PMDPB65UP [NXP]
TRANSISTOR 3.5 mA, 20 V, 2 CHANNEL, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, 2 X 2 MM, 0.65 MM HEIGHT, LEADLESS, ULTRA THIN, PLASTIC, HUSON-6, FET General Purpose Small Signal;型号: | PMDPB65UP |
厂家: | NXP |
描述: | TRANSISTOR 3.5 mA, 20 V, 2 CHANNEL, P-CHANNEL, Si, SMALL SIGNAL, MOSFET, 2 X 2 MM, 0.65 MM HEIGHT, LEADLESS, ULTRA THIN, PLASTIC, HUSON-6, FET General Purpose Small Signal 开关 光电二极管 晶体管 |
文件: | 总15页 (文件大小:193K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PMDPB65UP
20 V, 3.5 A dual P-channel Trench MOSFET
Rev. 2 — 8 March 2011
Product data sheet
1. Product profile
1.1 General description
Dual small-signal P-channel enhancement mode Field-Effect Transistor (FET) in a small
and leadless ultra thin SOT1118 Surface-Mounted Device (SMD) plastic package using
Trench MOSFET technology.
1.2 Features and benefits
Trench MOSFET technology
Small and leadless ultra thin SMD
plastic package: 2 × 2 × 0.65 mm
1.8 V RDSon rated for low voltage gate
drive
Exposed drain pad for excellent
thermal conduction
1 kV ElectroStatic Discharge (ESD)
protection
1.3 Applications
Charging switch for portable devices
DC-to-DC converters
Power management in battery-driven
portables
Hard disk and computing power
Small brushless DC motor drive
management
1.4 Quick reference data
Table 1.
Symbol
Quick reference data
Parameter Conditions
Min Typ Max Unit
Per transistor
VDS
VGS
ID
drain-source
voltage
Tamb = 25 °C
-
-
-
-
-20
8
V
V
A
gate-source
voltage
-8
-
[1]
drain current
VGS = -4.5 V; Tamb = 25 °C
-3.5
Static characteristics (per transistor)
RDSon
drain-source
on-state
resistance
VGS = -4.5 V; ID = -1 A;
tp ≤ 300 µs; δ ≤ 0.01 ;
Tj = 25 °C
-
58
70
mΩ
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated, mounting pad for
drain 6 cm2.
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
2. Pinning information
Table 2.
Pinning information
Symbol Description
Pin
1
Simplified outline
Graphic symbol
S1
G1
D2
S2
G2
D1
D1
D2
source 1
gate 1
6
5
4
2
1
2
6, 7
5
3
drain 2
source 2
gate 2
7
8
4
5
1
2
3
6
drain 1
drain 1
drain 2
Transparent top view
7
SOT1118 (HUSON6)
3, 8
4
8
017aaa062
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
PMDPB65UP
HUSON6
plastic thermal enhanced ultra thin small outline package;
no leads; 6 terminals
SOT1118
4. Marking
Table 4.
Marking codes
Type number
PMDPB65UP
Marking code
1C
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
Per transistor
VDS
VGS
ID
drain-source voltage
gate-source voltage
drain current
Tamb = 25 °C
-
-20
8
V
-8
-
V
[1]
[1]
VGS = -4.5 V; Tamb = 25 °C
VGS = -4.5 V; Tamb = 100 °C
Tamb = 25 °C; single pulse; tp ≤ 10 µs
Tamb = 25 °C
-3.5
-2.7
-20
520
1.25
8.3
A
-
A
IDM
Ptot
peak drain current
-
A
[2]
[1]
total power dissipation
-
mW
W
W
-
Tsp = 25 °C
-
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
2 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
Table 5.
Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Per device
Tj
Parameter
Conditions
Min
Max
Unit
junction temperature
ambient temperature
storage temperature
-
150
150
150
°C
°C
°C
Tamb
-55
-65
Tstg
Source-drain diode
[1]
[3]
IS
source current
Tamb = 25 °C
-
-
-1.4
A
V
ESD maximum rating
VESD
electrostatic discharge voltage HBM; C = 100 pF; R = 1.5 kΩ
1000
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated, mounting pad for drain 6 cm2.
[2] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.
[3] Measured between all pins.
