935270670118 [NXP]
CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 4.40 MM, PLASTIC, MO-153, SOT-402-1, TSSOP-14;
| 型号： | 935270670118 |
| 厂家： | 
NXP |
| 描述： | CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 4.40 MM, PLASTIC, MO-153, SOT-402-1, TSSOP-14 驱动 光电二极管 输出元件 逻辑集成电路 |
| 文件： | 总13页 (文件大小：154K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
CBT3125
Quadruple FET bus switch
Product data
2001 Dec 12
File under Integrated Circuits — ICL03
Philips
Semiconductors
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
DESCRIPTION
PIN CONFIGURATION
The CBT3125 quadruple FET bus switch features independent line
switches. Each switch is disabled when the associated Output
Enable (OE) input is HIGH.
1OE
1A
1
2
3
4
5
6
7
14 V
CC
13 4OE
12 4A
1B
FEATURES
2OE
2A
11 4B
• Standard ’125-type pinout (D, DB, and PW packages)
10 3OE
2B
9
8
3A
3B
• 5 Ω switch connection between two ports
• TTL-compatible input levels
GND
SA00562
• Latch-up testing is done to JESDEC Standard JESD78 which
exceeds 500 mA
Figure 1. SO14, SSOP14, and TSSOP14
• ESD protection exceeds 2000 V HBM per JESD22-A114,
200 V MM per JESD22-A115, and 1000 V CDM per
JESD22-C101
NC
1OE
1A
1
2
3
4
5
6
7
8
16 V
CC
15 4OE
14 4A
13 4B
12 3OE
11 3A
10 3B
1B
2OE
2A
2B
GND
9
NC
SA00563
NC = no internal connection
Figure 2. SSOP(QSOP)16
ORDERING INFORMATION
PACKAGES
14-Pin Plastic SO
TEMPERATURE RANGE
–40 to +85 °C
ORDER CODE
DRAWING NUMBER
SOT108-1
CBT3125D
CBT3125DB
CBT3125DS
CBT3125PW
14-Pin Plastic SSOP
–40 to +85 °C
SOT337-1
16-Pin Plastic SSOP(QSOP)
14-Pin Plastic TSSOP
–40 to +85 °C
SOT519-1
–40 to +85 °C
SOT402-1
Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.
2
2001 Dec 12
853-2309 27452
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
LOGIC DIAGRAM
FUNCTION TABLE (each bus switch)
INPUT
OE
FUNCTION
2
3
1A
1B
2B
3B
4B
L
A = B
1
5
1OE
2A
H
disconnect
6
8
4
9
2OE
3A
10
12
3OE
4A
11
13
4OE
SA00564
Pin numbers shown are for 14-pin package-types.
Figure 3. CBT3125 logic diagram (positive logic)
1
ABSOLUTE MAXIMUM RATINGS
Over operating free-air temperature range, unless otherwise noted.
SYMBOL
PARAMETER
CONDITIONS
MIN.
–0.5
–0.5
—
MAX.
7
UNIT
V
V
CC
supply voltage range
input voltage range
V
I
see Note 2
7
V
continuous channel current
input clamp current
128
–50
+150
mA
mA
°C
I
K
V
I/O
< 0
—
T
stg
storage temperature range
–65
NOTES:
1. Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions”
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
1
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
CONDITIONS
MIN.
4.5
2
MAX.
5.5
UNIT
V
V
CC
supply voltage
V
IH
high-level control input voltage
—
V
V
IL
low-level control input voltage
—
0.8
V
T
amb
operating ambient temperature in free-air
–40
+85
°C
NOTE:
1. All unused control inputs of the device must be held at V or GND to ensure proper device operation.
CC
3
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
DC ELECTRICAL CHARACTERISTICS
Over recommended operating free-air temperature range, unless otherwise noted.
1
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
V
= 4.5 V;
CC
V
IK
Input clamp voltage
—
—
–1.2
V
I = –18 mA
I
V
= 5.5 V;
CC
I
Input leakage current
—
—
—
—
±1
µA
µA
I
V = 5.5 V or GND
I
V
CC
= 5.5 V; I = 0;
O
CC
I
Quiescent supply current
3
CC
V = V or GND
I
V
= 5.5 V;
CC
Additional supply current per
input pin (Note 2)
one input at 3.4 V,
other inputs at V or GND
∆I
CC
control inputs
—
—
2.5
mA
CC
C
Input capacitance
control inputs V = 3 V or 0
—
—
—
1.7
3.4
3.8
—
—
—
pF
pF
V
I
I
C
Power-off leakage current
Pass gate voltage
V
V
V
= 3 V or 0; OE = V
CC
IO(OFF)
O
V
P
= 5.0 V; V = 5.0 V
I
CC
= 4.5 V; V = 0 V;
CC
I
—
—
—
5
5
7
7
Ω
Ω
Ω
I = 64 mA
I
V
CC
= 4.5 V; V = 0 V;
I
r
on
On-resistance (Note 3)
I = 30 mA
I
V
CC
= 4.5 V; V = 2.4 V;
I
10
15
I = –15 mA
I
NOTES:
1. All typical values are at V = 5 V, unless otherwise noted. T
= 25 °C.
amb
CC
2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than V or GND.
