P2021NP-EG [NKK]

Internationally Approved Rockers/Paddles; 国际认可的摇椅/闸阀


型号：	P2021NP-EG
厂家：	NIHON KAIHEIKI INDUSTRY CO. LTD.
描述：	Internationally Approved Rockers/Paddles 国际认可的摇椅/闸阀
文件：	总5页 (文件大小：196K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Internationally Approved Rockers/Paddles Series P

Distinctive Characteristics

International certiﬁcations from UL, CSA, VDE, SEMKO, and SEV.

Contacts of special silver alloy resist arcing and guarantee

stable electrical contact and long life.

Stainless steel frame resists corrosion and

increases environmental safety.

High insulating barriers increase isolation of

circuits in double pole devices and provide

added protection to contact points.

Case/base of heat resistant resin meets

UL94V-0 ﬂammability standard.

Prominent external insulating barriers

increase insulation resistance and

dielectric strength.

Clinching of the frame to the case well above

the base and terminals provides 4,000V

dielectric strength.

Epoxy sealed terminals prevent entry of ﬂux, solvents,

and other contaminants.

Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Internationally Approved Rockers/Paddles Series P

General Speciﬁcations

Electrical Capacity

Resistive Load:

10A @ 125V AC or 6A @ 250V AC

Motor Load:

Lamp Load:

400W @ 125V AC

2A @ 125V AC for On-Off-On circuit & 3A @ 125V AC for other circuits

Other Ratings

Contact Resistance:

Insulation Resistance:

Dielectric Strength:

10 milliohms maximum

1,000 megohms minimum @ 500V DC

2,000V AC minimum between contacts for 1 minute minimum;

4,000V AC minimum between contacts & case for 1 minute minimum

50,000 operations minimum

Mechanical Life:

Electrical Life:

25,000 operations minimum

Angle of Throw:

25°

Materials & Finishes

Frame:

Stainless steel

Case/Base:

Diallyl phthalate resin (UL94V-0)

Silver alloy with silver plating

Pure silver with silver plating

Copper with silver plating

Movable Contacts:

Stationary Contacts:

Terminals:

Environmental Data

Operating Temp Range:

Humidity:

–10°C through +85°C (+14°F through +185°F)

90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range

& returning in 1 minute; 3 right angled directions for 2 hours

50G (490m/s²) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Shock:

Installation

Soldering Time & Temp:

Wave Soldering (Straight PC): See Proﬁle A in Supplement section.

Manual Soldering: See Proﬁle A in Supplement section.

Standards & Certifications

Flammability Standards:

UL94V-0 rated case/base

UL Recognized:

All models recognized at 10A @ 125V AC & 6A @ 250V AC; UL File No. WOYR2.E44145.

All models recognized at 10A @ 125V AC & 6A @ 250V AC; C-UL File No. WOYR8.E44145.

Single pole models certiﬁed at 10A @ 125V AC & 6A @ 250V AC; CSA File No. 023535-0-000.

C-UL Recognized:

CSA Certiﬁed:

VDE Approved:

All models approved at 10A @ 125V AC & 6A @ 250V AC; VDE License No. 119174.

Marking on switch is standard.

SEMKO Approved:

SEV Approved:

P2011Y, P2012Y, P2013Y, P2021Y, P2022Y models approved at 10A @ 125V AC &

6A @ 125/250V AC; Reference No. 9915205/01-02. Marking on switch is standard.

All models with quick connect terminals approved at 10A @ 125V AC & 6A @ 250V AC;

(P2013 only for micro-switch off); Authorization No. 02.0466. Marking on switch is standard.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Internationally Approved Rockers/Paddles Series P

TYPICAL SWITCH ORDERING EXAMPLE

P20

POLES & CIRCUITS

TERMINALS

Solder Lug

11 SPST

12 SPDT ON NONE ON

13 SPDT ON OFF ON

ON NONE OFF

Code

Straight PC

.187” (4.75mm)

Quick Connect

21 DPST ON NONE OFF

22 DPDT ON NONE ON

23 DPDT ON

OFF

PADDLE/ROCKER FRAMES

ROCKER/PADDLE CAPS

For N Frame

CAP COLORS

Frame for Small Caps

Frame for Large Caps

Black

White

Red

.365” (9.27mm) Wide Rocker

.365” (9.27mm) Wide Paddle

For Y Frame

Yellow

Green

Blue

.595” (15.11mm) Wide Rocker

.595” (15.11mm) Wide Paddle

Gray

IMPORTANT:

VDE, SEMKO & SEV are marked

on approved models. Switches

are supplied without UL, C-UL &

CSA marking unless speciﬁed.

Speciﬁc models & ratings noted

on General Speciﬁcations page.