017aaa001
017aaa002
120
120
P
I
der
der
(%)
(%)
80
80
40
40
0
−75
0
−75
−25
25
75
125
175
(°C)
−25
25
75
125
T
175
(°C)
T
amb
amb
Fig 1. Normalized total power dissipation as a
function of ambient temperature
Fig 2. Normalized continuous drain current as a
function of ambient temperature
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
3 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
017aaa066
2
−10
I
D
Limit R
= V /I
DS D
DSon
(A)
−10
(1)
(2)
−1
−1
(3)
(4)
(5)
−10
(6)
−2
−10
−10
−1
2
−1
−10
−10
V
(V)
DS
IDM = single pulse
(1) tp = 100 μs
(2) tp = 1 ms
(3) tp = 10 ms
(4) DC; Tsp = 25 °C
(5) tp = 100 ms
(6) DC; Tamb = 25 °C; drain mounting pad 6 cm2
Fig 3. Safe operating area; junction to ambient; continuous and peak drain currents as a function of drain-source
voltage
6. Thermal characteristics
Table 6.
Symbol
Thermal characteristics
Parameter
Conditions
Min
Typ
Max
Unit
Per transistor
[1]
[2]
Rth(j-a)
thermal resistance
from junction to
ambient
in free air
-
-
-
-
240
100
K/W
K/W
Rth(j-sp)
thermal resistance
from junction to solder
point
-
-
15
K/W
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for drain 6 cm2.
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
4 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
017aaa067
3
10
Z
th(j-a)
duty cycle = 1
0.75
(K/W)
2
0.5
10
0.33
0.2
0.25
0.1
0
0.05
10
0.02
0.01
1
10
−3
−2
−1
2
3
10
10
1
10
10
10
t
(s)
p
FR4 PCB, standard footprint
Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
017aaa068
3
10
Z
th(j-a)
(K/W)
duty cycle = 1
0.75
2
10
0.5
0.25
0.1
0.33
0.2
0.05
10
0.02
0.01
0
1
10
−3
−2
−1
2
3
10
10
1
10
10
10
t
(s)
p
FR4 PCB, mounting pad for drain 6 cm2
Fig 5. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
5 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
7. Characteristics
Table 7.
Symbol
Characteristics
Parameter
Conditions
Min
Typ
Max
Unit
Static characteristics (per transistor)
V(BR)DSS
drain-source
breakdown voltage
ID = -250 µA; VGS = 0 V; Tj = 25 °C
-20
-
-
V
V
VGSth
gate-source threshold ID = -250 µA; VDS = VGS; Tj = 25 °C
voltage
-0.4
-0.7
-1
IDSS
drain leakage current
VDS = -20 V; VGS = 0 V; Tj = 25 °C
VDS = -20 V; VGS = 0 V; Tj = 150 °C
VGS = 8 V; VDS = 0 V; Tj = 25 °C
VGS = -8 V; VDS = 0 V; Tj = 25 °C
-
-
-
-
-
-
-1
µA
µA
µA
µA
mΩ
-
-10
10
-10
70
IGSS
gate leakage current
1
-1
58
RDSon
drain-source on-state
resistance
VGS = -4.5 V; ID = -1 A; tp ≤ 300 µs;
δ ≤ 0.01 ; Tj = 25 °C
VGS = -4.5 V; ID = -1 A; pulsed;
tp ≤ 300 µs; δ ≤ 0.01 ; Tj = 125 °C
-
-
-
-
80
72
100
8
100
90
150
-
mΩ
mΩ
mΩ
S
VGS = -2.5 V; ID = -1 A; tp ≤ 300 µs;
δ ≤ 0.01 ; Tj = 25 °C
VGS = -1.8 V; ID = -0.5 A; tp ≤ 300 µs;
δ ≤ 0.01 ; Tj = 25 °C
gfs
forward
VDS = -5 V; ID = -1 A; pulsed;
transconductance
tp ≤ 300 µs; δ ≤ 0.01 ; Tj = 25 °C
Dynamic characteristics (per transistor)
QG(tot)
QGS
QGD
Ciss
total gate charge
gate-source charge
gate-drain charge
input capacitance
output capacitance
ID = -3.3 A; VDS = -10 V; VGS = -4.5 V;
Tj = 25 °C
-
-
-
-
-
-
4.5
0.8
1
6
-
nC
nC
nC
pF
pF
pF
-
VGS = 0 V; VDS = -10 V; f = 1 MHz;
Tj = 25 °C
380
72
61
-
Coss
Crss
-
reverse transfer
capacitance
-
td(on)
tr
td(off)
tf
turn-on delay time
rise time
VDS = -15 V; RL = 15 Ω; VGS = -8 V;
-
-
-
-
5
-
-
-
-
ns
ns
ns
ns
RG(ext) = 6 Ω; Tj = 25 °C
10
57
35
turn-off delay time
fall time
Source-drain diode (per transistor)
VSD
source-drain voltage
IS = -1.3 A; VGS = 0 V; Tj = 25 °C
-
