BAS16LD [NXP]
Single high-speed switching diode; 单个高速开关二极管
| 型号： | BAS16LD |
| 厂家： | 
NXP |
| 描述： | Single high-speed switching diode |
| 文件： | 总11页 (文件大小：270K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BAS16LD
Single high-speed switching diode
Rev. 1 — 12 October 2010
Product data sheet
1. Product profile
1.1 General description
Single high-speed switching diode, encapsulated in a SOD882D leadless ultra small
Surface-Mounted Device (SMD) plastic package with visible and solderable side pads.
1.2 Features and benefits
High switching speed: trr ≤ 4 ns
Low leakage current
Low capacitance
Reverse voltage: VR ≤ 100 V
Repetitive peak reverse voltage:
VRRM ≤ 100 V
Ultra small and leadless SMD plastic
package
AEC-Q101 qualified
Solderable side pads
1.3 Applications
High-speed switching
General-purpose switching
1.4 Quick reference data
Table 1.
Quick reference data
Parameter
Symbol
Conditions
Min
Typ
Max
215
0.5
100
4
Unit
mA
μA
V
[1]
[2]
IF
forward current
-
-
-
-
-
-
-
-
IR
VR
trr
reverse current
VR = 80 V
reverse voltage
reverse recovery time
ns
[1] Device mounted on an FR4 Printed-Circuit Board (PCB) with 60 μm copper strip line.
[2] When switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA.
BAS16LD
NXP Semiconductors
Single high-speed switching diode
2. Pinning information
Table 2.
Pinning
Pin
1
Description
cathode
Simplified outline
Graphic symbol
[1]
2
anode
2
1
1
2
006aab040
Transparent
top view
[1] The marking bar indicates the cathode.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
-
Description
Version
BAS16LD
leadless ultra small plastic package; 2 terminals;
SOD882D
body 1.0 × 0.6 × 0.4 mm
4. Marking
Table 4.
Marking codes
Type number
Marking code[1]
BAS16LD
1000
0000
[1] For SOD882D binary marking code description, see Figure 1.
4.1 Binary marking code description
CATHODE BAR
READING DIRECTION
VENDOR CODE
READING EXAMPLE:
0111
1011
MARKING CODE
(EXAMPLE)
READING DIRECTION
006aac477
Fig 1. SOD882D binary marking code description
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
2 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
VRRM
repetitive peak reverse
voltage
-
100
V
VR
IF
reverse voltage
forward current
-
-
100
215
500
V
[1]
[2]
mA
mA
IFRM
repetitive peak forward
current
tp ≤ 0.5 μs;
δ ≤ 0.25
IFSM
non-repetitive peak forward square wave
current
tp = 1 μs
-
4
A
tp = 1 ms
tp = 1 s
-
1
A
-
0.5
250
150
+150
+150
A
[1][3]
Ptot
Tj
total power dissipation
junction temperature
ambient temperature
storage temperature
Tamb ≤ 25 °C
-
mW
°C
°C
°C
-
Tamb
Tstg
−55
−65
[1] Device mounted on an FR4 PCB with 60 μm copper strip line.
[2] Tj = 25 °C prior to surge.
[3] Reflow soldering is the only recommended soldering method.
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max Unit
500 K/W
[1][2]
Rth(j-a)
thermal resistance from
junction to ambient
in free air
-
-
[1] Device mounted on an FR4 PCB with 60 μm copper strip line.
[2] Reflow soldering is the only recommended soldering method.
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
3 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
7. Characteristics
Table 7.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter
VF forward voltage
Conditions
Min
Typ
Max Unit
[1]
IF = 1 mA
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
715
855
1
mV
mV
V
IF = 10 mA
IF = 50 mA
IF = 150 mA
1.25
30
V
IR
reverse current
VR = 25 V
nA
μA
μA
μA
pF
ns
V
VR = 80 V
0.5
30
VR = 25 V; Tj = 150 °C
VR = 80 V; Tj = 150 °C
f = 1 MHz; VR = 0 V
50
Cd
trr
diode capacitance
1.5
4
[2]
[3]
reverse recovery time
forward recovery voltage
VFR
1.75
[1] Pulse test: tp ≤ 300 μs; δ ≤ 0.02.
