首页 |元器件品牌

NTB0101GM,115 [NXP]

NTB0101 - Dual supply translating transceiver; auto direction sensing; 3-state SON 6-Pin;
NTB0101GM,115
型号： NTB0101GM,115
厂家： NXP    NXP
描述：

NTB0101 - Dual supply translating transceiver; auto direction sensing; 3-state SON 6-Pin

驱动 光电二极管 接口集成电路 驱动器
文件： 总25页 (文件大小：213K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
NTB0101  
Dual supply translating transceiver; auto direction sensing;  
3-state  
Rev. 5 — 24 February 2016  
Product data sheet  
1. General description  
The NTB0101 is a 1-bit, dual supply translating transceiver with auto direction sensing,  
that enables bidirectional voltage level translation. It features two 1-bit input-output ports  
(A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)  
can be supplied with any voltage between 1.2 V and 3.6 V. VCC(B) can be supplied with  
any voltage between 1.65 V and 5.5 V. This flexibility allows translation between any of  
the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).  
Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at  
pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully  
specified for partial power-down applications using IOFF. The IOFF circuitry disables the  
output, preventing the damaging backflow current through the device when it is powered  
down.  
2. Features and benefits  
Wide supply voltage range:  
VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V  
IOFF circuitry provides partial Power-down mode operation  
Inputs accept voltages up to 5.5 V  
ESD protection:  
HBM JESD22-A114E Class 2 exceeds 2500 V for A port  
HBM JESD22-A114E Class 3B exceeds 15000 V for B port  
MM JESD22-A115-A exceeds 200 V  
CDM JESD22-C101E exceeds 1500 V  
Latch-up performance exceeds 100 mA per JESD 78B Class II  
Multiple package options  
Specified from 40 C to +85 C and 40 C to +125 C  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
3. Ordering information  
Table 1.  
Ordering information  
Type number  
Package  
Temperature range Name  
Description  
Version  
NTB0101GW  
NTB0101GM  
40 C to +125 C  
40 C to +125 C  
SC-88  
plastic surface-mounted package; 6 leads  
SOT363  
XSON6  
plastic extremely thin small outline package; no leads; SOT886  
6 terminals; body 1 1.45 0.5 mm  
NTB0101GF  
NTB0101GS  
40 C to +125 C  
40 C to +125 C  
XSON6  
XSON6  
plastic extremely thin small outline package; no leads; SOT891  
6 terminals; body 1 1 0.5 mm  
extremely thin small outline package; no leads;  
SOT1202  
6 terminals; body 1.0 1.0 0.35 mm  
4. Marking  
Table 2.  
Marking  
Type number  
NTB0101GW  
NTB0101GM  
NTB0101GF  
NTB0101GS  
Marking code[1]  
t1  
t1  
t1  
t1  
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.  
5. Functional diagram  
5
OE  
3
A
4
B
V
CC(A)  
V
CC(B)  
001aan311  
Fig 1. Logic symbol  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
2 of 25  
 
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
6. Pinning information  
6.1 Pinning  
NTB0101  
NTB0101  
V
1
2
3
6
5
4
V
CC(B)  
CC(A)  
GND  
NTB0101  
1
2
3
6
5
4
V
V
CC(B)  
V
1
2
3
6
5
4
V
CC(B)  
CC(A)  
GND  
CC(A)  
GND  
OE  
B
OE  
B
OE  
B
A
A
A
001aan313  
001aan314  
Transparent top view  
Transparent top view  
001aan312  
Fig 2. Pin configuration SOT363  
Fig 3. Pin configuration SOT886  
Fig 4. Pin configuration SOT891  
and SOT1202  
6.2 Pin description  
Table 3.  
Symbol  
VCC(A)  
GND  
A
Pin description  
Pin  
1
Description  
supply voltage A  
ground (0 V)  
2
3
data input or output (referenced to VCC(A)  
)
)
B
4
data input or output (referenced to VCC(B)  
OE  
5
output enable input (active HIGH; referenced to VCC(A)  
)
VCC(B)  
6
supply voltage B  
7. Functional description  
Table 4.  
Function table[1]  
Supply voltage  
VCC(A)  
Input  
OE  
L
Input/output  
VCC(B)  
A
B
1.2 V to VCC(B)  
1.2 V to VCC(B)  
GND[2]  
1.65 V to 5.5 V  
1.65 V to 5.5 V  
GND[2]  
Z
Z
H
input or output  
Z
output or input  
Z
X
[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.  
[2] When either VCC(A) or VCC(B) is at GND level, the device goes into Power-down mode.  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
3 of 25  
 
 
 
 
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
8. Limiting values  
Table 5.  
Limiting values  
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).  
Symbol  
VCC(A)  
VCC(B)  
VI  
Parameter  
Conditions  
Min  
0.5  
0.5  
0.5  
0.5  
0.5  
50  
50  
-
Max  
+6.5  
+6.5  
+6.5  
VCCO + 0.5  
+6.5  
-
Unit  
V
supply voltage A  
supply voltage B  
input voltage  
V
[1]  
[1][2][3]  
[1]  
V
VO  
output voltage  
Active mode  
V
Power-down or 3-state mode  
VI < 0 V  
V
IIK  
input clamping current  
output clamping current  
output current  
mA  
mA  
mA  
mA  
mA  
C  
mW  
IOK  
IO  
VO < 0 V  
-
[2]  
VO = 0 V to VCCO  
ICC(A) or ICC(B)  
50  
100  
-
ICC  
IGND  
Tstg  
Ptot  
supply current  
-
ground current  
100  
65  
-
storage temperature  
total power dissipation  
+150  
250  
[4]  
Tamb = 40 C to +125 C  
[1] If the input and output current ratings are observed, the minimum input and minimum output voltage ratings may be exceeded.  
[2] CCO is the supply voltage associated with the output.  
V
[3] VCCO + 0.5 V should not exceed 6.5 V.  
[4] For SC-88 and SC-74A packages: above 87.5 C, the value of Ptot derates linearly with 4.0 mW/K.  
For XSON6 packages: above 118 C, the value of Ptot derates linearly with 7.8 mW/K.  
9. Recommended operating conditions  
Table 6.  
Symbol  
VCC(A)  
VCC(B)  
VI  
Recommended operating conditions[1][2]  
Parameter  
Conditions  
Min  
1.2  
1.65  
0
Max  
3.6  
Unit  
V
supply voltage A  
supply voltage B  
input voltage  
5.5  
5.5  
V
V
VO  
output voltage  
Power-down or 3-state mode;  
CC(A) = 1.2 V to 3.6 V;  
V
VCC(B) = 1.65 V to 5.5 V  
A port  
B port  
0
3.6  
V
0
5.5  
V
Tamb  
ambient temperature  
40  
+125  
40  
C  
ns/V  
t/V  
input transition rise and fall rate VCC(A) = 1.2 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
-
[1] The A and B sides of an unused I/O pair must be held in the same state, both at VCCI or both at GND.  
[2] VCC(A) must be less than or equal to VCC(B)  
.
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
4 of 25  
 
