BGO807,112 [NXP]
BGO807 - 870 MHz optical receivers;
| 型号： | BGO807,112 |
| 厂家： | 
NXP |
| 描述： | BGO807 - 870 MHz optical receivers 放大器 PC 光纤 |
| 文件： | 总11页 (文件大小：122K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BGO807; BGO807/FC0;
BGO807/SC0
870 MHz optical receivers
Rev. 2 — 29 September 2010
Product data sheet
1. Product profile
1.1 General description
High dynamic range optical receiver amplifier modules in a standard SOT115 package
where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC
connector.
The amplifier supply voltage pin and the photo diode bias voltage pin both connect to
24 V (DC).
The modules have a mono mode optical input suitable for 1290 nm to 1600 nm
wavelengths, a terminal to monitor the photo diode current and an electrical output having
a characteristic impedance of 75 .
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features and benefits
Excellent linearity
Low noise
Excellent flatness
Standard CATV outline
Rugged construction
Gold metallization ensures excellent reliability
High optical input power range.
1.3 Applications
CATV optical node systems operating in the 40 MHz to 870 MHz frequency range.
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
1.4 Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min Typ Max Unit
f
frequency range
40
11
45
-
-
-
-
-
-
-
870 MHz
s22
output return losses
f = 40 MHz to 870 MHz
-
-
dB
dB
optical input return losses
second order distortion
equivalent noise input
d2
F
f = 854.5 MHz
55 dB
f = 40 MHz to 870 MHz
-
8.5
pA/Hz
Itot
total current consumption VB = 24 V
(DC)
175
205 mA
2. Pinning information
Table 2.
Pin
Pinning
Description
Simplified outline
Graphic symbol
BGO807 (SOT115T)
1
monitor current
4
5
2, 3
4
common
1
5 7 9
5 7 9
5 7 9
+VB of the photodiode
+VB of the amplifier
common
9
5
7, 8
9
1
4
2, 3, 7, 8
sym098
output
BGO807/FC0 (SOT115X)
1
monitor current
5
2, 3
4
common
1
+VB of the photodiode
+VB of the amplifier
common
9
5
7, 8
9
1
4
2, 3, 7, 8
sym098
output
BGO807/SC0 (SOT115Y)
1
monitor current
5
2, 3
4
common
1
+VB of the photodiode
+VB of the amplifier
common
9
5
7, 8
9
1
2, 3, 7, 8
sym098
output
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
2 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
3. Ordering information
Table 3.
Ordering information
Type number Package
Name
Description
Version
BGO807
-
-
-
rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 SOT115T
6-32 UNC and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line
leads
BGO807/FC0
BGO807/SC0
rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 SOT115X
6-32 UNC and 2 extra horizontal mounting holes; optical input with connector;
8 gold-plated in-line leads
rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 SOT115Y
6-32 UNC and 2 extra horizontal mounting holes; optical input with connector;
8 gold-plated in-line leads
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
40
Max
870
+85
+85
Unit
MHz
C
f
frequency range
storage temperature
Tstg
Tmb
40
20
operating mounting base
temperature
C
Pin
optical input power
ESD sensitivity
continuous
-
5
-
mW
V
ESD
human body model;
500
R = 1.5 k; C = 100 pF
5. Characteristics
Table 5.
Characteristics
In accordance with the Absolute Maximum Rating System (IEC 60134); bandwidth 40 MHz to 870 MHz; VB = 24 V;
Tmb = 30 C; ZL = 75 .
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
S
responsivity
BGO807
= 1300 nm
800
750
-
-
-
-
-
V/W
V/W
dB
BGO807/FC0; BGO807/SC0
= 1300 nm
-
FL
flatness straight line (peak to
valley)
f = 40 MHz to 870 MHz
1
SL
s22
slope straight line
f = 40 MHz to 870 MHz
f = 40 MHz to 870 MHz
0
11
45
-
-
-
-
-
-
-
-
2
dB
dB
dB
dB
dB
dB
dB
output return losses
optical input return losses
second order distortion
-
-
[1][2]
[1][3]
[1][4]
[5][6]
d2
d3
fm = 446.5 MHz
fm = 746.5 MHz
fm = 854.5 MHz
fm = 853.25 MHz
66
61
55
71
-
-
third order distortion
-
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
3 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
Table 5.
Characteristics …continued
In accordance with the Absolute Maximum Rating System (IEC 60134); bandwidth 40 MHz to 870 MHz; VB = 24 V;
Tmb = 30 C; ZL = 75 .
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
F
equivalent noise input
f = 40 MHz to 450 MHz
f = 450 MHz to 750 MHz
f = 750 MHz to 870 MHz
= 1310 20 nm
-
-
-
-
-
-
-
7
pA/Hz
pA/Hz
pA/Hz
A/W
-
8
-
8.5
s
spectral sensitivity
optical wavelength
0.85
0.9
1290
-
= 1550 20 nm
-
A/W
1600
nm
L
length of optical fiber; SM type;
9/125 m
BGO807
1
-
-
-
-
-
m
BGO807/FC0; BGO807/SC0
total current consumption (DC)
diode bias current at pin 4 (DC)
746
175
-
861
205
25
mm
mA
mA
Itot
Ibias
[1] Two laser test; each laser with a modulation index of 40%; Popt = 1 mW (total).
[2] m = 446.5 MHz; fp = 97.25 MHz; fq = 349.25 MHz.
f
[3] fm = 746.5 MHz; fp = 133.25 MHz; fq = 613.25 MHz.
