YB15RKG03 [NKK]

Short Body Pushbuttons; 短身按钮开关


型号：	YB15RKG03
厂家：	NIHON KAIHEIKI INDUSTRY CO. LTD.
描述：	Short Body Pushbuttons 短身按钮开关开关按钮开关
文件：	总8页 (文件大小：273K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Short Body Pushbuttons Series YB

Distinctive Characteristics

Combination bezel-barrier is an integral part of the switch and

prevents accidental actuation.

Unique thermoplastic elastomer seal inside caps plus

rolled sleeve of nitrile butadiene rubber at joining

of housing and inner case, all for added protection

to interior mechanism.

Dust and oil tight as well as splashproof panel seal

models qualify to IP65 of IEC60529 Standards

(similar to NEMA 4 and 13). Panel seal models

provided with exterior o-ring.

Distinctive design of snap-action contacts for shock

resistance, long life, and sensitive actuation.

High density design to give behind panel depth of

less than one inch.

Terminals are epoxy sealed to lock out ﬂux, dust,

solvents, and other contaminants.

Latchdown for indication of circuit status, plus audible, tactile

feedback with smooth, responsive operation.

Illuminated models available and shown in the Illuminated Pushbutton section.

Matching indicators available and shown at the end of Section M.

Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

General Speciﬁcations

Electrical Capacity (Resistive Load)

Power Level (silver):

Logic Level (gold):

3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC

0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

Note: Find additional explanation of operating range in Supplement section.

Other Ratings

Contact Resistance:

Insulation Resistance:

Dielectric Strength:

50 milliohms maximum for silver; 100 milliohms maximum for gold

200 megohms minimum @ 500V DC

1,000V AC minimum between contacts for 1 minute minimum;

1,500V AC minimum between contacts & case for 1 minute minimum

1,000,000 operations minimum for momentary circuit

200,000 operations minimum for maintained circuit

100,000 operations minimum

Mechanical Life:

Electrical Life:

Nominal Operating Force:

Single pole: 1.47N for nonsealed; 1.67N for sealed

Double pole: 2.75N for nonsealed; 2.94N for sealed

Nonshorting (break-before-make)

Contact Timing:

Travel:

Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)

Materials & Finishes

Housing/Bezel:

Snap-in Frame:

Base:

Glass ﬁber reinforced polyamide (UL94V-0)

Stainless steel

Diallyl phthalate resin (UL94V-0)

Movable Contactor:

Movable Contacts:

Stationary Contacts:

Terminals:

Phosphor bronze with silver or gold plating

Silver alloy with silver plating or brass with gold plating

Silver alloy or copper with gold plating

Phosphor bronze with tin plating

Environmental Data

Operating Temp Range:

Humidity:

–25°C through +70°C (–13°F through +158°F)

90 ~ 95% humidity for 96 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Shock:

Sealing:

IP65 of IEC60529 standard for panel seal models

Installation

Mounting Torque:

0.785Nm (6.95 lb•in) maximum

Soldering Time & Temperature:

Manual Soldering: See Proﬁle A in Supplement section.

Standards & Certifications

Flammability Standards:

UL94V-0 housing & base

UL & C-UL Recognized:

All solder lug models recognized at 3A @ 125/250V AC or 0.4VA @ 28V AC/DC maximum;

UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch;

C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.

All solder lug models certiﬁed at 3A @ 125/250V AC or 0.4VA @ 28V AC/DC maximum;

CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.

CSA Certiﬁed:

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

TYPICAL SWITCH ORDERING EXAMPLE

YB 1 5

C K W 01

POLES

SHAPES

CONTACT MATERIALS

& RATINGS

SPDT

DPDT

Bushing Mounting

Silver

Square

Rated 3A @ 125V AC

Round

Gold

Rectangular

Rated 0.4VA max.

@ 28V AC/DC max.

Snap-in Mounting

Square

CIRCUITS

Round

( ) = Momentary

ON ON

(ON)

Rectangular

TERMINALS

Solder Lug/.110” (2.8mm)

Quick Connect

Alternate Action

with Latchdown

Straight PC

HOUSING

Black only

CAP COLORS

White/White

Red/White

PANEL SEAL

IMPORTANT:

Yellow/White

Green/White

Switches are supplied without UL,

C-UL, & CSA markings unless

speciﬁed. Speciﬁc models & rat-

ings noted on General Speciﬁca-

tions page.