CC
3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. On-state resistance is
determined by the lower of the voltages of the two (A or B) terminals.
AC CHARACTERISTICS
T
amb
= –40 to +85 °C; C = 50 pF, unless otherwise noted.
L
V
= 5 V ± 0.5 V
CC
FROM
(INPUT)
TO
(OUTPUT)
SYMBOL
PARAMETER
UNIT
Min
Max
1
t
t
Propagation delay
A or B
OE
B or A
A or B
—
0.25
5.4
ns
ns
pd
Output enable time
to High and Low level
1.0
1
en
Output disable time
from High and Low level
t
dis
OE
A or B
4.7
ns
NOTE:
1. This parameter is warranted but not production tested. The propagation delay is based on the RC time constant of the typical on-state
resistance of the switch and a load capacitance of 50 pF, when driven by an ideal voltage source (zero output impedance).
4
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
AC WAVEFORMS
TEST CIRCUIT
V
= 1.5 V, V = GND to 3.0V
M
IN
7 V
3 V
0 V
500 Ω
S1
From Output
Under Test
Open
GND
1.5 V
1.5 V
INPUT
500 Ω
C
= 50 pF
L
t
t
PHL
PLH
Load Circuit
V
OH
1.5 V
1.5 V
TEST
S1
OUTPUT
t
open
7 V
pd
V
OL
t
/t
PLZ PZL
SA00028
t
/t
open
PHZ PZH
t
and t
are the same as t .
PLH
PHL pd
DEFINITIONS
Waveform 1. Input to Output Propagation Delays
C
=
Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
L
SA00012
3 V
t
t
and t
and t
are the same as t
.
dis
PLZ
PHZ
Output Control
1.5 V
1.5 V
are the same as t
.
PZL
PZH
en
0 V
t
t
PLZ
PZL
3.5 V
NOTES:
1. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2.5 ns,
Output
Waveform 1
S1 at 7 V
1.5 V
1.5 V
O
r
V
V
+ 0.3 V
– 0.3 V
OL
t ≤ 2.5 ns.
(see Note)
f
V
V
OL
2. The outputs are measured one at a time with one transition per
measurement.
t
t
PHZ
PZH
OH
Output
Waveform 2
S1 at Open
(see Note)
OH
0 V
Note:
Waveform 1 is for an output with internal conditions such that
the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that
the output is high except when disabled by the output control.
SA00558
t
t
and t
and t
are the same as t
.
dis
PLZ
PHZ
are the same as t
.
PZL
PZH
en
Waveform 2. Output Enable and Disable Times
5
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
6
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm
SOT337-1
7
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
SSOP16: plastic shrink small outline package; 16 leads;
body width 3.9 mm; lead pitch 0.635 mm
SOT519-1
8
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm
SOT402-1
9
2001 Dec 12
Philips Semiconductors
Product data
Quadruple FET bus switch
CBT3125
Data sheet status
Product
status
Definitions
[1]
Data sheet status
[2]
Objective data
Development
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Product data
Qualification
Production
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Koninklijke Philips Electronics N.V. 2001
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 12-01
9397 750 09218
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
it Q
Philips Semiconductors Home
ProducBuy
MySemContac
Product Information
catalogonline
Information as of 2003-04-22
My.Semiconductors.COM.
Your personal service from Use right mouse button to
Philips Semiconductors.
Please register now !
Stay informed
CBT3125;
Quadruple FET bus
switch
download datasheet
Download datasheet
Products
General description
Features
Datasheet
Applications
Support & tools
Similar products
Email/translate
Block diagram
Products & packages
Buy online
Parametrics
MultiMarket
Semiconductors
•
•
•
Product Selector
Catalog by
Function
General description
The CBT3125 quadruple FET bus switch features independent line switches. Each switch is disabled when
the associated Output Enable (OE) input is HIGH.
Catalog by
System
•
Cross-reference
Packages
•
•
Features
End of Life
information
Distributors Go
Here!