-0.75 -1
V
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
6 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
017aaa069
017aaa070
−3
−4
−5
−10.0
−10
V
= −3.0 V
GS
I
D
−2.0 V
(A)
−8.0
I
D
−2.4 V
−2.2 V
(A)
−1.8 V
−6.0
−4.0
−2.0
0.0
(1)
(2)
(3)
−10
−1.6 V
−1.4 V
−10
0.0
−1.0
−2.0
−3.0
−4.0
0.0
−0.4
−0.8
−1.2
V
(V)
V
(V)
GS
DS
Tamb = 25 °C
Tamb = 25 °C; VDS = −5 V
(1) minimum values
(2) typical values
(3) maximum values
Fig 6. Output characteristics: drain current as a
function of drain-source voltage; typical values
Fig 7. Sub-threshold drain current as a function of
gate-source voltage
017aaa071
017aaa072
0.20
0.20
(1)
(2)
R
R
DSon
Dson
(Ω)
(Ω)
(3)
0.15
0.15
0.10
0.05
0.0
(4)
0.10
0.05
0.0
(5)
(6)
(1)
(2)
−1.0
−2.0
−3.0
−4.0
−5.0
−6.0
0.0
−2.0
−4.0
−6.0
I
(A)
V
(V)
GS
D
T
amb = 25 °C
ID = −1 A
(1) VGS = −1.5 V
(2) VGS = −1.6 V
(3) VGS = −1.8 V
(4) VGS = −2 V
(1) Tamb = 150 °C
(2) Tamb = 25 °C
(5) VGS = −2.5 V
(6) VGS = −4.5 V
Fig 8. Drain-source on-state resistance as a function
of drain current; typical values
Fig 9. Drain-source on-state resistance as a function
of gate-source voltage; typical values
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
7 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
017aaa073
017aaa074
−6.0
2.0
1.5
1.0
0.5
0.0
(1)
(2)
a
I
D
(A)
−4.0
(2)
(1)
−2.0
0.0
0.0
−0.5
−1.0
−1.5
−2.0
−60
0
60
120
180
(°C)
V
(V)
T
GS
amb
VDS > ID × RDSon
(1) Tamb = 25 °C
(2) Tamb = 150 °C
Fig 10. Transfer characteristics: drain current as a
function of gate-source voltage; typical values
Fig 11. Normalized drain-source on-state resistance as
a function of ambient temperature; typical
values
017aaa075
017aaa076
3
−1.5
10
(1)
V
GS(th)
(V)
C
(pF)
(1)
(2)
(3)
−1.0
−0.5
0.0
(2)
2
10
(3)
10
−10
−1
2
−60
0
60
120
180
(°C)
−1
−10
−10
T
V
(V)
DS
amb
f = 1 MHz; VGS = 0 V
(1) Ciss
ID = −0.25 mA; VDS = VGS
(1) maximum values
(2) typical values
(2) Coss
(3) Crss
(3) minimum values
Fig 12. Gate-source threshold voltage as a function of
ambient temperature
Fig 13. Input, output and reverse transfer capacitances
as a function of drain-source voltage; typical
values
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
8 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
017aaa077
−5.0
V
DS
V
GS
(V)
I
−4.0
D
V
GS(pl)
−3.0
−2.0
−1.0
0.0
V
GS(th)
GS
V
Q
Q
GS1
GS2
Q
Q
GD
GS
Q
G(tot)
003aaa508
0.0
1.25
2.5
3.75
5.0
Q
(nC)
G
ID = −3.3 A; VDS = −10 V; Tamb = 25 °C
Fig 14. Gate-source voltage as a function of gate
charge; typical values
Fig 15. Gate charge waveform definitions
017aaa078
−6.0
I
S
(A)
−4.0
(1)
(2)
−2.0
0.0
0.0
−0.4
−0.8
−1.2
V
(V)
SD
VGS = 0 V
(1) Tamb = 150 °C
(2) Tamb = 25 °C
Fig 16. Source current as a function of source-drain voltage; typical values
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
9 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
8. Package outline
HUSON6: plastic, thermal enhanced ultra thin small outline package; no leads;
6 terminals; body 2 x 2 x 0.65 mm
SOT1118
b
p
v
A B
D
B
A
A
E
A
1
terminal 1
index area
detail X
C
terminal 1
index area
y
1
y
e
C
1
3
L
p
(8×)
E
1
X
6
4
1
e
1
D
0
1
2 mm
scale
Dimensions
Unit
(1)
A
A
b
p
D
D
1
E
E
1
e
e
1
L
p
v
y
y
1
1
max 0.65 0.04 0.35 2.1 0.77 2.1 1.1
mm nom
min
0.54 0.3
0.44 0.2
0.65
0.1 0.05 0.05
0.25 1.9 0.57 1.9 0.9
Note
1. Dimension including plating thickness.
sot1118_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
- - -
JEITA