Without Panel Seal

Code

GB Blue/White

With Panel Seal

(Bushing Mount only)

Note: Cap with clear

lens and colored

insert available;

see Illuminated

Pushbuttons section

DESCRIPTION FOR TYPICAL ORDERING EXAMPLE

YB15CKW01-FB

Cap with Green Lens

& White Insert

Round with Bushing Mounting

Black Housing

Without Panel Seal

Silver Contacts with 3 Amp Rating

SPDT ON-(ON) Circuit

Solder Lug/.110” (2.8mm)

Quick Connect Terminals

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

POLES & CIRCUITS

Plunger Position

( ) = Momentary

Connected Terminals

Throw & Schematics

Normal

Down

Normal

Down

Note: Switch is marked with NC, NO, COM, L+, L–.

Pole

Model

1 (COM)

YB15

*YB16

(ON)

1-3

1-2

SPDT

(COM)

YB25

*YB26

(ON)

1-3 4-6

1-2 4-5

DPDT

* When in latchdown position for the alternate circuit, cap position is .020” (0.5mm) above the built-in bezel.

PANEL SEAL

No Code

Without Panel Seal

With Panel Seal

Bushing

Mounting

Snap-in

Mounting

Bushing

Mounting

only

Supplied with

mounting nut

and o-ring AT089.

Supplied with

mounting nut.

SHAPES & MOUNTING TYPES

Bushing Mounting

Snap-in Mounting

Square

Round

Rectangular

Square

Round

Rectangular

Bezel-barrier is an integral part of the switch body.

HOUSING

Black

Housing available in black only. The 1-piece body and bezel-barrier have a matte ﬁnish.

CONTACT MATERIALS & RATINGS

Silver Contacts

Power Level

3A @ 125/250V AC

Logic Level

0.4VA max. @ 28V AC/DC max.

Gold Contacts

Complete explanation of operating range in Supplement section.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

TERMINALS

Solder Lug/

Epoxy Seal

.110” (2.8mm) Quick Connect

(7.3)

.288

(2.0)

.079

(2.8)

.110

(1.2)

.047

Thk = (0.5)

.020

Straight PC

(3.7) Typ

.146

(3.7) Typ

.146

(4.4)

Epoxy Seal

.173

(0.6) R

.024

(4.85) Typ

.191

(4.85) Typ

.191

(2.8)

.110

Single Pole

Double Pole

(1.2)

.047

Thk = (0.5)

.020

(3.0)

.118

(1.6) Dia Typ

.063

(1.6) Dia Typ

.063

(5.55) Typ

.219

(3.0) Typ

.118

(5.55)

.219

CAPS & COLORS

Colors Available:

(15.0) Dia

.591

AT3002

Round

White/

(12.2)

.480

White

(4.0)

.157

Red/

White

AT3001

Square

AT3003

Rectangular

Yellow/

(21.0)

.827

(15.0) Sq

.591

(15.0)

.591

White

(12.2)

.480

(12.2)

.480

Green/

(4.0)

.157

White

(4.0)

.157

Blue/

Materials:

Lens & Insert: Polycarbonate

Seal/Filter: Thermoplastic Elastomer

White

TYPICAL SWITCH DIMENSIONS

Square • Bushing Mounting

Single & Double Pole

(9.4)

(1.2) x (2.0) Typ

.047 x .079

(3.7)

.146

M15.8 P1

.370

(0.5) Typ

.020

(9.7)

.382

- +

(2.8) Typ

.110

COM

(10.9)

.429

(7.3)

.288

(6.0)

.236

(11.1)

.437

(15.0) Sq

.591

(8.3)

.327

(24.3)

.957

(18.0) Sq

.709

YB15SKW01-CB

Single pole models do not have terminals 4, 5, & 6.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

TYPICAL SWITCH DIMENSIONS

Round • Panel Seal

Single & Double Pole

(3.7)

.146

(9.4)

.370

(1.2) x (2.0) Typ

.047 x .079

M15.8 P1

(0.5)

.020

(0.5) Typ

.020

(9.7)

.382

- +

(2.8) Typ

.110

COM

(6.0)

.236

(11.1)

.437

(0.5)

(10.9)

.429

(7.3)

.288

(15.0) Dia

.591

.020

(3.0)

.118

(18.0) Dia

.709

(5.3)

.209

(24.3)

.957

Latchdown Position

YB25WCKW01-EB

Single pole models do not have terminals 4, 5, & 6.

Rectangular • Snap-in Mounting

Single & Double Pole

(3.7)

.146

(1.2) x (2.0) Typ

.047 x .079

(0.5) Typ

.020

(15.0)

.591

(18.0)

.709

(9.7)

.382

- +

(2.8) Typ

.110

COM

(7.3)

.288

(6.0)

.236

(11.1)

.437

(21.0)

.827

(8.3)

.327

(24.3)

.957

(24.0)

.945

YB15NKW01-CB

Single pole models do not have terminals 4, 5, & 6.

