MPC7410TXXNNNNE [NXP]

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series;


型号：	MPC7410TXXNNNNE
厂家：	NXP
描述：	MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series PC
文件：	总6页 (文件大小：477K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Document Number: MPC7410ECS07AD

Rev. 2, 11/2010

Freescale Semiconductor

Technical Data

MPC7410 RISC Microprocessor

Hardware Specifications Addendum

for the MPC7410TxxnnnNE Series

Freescale Part Numbers Affected:

This document describes part-number-specific changes to

the MPC7410 RISC Microprocessor Hardware

Specifications (Document No. MPC7410EC).

MPC7410TRX400NE

MPC7410TRX450NE

MPC7410THX450NE

Specifications provided in this document supersede those in

the MPC7410 RISC Microprocessor Hardware

Specifications, Rev. 6.1 or later, for the part numbers listed

in Table A. only. Specifications not addressed herein are

unchanged.

Because this document is frequently updated, see the website

listed on the back page of this document or contact your

Freescale sales office for the latest version.

Table A. Part-Number-Specific Changes

Operating Conditions

Freescale Part

Number

Significant Differences from Hardware

CPU

Frequency

Specification

Vdd

T (°C)

OVdd

MPC7410TRX400NE 400 MHz

1.5V 50mV -40 to 105

1.8/2.5 V Extended temperature range. Reduced core

voltage to achieve lower power consumption.

Removes 3.3 V OVdd support. For all AC/DC

specifications not mentioned in this document,

see the MPC7410RX400LE specifications in the

general MPC7410 Hardware Specifications.

450 MHz 1.8V 100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The

MPC7410TRX400NE also fully conforms to the

MPC7410TRX450LE specification. See the

general MPC7410 Hardware Specifications.

MPC7410TRX450NE 450 MHz

1.5V 50mV -40 to 105

1.8/2.5 V Extended temperature range. Reduced core

voltage to achieve lower power consumption.

Removes 3.3V OVdd support. For all AC/DC

specifications not mentioned in this document,

please refer to the MPC7410RX450LE

specifications in the general MPC7410

Hardware Specifications.

500 MHz 1.8V 100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The

MPC7410TRX450NE also fully conforms to the

MPC7410TRX500LE specification. See the

general MPC7410 Hardware Specifications.

MPC7410THX450NE 450 MHz

1.5V 50mV -40 to 105

1.8/2.5 V Extended temperature range. Reduced core

voltage to achieve lower power consumption.

Removes 3.3V OVdd support. For all AC/DC

specifications not mentioned in this document,

see to the MPC7410HX450LE specifications in

the general MPC7410 Hardware Specifications.

500 MHz 1.8V 100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The

MPC7410THX450NE also fully conforms to the

MPC7410THX500LE specification. See the

general MPC7410 Hardware Specifications.

Features

The MPC7410TxxnnnNE feature set is identical to that of the MPC7410, with the following exceptions:

•

Bus interface

— Selectable interface voltages of 1.8 V, 2.5 V (3.3 V is not supported)

DC Electrical Characteristics

The MPC7410TxxnnnNE DC electrical characteristics are identical to that of the MPC7410, with the

exceptions shown in Table B, Table C, and Table D.

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2

Freescale Semiconductor

Voltage to the L2 I/Os and processor interface I/Os are provided through separate sets of supply pins and

may be provided at the voltages shown in Table B.

Table B. Input Threshold Voltage Setting

Processor Bus Input

Threshold is Relative to:

L2 Bus Input Threshold is

Relative to:

BVSEL Signal

L2VSEL Signal

Note

1.8 V

2.5 V

1, 2

1, 4, 5

—

HRESET

2.5 V

HRESET

Not Supported

2.5 V

HRESET

Not Supported

Notes:

1. Caution: The input threshold selection must agree with the OVdd/L2OVdd voltages supplied.

2. To select the 2.5-V threshold option, BVSEL and/or L2VSEL should be tied to HRESET so that the two signals change state

together. This is the preferred method for selecting this mode of operation.

3. To overcome the internal pull-up resistance, a pull-down resistance less than 250 ohms should be used.

4. Default voltage setting if left unconnected (internal pulled-up).

5. Caution: The MPC7410TRXnnnNE does not support the default OVdd setting of 3.3 V. The BVSEL input must be tie either

low or to HRESET.

Table C. Recommended Operating Conditions

Characteristic

Symbol

Recommended Value

Unit

Core supply voltage

PLL supply voltage

Vdd

AVdd

1.5V 50mV

1.8V 100mV

2.5V 100mV

Not Supported

L2 DLL supply voltage

L2AVdd

OVdd

Processor bus supply voltage

BVSEL = 0

BVSEL = HRESET

or BVSEL = 1

L2 bus supply voltage

Input voltage

L2VSEL = 0

L2OVdd

1.8V 100mV

2.5V 100mV

L2VSEL = HRESET

or L2VSEL = 1

Processor bus and

JTAG Signals

GND to OVdd

L2 Bus

GND to L2OVdd

-40 to 105

Die-junction temperature

°C

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2

Freescale Semiconductor

Table D. Power Consumption for MPC7410

Processor (CPU)

Frequency

Processor (CPU)

Frequency

Unit

Notes

400 MHz

450 MHz

Full-On Mode

Typical

2.92

6.6

3.29

7.43

1, 3

1, 2,

Maximum

Doze Mode

Nap Mode

Sleep Mode

3.6

1.35

1.3

4.1

1.5

1, 2

1.45

Sleep Mode—PLL and DLL Disabled

Typical

Maximum

0.6

1.1

0.6

1.1

1, 3

1, 2

Notes:

1. These values apply for all valid processor bus and L2 bus ratios. The values do not include I/O Supply Power

(OVdd and L2OVdd) or PLL/DLL supply power (AVdd and L2AVdd). OVdd and L2OVdd power is system

dependent, but is typically <10% of Vdd power. Worst case power consumption for AVdd = 15 mw and L2AVdd

= 15 mW.