 
 
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
10. Static characteristics  
Table 7.  
Typical static characteristics  
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); Tamb = 25 C.  
Symbol Parameter  
Conditions  
Min  
Typ  
Max  
Unit  
VOH  
VOL  
II  
HIGH-level  
output voltage  
A port; VCC(A) = 1.2 V; IO = 20 A  
-
1.1  
-
V
LOW-level  
output voltage  
A port; VCC(A) = 1.2 V; IO = 20 A  
-
-
-
-
-
0.09  
-
V
input leakage  
current  
OE input; VI = 0 V to 3.6 V; VCC(A) = 1.2 V to 3.6 V;  
-
-
-
-
1  
1  
1  
1  
A  
A  
A  
A  
VCC(B) = 1.65 V to 5.5 V  
[1]  
IOZ  
IOFF  
OFF-stateoutput A or B port; VO = 0 V to VCCO; VCC(A) = 1.2 V to 3.6 V;  
current  
VCC(B) = 1.65 V to 5.5 V  
power-off  
A port; VI or VO = 0 V to 3.6 V;  
leakage current VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V  
B port; VI or VO = 0 V to 5.5 V;  
VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V  
[2]  
ICC  
supply current  
VI = 0 V or VCCI; IO = 0 A  
ICC(A); VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V  
ICC(B); VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V  
ICC(A) + ICC(B); VCC(A) = 1.2 V; VCC(B) = 1.65 V to 5.5 V  
OE input; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V  
-
-
-
-
0.05  
3.3  
-
-
-
-
A  
A  
A  
pF  
3.5  
1.0  
CI  
input  
capacitance  
CI/O  
input/output  
capacitance  
A port; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V  
B port; VCC(A) = 1.2 V to 3.6 V; VCC(B) = 1.65 V to 5.5 V  
-
-
4.0  
7.5  
-
-
pF  
pF  
[1] VCCO is the supply voltage associated with the output.  
[2] VCCI is the supply voltage associated with the input.  
Table 8.  
Typical supply current  
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); Tamb = 25 C.  
VCC(A)  
VCC(B)  
Unit  
1.8 V  
2.5 V  
3.3 V  
5.0 V  
ICC(A)  
10  
10  
10  
-
ICC(B)  
10  
10  
10  
-
ICC(A)  
10  
10  
10  
10  
-
ICC(B)  
10  
10  
10  
10  
-
ICC(A)  
10  
ICC(B)  
20  
ICC(A)  
10  
ICC(B)  
1.2 V  
1.5 V  
1.8 V  
2.5 V  
3.3 V  
1050  
650  
350  
40  
nA  
nA  
nA  
nA  
nA  
10  
10  
10  
10  
10  
10  
10  
10  
10  
-
-
10  
10  
10  
10  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
5 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 9.  
Static characteristics  
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).  
Symbol Parameter  
Conditions  
40 C to +85 C  
40 C to +125 C  
Unit  
Min  
Max  
Min  
Max  
[1]  
[1]  
[2]  
VIH  
HIGH-level  
input voltage  
A or B port and OE input  
VCC(A) = 1.2 V to 3.6 V;  
0.65 VCCI  
-
0.65 VCCI  
-
V
V
V
CC(B) = 1.65 V to 5.5 V  
VIL  
LOW-level  
input voltage  
A or B port and OE input  
VCC(A) = 1.2 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
-
0.35 VCCI  
-
0.35 VCCI  
VOH  
HIGH-level  
IO = 20 A  
output voltage  
A port; VCC(A) = 1.4 V to 3.6 V  
B port; VCC(B) = 1.65 V to 5.5 V  
IO = 20 A  
VCCO 0.4  
VCCO 0.4  
-
-
VCCO 0.4  
VCCO 0.4  
-
-
V
V
[2]  
VOL  
LOW-level  
output voltage  
A port; VCC(A) = 1.4 V to 3.6 V  
B port; VCC(B) = 1.65 V to 5.5 V  
-
-
-
0.4  
0.4  
2  
-
-
-
0.4  
0.4  
5  
V
V
II  
input leakage OE input; VI = 0 V to 3.6 V;  
A  
current  
VCC(A) = 1.2 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
[2]  
IOZ  
OFF-state  
A or B port; VO = 0 V or VCCO  
;
-
2  
-
10  
A  
output current VCC(A) = 1.2 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
IOFF  
power-off  
leakage  
current  
A port; VI or VO = 0 V to 3.6 V;  
VCC(A) = 0 V; VCC(B) = 0 V to 5.5 V  
-
-
2  
2  
-
-
10  
10  
A  
A  
B port; VI or VO = 0 V to 5.5 V;  
VCC(B) = 0 V; VCC(A) = 0 V to 3.6 V  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
6 of 25  
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 9.  
Static characteristics …continued  
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).  
Symbol Parameter Conditions 40 C to +85 C  
40 C to +125 C  
Unit  
Min  
Max  
Min  
Max  
[1]  
ICC  
supply current VI = 0 V or VCCI; IO = 0 A  
ICC(A)  
OE = LOW;  
VCC(A) = 1.4 V to 3.6 V;  
-
-
3
3
-
-
15  
20  
A  
A  
V
CC(B) = 1.65 V to 5.5 V  
OE = HIGH;  
VCC(A) = 1.4 V to 3.6 V;  
V
CC(B) = 1.65 V to 5.5 V  
V
CC(A) = 3.6 V; VCC(B) = 0 V  
-
-
2
-
-
15  
A  
A  
VCC(A) = 0 V; VCC(B) = 5.5 V  
ICC(B)  
2  
15  
OE = LOW;  
VCC(A) = 1.4 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
-
-
5
5
-
-
15  
20  
A  
A  
OE = HIGH;  
V
CC(A) = 1.4 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
VCC(A) = 3.6 V; VCC(B) = 0 V  
VCC(A) = 0 V; VCC(B) = 5.5 V  
CC(A) + ICC(B)  
-
-
2  
-
-
15  
A  
A  
2
15  
I
VCC(A) = 1.4 V to 3.6 V;  
VCC(B) = 1.65 V to 5.5 V  
-
8
-
40  
A  
[1] VCCI is the supply voltage associated with the input.  
[2] VCCO is the supply voltage associated with the output.  
11. Dynamic characteristics  
Table 10. Typical dynamic characteristics for temperature 25 C[1]  
Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 7; for waveforms, see Figure 5 and Figure 6.  
Symbol Parameter  
Conditions  
VCC(B)  
Unit  
1.8 V  
2.5 V  
3.3 V  
5.0 V  
VCC(A) = 1.2 V; Tamb = 25 C  
tpd  
propagation delay A to B  
5.9  
5.6  
0.5  
6.9  
9.5  
81  
4.8  
4.8  
0.5  
6.9  
8.6  
69  
4.4  
4.5  
0.5  
6.9  
8.5  
83  
4.2  
4.4  
0.5  
6.9  
8.0  
68  
ns  
ns  
s  
ns  
ns  
ns  
ns  
B to A  
ten  
enable time  
disable time  
OE to A, B  
[2]  
[2]  
tdis  
OE to A; no external load  
OE to B; no external load  
OE to A  
OE to B  
81  
69  
83  
68  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
7 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 10. Typical dynamic characteristics for temperature 25 C[1] …continued  
Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 7; for waveforms, see Figure 5 and Figure 6.  
Symbol Parameter  
Conditions  
VCC(B)  
Unit  
1.8 V  
4.0  
2.6  
15  
2.5 V  
4.0  
2.0  
13  
3.3 V  
4.1  
1.7  
13  
5.0 V  
4.1  
1.4  
13  
tt  
transition time  
A port  
ns  
B port  
ns  
tW  
pulse width  
data rate  
data inputs  
ns  
fdata  
70  
80  
80  
80  
Mbps  
[1] tpd is the same as tPLH and tPHL  
.
.
ten is the same as tPZL and tPZH  
tdis is the same as tPLZ and tPHZ  
.
tt is the same as tTHL and tTLH  
[2] Delay between OE going LOW and when the outputs are disabled.  
Table 11. Dynamic characteristics for temperature range 40 C to +85 C[1]  
Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 7; for wave forms, see Figure 5 and Figure 6.  
Symbol Parameter  
Conditions  
VCC(B)  
Unit  
1.8 V 0.15 V 2.5 V 0.2 V 3.3 V 0.3 V 5.0 V 0.5 V  
Min  
Max Min Max Min Max Min Max  
VCC(A) = 1.5 V 0.1 V  
tpd  
propagation  
delay  
A to B  
1.4  
0.9  
-
12.9  
14.2  
1.0  
11.9  
16.9  
320  
200  
5.1  
4.7  
-
1.2  
0.7  
-
10.1  
12.0  
1.0  
11.9  
15.2  
260  
200  
5.1  
3.2  
-
1.1  
0.4  
-
10.0  
11.7  
1.0  
11.9  
14.1  
260  
200  
5.1  
2.5  
-
0.8  
0.3  
-
9.9 ns  
B to A  
13.7 ns  
1.0 s  
11.9 ns  
13.8 ns  
280 ns  
200 ns  
5.1 ns  
2.7 ns  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
-
-
tt  
transition  
time  
A port  
0.9  
0.9  
25  
-
0.9  
0.6  
25  