10-08-03
10-08-16
SOT1118
Fig 17. Package outline SOT1118 (HUSON6)
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
10 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
9. Soldering
2.1
0.65
0.49
0.65
0.49
0.3 0.4
(6×) (6×)
solder lands
solder paste
solder resist
occupied area
0.875
1.05 1.15
(2×) (2×)
2.25
0.875
Dimensions in mm
0.35
0.72
(6×)
(2×)
0.45
0.82
(6×)
(2×)
sot1118_fr
Fig 18. Reflow soldering footprint for SOT1118 (HUSON6)
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
11 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
10. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
PMDPB65UP v.2
Modifications:
20110308
Product data sheet
-
PMDPB65UP v.1
•
2 “Pinning information”: corrected.
PMDPB65UP v.1
20110118 Product data sheet
-
-
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
12 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
11. Legal information
11.1 Data sheet status
Document status [1] [2]
Product status [3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URL http://www.nxp.com.
Suitability for use — NXP Semiconductors products are not designed,
11.2 Definitions
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
11.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
13 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein may
be subject to export control regulations. Export might require a prior
authorization from national authorities.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,
FabKey, GreenChip, HiPerSmart, HITAG, I²C-bus logo, ICODE, I-CODE,
ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight, MoReUse,
QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug, TOPFET,
TrenchMOS, TriMedia and UCODE — are trademarks of NXP B.V.
non-automotive qualified products in automotive equipment or applications.
HD Radio and HD Radio logo — are trademarks of iBiquity Digital
Corporation.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
PMDPB65UP
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 8 March 2011
14 of 15
PMDPB65UP
NXP Semiconductors
20 V, 3.5 A dual P-channel Trench MOSFET
13. Contents
1
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1
1.1
1.2
1.3
1.4
General description . . . . . . . . . . . . . . . . . . . . . .1
Features and benefits. . . . . . . . . . . . . . . . . . . . .1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Quick reference data . . . . . . . . . . . . . . . . . . . . .1
2
Pinning information. . . . . . . . . . . . . . . . . . . . . . .2
Ordering information. . . . . . . . . . . . . . . . . . . . . .2
Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .2
Thermal characteristics . . . . . . . . . . . . . . . . . . .4
Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . .6
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .10
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Revision history. . . . . . . . . . . . . . . . . . . . . . . . .12
3
4
5
6
7
8
9
10
11
Legal information. . . . . . . . . . . . . . . . . . . . . . . .13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .13
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .14
11.1
11.2
11.3
11.4
12
Contact information. . . . . . . . . . . . . . . . . . . . . .14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2011.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 8 March 2011
Document identifier: PMDPB65UP
相关型号:
©2020 ICPDF网 联系我们和版权申明