BCV48/T1 [NXP]
TRANSISTOR 500 mA, 60 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-243AA, PLASTIC, SC-62, 3 PIN, BIP General Purpose Small Signal;
| 型号： | BCV48/T1 |
| 厂家： | 
NXP |
| 描述： | TRANSISTOR 500 mA, 60 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-243AA, PLASTIC, SC-62, 3 PIN, BIP General Purpose Small Signal 放大器 晶体管 |
| 文件： | 总8页 (文件大小：53K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
BCV28; BCV48
PNP Darlington transistors
Product specification
2004 Dec 06
Supersedes data of 1999 Apr 08
Philips Semiconductors
Product specification
PNP Darlington transistors
BCV28; BCV48
FEATURES
PINNING
PIN
• Very high DC current gain (min. 10000)
• High current (max. 500 mA)
• Low voltage (max. 60 V).
DESCRIPTION
1
2
3
emitter
collector
base
APPLICATIONS
• Where very high amplification is required.
3
2
DESCRIPTION
PNP Darlington transistor in a SOT89 plastic package.
NPN complements: BCV29 and BCV49.
TR1
TR2
MARKING
1
3
2
1
sym088
TYPE NUMBER
BCV28
MARKING CODE
ED
EE
Fig.1 Simplified outline (SOT89) and symbol.
BCV48
ORDERING INFORMATION
PACKAGE
DESCRIPTION
TYPE NUMBER
NAME
SC-62
VERSION
BCV28
BCV48
plastic surface mounted package; collector pad for good heat
transfer; 3 leads
SOT89
2004 Dec 06
2
Philips Semiconductors
Product specification
PNP Darlington transistors
BCV28; BCV48
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
PARAMETER
collector-base voltage
CONDITIONS
open emitter
MIN.
MAX.
UNIT
VCBO
BCV28
−
−
−40
V
V
BCV48
−80
VCES
collector-emitter voltage
BCV28
VBE = 0 V
−
−
−
−
−
−
−
−30
V
V
V
BCV48
−60
VEBO
IC
ICM
IB
emitter-base voltage
collector current (DC)
peak collector current
base current (DC)
total power dissipation
storage temperature
junction temperature
ambient temperature
open collector
−10
−500
−800
−100
1.3
mA
mA
mA
W
Ptot
Tstg
Tj
Tamb ≤ 25 °C; note 1
−65
−
+150
150
°C
°C
Tamb
−65
+150
°C
Note
1. Device mounted on a printed-circuit board, single-sided copper, tin-plated, mounting pad for collector 6 cm2.
For other mounting conditions, see “Thermal considerations for SOT89 in the General Part of associated Handbook”.
THERMAL CHARACTERISTICS
SYMBOL
Rth(j-a)
PARAMETER
CONDITIONS
note 1
VALUE
UNIT
thermal resistance from junction to ambient
96
16
K/W
K/W
Rth(j-s)
thermal resistance from junction to soldering point
Note
1. Device mounted on a printed-circuit board, single-sided copper, tin-plated, mounting pad for collector 6 cm2.
For other mounting conditions, see “Thermal considerations for SOT89 in the General Part of associated Handbook”.
2004 Dec 06
3
Philips Semiconductors
Product specification
PNP Darlington transistors
BCV28; BCV48
CHARACTERISTICS
Tamb = 25 °C unless otherwise specified.
SYMBOL
ICBO
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
collector-base cut-off current
BCV28
IE = 0 A; VCB = −30 V
−
−
−
−
−
−
−100 nA
−100 nA
−100 nA
BCV48
IE = 0 A; VCB = −60 V
IEBO
hFE
emitter-base cut-off current
DC current gain
BCV28
IC = 0 A; VBE = −10 V
IC = −1 mA; VCE = −5 V; see Fig.2
4000
2000
−
−
−
−
BCV48
DC current gain
BCV28
IC = −10 mA; VCE = −5 V; see Fig.2
IC = −100 mA; VCE = −5 V; see Fig.2
IC = −500 mA; VCE = −5 V; see Fig.2
IC = −100 mA; IB = −0.1 mA
10000 −
4000
−
−
BCV48
−
DC current gain
BCV28
20000 −
10000 −
−
−
BCV48
DC current gain
BCV28
4000
2000
−
−
−
−
−
−
BCV48
VCEsat
collector-emitter saturation
voltage
−1
V
VBEsat
VBEon
fT
base-emitter saturation voltage
base-emitter on-state voltage
transition frequency
IC = −100 mA; IB = −0.1 mA
IC = −10 mA; IB = −5 mA
−
−
−
−
−1.5
−1.4
−
V
−
V
IC = −30 mA; VCE = −5 V;
220
MHz
f = 100 MHz
2004 Dec 06
4
Philips Semiconductors
Product specification
PNP Darlington transistors
BCV28; BCV48
MGD836
100000
h
FE
80000
60000
40000
20000
0
2
3
−1
−10
−10
−10
I
(mA)
C
VCE = −5 V.
Fig.2 DC current gain; typical values.
2004 Dec 06
5
Philips Semiconductors
Product specification
PNP Darlington transistors
BCV28; BCV48
PACKAGE OUTLINE
Plastic surface mounted package; collector pad for good heat transfer; 3 leads
SOT89
B
A
D
b
p3
E
H
E
L
p
1
2
3
c
b
p2
w
M
b
p1
e
1
e
0
2
4 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
b
b
b
c
D
E
e
e
H
E
L
p
w
p1
p2
p3
1
1.6
1.4
0.48
0.35
0.53
0.40
1.8
1.4
0.44
0.23
4.6
4.4
2.6
2.4
4.25
3.75
1.2
0.8
mm
3.0
1.5
0.13
REFERENCES
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEDEC
JEITA
99-09-13
04-08-03
SOT89
TO-243
SC-62
2004 Dec 06
6
Philips Semiconductors
Product specification
PNP Darlington transistors
BCV28; BCV48
DATA SHEET STATUS
DATA SHEET
STATUS(1)
PRODUCT
STATUS(2)(3)
LEVEL
DEFINITION
I
Objective data
Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
Application information
Applications that are
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2004 Dec 06
7
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
© Koninklijke Philips Electronics N.V. 2004
SCA76
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R75/05/pp8
Date of release: 2004 Dec 06
Document order number: 9397 750 13862
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明