•
•
●
●
●
●
●
Standard ’125-type pinout (D, DB, and PW packages)
5 Ohm switch connection between two ports
TTL-compatible input levels
Latch-up testing is done to JESDEC Standard JESD78 which exceeds 500 mA
ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V
CDM per JESD22-C101
Models
•
•
SoC solutions
Datasheet
Type number Title
Publication
release date
Datasheet status Page
count
File
size
(kB)
Datasheet
CBT3125
Quadruple FET 12/12/2001
bus switch
Product
specification
10
96
Download
Parametrics
Type number Package
Description Operating # of
temp.(Cel) Bits
Operating
voltage(VDC)
# of Bits
per Enable
SOT108-1 (SO14)
CBT3125D
Bus Switch -40~85
4
4.5~5.5
1
SOT337-1
(SSOP14)
CBT3125DB
Bus Switch -40~85
4
4.5~5.5
1
SOT519-1
(SSOP16)
CBT3125DS
CBT3125PW
Bus Switch -40~85
Bus Switch -40~85
4
4
4.5~5.5
4.5~5.5
1
1
SOT402-1
(TSSOP14)
Products, packages, availability and ordering
Type number North
Ordering code
Marking/Packing
Package
Device status Buy
online
IC packing info
American (12NC)
type
number
SOT108-1
(SO14)
Standard Marking *
Tube
Full production
Full production
Full production
Full production
Full production
Full production
Full production
Full production
CBT3125D
9352 706 72112
-
-
-
-
-
-
-
-
Standard Marking *
9352 706 72118 Reel Pack, SMD,
13"
SOT108-1
(SO14)
SOT337-1
(SSOP14)
Standard Marking *
CBT3125DB
CBT3125DS
CBT3125PW
9352 706 71112
Tube
Standard Marking *
9352 706 71118 Reel Pack, SMD,
13"
SOT337-1
(SSOP14)
SOT519-1
(SSOP16)
Standard Marking *
9352 706 73112
Tube
Standard Marking *
9352 706 73118 Reel Pack, SMD,
13"
SOT519-1
(SSOP16)
SOT402-1
Standard Marking *
9352 706 70112
Tube
(TSSOP14)
Standard Marking *
9352 706 70118 Reel Pack, SMD,
13"
SOT402-1
(TSSOP14)
Similar products
CBT3125 links to the similar products page containing an overview of products that are similar in
function or related to the type number(s) as listed on this page. The similar products page includes products
from the same catalog tree(s), relevant selection guides and products from the same functional category.
Support & tools
Philips Bus Switch Family(date 08-Jan-03)
Email/translate this product information
●
●
Email this product information.
Translate this product information page from English to:
Translate
French
The English language is the official language used at the semiconductors.philips.com website and webpages.
All translations on this website are created through the use of Google Language Tools and are provided for
convenience purposes only. No rights can be derived from any translation on this website.
About this Web Site
| Copyright © 2003 Koninklijke Philips N.V. All rights reserved. | Privacy Policy |
| Koninklijke Philips N.V. | Access to and use of this Web Site is subject to the following Terms of Use. |
相关型号：
935270671112
IC CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 5.30 MM, PLASTIC, MO-150, SOT-337-1, SSOP-14, Bus Driver/Transceiver
NXP
935270671118
IC CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 5.30 MM, PLASTIC, MO-150, SOT-337-1, SSOP-14, Bus Driver/Transceiver
NXP
935270672112
IC CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-012, SOT-108-1, SO-14, Bus Driver/Transceiver
NXP
935270672118
IC CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-012, SOT-108-1, SO-14, Bus Driver/Transceiver
NXP
935270673112
IC CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO16, PLASTIC, SOT-519-1, QSOP-16, Bus Driver/Transceiver
NXP
935270673118
IC CBT/FST/QS/5C/B SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO16, PLASTIC, SOT-519-1, QSOP-16, Bus Driver/Transceiver
NXP
935270674112
IC 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 3.90 MM, PLASTIC, MS-012, SOT-109-1, SO-16, Parallel IO Port
NXP
935270674118
IC 8 I/O, PIA-GENERAL PURPOSE, PDSO16, 3.90 MM, PLASTIC, MS-012, SOT-109-1, SO-16, Parallel IO Port
NXP
935270692112
ALVC/VCX/A SERIES, 7 1-BIT DRIVER, TRUE OUTPUT, PDSO64, 6.10 MM, PLASTIC, MO-153, SOT-646-1, TSSOP-64
NXP
935270731118
10 1-BIT DRIVER, TRUE OUTPUT, PDSO24, 3.90 MM, 0.635 MM PITCH, PLASTIC, MO-137, SOT-556-1, QSOP-24
NXP
935270732118
10 1-BIT DRIVER, TRUE OUTPUT, PDSO24, 3.90 MM, 0.635 MM PITCH, PLASTIC, MO-137, SOT-556-1, QSOP-24
NXP
935270733118
QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 4.40 MM, PLASTIC, MO-153, SOT-402-1, TSSOP-14
NXP
©2020 ICPDF网 联系我们和版权申明