PANEL THICKNESS & CUTOUTS

Bushing & Panel Seal Mount

Snap-in Mount

Panel Thickness

.020” ~ .197”

(0.5mm ~ 5.0mm)

Panel Thickness

.039” ~ .138”

(1.0mm ~ 3.5mm)

(1.2) R

.047

+ 0.2

– 0.0

(16.0)

.630

Dia

(16.0)

Dia

– 0.0

.630

AT106

Socket Wrench

for Bushing Mounting

(16.0) Dia

.630

(57.5)

2.264

Note: Overtightening the

mounting nut AT092 may

damage the switch housing.

(18.0) Dia

.709

Material: Aluminum

with black alumite ﬁnish

(60.0)

2.362

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

OPTIONAL ACCESSORIES

Dust Covers and Protective Guards reduce depth of switch behind panel by .047” (1.2mm).

Panel Thickness Range with Dust Cover or Protective Guards:

Bushing Mounting

.020” ~ .150” (0.5mm ~ 3.8mm)

Snap-in Mounting

.020” ~ .091” (0.5mm ~ 2.3mm)

Panel Seal

.020” ~ .118” (0.5mm ~ 3.0mm)

Dust/Splash Cover

Splash Cover

(16.2)

.638

AT4115 Dust Cover

for Snap-in

or Bushing Mount

Dust Cover

(5.9)

.232

AT089

AT541

AT4115

(5.2)

.205

AT4115 Splash Cover

and AT541 O-ring

for Bushing Mount

(29.2)

1.150

(23.2)

.913

(16.0) Dia

.630

AT4115

Snap-in Mount

Panel Seal

Materials:

Lid: Polyvinyl Chloride

Base: Polyamide

O-ring: Nitrile butadiene rubber

(20.0) Dia

.787

Note: AT089 o-ring supplied

with panel seal model.

(0.5)

.020

AT541

Protective Guard

Assembled

Cap Height

(1.2)

.047

AT4072 Protective Guard

Opens 90°

Closes manually

(12.0)

.472

(22.9)

.902

Materials:

Lid: Polycarbonate

Base: Glass Fiber

Reinforced Polycarbonate

(1.2)

.047

(6.6)

.260

(11.2)

.441

(23.9)

.941

(16.0) Dia

.630

Spring Loaded Protective Guard

AT4175 Spring Loaded

Protective Guard

Opens 180°

Assembled

Bezel Height

Closes automatically

(12.5)

.492

(23.4)

.921

(16.0) Dia

.630

(45.0) Min*

1.772

(1.2)

.047

(23.9)

.941

(11.4)

.449

(16.0) Dia

.630

AT4175

180ϒ

(12.5)

.492

(23.4)

.921

Materials:

Lid: Polycarbonate

Base: Glass Fiber Reinforced Polyamide

Coil Spring: Stainless Steel

(23.9)

.941

(24.0) Min

.945

* Minimum dimension allows opening of cover to 180ϒ

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

Short Body Pushbuttons Series YB

LEGENDS

Easily create and submit your own legends using our new on-line Legend Maker.

Visit www.nkkswitches.com

For other legend support options, customers may either contact the factory and request the YB Legend Packet,

or utilize the general information and basic speciﬁcations presented below.

Suggested Printable Area for YB Lens

Recommended Methods: Laser Etch on clear lens; Screen Print or Pad Print on lens.

Epoxy based ink is recommended.

(13.48) (15.0)

.531 .591

(0.76) Typ

.030

(13.48) Sq

.531

(0.76) Typ

.030

(19.48)

.767

(0.76) Typ

.030

(13.48) Dia

.531

(0.76) Typ

.030

(21.0)

.827

(15.0) Dia

.591

(15.0) Sq

.591

Shaded Areas Are Printable Areas

Additional Methods

Additional methods for legends are engraving the lens and laser printing on ﬁlm inserts. Maximum depth for engraving

is .012” (0.3 mm) on the cap lens. Enamel paint is recommended to ﬁll the engraved area.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

08-08

YB15RKG03 [NKK]

相关型号：

YB15RKW01

YB15RKW01-05-BB

YB15RKW03

YB15RKW03-05-BB

YB15RWG01-05-BB

YB15SKG01

YB15SKG03

YB15SKW01

YB15SKW01-05-BB

YB15SKW01-05-JB

YB15SKW01-12-CB

YB15SKW03