PCA85233UG [NXP]
LIQUID CRYSTAL DISPLAY DRIVER;
| 型号： | PCA85233UG |
| 厂家： | 
NXP |
| 描述： | LIQUID CRYSTAL DISPLAY DRIVER 驱动 接口集成电路 |
| 文件： | 总12页 (文件大小：315K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UM10764
Vertical Alignment (VA) displays and NXP LCD drivers
Rev. 1 — 11 November 2013
User manual
Document information
Info
Content
Keywords
Vertical Alignment, Twisted Nematic, LCD, PCA85232U, PCA85233UG,
PCA8576FUG, PCF21219DUGR, PCA85262ATT, PCA85276ATT
Abstract
Compared to the traditional Twisted Nematic (TN) displays, VA
displays have deeper black back-ground color, much higher
contrast ratio, much wider viewing angle and better image quality
at extreme temperatures. However, the VA display technology has
stronger requirements for the display drivers than the TN displays,
mainly in terms of higher LCD supply voltage (VLCD) and/or higher
frame frequency (ffr). NXP has extended their LCD driver portfolio
to specifically drive Vertical Alignment (VA) displays.
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
Revision history
Rev
Date
Description
new user manual, first revision
v.1
20131111
Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
2 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
1. Introduction
NXP extended the LCD drivers to specifically drive the high-contrast, true black
background and wide viewing angle Vertical Alignment (VA) displays.
2. Vertical Alignment display technology
Vertical Alignment (VA) is a display technology in which the liquid crystals naturally align
vertically to the glass substrates (homeotropic alignment). When no voltage is applied, the
polarized light passes through the cell without a change in polarization and the light is
completely blocked by the second polarizer set at 90 to the first, creating a perfectly black
state. When voltage is applied, the LC molecules rotate to a horizontal position allowing
light to pass through and create a white display image.
Segment:
off state: dark
on state: bright
Glass
Polarizer
orientation
ITO Layer (transparent Electrode)
direction of surface treatment
a
b
Liquid Crystal
incident light
Fig 1. Vertical Alignment display technology
3. Vertical Alignment (VA) compared to Twisted Nematic (TN) displays
In the traditional Twisted Nematic (TN) displays, the alignment layers used in the top and
bottom glasses are oriented orthogonal to each other creating a 90 twist of the LCD
molecules. The polarized light passes through the LC medium, where is twisted due to the
wave guiding of the LC and passes through the top polarizer (also called analyzer)
creating a bright state (this configuration is also called the normally white mode as
opposed to the normally black mode in which the polarizer are placed in parallel position).
Upon application of an electric field, the LC molecules align parallel to the electric field
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
3 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
due to their dielectric anisotropy, and the wave guiding nature of the LC medium is lost.
Thus, the polarized light from the first polarizer remains unchanged and is blocked by the
analyzer, creating the black state.
Segment:
off state: bright
on state: dark
Glass
Polarizer
orientation
ITO Layer (transparent Electrode)
direction of surface treatment
Liquid Crystal
incident light
Fig 2. Twisted Nematic display technology
Compared to the traditional Twisted Nematic (TN) displays, VA displays have deeper
black back-ground color, much higher contrast ratio, much wider viewing angle and better
image quality at extreme temperatures. This new break through display technology is
particularly well suited for applications where the display is
1. exposed to sunlight, i.e. needs to be readable in sunlight,
2. is mounted on a black background, e.g. in instrument clusters in the car or
3. is located sideways from the viewer, e.g. in the center stack of a car, and thus needs
to be viewable under a wide angle.
VA displays are in growing demand for many applications, such as automotive, white
goods, home, and medical equipment.
However, the VA display technologies have stronger requirements for the display drivers
than the TN displays, mainly in terms of higher LCD supply voltage (VLCD) and/or higher
frame frequency (ffr). The requirements depend on the specific VA technology developed
by each LCD manufacturer as well as on the multiplex rates (backplane drive
configuration) used in application. See Figure 3:
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
4 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
Note that the VA displays in mass production are only available with multiplex rates up to 1:64. The
major LCD manufacturing companies are working to develop the VA technology for higher
multiplex rates.
Fig 3. VA display requirements
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
5 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
4. NXP LCD drivers meet the VA requirements
Regardless of the manufacturer, NXP expanded its LCD drivers’ portfolio in order to meet
the strictest VA requirements in the industry. See Figure 4:
Fig 4. NXP LCD drivers (re)designed for VA displays
From one side, all the new Chip-On-Glass (COG) and packaged LCD drivers have been
specifically designed to drive the VA displays. The maximum value of the VLCD voltage
has been increased to 9.0 V in the drivers with multiplex drive mode up to 1:8, to 12 V in
the drivers with multiplex drive mode up to 1:9 (PCA8538UG) and to 16 V in the drivers
with multiplex drive mode up to 1:18 (PCA8539DUG). Similarly, the frame frequency has
been designed programmable in a wider range typically from 60 Hz up to 300 Hz or even
up to 360 Hz as in the drivers with multiplex rate up to 1:18.
