LMX9402 [NSC]
Frequency Synthesizer Module; 频率合成器模块型号: | LMX9402 |
厂家: | National Semiconductor |
描述: | Frequency Synthesizer Module |
文件: | 总7页 (文件大小:156K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY
October 2000
LMX9402
Frequency Synthesizer Module
The module is available in a Ball Grid Array 560 mil X 560 mil
X 220 mil package.
General Description
The Frequency Synthesizer Module is a Low Temperature
Co-fired Ceramic (LTCC) RF module consisting of a high
performance frequency synthesizer, loop filter, and voltage
controlled oscillator (VCO). The frequency synthesizer is
fabricated using National’s ABiC BiCMOS process (fT = 14
GHz). The loop filter and VCO are fabricated on National’s
Low Temperature Co-fired Ceramics.
Features
n Low phase noise tunable local oscillator
n Low current consumption
™
n LMX2330A 2.5 GHz PLLatinum in module
The Frequency Synthesizer Module can be used for local
oscillator applications. Using a digital phase locked loop
technique, the on board frequency synthesizer can generate
a very stable, low noise local oscillator. Serial data is trans-
ferred into the module using a three wire interface. The loop
filter is designed for fast lock times and maximum attenua-
tion of reference spurs.
Applications
n DCS wireless cellular systems
n Fixed wireless communications
Functional Block Diagram
DS200075-1
Ordering Information
Package
CBGA
CBGA
CBGA
CBGA
Temp. Range -10˚C to +85˚C
Transport Media
Tape and Reels
Tape and Reels
Tape and Reels
Tape and Reels
NSC Package Drawing
SB25A
LMX9402BL1577X
LMX9402BL1501X
SB25A
LMX9402BL1619X
SB25A
LMX9402BL1701X
SB25A
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
™
™
MICROWIRE and PLLatinum are trademarks of National Semiconductor Corporation.
© 2000 National Semiconductor Corporation
DS200075
www.national.com
Connection Diagram
DS200075-2
Top View 25-Pin CBGA Package
See NS Package Number SB25A
Pin Descriptions
Pin
Pin No.
I/O
Description
Name
GND
LD
1,2,3,4,5
6
—
O
Ground.
Multiplexed output of the RF programmable dividers, reference dividers, or RF Lock
Detect. Normally used as RF Lock Detect.
7
8
GND
VCC1
—
—
—
O
Ground.
Power supply voltage input to PLL.
Ground.
9
GND
10
RFOUT
GND
VCO Frequency Output.
Ground.
11, 12
13
—
—
—
VCC2
Power supply voltage input to VCO
Ground.
14, 15,
16
GND
17
Data
GND
I
Binary serial data input. Data entered MSB first. LSB is control bit. High impedance
CMOS input.
18, 19,
20
—
Ground.
21
22
OSCIN
CLK
I
I
Reference Oscillator input.
High impedance CMOS Clock input. Data is clocked in on the rising edge, into the
various counters and registers.
23
LE
I
Load Enable input (with internal pull-up resistor). When LE Load Enable transitions
HIGH, data stored in the shift registers is loaded into the appropriate latch (control bit
dependent). Clock must be low when LE toggles high or low.
24, 25
GND
—
Ground.
www.national.com
2
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to
the device may occur. Operating Conditions indicate conditions for which the
device is intended to be functional. For guaranteed specifications and test
conditions, see the Electrical Characteristics.
Absolute Maximum Ratings (Note 1)
Power Supply Voltage (VCC
)
4.75 to 5.5 V
10˚C to 150˚C
TBD
Storage Temperature Range (TS)
ESD - Whole Body Model (Note 2)
Note 2: This device is a high performance RF integrated circuit and is ESD
sensitive. Handling and assembly of this device should be done on ESD
protected workstations.
Recommended Operating
Conditions (Note 1)
Supply Voltage (VCC
)
Min
Typ
Max
4.75 V
5.0 V
5.5 V
Operating Temperature (TA)
−10˚C to +85˚C
Frequency Synthesizer Electrical Characteristics
Note: all specifications on this table are for the BL1501 version unless noted in bold.