[2] When switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA.
[3] When switched from IF = 10 mA; tr = 20 ns.
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
4 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
mbg704
006aab132
2
3
10
10
I
F
I
FSM
(A)
(mA)
2
10
10
10
1
(1) (2) (3) (4)
1
−1
−1
10
10
2
3
4
1
10
10
10
10
0
0.2
0.4
0.6
0.8
1.0
1.2
V
1.4
(V)
t
p
(μs)
F
(1) Tamb = 150 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = −40 °C
Based on square wave currents.
Tj = 25 °C; prior to surge
Fig 2. Forward current as a function of forward
voltage; typical values
Fig 3. Non-repetitive peak forward current as a
function of pulse duration; maximum values
mbg446
006aab133
2
10
0.8
I
R
(1)
(2)
C
(pF
d
(μA)
10
)
0.6
1
−1
10
10
10
10
10
0.4
(3)
(4)
−2
−3
−4
−5
0.2
0
0
4
8
12
16
0
20
40
60
80
100
V
R
(V)
V
R
(V)
(1) Tamb = 150 °C
(2) Tamb = 85 °C
(3) Tamb = 25 °C
(4) Tamb = −40 °C
f = 1 MHz; Tamb = 25 °C
Fig 4. Reverse current as a function of reverse
voltage; typical values
Fig 5. Diode capacitance as a function of reverse
voltage; typical values
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
5 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
8. Test information
t
r
t
p
t
D.U.T.
10 %
I
F
+ I
F
t
rr
R
S
= 50 Ω
SAMPLING
OSCILLOSCOPE
t
R
= 50 Ω
V = V + I × R
S
i
R
F
(1)
90 %
V
R
mga881
input signal
output signal
(1) IR = 1 mA
Input signal: reverse pulse rise time tr = 0.6 ns; reverse voltage pulse duration tp = 100 ns; duty cycle δ = 0.05
Oscilloscope: rise time tr = 0.35 ns
Fig 6. Reverse recovery time test circuit and waveforms
I
1 kΩ
450 Ω
I
V
90 %
R
S
= 50 Ω
OSCILLOSCOPE
= 50 Ω
V
FR
D.U.T.
R
i
10 %
t
t
t
r
t
p
input signal
output signal
mga882
Input signal: forward pulse rise time tr = 20 ns; forward current pulse duration tp ≥ 100 ns; duty cycle δ ≤ 0.005
Fig 7. Forward recovery voltage test circuit and waveforms
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
6 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
9. Package outline
0.65
0.55
0.4
max
2
0.30
0.22
1.05
0.95
0.65
1
0.30
0.22
0.55
0.45
cathode marking on top side
Dimensions in mm
10-08-06
Fig 8. Package outline BAS16LD (SOD882D)
10. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number Package Description
Packing quantity
10000
BAS16LD
SOD882D 2 mm pitch, 8 mm tape and reel
-315
[1] For further information and the availability of packing methods, see Section 14.
11. Soldering
1.4
0.2
solder lands
solder resist
solder paste
0.8
(2×)
0.6 0.7
(2×) (2×)
Dimensions in mm
0.3
0.4
1
1.3
sod882d_fr
Reflow soldering is the only recommended soldering method.
Fig 9. Reflow soldering footprint BAS16LD (SOD882D)
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
7 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
12. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAS16LD v.1
20101012
Product data sheet
-
-
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
8 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
13.2 Definitions
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
13.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
9 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
BAS16LD
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 — 12 October 2010
10 of 11
BAS16LD
NXP Semiconductors
Single high-speed switching diode
15. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Binary marking code description. . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Test information. . . . . . . . . . . . . . . . . . . . . . . . . 6
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7
Packing information . . . . . . . . . . . . . . . . . . . . . 7
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
3
4
4.1
5
6
7
8
9
10
11
12
13
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
13.1
13.2
13.3
13.4
14
15
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 12 October 2010
Document identifier: BAS16LD
相关型号：
©2020 ICPDF网 联系我们和版权申明