DESCRIPTION FOR TYPICAL ORDERING EXAMPLE

P2022Y-JC

.595” (15.11mm) Wide

Red Rocker

Frame for Large Caps

Solder Lug Terminals

DPDT

ON-NONE-ON Circuit

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Internationally Approved Rockers/Paddles Series P

POLES & CIRCUITS

Rocker Position

Center

Connected Terminals

Throw & Schematics

Down

Center

Note:

Terminal numbers are

on the switch.

Pole

Model

P2011

1 (COM)

NONE

OFF

1-1b

OPEN

1-1a

SPST

1 (COM)

P2012

P2013

NONE

OFF

SPDT

DPST

(COM)

P2021

NONE

OFF

1-1b 2-2b

OPEN

(COM)

1b 2a

P2022

P2023

NONE

OFF

1-1a 2-2a DPDT

ROCKER/PADDLE FRAMES

Frame for

Small Actuator

Frame for

Large Actuator

Using AT4148 & AT4149

(3.2) Dia Typ

.126

(3.2) Dia Typ

.126

(34.9)

1.374

(34.9)

1.374

(28.5)

1.122

(6.0)

.236

(17.8)

.701

(41.3)

1.626

(41.3)

1.626

(34.9)

1.374

(34.9)

1.374

(3.5) Dia Typ

.138

(3.5) Dia Typ

.138

(10.1)

.398

(16.0)

.630

(12.8)

.504

(12.8)

.504

(13.5)

.531

Maximum Panel Thickness: .126” (3.2mm)

TERMINALS

.187” (4.75mm)

Quick Connect

No Code

Solder Lug

Epoxy Seal

(9.0)

.354

(6.35)

.250

(2.0)

.079

(4.5)

.177

(1.25)

.049

(2.6)

.102

(1.3) Dia

.051

(4.75)

.187

Thk = (0.8)

Thk = (1.0)

.031

.039

Epoxy Seal

(7.6)

.299

Straight PC

(7.62) Typ

.300

(7.62) Typ

.300

(4.8)

.189

.300

SPST

SPDT

DPST

DPDT

(1.17)

.046

Thk = (1.0)

.039

(1.8) Dia Typ

.071

(1.8) Dia Typ

.071

(10.16)

.400

(1.8) Dia Typ

.071

(10.16)

.400

(1.8) Dia Typ

.071

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Internationally Approved Rockers/Paddles Series P

ROCKER/PADDLE CAPS

For N Frame

AT4148

.365” (9.27mm) Wide Rocker

AT4149

.365” (9.27mm) Wide Paddle

(9.27)

.365

(2.13)

.084

(16.87)

.664

(13.49)

.531

(9.27)

.365

(3.96)

.156

(8.43) R

.332

(18.8)

.740

(8.8)

.346

(6.15)

.242

(7.9)

.311

(3.5)

.138

(3.5)

.138

(16.8)

.661

For Y Frame

AT4156

.595” (15.11mm) Wide Rocker

AT4157

.595” (15.11mm) Wide Paddle

(2.36)

.093

(14.33)

.564

(4.75)

.187

(26.78)

1.054

(15.11)

.595

(29.82)

1.174

(13.5) R

.531

(23.01)

.906

(11.0)

.433

(7.3)

.287

(6.6)

(10.11)

.260

.398

(3.5)

.138

(3.5)

.138

(15.11)

.595

(26.8)

1.055

Cap Colors

Available:

Black

White

Red

Yellow

Finish: Matte

Green

Blue

Gray

Material: Polyamide

TYPICAL SWITCH DIMENSIONS

(12.8)

.504

(3.2) Dia Typ

.126

(12.3)

.484

(0.6)

.024

N Frame

(1.25) x (2.0) Typ

.049 x .079

(1.0) Typ

.039

(0.8)

.031

(34.9)

1.374

(41.3)

1.626

(20.5)

.807

25°

(7.62)

.300

(0.5)

.020

(5.0)

.197

(2.6)

.102

(9.27)

.365

(13.5)

.531

(3.5)

.138

(22.0)

.866

(11.0)

.433

(9.65)

.380

P2012N-DC

P2011 & P2021 models do not have terminals 1a & 2a.

(3.2) Dia Typ

.126

(14.5)

.571

(1.25) x (2.0) Typ

.049 x .079

(0.6)

.024

(2.6) Typ

.102

Y Frame

(1.0) Typ

.039

(0.8)

.031

(34.9)

1.374

(20.5)

.807

25°

(41.3)

1.626

(7.62)

.300

(0.5)

.020

(12.8)

.504

(15.11)

.595

(3.5)

.138

(21.7)

.854

(5.0)

.197

(10.16)

.400

(20.0)

.787

(10.1)

.398

P2022Y-JC

P2011 & P2021 models do not have terminals 1a & 2a.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

相关型号：