-
0.9  
0.5  
25  
-
0.9  
0.4  
25  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
40  
40  
40  
40 Mbps  
VCC(A) = 1.8 V 0.15 V  
tpd  
propagation  
delay  
A to B  
1.6  
1.5  
-
11.0  
12.0  
1.0  
11.0  
15.4  
260  
200  
4.1  
4.7  
-
1.4  
1.3  
-
7.7  
8.4  
1.0  
11.0  
13.5  
230  
200  
4.1  
3.2  
-
1.3  
1.0  
-
6.8  
7.6  
1.0  
11.0  
12.4  
230  
200  
4.1  
2.5  
-
1.2  
0.9  
-
6.5 ns  
7.1 ns  
1.0 s  
11.0 ns  
12.1 ns  
230 ns  
200 ns  
4.1 ns  
2.7 ns  
B to A  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
-
-
tt  
transition  
time  
A port  
0.8  
0.9  
20  
-
0.8  
0.6  
17  
-
0.8  
0.5  
17  
-
0.8  
0.4  
17  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
49  
60  
60  
60 Mbps  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
8 of 25  
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 11. Dynamic characteristics for temperature range 40 C to +85 C[1] …continued  
Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 7; for wave forms, see Figure 5 and Figure 6.  
Symbol Parameter  
Conditions  
VCC(B)  
Unit  
1.8 V 0.15 V 2.5 V 0.2 V 3.3 V 0.3 V 5.0 V 0.5 V  
Min  
Max Min Max Min Max Min Max  
VCC(A) = 2.5 V 0.2 V  
tpd  
propagation  
delay  
A to B  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.1  
1.2  
-
6.3  
6.6  
1.0  
9.2  
11.9  
200  
200  
3.0  
3.2  
-
1.0  
1.1  
-
5.2  
5.1  
1.0  
9.2  
10.7  
200  
200  
3.0  
2.5  
-
0.9  
0.9  
-
4.7 ns  
B to A  
4.4 ns  
1.0 s  
9.2 ns  
10.2 ns  
200 ns  
200 ns  
3.0 ns  
2.7 ns  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
-
tt  
transition  
time  
A port  
0.7  
0.7  
12  
-
0.7  
0.5  
10  
-
0.7  
0.4  
10  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
85  
100  
100 Mbps  
VCC(A) = 3.3 V 0.3 V  
tpd  
propagation  
delay  
A to B  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.9  
1.0  
-
4.7  
4.9  
1.0  
9.2  
10.1  
260  
200  
2.5  
2.5  
-
0.8  
0.9  
-
4.0 ns  
3.8 ns  
1.0 s  
9.2 ns  
9.6 ns  
260 ns  
200 ns  
2.5 ns  
2.7 ns  
B to A  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
tt  
transition  
time  
A port  
0.7  
0.5  
10  
-
0.7  
0.4  
10  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
100  
100 Mbps  
[1] tpd is the same as tPLH and tPHL  
ten is the same as tPZL and tPZH  
tdis is the same as tPLZ and tPHZ  
tt is the same as tTHL and tTLH  
[2] Delay between OE going LOW and when the outputs are disabled.  
.
.
.
.
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
9 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 12. Dynamic characteristics for temperature range 40 C to +125 C[1]  
Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 7; for wave forms, see Figure 5 and Figure 6.  
Symbol Parameter  
Conditions  
VCC(B)  
Unit  
1.8 V 0.15 V 2.5 V 0.2 V 3.3 V 0.3 V 5.0 V 0.5 V  
Min  
Max Min Max Min Max Min Max  
VCC(A) = 1.5 V 0.1 V  
tpd  
propagation  
delay  
A to B  
1.4  
0.9  
-
15.9  
17.2  
1.0  
12.5  
18.1  
340  
220  
7.1  
6.5  
-
1.2  
0.7  
-
13.1  
15.0  
1.0  
12.5  
16.2  
280  
220  
7.1  
5.2  
-
1.1  
0.4  
-
13.0  
14.7  
1.0  
12.5  
14.9  
280  
220  
7.1  
4.8  
-
0.8  
0.3  
-
12.9 ns  
B to A  
16.7 ns  
1.0 s  
12.5 ns  
14.6 ns  
300 ns  
220 ns  
7.1 ns  
4.7 ns  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
-
-
tt  
transition  
time  
A port  
0.9  
0.9  
25  
-
0.9  
0.6  
25  
-
0.9  
0.5  
25  
-
0.9  
0.4  
25  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
40  
40  
40  
40 Mbps  
VCC(A) = 1.8 V 0.15 V  
tpd  
propagation  
delay  
A to B  
1.6  
1.5  
-
14.0  
15.0  
1.0  
11.5  
16.5  
280  
220  
6.2  
5.8  
-
1.4  
1.3  
-
10.7  
11.4  
1.0  
11.5  
14.5  
250  
220  
6.1  
5.2  
-
1.3  
1.0  
-
9.8  
10.6  
1.0  
11.5  
13.3  
250  
220  
6.1  
4.8  
-
1.2  
0.9  
-
9.5 ns  
10.1 ns  
1.0 s  
11.5 ns  
12.7 ns  
250 ns  
220 ns  
6.1 ns  
4.7 ns  
B to A  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
-
-
tt  
transition  
time  
A port  
0.8  
0.9  
22  
-
0.8  
0.6  
19  
-
0.8  
0.5  
19  
-
0.8  
0.4  
19  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
45  
55  
55  
55 Mbps  
VCC(A) = 2.5 V 0.2 V  
tpd  
propagation  
delay  
A to B  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.1  
1.2  
-
9.3  
9.6  
1.0  
9.6  
12.6  
220  
220  
5.0  
4.6  
-
1.0  
1.1  
-
8.2  
8.1  
1.0  
9.6  
11.4  
220  
220  
5.0  
4.8  
-
0.9  
0.9  
-
7.7 ns  
7.4 ns  
1.0 s  
9.6 ns  
10.8 ns  
220 ns  
220 ns  
5.0 ns  
4.7 ns  
B to A  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
-
tt  
transition  
time  
A port  
0.7  
0.7  
14  
-
0.7  
0.5  
13  
-
0.7  
0.4  
10  
-
B port  
tW  
pulse width  
data rate  
data inputs;  
-
ns  
fdata  
75  
80  
100 Mbps  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
10 of 25  
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 12. Dynamic characteristics for temperature range 40 C to +125 C[1] …continued  
Voltages are referenced to GND (ground = 0 V); for test circuit, see Figure 7; for wave forms, see Figure 5 and Figure 6.  
Symbol Parameter  
Conditions  
VCC(B)  
Unit  
1.8 V 0.15 V 2.5 V 0.2 V 3.3 V 0.3 V 5.0 V 0.5 V  
Min  
Max Min Max Min Max Min Max  
VCC(A) = 3.3 V 0.3 V  
tpd  
propagation  
delay  
A to B  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.9  
1.0  
-
7.7  
7.9  
1.0  
9.5  
10.7  
280  
220  
4.5  
4.1  
-
0.8  
0.9  
-
7.0 ns  
B to A  
6.8 ns  
1.0 s  
9.5 ns  
9.6 ns  
280 ns  
220 ns  
4.5 ns  
4.7 ns  
ten  
enable time  
OE to A, B  
[2]  
[2]  
tdis  
disable time OE to A; no external load  
1.0  
1.0  
-
1.0  
1.0  
-
OE to B; no external load  
OE to A  
OE to B  
-
-
tt  
transition  
time  
A port  
0.7  
0.5  
10  
-
0.7  
0.4  
10  
-
B port  
tW  
pulse width  
data rate  
data inputs  
-
ns  
fdata  
100  
100 Mbps  
[1] tpd is the same as tPLH and tPHL  
ten is the same as tPZL and tPZH  
.
.
tdis is the same as tPLZ and tPHZ  
.
tt is the same as tTHL and tTLH.  
[2] Delay between OE going LOW and when the outputs are disabled.  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
11 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Table 13. Typical power dissipation capacitance  
Voltages are referenced to GND (ground = 0 V).[1][2]  
Symbol Parameter  
Conditions  
VCC(A)  
1.8 V  
VCC(B)  
1.8 V  
Unit  
1.2 V  
1.8 V  
1.2 V  
5.0 V  
1.5 V  
1.8 V  
2.5 V  
2.5 V  
2.5 V  
5.0 V  
3.3 V  
3.3 V  
to  
5.0 V  
Tamb = 25 C  
CPD  
power  
dissipation  
capacitance  
outputs enabled; OE = VCC(A)  
A port: (direction A to B)  
A port: (direction B to A)  
B port: (direction A to B)  
B port: (direction B to A)  
outputs disabled; OE = GND  
A port: (direction A to B)  
A port: (direction B to A)  
B port: (direction A to B)  
B port: (direction B to A)  
5
8
5
8
5
8
5
8
5
8
5
8
5
8
pF  
pF  
pF  
pF  
18  
13  
18  
16  
18  
12  
18  
12  
18  
12  
18  
12  
18  
13  
0.12  
0.01  
0.01  
0.07  
0.12  
0.01  
0.01  
0.09  
0.04  
0.01  
0.01  
0.07  
0.05  
0.01  
0.01  
0.07  
0.08  
0.01  
0.01  
0.05  
0.08  
0.01  
