BUK663R5-55C [NXP]
N-channel TrenchMOS FET; N沟道FET的TrenchMOS
| 型号： | BUK663R5-55C |
| 厂家： | 
NXP |
| 描述： | N-channel TrenchMOS FET |
| 文件： | 总11页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BUK663R5-55C
N-channel TrenchMOS FET
Rev. 01 — 3 August 2010
Objective data sheet
1. Product profile
1.1 General description
Intermediate level gate drive N-channel enhancement mode Field-Effect Transistor (FET)
in a plastic package using advanced TrenchMOS technology. This product has been
designed and qualified to the appropriate AEC Q101 standard for use in high performance
automotive applications.
1.2 Features and benefits
AEC Q101 compliant
Suitable for thermally demanding
environments due to 175 °C rating
Suitable for intermediate level gate
drive sources
1.3 Applications
12 V and 24 V Automotive systems
ABS/ESP
Motors, lamps and solenoid control
Transmission control
Engine management
HVAC
Ultra high performance power
switching
1.4 Quick reference data
Table 1.
Symbol
VDS
Quick reference data
Parameter
Conditions
Min Typ Max Unit
drain-source voltage
drain current
Tj ≥ 25 °C; Tj ≤ 175 °C
-
-
-
-
55
V
A
[1]
ID
VGS = 10 V; Tmb = 25 °C;
see Figure 1
100
Ptot
total power dissipation Tmb = 25 °C; see Figure 2
-
-
-
263
3.5
W
Static characteristics
RDSon drain-source on-state VGS = 10 V; ID = 15 A;
2.7
mΩ
resistance
Tj = 25 °C; see Figure 5
Avalanche ruggedness
EDS(AL)S
non-repetitive
drain-source
ID = 100 A; Vsup ≤ 55 V;
RGS = 50 Ω; VGS = 10 V;
-
-
551 mJ
avalanche energy
Tj(init) = 25 °C; unclamped
[1] Continuous current is limited by package.
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
2. Pinning information
Table 2.
Pinning information
Symbol Description
Pin
1
Simplified outline
Graphic symbol
G
D
S
D
gate
mb
D
S
2
Drain
source
3
G
mb
mounting base; connected to
drain
mbb076
2
1
3
SOT404 (D2PAK)
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
BUK663R5-55C
D2PAK
plastic single-ended surface-mounted package (D2PAK); 3 leads SOT404
(one lead cropped)
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
2 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VDS
Parameter
Conditions
Min
Max
55
Unit
V
drain-source voltage
gate-source voltage
drain current
Tj ≥ 25 °C; Tj ≤ 175 °C
-
VGS
-20
20
V
[1]
[1]
ID
Tmb = 25 °C; VGS = 10 V; see Figure 1
Tmb = 100 °C; VGS = 10 V; see Figure 1
Tmb = 25 °C; tp ≤ 10 µs; pulsed
Tmb = 25 °C; see Figure 2
-
100
100
757
263
175
175
A
-
A
IDM
Ptot
Tstg
Tj
peak drain current
-
A
total power dissipation
storage temperature
junction temperature
-
W
°C
°C
-55
-55
Source-drain diode
[1]
IS
source current
peak source current
Tmb = 25 °C
-
-
100
757
A
A
ISM
tp ≤ 10 µs; pulsed; Tmb = 25 °C
Avalanche ruggedness
EDS(AL)S non-repetitive drain-source
ID = 100 A; Vsup ≤ 55 V; RGS = 50 Ω;
VGS = 10 V; Tj(init) = 25 °C; unclamped
-
-
551
-
mJ
J
avalanche energy
[2][3][4]
EDS(AL)R
repetitive drain-source
avalanche energy
[1] Continuous current is limited by package.
[2] Single-pulse avalanche rating limited by maximum junction temperature of 175 °C.
[3] Repetitive avalanche rating limited by an average junction temperature of 170 °C.
