P60D080PX0 [NXP]
IC SPECIALTY MICROPROCESSOR CIRCUIT, UUC, SOT658-3, Microprocessor IC:Other;型号: | P60D080PX0 |
厂家: | NXP |
描述: | IC SPECIALTY MICROPROCESSOR CIRCUIT, UUC, SOT658-3, Microprocessor IC:Other 外围集成电路 |
文件: | 总12页 (文件大小:88K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SmartMX2 family
P60D080 and P60D144
Secure high-performance dual interface smart card controller
Rev. 1 — 1 September 2010
197210
Objective short data sheet
PUBLIC
1. Introduction
The new NXP Semiconductors SmartMX2 P60 family was created in order to cover all
important market requests for state-of-the-art security chip controllers:
• Innovative and unique security measures, Common Criteria certified
• Superior transaction and personalization time
• Broadest portfolio of memory configurations with contact, dual-interface and
contactless on a single platform
• Proven SmartMX reliability, interoperability and RF excellence for shortest
time-to-market
• Market benchmark in view of cost-performance ratio
Further feature improvements in comparison to the existing approved SmartMX P5 family:
• Significant increases in controller and crypto performance
• Further extended CPU instructions for Java and C code
• Comprehensive hardware support for efficient and secure OS implementation
• Highest transaction and personalization speed
• Excellent power efficiency
• New-generation Fame2 crypto coprocessor for RSA/ECC
• New-generation Symmetric Block Cipher (SBC) crypto coprocessor for DES/AES
• Advanced 90 nm CMOS technology
Other important SmartMX2 P60 differentiators in the market are:
• Optional implementation of MIFARE Plus and MIFARE DESFire EV1 functionality to
enable easy coverage of application convergence
• New development tool suite, totally revised and based on an optimized
close-to-product true bond-out chip emulation approach
• Broadest portfolio of certified package variations
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
2. General description
The P60D080 and P60D144 devices are members of the new SmartMX2 Family and offer
with their two different EEPROM size variations a common set of functional blocks and
interfaces, supporting high-performance, high-security contact, dual-interface and
contactless applications. Figure 1 shows the block diagram of the modular controller
architecture consisting of the following blocks and features:
• SmartMX2 CPU with enhanced application instruction set supporting 32-/24-/16-/8-bit
move, logical and arithmetic functions
• Fame2 coprocessor based on innovative power-efficient and fast architecture for
optimized RSA/ECC cryptography
• SBC coprocessor interface with multiple data/key register sets now supporting both
AES and Triple-DES
• ISO/IEC 7816 data transfer improved with enhanced protocol support for T=0 and
T=1 protocols
• ISO/IEC 14443 Type A contactless interface unit optimized also for small antenna
dimensions
• Fully concurrent operation of contact and contactless communication
• New Copy Machines supporting direct memory access (DMA) to memories and all
SFRs
• Cyclic Redundancy Check (CRC) coprocessors 16-bit/32-bit
• Memory Management Unit (MMU) with 16 cache segments
• New security features especially targeting combined laser light attacks and integrity of
code execution and data fetch
• Development tool suite based on approved suppliers Keil and Ashling
– μVision4 user interface
– New and high-performance emulation hardware “SmartICE series”
• High-memory SoftMasking DIF device for code development purposes
• Common Criteria security certified high-performance crypto library supporting various
algorithms
• Consequent family concept with regard to all future platforms of the P60 family
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
2 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
3. Features and benefits
3.1 Product specific features
EEPROM: choice of 80 KB or 144 KB
Data retention time: 25 years minimum
Endurance: 500000 cycles
Versatile EEPROM programming: 1 B to 256 B at a time
ROM: 384 KB
RAM: 8.125 KB (8320 B)
5632 B CXRAM (including 256 B IRAM) usable for CPU
2688 B FXRAM usable for Fame2 or CPU
SmartMX2 CPU
orthogonal instruction set offering 32-/24-/16-/8-bit instructions optimized for
secured and low power smart card applications
Enhanced high-performance secured Public Key Infrastructure (PKI) coprocessor
(RSA, ECC) Fame2
Enhanced high-performance secured hardware support for symmetric block cipher
(SBC) algorithms
Secured dual/triple-DES coprocessor
Secured AES coprocessor
Multiple key and data register sets supporting parallel data/key loading and
calculation