0.01  
0.09  
0.07 pF  
0.01 pF  
0.01 pF  
0.09 pF  
[1] CPD is used to determine the dynamic power dissipation (PD in W).  
PD = CPD VCC2 fi N + (CL VCC2 fo) where:  
fi = input frequency in MHz;  
fo = output frequency in MHz;  
CL = load capacitance in pF;  
VCC = supply voltage in V;  
N = number of inputs switching;  
(CL VCC2 fo) = sum of the outputs.  
[2] fi = 10 MHz; VI = GND to VCC; tr = tf = 1 ns; CL = 0 pF; RL =  .  
12. Waveforms  
V
I
V
A, B input  
GND  
M
t
t
PLH  
PHL  
V
OH  
90 %  
B, A output  
V
V
M
10 %  
OL  
t
t
THL  
TLH  
001aan315  
Measurement points are given in Table 14.  
VOL and VOH are typical output voltage levels that occur with the output load.  
Fig 5. Data input (A, B) to data output (B, A) propagation delay times  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
12 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
V
I
OE input  
V
M
GND  
t
t
PLZ  
PZL  
V
CCO  
output  
V
LOW-to-OFF  
OFF-to-LOW  
M
V
X
V
OL  
t
t
PHZ  
PZH  
V
OH  
V
Y
output  
HIGH-to-OFF  
OFF-to-HIGH  
V
M
GND  
outputs  
enabled  
outputs  
disabled  
outputs  
enabled  
001aal919  
Measurement points are given in Table 14.  
OL and VOH are typical output voltage levels that occur with the output load.  
V
Fig 6. Enable and disable times  
Table 14. Measurement points[1]  
Supply voltage  
VCCO  
Input  
Output  
VM  
VM  
VX  
VY  
1.2 V  
0.5 VCCI  
0.5 VCCI  
0.5 VCCI  
0.5 VCCI  
0.5 VCCI  
0.5 VCCI  
0.5 VCCO  
0.5 VCCO  
0.5 VCCO  
0.5 VCCO  
0.5 VCCO  
0.5 VCCO  
VOL + 0.1 V  
VOL + 0.1 V  
VOL + 0.15 V  
VOL + 0.15 V  
VOL + 0.3 V  
VOL + 0.3 V  
VOH 0.1 V  
VOH 0.1 V  
VOH 0.15 V  
VOH 0.15 V  
VOH 0.3 V  
VOH 0.3 V  
1.5 V 0.1 V  
1.8 V 0.15 V  
2.5 V 0.2 V  
3.3 V 0.3 V  
5.0 V 0.5 V  
[1] VCCI is the supply voltage associated with the input and VCCO is the supply voltage associated with the output.  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
13 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
t
W
V
I
90 %  
negative  
pulse  
V
V
V
M
M
10 %  
0 V  
t
t
r
f
t
t
f
r
V
I
90 %  
positive  
pulse  
V
M
M
10 %  
0 V  
t
W
V
EXT  
V
CC  
R
L
V
V
O
I
G
DUT  
C
L
R
L
001aal920  
Test data is given in Table 15.  
All input pulses are supplied by generators having the following characteristics: PRR 10 MHz; ZO = 50 ; dV/dt 1.0 V/ns.  
RL = Load resistance.  
CL = Load capacitance including jig and probe capacitance.  
V
EXT = External voltage for measuring switching times.  
Fig 7. Test circuit for measuring switching times  
Table 15. Test data  
Supply voltage  
VCC(A) VCC(B)  
Input  
VI[1]  
Load  
CL  
VEXT  
[2]  
[3]  
t/V  
RL  
tPLH, tPHL tPZH, tPHZ tPZL, tPLZ  
1.2 V to 3.6 V 1.65 V to 5.5 V VCCI  
1.0 ns/V  
15 pF  
50 k, 1 Mopen  
open  
2 VCCO  
[1] VCCI is the supply voltage associated with the input.  
[2] For measuring data rate, pulse width, propagation delay and output rise and fall measurements, RL = 1 M. For measuring enable and  
disable times, RL = 50 k.  
[3] VCCO is the supply voltage associated with the output.  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
14 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
13. Application information  
13.1 Applications  
Voltage level-translation applications. The NTB0101 can be used to interface between  
devices or systems operating at different supply voltages. See Figure 8 for a typical  
operating circuit using the NTB0101.  
1.8 V  
3.3 V  
1.8 V  
V
V
3.3 V  
CC(A)  
CC(B)  
0.1 μF  
0.1 μF  
OE  
SYSTEM  
CONTROLLER  
NTB0101  
SYSTEM  
DATA  
A
B
DATA  
GND  
001aan316  
Fig 8. Typical operating circuit  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
15 of 25  
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
13.2 Architecture  
The architecture of the NTB0101 is shown in Figure 9. The device does not require an  
extra input signal to control the direction of data flow from A to B or from B to A. In a static  
state, the output drivers of the NTB0101 can maintain a defined output level. However, the  
design of the output architecture is intentionally weak. The design is so that when data on  
the bus starts flowing in the opposite direction, an external driver can overdrive them. The  
output of one-shot circuits detect rising or falling edges on the A or B ports. During a rising  
edge, the one-shot circuits turn on the PMOS transistors (T1, T3) for a short duration,  
accelerating the LOW-to-HIGH transition. Similarly, during a falling edge, the one-shot  
circuits turn on the NMOS transistors (T2, T4) for a short duration, accelerating the  
HIGH-to-LOW transition. During output transitions, the typical output impedance is 70 at  
V
CCO = 1.2 V to 1.8 V. It is 50 at VCCO = 1.8 V to 3.3 V, and 40 at VCCO = 3.3 V to  
5.0 V.  
V
V
CC(B)  
CC(A)  
ONE  
SHOT  
T1  
4 kΩ  
T2  
ONE  
SHOT  
B
A
ONE  
SHOT  
T3  
4 kΩ  
T4  
ONE  
SHOT  
001aal921  
Fig 9. Architecture of NTB0101 I/O cell  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
16 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
13.3 Input driver requirements  
For correct operation, the device that drives the data I/Os of the NTB0101 must have a  
minimum drive capability of 2 mA. See Figure 10 for a plot of typical input current versus  
input voltage.  
I
I
V /4 kΩ  
T
V
I
−(V − V )/4 kΩ  
D
T
001aal922  
VT: input threshold voltage of the NTB0101 (typically VCCI / 2).  
VD: supply voltage of the external driver.  
Fig 10. Typical input current versus input voltage graph  
13.4 Power-up  
During operation, VCC(A) must never exceed VCC(B). However, during power-up,  
VCC(A) VCC(B) does not damage the device, so either power supply can be ramped up  
first. There is no special power-up sequencing required. The NTB0101 includes circuitry  
that disables all output ports when either VCC(A) or VCC(B) is switched off.  
13.5 Enable and disable  
An output enable input (OE) is used to disable the device. Setting OE = LOW causes all  
I/Os to assume the high-impedance OFF-state. The disable time (tdis with no external  
load) indicates the delay between when OE goes LOW and when outputs actually  
become disabled. The enable time (ten) indicates the amount of time the user must allow  
for one one-shot circuitry to become operational after OE is taken HIGH. To ensure the  
high-impedance OFF-state during power-up or power-down, pin OE should be tied to  
GND through a pull-down resistor. The current-sourcing capability of the driver determines  
the minimum value of the resistor.  
13.6 Pull-up or pull-down resistors on I/O lines  
As mentioned previously the NTB0101 is designed with low static drive strength to drive  
capacitive loads of up to 70 pF. To avoid output contention issues, any pull-up or  
pull-down resistors used must be above 50 k. For this reason, the NTB0101 is not  
recommended for use in open-drain driver applications such as 1-Wire or I2C-bus. For  
these applications, the NTS0101 level translator is recommended.  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
17 of 25  
 