[4] Refer to application note AN10273 for further information.
03na19
003aac796
120
200
I
D
(A)
160
P
(%)
der
80
(1)
120
80
40
0
40
0
0
50
100
150
200
0
50
100
150
200
T
mb
(°C)
T
mb
(°C)
Fig 1. Continuous drain current as a function of
mounting base temperature
Fig 2. Normalized total power dissipation as a
function of mounting base temperature
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
3 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
5. Thermal characteristics
Table 5.
Symbol
Rth(j-mb)
Thermal characteristics
Parameter
Conditions
Min
Typ
Max
Unit
thermal resistance from junction to
mounting base
see Figure 3
-
-
0.57
K/W
Rth(j-a)
thermal resistance from junction to
ambient
vertical in free air
-
60
-
K/W
003aac792
1
Zth (j-mb)
(K/W)
0.5
0.2
0.1
10-1
10-2
10-3
0.05
0.02
tp
δ =
P
T
single shot
t
tp
T
10-6
10-5
10-4
10-3
10-2
10-1
1
tp (s)
Fig 3. Transient thermal impedance from junction to mounting base as a function of pulse duration
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
4 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
6. Characteristics
Table 6.
Symbol
Characteristics
Parameter
Conditions
Min
Typ
Max
Unit
Static characteristics
V(BR)DSS drain-source breakdown
voltage
ID = 250 µA; VGS = 0 V; Tj = 25 °C
ID = 250 µA; VGS = 0 V; Tj = -55 °C
55
50
1.5
-
-
V
V
V
-
-
VGS(th)
gate-source threshold voltage ID = 1 mA; VDS = VGS; Tj = 25 °C;
see Figure 4
2.1
2.5
ID = 1 mA; VDS = VGS; Tj = -55 °C;
see Figure 4
-
-
-
2.8
-
V
V
ID = 1 mA; VDS = VGS; Tj = 175 °C;
see Figure 4
0.8
IDSS
drain leakage current
gate leakage current
VDS = 55 V; VGS = 0 V; Tj = 175 °C
VDS = 55 V; VGS = 0 V; Tj = 25 °C
VDS = 0 V; VGS = 20 V; Tj = 25 °C
VDS = 0 V; VGS = -20 V; Tj = 25 °C
-
-
-
-
-
-
500
1
µA
µA
nA
nA
mΩ
0.02
2
IGSS
100
100
[tbd]
2
RDSon
drain-source on-state
resistance
VGS = 5 V; ID = 15 A; Tj = 25 °C;
see Figure 5
[tbd]
VGS = 10 V; ID = 15 A; Tj = 25 °C;
see Figure 5
-
-
-
2.7
[tbd]
-
3.5
mΩ
mΩ
mΩ
VGS = 4.5 V; ID = 15 A; Tj = 25 °C;
[tbd]
7.4
see Figure 5
VGS = 10 V; ID = 15 A; Tj = 175 °C;
see Figure 5
Dynamic characteristics
QG(tot)
total gate charge
ID = 25 A; VDS = 40 V; VGS = 10 V
ID = 25 A; VDS = 40 V; VGS = 5 V
ID = 25 A; VDS = 40 V; VGS = 10 V
-
-
-
-
-
-
-
-
-
-
-
-
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
4.5
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
[tbd]
-
nC
nC
nC
nC
pF
pF
pF
ns
QGS
QGD
Ciss
Coss
Crss
td(on)
tr
gate-source charge
gate-drain charge
input capacitance
output capacitance
reverse transfer capacitance
turn-on delay time
rise time
VGS = 0 V; VDS = 25 V; f = 1 MHz;
Tj = 25 °C
VDS = 30 V; RL = 1.2 Ω; VGS = 10 V;
RG(ext) = 10 Ω
ns
td(off)
tf
turn-off delay time
fall time
ns
ns
LD
internal drain inductance
from drain lead 6 mm from package
to centre of die ; Tj = 25 °C
nH
LS
internal source inductance
from source lead to source bond
pad ; Tj = 25 °C
-
7.5
-
nH
Source-drain diode
VSD
trr
source-drain voltage
IS = 25 A; VGS = 0 V; Tj = 25 °C
-
-
-
0.85
[tbd]
[tbd]
1.2
V
reverse recovery time
recovered charge
IS = 20 A; dIS/dt = -100 A/µs;
VGS = 0 V; VDS = 25 V
[tbd]
[tbd]
ns
nC
Qr
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
5 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
003aad001
03ne89
3
2
VGS(th)
(V)
a
max
2.25
1.5
0.75
0
1.5
1
typ
min
0.5
0
-60
-60
0
60
120
180
0
60
120
180
T ( C)
Tj (°C)
°
j
Fig 4. Gate-source threshold voltage as a function of
junction temperature
Fig 5. Normalized drain-source on-state resistance
factor as a function of junction temperature
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
6 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
7. Package outline