2. Maximum power is measured at 105 •C and Vdd = 1.5V while running an entirely cache-resident, contrived

sequence of instructions which keep the execution units, including AltiVec, maximally busy.

3. Typical power is an average value measured at 65 •C and Vdd = 1.5V in a system while running typical

benchmarks.

Part Numbers Addressed by this Specification

Table E provides the ordering information for the MPC7410TxxnnnNE series.

Table E. Part Marking Nomenclature

MPC 7410

nnn

Product

Code

Part

Identifier

Process

Descriptor

Processor

Frequency

Application

Modifier

Package

Revision Level

MPC

7410

T: –40° to 105°C

RX = CBGA

400

450

N: 1.5 V 50 mV

E: 1.4; PVR = 800C 1104

HX = HCTE_CBGA

450

Note:

1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications

may support other maximum core frequencies.

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2

Freescale Semiconductor

Part Marking

Parts are marked as the example shown in Figure A.

MPC7410

TRXnnnNE

MMMMMM

ATWLYYWWA

7410

BGA

Notes:

nnn is the speed grade of the part

MMMMMM is the 6-digit mask number

ATWLYYWWA is the traceability code

CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)

Figure A. Freescale Part Marking for BGA Device

Document Revision History

Table F provides a revision history for this document.

Table F. Document Revision History

Substantive Changes

Rev.

Number

Date

11/2010

• Removed “RX” from document title.

• Added MPC7410THX450NE to list of devices covered by this document.

• In Table B, “Input Threshold Voltage Setting,” changed “XPC7410TRXnnnNE” to

“MPC7410TRXnnnNE” in note 5.

• Updated Table E, “Part Marking Nomenclature,” to include MPC7410THX450NE.

1.2

1.1

4/2005

5/2003

• Document template update

• Document ID change from MPC7410TRXNEPNS/D for Part Number Specification to

MPC7410ECS07AD for Hardware Specification Addendum.

Rather than readers of this spec referring to the MPC7410RXnnnNE part number spec and then to

the MPC7410RXnnnLE general hardware spec, this spec now includes the spec differences outlined

in the MPC7410RXnnnNE part number spec. Any specifications not called out in this spec for the part

numbers listed in Table A default back to the general hardware spec.

—

Minor formatting

Initial Release

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2

Freescale Semiconductor

How to Reach Us:

Home Page:

www.freescale.com

Web Support:

http://www.freescale.com/support

USA/Europe or Locations Not Listed:

Freescale Semiconductor, Inc.

Technical Information Center, EL516

2100 East Elliot Road

Tempe, Arizona 85284

1-800-521-6274 or

Information in this document is provided solely to enable system and software

implementers to use Freescale Semiconductor products. There are no express or

implied copyright licenses granted hereunder to design or fabricate any integrated

circuits or integrated circuits based on the information in this document.

+1-480-768-2130

www.freescale.com/support

Freescale Semiconductor reserves the right to make changes without further notice to

any products herein. Freescale Semiconductor makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does

Freescale Semiconductor assume any liability arising out of the application or use of

any product or circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters which may be

provided in Freescale Semiconductor data sheets and/or specifications can and do

vary in different applications and actual performance may vary over time. All operating

parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. Freescale Semiconductor does not convey any license

under its patent rights nor the rights of others. Freescale Semiconductor products are

not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life,

or for any other application in which the failure of the Freescale Semiconductor product

could create a situation where personal injury or death may occur. Should Buyer

purchase or use Freescale Semiconductor products for any such unintended or

unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of,

directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that Freescale

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

www.freescale.com/support

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku

Tokyo 153-0064

Japan

0120 191014 or

+81 3 5437 9125

support.japan@freescale.com

Asia/Pacific:

Freescale Semiconductor China Ltd.

Exchange Building 23F

No. 118 Jianguo Road

Chaoyang District

Semiconductor was negligent regarding the design or manufacture of the part.

Beijing 100022

China

+86 10 5879 8000

support.asia@freescale.com

Freescale, the Freescale logo, and PowerQUICC are trademarks of

Freescale Semiconductor, Inc. Reg. U.S. Pat. & Tm. Off. CoreNet, QorIQ,

QUICC Engine, and VortiQa are trademarks of Freescale Semiconductor,

Inc. All other product or service names are the property of their respective

owners. The Power Architecture and Power.org word marks and the Power

and Power.org logos and related marks are trademarks and service marks

licensed by Power.org.

For Literature Requests Only:

Freescale Semiconductor

Literature Distribution Center

1-800 441-2447 or

+1-303-675-2140

Fax: +1-303-675-2150

LDCForFreescaleSemiconductor

@hibbertgroup.com

Document Number: MPC7410ECS07AD

Rev. 2

11/2010

MPC7410TXXNNNNE [NXP]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E