True Random Number Generator (compliant to AIS-31)
16-bit and 32-bit CRC coprocessor supporting fast memory verify functionality
Memory Management Unit (MMU)
16 segment cache entries and performance improvements
supporting integral concept for secure code fetch and execution
Copy Machines offering data transfer between all Special Function Registers and all
memory instances without CPU interaction
Watchdog Timer supporting secure code execution
Time Stamp Counter, Real Time Clock
ISO/IEC 7816 contact interface (UART) and ISO/IEC 14443A Contactless Interface
Unit (CIU)
ISO/IEC 7816 contact interface (UART) offering hardware support
for ISO/IEC 7816 T=0 and T=1 protocol stack implementation
ISO/IEC 14443A Contactless Interface Unit (CIU) supporting data rates of 106
kbit/s, 212 kbit/s, 424 kbit/s, 848 kbit/s and offering hardware support for
ISO/IEC 14443 T=CL protocol stack implementation
Hardware support for automatic WTX generation for both ISO/IEC 7816 UART and
ISO/IEC 14443 CIU
support of concurrent operation of both ISO/IEC 7816 and ISO/IEC 14443 interface
continuos operation from 1.62 V up to 5.5 V supported
−25 °C to +85 °C ambient temperature
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
3 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
3.2 Security features
Outstanding Glue Logic chip layout approach:
Most efficient and proven protection against reverse engineering
Based on avoidance of any logical layout block recognition
Secure Fetch (Code and Data)
Active and dynamic shielding
Enhanced security sensors:
Low and high clock frequency sensor
Low and high temperature sensor
Low and high supply voltage sensor
Single Fault Injection (SFI) attack detection
Light sensors (included integrated memory light sensor functionality)
Electronic fuses for safeguarded mode control
Clock input filter for protection against spikes
Power-up and power-down reset
Memory security (encryption and physical measures) for RAM, EEPROM and ROM
Memory Management Unit (MMU) including memory protection:
Secure multi application operating systems via two different operation modes:
System mode and User mode
OS controlled access restriction mechanism to peripherals in User mode
Memory mapping up to 8-MB code memory
Memory mapping up to 8-MB data memory
Built-in integral concept for secure code execution covering code fetch, MMU and CPU
Optional disabling of ROM read instructions by code executed in EEPROM
Optional disabling of any code execution out of RAM
Optional Unique ID for each die
Optional programmable card disable feature
EEPROM programming:
Hardware sequencer controlled
Enhanced error correction mechanism
128-B or 264-B EEPROM for customer-defined Security FabKey:
Featuring batch, wafer or die-individual security data
Encrypted diversification features available on request
14 B user write protected security area in EEPROM (byte access, inhibit functionality
per byte)
32 B write once protected security area in EEPROM (bit access)
32 B user read only protected security area in EEPROM (byte access)
Total useable EEPROM for customer OS (including optional FabKey areas) and
excluding the MIFARE Plus and DESFire EV1 implementations
P60D080: 81408 bytes + above 78 bytes within protected security area
P60D144: 146944 bytes + above 78 bytes within protected security area
Customer specific EEPROM initialization available
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
4 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
4. Applications
E-passports
ID cards
Health cards
Electronic driving licences
Contact and contactless banking
Digital Signature
Conditional Access (Pay TV)
High-security access management
Authentication
Trusted platform modules
Multi-application cards
5. Quick reference data
Table 1.
Symbol
VDD
Quick reference data
Parameter
Conditions [1]
Min
4.5
Typ
5.0
3.0
1.8
Max
5.5
Unit
V
supply voltage
Class A: 5 V range
Class B: 3 V range
Class C: 1.8 V range
2.7
3.3
V
1.62
1.98
V
[1] Remark: continuos operation from 1.62 V up to 5.5 V supported
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
5 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
6. Ordering information
Table 2.
Feature table (EEPROM and RAM sizes without applied implementation of MIFARE Plus and/or
DESFire EV1)
Product EEPROM user total CXRAM FXRAM
Coprocessor
MMU
Copy
ISO/
interface
type
[KB]
ROM RAM
[KB] [KB]
[KB]
[KB]
machines IEC 7816 option
IO pads
Fame2 DES AES
P60D080
P60D144
80
384
8.125
5.5
5.5
2.625
2.625
yes
yes
yes
yes
yes
yes
yes
yes
2
3
ISO/IEC 7816 +
ISO/IEC 14443
144
384
8.125
2
3
ISO/IEC 7816 +
ISO/IEC 14443
Table 3.