 
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
14. Package outline  
3ODVWLFꢀVXUIDFHꢇPRXQWHGꢀSDFNDJHꢈꢀꢆꢀOHDGV  
627ꢂꢆꢂ  
'
%
(
$
;
\
+
Y
0
$
(
ꢆ
ꢅ
ꢄ
4
SLQꢀꢅꢀ  
LQGH[  
$
$
ꢅ
ꢁ
ꢃ
ꢂ
F
H
ꢅ
E
/
Z
0 %  
S
S
H
GHWDLOꢀ;  
ꢆ
ꢅ
ꢇꢀPP  
VFDOH  
',0(16,216ꢀꢉPPꢀDUHꢀWKHꢀRULJLQDOꢀGLPHQVLRQVꢊ  
$
PD[  
ꢁꢀ  
81,7  
$
E
S
F
'
H
H
+
/
4
Y
Z
\
(
S
ꢁ
(
ꢆꢈꢁꢆꢀ  
ꢆꢈꢇꢆ  
ꢅꢈꢅꢀ  
ꢆꢈꢄ  
ꢆꢈꢇꢉꢀ  
ꢆꢈꢅꢆ  
ꢇꢈꢇꢀ  
ꢅꢈꢄ  
ꢅꢈꢁꢉꢀ  
ꢅꢈꢅꢉ  
ꢇꢈꢇꢀ  
ꢇꢈꢆ  
ꢆꢈꢊꢉꢀ ꢆꢈꢇꢉꢀ  
ꢆꢈꢅꢉ ꢆꢈꢅꢉ  
PP  
ꢆꢈꢅ  
ꢅꢈꢁ  
ꢆꢈꢂꢉ  
ꢆꢈꢇ  
ꢆꢈꢇ  
ꢆꢈꢅ  
ꢀ5()(5(1&(6  
ꢀ-('(& ꢀ-(,7$  
6&ꢃꢄꢄ  
(8523($1ꢀ  
352-(&7,21  
287/,1(ꢀ  
9(56,21  
,668(ꢀ'$7(  
ꢀ,(&  
ꢆꢊꢃꢅꢅꢃꢆꢄꢀ  
ꢆꢂꢃꢆꢁꢃꢅꢂ  
ꢀ627ꢁꢂꢁ  
ꢀ
Fig 11. Package outline SOT363 (SC-88)  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
18 of 25  
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
;621ꢂꢏꢀSODVWLFꢀH[WUHPHO\ꢀWKLQꢀVPDOOꢀRXWOLQHꢀSDFNDJHꢐꢀQRꢀOHDGVꢐꢀꢂꢀWHUPLQDOVꢐꢀERG\ꢀꢅꢀ[ꢀꢅꢈꢊꢉꢀ[ꢀꢆꢈꢉꢀPP  
E
627ꢄꢄꢂ  
ꢅ
ꢇ
ꢁ
ꢊ[  
ꢍꢇꢎ  
/
/
ꢅ
H
ꢂ
ꢉ
ꢊ
H
H
ꢅ
ꢅ
ꢂ[  
ꢍꢇꢎ  
$
$
ꢅ
'
(
WHUPLQDOꢀꢅ  
LQGH[ꢀDUHD  
ꢆ
ꢅ
ꢇꢀPP  
VFDOH  
'LPHQVLRQVꢀꢍPPꢀDUHꢀWKHꢀRULJLQDOꢀGLPHQVLRQVꢎ  
ꢍꢅꢎ  
8QLW  
$
$
E
'
(
H
H
/
/
ꢅ
ꢅ
ꢅ
PD[ ꢆꢈꢉ ꢆꢈꢆꢊ ꢆꢈꢇꢉ ꢅꢈꢉꢆ ꢅꢈꢆꢉ  
ꢆꢈꢁꢉ ꢆꢈꢊꢆ  
ꢆꢈꢁꢆ ꢆꢈꢁꢉ  
ꢆꢈꢇꢋ ꢆꢈꢁꢇ  
QRP  
PLQ  
ꢆꢈꢇꢆ ꢅꢈꢊꢉ ꢅꢈꢆꢆ ꢆꢈꢂ  
ꢆꢈꢅꢋ ꢅꢈꢊꢆ ꢆꢈꢌꢉ  
PP  
ꢆꢈꢉ  
1RWHV  
ꢅꢈꢀ,QFOXGLQJꢀSODWLQJꢀWKLFNQHVVꢈ  
ꢇꢈꢀ&DQꢀEHꢀYLVLEOHꢀLQꢀVRPHꢀPDQXIDFWXULQJꢀSURFHVVHVꢈ  
VRWꢀꢀꢁBSR  
5HIHUHQFHV  
2XWOLQH  
(XURSHDQ  
SURMHFWLRQ  
,VVXHꢀGDWH  
YHUVLRQ  
,(&  
-('(&  
02ꢃꢇꢉꢇ  
-(,7$  
ꢆꢊꢃꢆꢋꢃꢇꢇ  
ꢅꢇꢃꢆꢅꢃꢆꢉ  
627ꢄꢄꢂ  
Fig 12. Package outline SOT886 (XSON6)  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
19 of 25  
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
;621ꢆꢍꢀSODVWLFꢀH[WUHPHO\ꢀWKLQꢀVPDOOꢀRXWOLQHꢀSDFNDJHꢈꢀQRꢀOHDGVꢈꢀꢆꢀWHUPLQDOVꢈꢀERG\ꢀꢁꢀ[ꢀꢁꢀ[ꢀꢎꢏꢅꢀPP  
627ꢋꢌꢁ  
E
ꢂ
ꢁ
ꢃ
ꢊîꢀ  
ꢍꢅꢎ  
/
/
ꢅ
H
ꢆ
ꢅ
ꢄ
H
ꢅ
H
ꢅ
ꢂîꢀ  
ꢍꢅꢎ  
$
$
ꢅ
'
(
WHUPLQDOꢀꢅꢀ  
LQGH[ꢀDUHD  
ꢆ
ꢅ
ꢇꢀPP  
VFDOH  
',0(16,216ꢀꢉPPꢀDUHꢀWKHꢀRULJLQDOꢀGLPHQVLRQVꢊ  
ꢀ
$
$
ꢁꢀ  
81,7  
E
'
(
H
H
/
/
ꢁ
ꢁ
PD[ PD[  
ꢆꢈꢇꢆꢀ ꢅꢈꢆꢉꢀ ꢅꢈꢆꢉꢀ  
ꢆꢈꢅꢇ ꢆꢈꢌꢉ ꢆꢈꢌꢉ  
ꢆꢈꢁꢉꢀ ꢆꢈꢊꢆꢀ  
ꢆꢈꢇꢋ ꢆꢈꢁꢇ  
PP  
ꢆꢈꢉ ꢆꢈꢆꢊ  
ꢆꢈꢉꢉ  
ꢆꢈꢁꢉ  
1RWHꢀ  
ꢅꢈꢀ&DQꢀEHꢀYLVLEOHꢀLQꢀVRPHꢀPDQXIDFWXULQJꢀSURFHVVHVꢈ  
5()(5(1&(6  
-('(& -(,7$  
287/,1(ꢀ  
9(56,21  
(8523($1ꢀ  
352-(&7,21  
,668(ꢀ'$7(  
,(&  
ꢆꢉꢃꢆꢊꢃꢆꢂꢀ  
ꢆꢋꢃꢆꢉꢃꢅꢉ  
627ꢄꢌꢅ  
ꢀ
ꢀ
Fig 13. Package outline SOT891 (XSON6)  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
20 of 25  
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
;621ꢆꢍꢀH[WUHPHO\ꢀWKLQꢀVPDOOꢀRXWOLQHꢀSDFNDJHꢈꢀQRꢀOHDGVꢈꢀ  
ꢆꢀWHUPLQDOVꢈꢀERG\ꢀꢁꢏꢎꢀ[ꢀꢁꢏꢎꢀ[ꢀꢎꢏꢂꢅꢀPP  
627ꢁꢃꢎꢃ  
E
ꢁ
ꢍꢇꢎ  
ꢅ
ꢇ
ꢍꢊîꢎ  
/
/
ꢅ
H
ꢂ
ꢉ
ꢊ
H
H
ꢅ
ꢅ
ꢍꢇꢎ  
ꢍꢂîꢎ  
$
ꢅ
$
'
(
WHUPLQDOꢀꢅꢀ  
LQGH[ꢀDUHD  
ꢆ
/
ꢆꢈꢉ  
ꢅꢀPP  
VFDOH  
'LPHQVLRQV  
8QLW  
ꢍꢅꢎ  
$
$
E
'
(
H
H
ꢅ
/
ꢅ
ꢅ
PD[ꢀ ꢆꢈꢁꢉ ꢆꢈꢆꢊ ꢆꢈꢇꢆꢀ ꢅꢈꢆꢉꢀ ꢅꢈꢆꢉꢀ  
ꢆꢈꢁꢉꢀ ꢆꢈꢊꢆꢀ  
ꢆꢈꢅꢉꢀ ꢅꢈꢆꢆꢀ ꢅꢈꢆꢆꢀ ꢆꢈꢉꢉ ꢆꢈꢁꢉ ꢆꢈꢁꢆꢀ ꢆꢈꢁꢉꢀ  
ꢆꢈꢅꢇ ꢆꢈꢌꢉ ꢆꢈꢌꢉ ꢆꢈꢇꢋ ꢆꢈꢁꢇ  
PP QRPꢀ  
PLQ  
1RWHꢀ  
ꢅꢈꢀ,QFOXGLQJꢀSODWLQJꢀWKLFNQHVVꢈꢀ  
ꢇꢈꢀ9LVLEOHꢀGHSHQGLQJꢀXSRQꢀXVHGꢀPDQXIDFWXULQJꢀWHFKQRORJ\ꢈ  
VRWꢂꢃꢄꢃBSR  
5HIHUHQFHV  
2XWOLQHꢀ  
YHUVLRQ  
(XURSHDQꢀ  
SURMHFWLRQ  
,VVXHꢀGDWH  
,(&  
ꢀ
-('(&  
ꢀ
-(,7$  
ꢅꢆꢃꢆꢊꢃꢆꢇꢀ  
ꢅꢆꢃꢆꢊꢃꢆꢂ  
627ꢅꢇꢆꢇ  
ꢀ
Fig 14. Package outline SOT1202 (XSON6)  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
21 of 25  
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
15. Abbreviations  
Table 16. Abbreviations  
Acronym  
CDM  
Description  
Charged Device Model  
DUT  
Device Under Test  
ESD  
ElectroStatic Discharge  
Human Body Model  
HBM  
MM  
Machine Model  
NMOS  
PMOS  
PRR  
N-type Metal Oxide Semiconductor  
P-type Metal Oxide Semiconductor  
Pulse Repetition Rate  
16. Revision history  
Table 17. Revision history  
Document ID  
NTB0101 v.5  
Modifications:  
Release date  
20160224  
Data sheet status  
Change notice  
Supersedes  
Product data sheet  
-
NTB0101 v.4  
• Type number NTB0101GV is deleted.  
• The template is updated to the latest version.  
NTB0101 v.4  
Modifications:  
NTB0101 v.3  
Modifications:  
NTB0101 v.2  
NTB0101 v.1  
20120806  
Product data sheet  
-
NTB0101 v.3  
NTB0101 v.2  
• Package outline drawing of SOT886 (Figure 12) modified.  
20111110  
Product data sheet  
-
• Legal pages updated.  
20110505  
20101230  
Product data sheet  
Product data sheet  
-
-
NTB0101 v.1  
-
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
22 of 25  
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
17. Legal information  
17.1 Data sheet status  
Document status[1][2]  
Product status[3]  
Development  
Definition  
Objective [short] data sheet  
This document contains data from the objective specification for product development.  
This document contains data from the preliminary specification.  
This document contains the product specification.  
Preliminary [short] data sheet Qualification  
Product [short] data sheet Production  
[1]  
[2]  
[3]  
Please consult the most recently issued document before initiating or completing a design.  
The term ‘short data sheet’ is explained in section “Definitions”.  
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status  
information is available on the Internet at URL http://www.nxp.com.  
Suitability for use — NXP Semiconductors products are not designed,  
17.2 Definitions  
authorized or warranted to be suitable for use in life support, life-critical or  
safety-critical systems or equipment, nor in applications where failure or  
malfunction of an NXP Semiconductors product can reasonably be expected  
to result in personal injury, death or severe property or environmental  
damage. NXP Semiconductors and its suppliers accept no liability for  
inclusion and/or use of NXP Semiconductors products in such equipment or  
applications and therefore such inclusion and/or use is at the customer’s own  
risk.  
Draft — The document is a draft version only. The content is still under  
internal review and subject to formal approval, which may result in  
modifications or additions. NXP Semiconductors does not give any  
representations or warranties as to the accuracy or completeness of  
information included herein and shall have no liability for the consequences of  
use of such information.  
Short data sheet — A short data sheet is an extract from a full data sheet  
with the same product type number(s) and title. A short data sheet is intended  
for quick reference only and should not be relied upon to contain detailed and  
full information. For detailed and full information see the relevant full data  
sheet, which is available on request via the local NXP Semiconductors sales  
office. In case of any inconsistency or conflict with the short data sheet, the  
full data sheet shall prevail.  
Applications — Applications that are described herein for any of these  
products are for illustrative purposes only. NXP Semiconductors makes no  
representation or warranty that such applications will be suitable for the  
specified use without further testing or modification.  
Customers are responsible for the design and operation of their applications  
and products using NXP Semiconductors products, and NXP Semiconductors  
accepts no liability for any assistance with applications or customer product  
design. It is customer’s sole responsibility to determine whether the NXP  
Semiconductors product is suitable and fit for the customer’s applications and  
products planned, as well as for the planned application and use of  
customer’s third party customer(s). Customers should provide appropriate  
design and operating safeguards to minimize the risks associated with their  
applications and products.  
Product specification — The information and data provided in a Product  
data sheet shall define the specification of the product as agreed between  
NXP Semiconductors and its customer, unless NXP Semiconductors and  
customer have explicitly agreed otherwise in writing. In no event however,  
shall an agreement be valid in which the NXP Semiconductors product is  
deemed to offer functions and qualities beyond those described in the  
Product data sheet.  
NXP Semiconductors does not accept any liability related to any default,  
damage, costs or problem which is based on any weakness or default in the  
customer’s applications or products, or the application or use by customer’s  
third party customer(s). Customer is responsible for doing all necessary  
testing for the customer’s applications and products using NXP  
Semiconductors products in order to avoid a default of the applications and  
the products or of the application or use by customer’s third party  
customer(s). NXP does not accept any liability in this respect.  
17.3 Disclaimers  
Limited warranty and liability — Information in this document is believed to  
be accurate and reliable. However, NXP Semiconductors does not give any  
representations or warranties, expressed or implied, as to the accuracy or  
completeness of such information and shall have no liability for the  
consequences of use of such information. NXP Semiconductors takes no  
responsibility for the content in this document if provided by an information  
source outside of NXP Semiconductors.  
Limiting values — Stress above one or more limiting values (as defined in  
the Absolute Maximum Ratings System of IEC 60134) will cause permanent  
damage to the device. Limiting values are stress ratings only and (proper)  
operation of the device at these or any other conditions above those given in  
the Recommended operating conditions section (if present) or the  
Characteristics sections of this document is not warranted. Constant or  
repeated exposure to limiting values will permanently and irreversibly affect  
the quality and reliability of the device.  
In no event shall NXP Semiconductors be liable for any indirect, incidental,  
punitive, special or consequential damages (including - without limitation - lost  
profits, lost savings, business interruption, costs related to the removal or  
replacement of any products or rework charges) whether or not such  
damages are based on tort (including negligence), warranty, breach of  
contract or any other legal theory.  
Terms and conditions of commercial sale — NXP Semiconductors  
products are sold subject to the general terms and conditions of commercial  
sale, as published at http://www.nxp.com/profile/terms, unless otherwise  
agreed in a valid written individual agreement. In case an individual  
agreement is concluded only the terms and conditions of the respective  
agreement shall apply. NXP Semiconductors hereby expressly objects to  
applying the customer’s general terms and conditions with regard to the  
purchase of NXP Semiconductors products by customer.  
Notwithstanding any damages that customer might incur for any reason  
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards  
customer for the products described herein shall be limited in accordance  
with the Terms and conditions of commercial sale of NXP Semiconductors.  
Right to make changes — NXP Semiconductors reserves the right to make  
changes to information published in this document, including without  
limitation specifications and product descriptions, at any time and without  
notice. This document supersedes and replaces all information supplied prior  
to the publication hereof.  
No offer to sell or license — Nothing in this document may be interpreted or  
construed as an offer to sell products that is open for acceptance or the grant,  
conveyance or implication of any license under any copyrights, patents or  
other industrial or intellectual property rights.  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
23 of 25  
 
