CBT3306D-T [NXP]
暂无描述;
| 型号： | CBT3306D-T |
| 厂家： | 
NXP |
| 描述： | 暂无描述 开关 |
| 文件： | 总8页 (文件大小：75K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
CBT3306
Dual bus switch
Product data
2001 Nov 08
File under Integrated Circuits — ICL03
Philips
Semiconductors
Philips Semiconductors
Product data
Dual bus switch
CBT3306
FEATURES
PIN CONFIGURATION
• 5 Ω switch connection between two ports
1
8
7
6
5
V
CC
• TTL-compatible input levels
1OE
2
3
4
1A
1B
2OE
2B
• Package options include plastic small outline (SO) and
thin shrink small outline (TSSOP)
GND
2A
• Latch-up protection exceeds 100 mA per JESD78
• ESD protection exceeds 2000 V HBM per JESD22-A114 and
SA00535
1000 V CDM per JESD22-C101
PIN DESCRIPTION
DESCRIPTION
PIN NUMBER
SYMBOL
1OE, 2OE
1A, 2A
NAME AND FUNCTION
Output enable
The CBT3306 Dual FET Bus Switch features independent line
switches. Each switch is disabled with the associated Output Enable
(OE) input is high.
1, 7
2, 5
3, 6
4
A port inputs
1B, 2B
B port outputs
The CBT3306 is characterized for operation from –40 to +85 °C.
GND
Ground (0 V)
8
V
CC
Positive supply voltage
QUICK REFERENCE DATA
CONDITIONS
= 25 °C; GND = 0 V
SYMBOL
PARAMETER
TYPICAL
UNIT
T
amb
t
t
Propagation delay
A to B or B to A
PLH
PHL
C = 50 pF; V = +5.0 V ±0.5 V
0.25 (MAX)
ns
L
CC
C
Pin capacitance (OFF state)
Quiescent supply current
V
V
= 3 V or 0; OE = V
CC
6.45
3
pF
IO(OFF)
O
I
= 5.5 V; I = 0, V = V or GND
µA
CC
CC
O
I
CC
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
–40 to 85 °C
ORDER CODE
CBT3306D
DWG NUMBER
SOT96-1
8-pin plastic SO
8-pin plastic TSSOP
–40 to 85 °C
CBT3306PW
SOT530-1
Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.
LOGIC DIAGRAM (positive logic)
FUNCTION TABLE
INPUT
2
3
6
FUNCTION
1A
1B
2B
OE
L
A port = B port
Disconnect
1
1OE
H
5
2A
7
2OE
SA00534
2
2001 Nov 08
853-2304 27313
Philips Semiconductors
Product data
Dual bus switch
CBT3306
1
ABSOLUTE MAXIMUM RATINGS
amb
T
= –40 to +85 °C, unless otherwise specified.
SYMBOL
PARAMETER
DC supply voltage
CONDITIONS
RATING
–0.5 to +7.0
–0.5 to +7.0
128
UNIT
V
V
CC
2
V
I
DC input voltage
V
I
DC output current
Diode current
mA
mA
°C
OUT
I
IK
V
I/O
< 0
–50
T
stg
Storage temperature range
–65 to +150
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
3. The package thermal impedance is calculated in accordance with JESD 51.
1
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
PARAMETER
UNIT
MIN
4.5
2.0
—
MAX
5.5
V
CC
DC supply voltage
V
V
V
IH
High-level input voltage
Low-level Input voltage
—
V
IL
0.8
V
T
amb
Operating free-air temperature range
–40
+85
°C
NOTE:
1. All unused control inputs of the device must be held at V or GND to ensure proper device operation.
CC
DC ELECTRICAL CHARACTERISTICS
T
amb
= –40 to +85 °C, unless otherwise specified.
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
T
MIN
—
= –40 to +85 °C
UNIT
amb
1
TYP
—
MAX
V
IK
Input clamp voltage
V
V
V
= 4.5 V; I = –18 mA
–1.2
±1
V
µA
µA
V
CC
CC
CC
I
I
I
Input leakage current
= 5.5 V; V = GND or 5.5 V
—
—
I
I
Quiescent supply current
Output high pass voltage
= 5.5 V; I = 0, V = V or GND
—
—
3
CC
O
I
CC
V
P
V = V = 5.0 V; I = –100 µA
3.4
3.6
3.9
I
CC
O
V
= 5.5 V, one input at 3.4 V,
CC
2
∆I
CC
Additional supply current per input pin
—
—
2.5
mA
other inputs at V or GND
CC
C
Control pin capacitance
Port off capacitance
V = 3 V or 0
—
—
—
—
—
3.15
6.45
3.4
—
—
5
pF
pF
Ω
I
I
C
V
V
V
V
= 3 V or 0; OE = V
CC
IO(OFF)
O
= 4.5 V; V = 0 V; I = 64 mA
CC
CC
CC
I
I
3
r
= 4.5 V; V = 0 V; I = 30 mA
3.4
5
Ω
On-resistance
I
I
on
= 4.5 V; V = 2.4 V; I = 15 mA
6.8
7.5
Ω
I
I
NOTES:
1. All typical values are at V = 5 V, T
= 25 °C.
amb
CC
2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than V or GND
CC
3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch.