Value
Typ
18
Symbol
Parameter
Conditions
VCC1 and VCC2
Units
Min
Max
32
ICC
fOSC
fREF
Power Supply Current
Crystal Reference Frequency
Reference Frequency
Loop Bandwidth
mA
MHz
13
40
200
20
kHz
LBW
fVCO
fVCO
fVCO
fVCO
POUT
kHz
Tuning Frequency
1464.2
1540.2
1589
1680
0
1538.8
1614.8
1650
1740
+6
MHz
BL1577 Tuning Frequency
BL1619 Tuning Frequency
BL1701 Tuning Frequency
Output Level
MHz
MHz
MHz
3
dBm
E
E
E
E
(fm)
(fm)
(fm)
(fm)
Single Side Band Phase Noise
fm = 5 kHz
−82
−142
−82
−142
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc
fm ≥ 800 kHz
fm = 2 kHz
BL1577 Single Side Band
Phase Noise
−80
−140
−81
fm ≥ 800 kHz
fm = 2 kHz
BL1619 Single Side Band
Phase Noise
fm ≥ 800 kHz
fm = 2 kHz
−141
−81
BL1701 Single Side Band
Phase Noise
fm ≥ 800 kHz
200 kHz Offset
400 kHz Offset
600 kHz Offset
800 kHz Offset
2nd Harmonic
−141
−60
Spurious Reference Sidebands
−80
−90
−95
−96
−15
−80
dBc
−90
dBc
−95
dBc
Nth Spurious Harmonic
Spurious Non Harmonic
Frequency Lock Time (MAX)
−10
dBc
−100
500
dBc
TLOCK
Within 10˚ of Final Frequency
400
µs
TLOCK
BL1577 Frequency Lock Time
(MAX)
Within 10˚ of Final Frequency
500
500
500
µs
µs
µs
TLOCK
TLOCK
BL1619 Frequency Lock Time
(MAX)
Within 10˚ of Final Frequency
Within 10˚ of Final Frequency
BL1701 Frequency Lock Time
(MAX)
3
www.national.com
Voltage Controlled Oscillator Electrical Characteristics
Note: all specifications on this table are for the BL1501 version unless noted in bold.
Value
Typ
12
Symbol
ICC
Parameter
Conditions
Units
Min
Max
18
Power Supply Current
Tune Range
VCC2 only
mA
MHz
fVCO
fVCO
fVCO
fVCO
KV
Tune Voltage 0V to 5V
Tune Voltage 0V to 5V
Tune Voltage 0V to 5V
Tune Voltage 0V to 5V
fVCO = 1540.2 to 1614.8 MHz
1420
1480
1565
1660
1570
1640
1670
1760
BL1577 Tune Range
BL1619 Tune Range
BL1701 Tune Range
Gain
MHz
MHz
MHz
32
3
MHz/V
dBm
POUT
Output Level
0
+6
E
(fm)
Single Side Band Phase Noise
fm = 10 kHz
−102
−122
−142
−15
dBc/Hz
dBc/Hz
dBc/Hz
dBc
fm = 100 kHz
fm = 1000 kHz
2nd Harmonic
Nth Spurious Harmonic
−10
DC Electrical Characteristics
Value
Typ
Symbol
Parameter
Conditions
Units
Min
Max
VIH
VIL
High Level Input Voltage
Low Level Input Voltage
Input Current
VCC − 0.8
V
V
0.8
1.0
<
<
IIN
GND VIN VCC
−1.0
50
µA
ns
ns
ns
ns
ns
ns
tCS
Data to Clock Set Up Time
Data to Clock Hold Time
Clock Pulse Width High
Clock Pulse Width Low
Clock to Load Enable Set Up Time
Load Enable Pulse Width
tCH
tCWH
tCWL
tES
10
50
50
50
tEW
50
™
Note 3: DC Electrical Characteristics for the digital section apply to the power down pin and the MICROWIRE Interface.
www.national.com
4
Typical Application Example
DS200075-3
Evaluation Board Setup
DS200075-4
5
www.national.com
Typical Phase Noise
Typical Phase Noise (BL1501)
DS200075-5
Note: Phase noise was measured using HP3048, FM Discriminator method. Delay line approximately 95 nS.
Typical Lock Time BL1577A
DS200075-7
DS200075-8
www.national.com
6
Physical Dimensions inches (millimeters) unless otherwise noted
25-Pin CBGA Package
Order Number LMX9402SB,
NS Package Number SB25A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
Email: ap.support@nsc.com
www.national.com
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
相关型号:
LMX9820ASMX/NOPB
SPECIALTY TELECOM CIRCUIT, PBGA116, 10.10 X 14.10 MM, 2 MM HEIGHT, ROHS COMPLIANT, LGA-116
TI
©2020 ICPDF网 联系我们和版权申明