (0.3mm) on the cap lens.
Enamel paint is recommended to fill the engraved area.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明