Plastic single-ended surface-mounted package (D2PAK); 3 leads (one lead cropped)
SOT404
A
A
E
1
mounting
base
D
1
D
H
D
2
L
p
1
3
c
b
e
e
Q
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
D
E
A
A
b
UNIT
c
D
e
L
H
Q
1
1
p
D
max.
4.50
4.10
1.40
1.27
0.85
0.60
0.64
0.46
1.60
1.20
10.30
9.70
2.90 15.80 2.60
2.10 14.80 2.20
mm
11
2.54
REFERENCES
JEDEC JEITA
EUROPEAN
ISSUE DATE
PROJECTION
OUTLINE
VERSION
IEC
05-02-11
06-03-16
SOT404
Fig 6. Package outline SOT404 (D2PAK)
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
7 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
8. Revision history
Table 7.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BUK663R5-55C v.1
20100803
Objective data sheet
-
-
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
8 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
9. Legal information
9.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URL http://www.nxp.com.
Suitability for use in automotive applications — This NXP
9.2 Definitions
Semiconductors product has been qualified for use in automotive
applications. The product is not designed, authorized or warranted to be
suitable for use in medical, military, aircraft, space or life support equipment,
nor in applications where failure or malfunction of an NXP Semiconductors
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. NXP Semiconductors accepts no
liability for inclusion and/or use of NXP Semiconductors products in such
equipment or applications and therefore such inclusion and/or use is at the
customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
9.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
9 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
9.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,
FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE,
ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse,
QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug, TOPFET,
TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V.
Export control — This document as well as the item(s) described herein may
be subject to export control regulations. Export might require a prior
authorization from national authorities.
HD Radio and HD Radio logo — are trademarks of iBiquity Digital
Corporation.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
BUK663R5-55C
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective data sheet
Rev. 01 — 3 August 2010
10 of 11
BUK663R5-55C
NXP Semiconductors
N-channel TrenchMOS FET
11. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . .1
Features and benefits. . . . . . . . . . . . . . . . . . . . .1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Quick reference data . . . . . . . . . . . . . . . . . . . . .1
2
3
4
5
6
7
8
Pinning information. . . . . . . . . . . . . . . . . . . . . . .2
Ordering information. . . . . . . . . . . . . . . . . . . . . .2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3
Thermal characteristics . . . . . . . . . . . . . . . . . . .4
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . .5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . .7
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . .8
9
Legal information. . . . . . . . . . . . . . . . . . . . . . . . .9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . .9
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .10
9.1
9.2
9.3
9.4
10
Contact information. . . . . . . . . . . . . . . . . . . . . .10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 3 August 2010
Document identifier: BUK663R5-55C
相关型号：
BUK6C1R5-40C
TRANSISTOR 319 A, 40 V, 0.0021 ohm, N-CHANNEL, Si, POWER, MOSFET, PLASTIC, D2PAK-7, FET General Purpose Power
NXP
©2020 ICPDF网 联系我们和版权申明