 
 
 
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
Export control — This document as well as the item(s) described herein  
may be subject to export control regulations. Export might require a prior  
authorization from competent authorities.  
NXP Semiconductors’ specifications such use shall be solely at customer’s  
own risk, and (c) customer fully indemnifies NXP Semiconductors for any  
liability, damages or failed product claims resulting from customer design and  
use of the product for automotive applications beyond NXP Semiconductors’  
standard warranty and NXP Semiconductors’ product specifications.  
Non-automotive qualified products — Unless this data sheet expressly  
states that this specific NXP Semiconductors product is automotive qualified,  
the product is not suitable for automotive use. It is neither qualified nor tested  
in accordance with automotive testing or application requirements. NXP  
Semiconductors accepts no liability for inclusion and/or use of  
Translations — A non-English (translated) version of a document is for  
reference only. The English version shall prevail in case of any discrepancy  
between the translated and English versions.  
non-automotive qualified products in automotive equipment or applications.  
In the event that customer uses the product for design-in and use in  
automotive applications to automotive specifications and standards, customer  
(a) shall use the product without NXP Semiconductors’ warranty of the  
product for such automotive applications, use and specifications, and (b)  
whenever customer uses the product for automotive applications beyond  
17.4 Trademarks  
Notice: All referenced brands, product names, service names and trademarks  
are the property of their respective owners.  
18. Contact information  
For more information, please visit: http://www.nxp.com  
For sales office addresses, please send an email to: salesaddresses@nxp.com  
NTB0101  
All information provided in this document is subject to legal disclaimers.  
© NXP Semiconductors N.V. 2016. All rights reserved.  
Product data sheet  
Rev. 5 — 24 February 2016  
24 of 25  
 