[4] fm = 854.5 MHz; fp = 133.25 MHz; fq = 721.25 MHz.
[5] Three laser test; each laser with a modulation index of 60%; Popt = 1 mW (total).
[6] fm = 853.25 MHz; fp = 133.25 MHz; fq = 265.25 MHz; fr = 721.25 MHz.
photo
current
10 kΩ
Pin 1
1 kΩ
mlb151
Fig 1. Monitor current pin.
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
4 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
6. Package outline
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;
SOT115T
2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line leads
N
D
N
E
1
S
N
Z
p
2
2
M
M
M
1
2
A
2
1
2
3
4
5
7
8
9
A
S
1
L
F
S
W
e
b
M
w
c
e
1
d
q
y
M
B
2
U
Q
B
2
q
x
M
B
1
y
M
B
p
U
q
1
Z
max.
w
x
y
S
S
U
U
2
W
1
2
1
0
5
10 mm
16.7 4.95 44.75 8.2 6-32
16.1 4.55 44.25 7.8 UNC
scale
0.25 0.7 0.1 12
optical input
DIMENSIONS (mm are the original dimensions)
A
A
max.
D
d
E
L
min.
Q
max.
N
min.
2
UNIT
e
e
p
q
b
c
F
M
M
M
N
N
q
q
2
S
1
1
2
1
2
1
max. max. max.
max.
0.51
0.38
10.7
0.0
5
0
4.15
3.85
mm 20.8 9.5
0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8
1000
2.4 38.1 25.4 10.2 4.2
2.5 1.6 0.9
REFERENCES
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEDEC
JEITA
04-02-04
10-06-18
SOT115T
Fig 2. Package outline SOT115T.
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
5 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
Rectangular single-ended package; aluminium flange;
2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes;
optical input with connector; 8 gold-plated in-line leads
SOT115X
N
E
D
1
S
Z
p
N
2
2
M
M
M
1
2
A
2
1
2
3
4
5
7
8
9
A
S
1
L
F
S
c
W
e
b
M
w
d
e
1
U
Q
2
B
q
y
M
B
2
q
x
M
B
y
M
B
1
p
N
R
U
q
1
0
25 mm
Scale
connector
Z
max.
0
5
10 mm
S
S
2
S
1
W
w
x
y
U
U
2
1
scale
16.7 4.95 44.75 8.2
16.1 4.55 44.25 7.8
6-32
UNC
4.2
0.25 0.7 0.1 12
DIMENSIONS (mm are the original dimensions)
A
A
max.
D
d
E
L
min.
Q
max.
R
min.
2
UNIT
e
e
1
p
q
b
c
F
M
M
M
2
q
q
2
N
N
2
N
1
1
1
max. max. max.
max.
0.51
0.38
861 10.7
746 0.0
5
0
4.15
3.85
0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8
2.5 1.6 0.9
2.4 38.1 25.4 10.2 35
mm 20.8 9.5
REFERENCES
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEDEC
JEITA
04-02-04
10-06-18
SOT115X
Fig 3. Package outline SOT115X.
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
6 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
Rectangular single-ended package; aluminium flange;
2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes;
optical input with connector; 8 gold-plated in-line leads
SOT115Y
N
E
D
1
S
Z
p
N
2
2
M
M
M
1
2
A
2
1
2
3
4
5
7
8
9
A
S
1
L
F
S
c
W
e
b
M
w
d
e
1
U
Q
2
B
q
y
M
B
2
q
x
M
B
y
M
B
1
p
N
R
U
q
1
0
25 mm
Scale
connector
Z
max.
0
5
10 mm
S
S
1
S
2
W
w
x
y
U
U
2
1
scale
16.7 4.95 44.75 8.2 6-32
16.1 4.55 44.25 7.8 UNC
4.2
0.25 0.7 0.1 12
DIMENSIONS (mm are the original dimensions)
A
A
max.
D
d
E
L
min.
Q
p
R
min.
2
UNIT
e
e
q
b
c
F
q
q
2
M
M
M
N
N
N
2
1
1
1
2
1
max. max. max.
max.
max.
0.51
0.38
861 10.7
746 0.0
5
0
4.15
3.85
0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8
2.5 1.6 0.9
2.4 38.1 25.4 10.2 35
mm 20.8 9.5
REFERENCES
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
JEDEC
JEITA
04-02-05
10-06-18
SOT115Y
Fig 4. Package outline SOT115Y.
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
7 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
7. Handling information
Fiberglass optical coupling: maximum tensile strength = 5 N; minimum bending
radius = 35 mm.
8. Revision history
Table 6.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BGO807_FC0_SC0 v.2
Modifications:
20100929
Product data sheet
-
BGO807_FC0_SC0 v.1
• The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
• Legal texts have been adapted to the new company name where appropriate.
• Pinning information: presentation was modified, graphic symbols were added.
• Package outline and simplified outline drawings have been updated to the latest version.
BGO807_FC0_SC0 v.1
(9397 750 13192)
20040707
Product data sheet
-
-
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
8 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
9. Legal information
9.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
9.2
Definitions
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
9.3
Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
9 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
9.4
Trademarks
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
BGO807_FC0_SC0
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 29 September 2010
10 of 11
BGO807/BGO807/FC0/SC0
NXP Semiconductors
870 MHz optical receivers
11. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits. . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 2
2
3
4
5
6
7
8
Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5
Handling information. . . . . . . . . . . . . . . . . . . . . 8
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8
9
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9.1
9.2
9.3
9.4
10
11
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 29 September 2010
Document identifier: BGO807_FC0_SC0
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明