On-state resistance is determined by the lowest voltage of the two (A or B) terminals.
3
2001 Nov 08
Philips Semiconductors
Product data
Dual bus switch
CBT3306
AC CHARACTERISTICS
T
amb
= –40 to +85 °C; C = 50 pF
L
LIMITS
= +5.0 V ±0.5 V
MAX
TO
(OUTPUT)
V
SYMBOL
PARAMETER
FROM (INPUT)
UNIT
CC
MIN
1
t
t
Propagation delay
A or B
OE
B or A
A or B
—
0.25
ns
ns
pd
Output enable time
to High and Low level
1.8
1
5
5
en
Output disable time
from High and Low level
t
dis
OE
A or B
ns
NOTE:
1. The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance,
when driven by an ideal voltage source (zero output impedance).
AC WAVEFORMS
TEST CIRCUIT AND WAVEFORMS
V
= 1.5 V, V = GND to 3.0 V
M
IN
7 V
3 V
0 V
500 Ω
S1
From Output
Under Test
Open
GND
1.5 V
1.5 V
INPUT
500 Ω
C
= 50 pF
L
t
t
PHL
PLH
Load Circuit
V
OH
1.5 V
1.5 V
TEST
S1
OUTPUT
t
open
7 V
pd
V
OL
t
/t
PLZ PZL
SA00028
t
/t
open
PHZ PZH
Waveform 1. Input to Output Propagation Delays
DEFINITIONS
C
=
Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
L
3 V
Output Control
(Low-level
SA00012
1.5 V
1.5 V
enabling )
NOTES:
1. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.
0 V
t
t
PLZ
PZL
O
r
f
3.5 V
2. The outputs are measured one at a time with one transition per
Output
Waveform 1
S1 at 7 V
measurement.
1.5 V
1.5 V
V
V
+ 0.3 V
– 0.3 V
OL
(see Note)
V
V
OL
t
t
PHZ
PZH
OH
Output
Waveform 2
S1 at Open
(see Note)
OH
0 V
Note:
Waveform 1 is for an output with internal conditions such that
the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that
the output is high except when disabled by the output control.
SA00029
Waveform 2. 3-State Output Enable and Disable Times
NOTES:
1. t
2. t
3. t
and t
and t
and t
are the same as t
.
dis
.
pd
PLZ
PZL
PLH
PHZ
PZH
are the same as t
en
are the same as t .
PHL
4
2001 Nov 08
Philips Semiconductors
Product data
Dual bus switch
CBT3306
TSSOP8: plastic thin shrink small outline; 8 leads; body width 4.4 mm
SOT530-1
5
2001 Nov 08
Philips Semiconductors
Product data
Dual bus switch
CBT3306
SO8: plastic small outline package; 8 leads; body width 3.9 mm
SOT96-1
6
2001 Nov 08
Philips Semiconductors
Product data
Dual bus switch
CBT3306
NOTES
7
2001 Nov 08
Philips Semiconductors
Product data
Dual bus switch
CBT3306
Data sheet status
Product
status
Definitions
[1]
Data sheet status
[2]
Objective data
Development
Qualification
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
Preliminary data
Product data
This data sheet contains data from the preliminary specification. Supplementary data will be
published at a later date. Philips Semiconductors reserves the right to change the specification
without notice, in order to improve the design and supply the best possible product.
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply.
Changes will be communicated according to the Customer Product/Process Change Notification
(CPCN) procedure SNW-SQ-650A.
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Righttomakechanges—PhilipsSemiconductorsreservestherighttomakechanges, withoutnotice, intheproducts, includingcircuits,standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
Koninklijke Philips Electronics N.V. 2001
Contact information
All rights reserved. Printed in U.S.A.
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 11-01
9397 750 09115
For sales offices addresses send e-mail to:
sales.addresses@www.semiconductors.philips.com.
Document order number:
Philips
Semiconductors
相关型号：
CBT3306PW-Q100
CBT/FST/QS/5C/B SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, 4.40 MM, PLASTIC, MO-153, SOT530-1, TSSOP-8
NXP
CBT3306PW-T
IC CBT/FST/QS/5C/B SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, 4.4, PLASTIC, MO-153, SOT-530-1, TSSOP-8, Bus Driver/Transceiver
NXP
©2020 ICPDF网 联系我们和版权申明