 
NTB0101  
NXP Semiconductors  
Dual supply translating transceiver; auto direction sensing; 3-state  
19. Contents  
1
2
3
4
5
General description. . . . . . . . . . . . . . . . . . . . . . 1  
Features and benefits . . . . . . . . . . . . . . . . . . . . 1  
Ordering information. . . . . . . . . . . . . . . . . . . . . 2  
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2  
6
6.1  
6.2  
Pinning information. . . . . . . . . . . . . . . . . . . . . . 3  
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3  
7
Functional description . . . . . . . . . . . . . . . . . . . 3  
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Recommended operating conditions. . . . . . . . 4  
Static characteristics. . . . . . . . . . . . . . . . . . . . . 5  
Dynamic characteristics . . . . . . . . . . . . . . . . . . 7  
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
8
9
10  
11  
12  
13  
Application information. . . . . . . . . . . . . . . . . . 15  
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Input driver requirements . . . . . . . . . . . . . . . . 17  
Power-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Enable and disable. . . . . . . . . . . . . . . . . . . . . 17  
Pull-up or pull-down resistors on I/O lines . . . 17  
13.1  
13.2  
13.3  
13.4  
13.5  
13.6  
14  
15  
16  
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 18  
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Revision history. . . . . . . . . . . . . . . . . . . . . . . . 22  
17  
Legal information. . . . . . . . . . . . . . . . . . . . . . . 23  
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 23  
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
17.1  
17.2  
17.3  
17.4  
18  
19  
Contact information. . . . . . . . . . . . . . . . . . . . . 24  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Please be aware that important notices concerning this document and the product(s)  
described herein, have been included in section ‘Legal information’.  
© NXP Semiconductors N.V. 2016.  
All rights reserved.  
For more information, please visit: http://www.nxp.com  
For sales office addresses, please send an email to: salesaddresses@nxp.com  
Date of release: 24 February 2016  
Document identifier: NTB0101  
 