Ordering information
Type number
Package
Name
FFC
Description
Version
P60D080PU15
P60D144PU15
P60D080PU75
P60D144PU75
P60D080PA4
P60D144PA4
P60D080PA6
P60D144PA6
P60D080PX1
P60D144PX1
P60D080PX0
P60D144PX0
P60D080PX30
P60D144PX30
12 inch wafer (sawn; 150 μm thickness; on film frame carrier;
electronic fail die marking according to SECSII format)
NAU000
FFC
12 inch wafer (sawn; 75 μm thickness; on film frame carrier;
electronic fail die marking according to SECSII format)
NAU000
MOB4
contactless chip card module (super 35 mm tape format, module
thickness 320 μm)
SOT500-2
SOT500-3
SOT658-3
SOT658-3
MOB6
contactless chip card module (super 35 mm tape format, module
thickness 250 μm)
PDM1.1
PDM1.1
Pd-PDM1.1
dual interface chip card module (Plug-in type; super 35 mm tape
format, 8-contact)
dual interface chip card module (super 35 mm tape format,
8-contact)
palladium plated dual interface chip card module (super 35 mm tape SOT658-3
format, 8-contact)
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
6 of 12
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
7. Functional diagram
P60D080 P60D144
LA
LB
ROM
EEPROM
RAM
RF
CIU
ISO 14443
INTERFACE
5632 B
80 KB/144 KB
DATA AND PROGRAM
MEMORY
DATA MEMORY
384 KB
PROGRAM MEMORY
IO1
IO2
IO3
2688 B
DATA MEMORY
PROGRAMMABLE
I/O 1, 2, 3
UART
ISO 7816
MEMORY MANAGEMENT UNIT (MMU)
COPY
MACHINE
COPY
MACHINE
FAME2
ENHANCED
PUBLIC KEY
CLOCK
FILTER
CLOCK
GENERATION
CLK
SECURE SmartMX2 CPU
COPROCESSOR
e.g. RSA, ECC
SYMMETRIC BLOCK CIPHER
INTERFACE
TIMERS
SECURITY SENSORS
RESET GENERATION
RST_N
FAST
RNG
WATCHDOG
TIMER
CRC
16 or 32-bit
TRIPLE-DES
COPROCESSOR
AES
COPROCESSOR
16-bit 16-bit
T0
T1
VOLTAGE REGULATOR
VDD
VSS
001aam548
Fig 1. Functional diagram P60D080/P60D144
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
8. Abbreviations
Table 4.
Abbreviations
Description
Acronym
AES
Advanced Encryption Standard
Digital Encryption Standard
Dual InterFace
DES
DIF
ECC
ICE
Elliptic Curve Cryptography
Integrated Circuit Emulator
Rivest, Shamir and Adleman
Special Function Register
RSA
SFR
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
8 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
9. Revision history
Table 5.
Revision history
Document ID
Release date Data sheet status
Change notice Supersedes
SMX2_FAM_P60D080_D144_SDS v.1
20100901
Objective short data sheet
-
-
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
9 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
10. Legal information
10.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
10.2 Definitions
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
10.3 Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
10 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
10.4 Licenses
ICs with DPA Countermeasures functionality
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
NXP ICs containing functionality
implementing countermeasures to
Differential Power Analysis and Simple
Power Analysis are produced and sold
under applicable license from
non-automotive qualified products in automotive equipment or applications.
Cryptography Research, Inc.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
10.5 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
DESFire — is a trademark of NXP B.V.
FabKey — is a trademark of NXP B.V.
MIFARE — is a trademark of NXP B.V.
11. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
SMX2_FAM_P60D080_D144_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Objective short data sheet
PUBLIC
Rev. 1 — 1 September 2010
197210
11 of 12
P60D080 and P60D144
NXP Semiconductors
Secure high-performance dual interface smart card controller
12. Tables
Table 1. Quick reference data . . . . . . . . . . . . . . . . . . . . .5
Table 2. Feature table (EEPROM and RAM sizes without
applied implementation of MIFARE Plus and/or
Table 3. Ordering information . . . . . . . . . . . . . . . . . . . . . 6
Table 4. Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 5. Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9
DESFire EV1). . . . . . . . . . . . . . . . . . . . . . . . . . .6
13. Figures
Fig 1. Functional diagram P60D080/P60D144 . . . . . . . .7
14. Contents
1
2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description. . . . . . . . . . . . . . . . . . . . . . 2
3
3.1
3.2
Features and benefits . . . . . . . . . . . . . . . . . . . . 3
Product specific features . . . . . . . . . . . . . . . . . 3
Security features. . . . . . . . . . . . . . . . . . . . . . . . 4
4
5
6
7
8
9
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Quick reference data . . . . . . . . . . . . . . . . . . . . . 5
Ordering information. . . . . . . . . . . . . . . . . . . . . 6
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 7
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9
10
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10.1
10.2
10.3
10.4
10.5
11
12
13
14
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 1 September 2010
197210
相关型号:
P60NS04ZB
N-channel clamped - 10mohm - 60A - TO-220 Fully protected Mesh Overlay Power MOSFET
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明