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
6 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
Fig 5. Displays of the demo boards driven by the PCA8538 and PCA8539
From the other side, the existing LCD drivers have been upgraded with new versions,
which are pin-to-pin compatible with their respective predecessors, but delivering higher
VLCD and/or higher frame frequency. In such a way, the customers can easily replace the
existing NXP LCD drivers with the new ones. This allows the usage of the better
performing VA displays with no or minimal hardware and software changes. Table 1 lists
the NXP products upgraded to meet the VA display requirements:
Table 1.
Existing NXP products upgraded to meet the VA display requirements
New NXP
product
Predecessor
product
Package
Maximum
resolution
VLCD(max) [V] ffr(typical) [Hz] Notes
PCA85232U
PCA85233UG
PCA8576FUG
PCA85132U
PCA85133U
PCA8576DU
COG
4 x 160
4 x 80
4 x 40
8.0
8.0
8.0
117 to 176
150 to 220
200
ffr programmable,
in production
COG
ffr programmable,
in production
COG
Up to 105 C,
release Nov. 2013
PCF21219DUGR PCF2119RU
COG
2 lines x 16
characters
6.5
8.0
8.0
200
200
200
Internal VLCD;
Release Jan. 2014
Up to 105 C,
PCA85262ATT
PCA85276ATT
PCA85162T
PCA85176T
TSSOP48
TSSOP56
4 x 32
release Dec. 2013
Up to 105 C,
4 x 40
release Dec. 2013
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
7 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
5. References
[1] AN10170 — Design guidelines for COG modules with NXP monochrome LCD
drivers
[2] PCA85232U — LCD driver for low multiplex rates. Data sheet
[3] PCA85233 — Universal LCD driver for low multiplex rates. Data sheet
[4] PCA8576F — Automotive LCD driver for low multiplex rates. Data sheet
[5] PCF21219 — LCD controllers/drivers. Data sheet
[6] PCA85262 — 32 x 4 automotive LCD driver for low multiplex rates. Data sheet
[7] PCA85276 — Automotive LCD driver for low multiplex rates. Data sheet
[8] R_10015 — Chip-On-Glass (COG) - a cost-effective and reliable technology for
LCD displays
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
8 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
6. Legal information
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
6.1
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
6.2
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Evaluation products — This product is provided on an “as is” and “with all
faults” basis for evaluation purposes only. NXP Semiconductors, its affiliates
and their suppliers expressly disclaim all warranties, whether express, implied
or statutory, including but not limited to the implied warranties of
non-infringement, merchantability and fitness for a particular purpose. The
entire risk as to the quality, or arising out of the use or performance, of this
product remains with customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
In no event shall NXP Semiconductors, its affiliates or their suppliers be liable
to customer for any special, indirect, consequential, punitive or incidental
damages (including without limitation damages for loss of business, business
interruption, loss of use, loss of data or information, and the like) arising out
the use of or inability to use the product, whether or not based on tort
(including negligence), strict liability, breach of contract, breach of warranty or
any other theory, even if advised of the possibility of such damages.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Notwithstanding any damages that customer might incur for any reason
whatsoever (including without limitation, all damages referenced above and
all direct or general damages), the entire liability of NXP Semiconductors, its
affiliates and their suppliers and customer’s exclusive remedy for all of the
foregoing shall be limited to actual damages incurred by customer based on
reasonable reliance up to the greater of the amount actually paid by customer
for the product or five dollars (US$5.00). The foregoing limitations, exclusions
and disclaimers shall apply to the maximum extent permitted by applicable
law, even if any remedy fails of its essential purpose.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
6.3
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
9 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
7. Tables
Table 1. Existing NXP products upgraded to meet the VA
display requirements . . . . . . . . . . . . . . . . . . . . .7
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
10 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
8. Figures
Fig 1. Vertical Alignment display technology . . . . . . . . . .3
Fig 2. Twisted Nematic display technology . . . . . . . . . . .4
Fig 3. VA display requirements . . . . . . . . . . . . . . . . . . . .5
Fig 4. NXP LCD drivers (re)designed for VA displays . . .6
Fig 5. Displays of the demo boards driven by the PCA8538
and PCA8539. . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
UM10764
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
User manual
Rev. 1 — 11 November 2013
11 of 12
UM10764
NXP Semiconductors
Vertical Alignment (VA) displays and NXP LCD drivers
9. Contents
1
2
3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Vertical Alignment display technology . . . . . . 3
Vertical Alignment (VA) compared to Twisted
Nematic (TN) displays . . . . . . . . . . . . . . . . . . . . 3
4
5
NXP LCD drivers meet the VA requirements . 6
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.1
6.2
6.3
7
8
9
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2013.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 11 November 2013
Document identifier: UM10764
相关型号：
©2020 ICPDF网 联系我们和版权申明