相关型号：

NTB0101GW

 LINE TRANSCEIVER, PDSO6, PLASTIC, SOT-363, SC-88, 6 PIN
NXP

NTB0101GW,125

 NTB0101 - Dual supply translating transceiver; auto direction sensing; 3-state TSSOP 6-Pin
NXP

NTB0102

 Dual supply translating transceiver; auto direction sensing ; 3-state
NXP

NTB0102DP

 Dual supply translating transceiver; auto direction sensing ; 3-state
NXP

NTB0102DP,125

 NTB0102 - Dual supply translating transceiver; auto direction sensing; 3-state TSSOP 8-Pin
NXP

NTB0102DP-Q100H

 NTB0102-Q100 - Dual supply translating transceiver; auto direction sensing; 3-state TSSOP 8-Pin
NXP

NTB0102GD

 Dual supply translating transceiver; auto direction sensing ; 3-state
NXP

NTB0102GD-Q100

 LINE TRANSCEIVER
NXP

NTB0102GD-Q100H

 NTB0102-Q100 - Dual supply translating transceiver; auto direction sensing; 3-state SON 8-Pin
NXP

NTB0102GF

 Dual supply translating transceiver; auto direction sensing ; 3-state
NXP

NTB0102GF,115

 NTB0102 - Dual supply translating transceiver; auto direction sensing; 3-state SON 8-Pin
NXP

NTB0102GT

 Dual supply translating transceiver; auto direction sensing ; 3-state
NXP
©2020 ICPDF网 联系我们和版权申明