SA5532AD8-T [NXP]
暂无描述;型号: | SA5532AD8-T |
厂家: | NXP |
描述: | 暂无描述 运算放大器 光电二极管 |
文件: | 总12页 (文件大小:129K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INTEGRATED CIRCUITS
NE/SA/SE5532/5532A
Internally-compensated dual low noise
operational amplifier
Product specification
IC11 Data Handbook
1997 Sept 29
Philips
Semiconductors
Philips Semiconductors
Product specification
Internally-compensated dual low noise
operational amplifier
NE/SA/SE5532/5532A
DESCRIPTION
PIN CONFIGURATIONS
The 5532 is a dual high-performance low noise operational amplifier.
Compared to most of the standard operational amplifiers, such as
the 1458, it shows better noise performance, improved output drive
capability and considerably higher small-signal and power
bandwidths.
FE, N, D8 Packages
8
7
6
5
OUTPUT A
1
2
3
4
V+
OUTPUT B
INVERTING INPUT B
INVERTING INPUT A
A
B
This makes the device especially suitable for application in
high-quality and professional audio equipment, instrumentation and
control circuits, and telephone channel amplifiers. The op amp is
internally compensated for gains equal to one. If very low noise is of
prime importance, it is recommended that the 5532A version be
used because it has guaranteed noise voltage specifications.
NON-INVERTING INPUT A
V-
NON-INVERTING INPUT B
TOP VIEW
1
D Package
–IN
A
1
2
3
4
5
6
7
8
NC
16
FEATURES
15
14
13
12
11
10
9
NC
NC
+IN
A
• Small-signal bandwidth: 10MHz
NC
• Output drive capability: 600Ω, 10V
RMS
OUT
A
–V
CC
Ǹ
NC
• Input noise voltage: 5nVń Hz (typical)
+V
CC
NC
OUT
NC
B
• DC voltage gain: 50000
+IN
B
• AC voltage gain: 2200 at 10kHz
• Power bandwidth: 140kHz
• Slew rate: 9V/µs
NC
–IN
B
TOP VIEW
NOTE:
1. SOL and non-standard pinout.
SL00332
• Large supply voltage range: ±3 to ±20V
• Compensated for unity gain
Figure 1. Pin Configurations
ORDERING INFORMATION
DESCRIPTION
TEMPERATURE RANGE
ORDER CODE
NE5532N
DWG #
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Small Outline Package (SO)
0 to 70°C
–40°C to +85°C
–40°C to +85°C
0 to 70°C
SOT97-1
SOT97-1
SOT97-1
0580A
SA5532N
SA5532AN
NE5532FE
NE5532AN
NE5532AF
SE5532FE
SE5532AF
NE5532AD8
SA5532D8
SA5532AD8
SE5532AD8
NE5532D8
SA5532D8
SA5532AD8
SE5532D8
NE5532D
0 to 70°C
SOT97-1
0580A
0 to 70°C
-55°C to +125°C
-55°C to +125°C
0 to 70°C
0580A
0580A
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT162-1
SOT38-4
8-Pin Small Outline Package (SO)
–40°C to 85°C
–40°C to 85°C
-55°C to +125°C
0 to 70°C
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
–40°C to 85°C
–40°C to 85°C
-55°C to +125°C
0 to 70°C
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
16-Pin Plastic Small Outline Large (SOL) Package
16-Pin Plastic Dual In-Line Package (DIP)
-55°C to +125°C
SE5532N
2
1997 Sept 29
853-0949 16639
Philips Semiconductors
Product specification
Internally-compensated dual low noise
operational amplifier
NE/SA/SE5532/5532A
EQUIVALENT SCHEMATIC (EACH AMPLIFIER)
+
_
SL00333
Figure 2. Equivalent Schematic (Each Amplifier)
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
UNIT
V
V
V
Supply voltage
±22
V
V
V
S
Input voltage
±V
SUPPLY
IN
1
Differential input voltage
±0.5
DIFF
T
A
Operating temperature range
SA5532/A
–40 to +85
0 to 70
°C
°C
°C
NE5532/A
SE5532/A
-55 to +125
T
Storage temperature
Junction temperature
-65 to +150
150
°C
°C
STG
T
J
P
D
Maximum power dissipation,
2
T =25°C (still-air)
A
8
8
8
D8 package
N package
FE package
780
mW
mW
mW
mW
1200
1000
1200
16 D package
T
SOLD
Lead soldering temperature (10sec max)
300
°C
NOTES:
1. Diodes protect the inputs against over-voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential
input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.
2. Thermal resistances of the above packages are as follows:
N package at 100°C/W
F package at 135°C/W
D package at 105°C/W
D8 package at 160°C/W
3
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise
operational amplifier
NE/SA/SE5532/5532A
DC ELECTRICAL CHARACTERISTICS
1, 2, 3
T =25°C V =±15V, unless otherwise specified.
A
S
SE/5532/5532A
NE/SA/5532/5532A
SYMBOL
PARAMETER
Offset voltage
TEST CONDITIONS
UNIT
Min
Typ
Max
Min
Typ
Max
V
OS
0.5
2
3
0.5
4
5
mV
mV
Over temperature
∆V /∆T
5
5
µV/°C
OS
I
Offset current
Input current
100
200
10
150
200
nA
nA
OS
Over temperature
Over temperature
∆I /∆T
200
200
200
200
pA/°C
OS
I
B
400
700
800
nA
nA
1000
∆I /∆T
5
8
5
8
nA/°C
B
10.5
13
16
mA
I
Supply current
CC
Over temperature
mA
V
V
CM
Common-mode input range
Common-mode rejection ratio
Power supply rejection ratio
±12
±13
100
10
±12
±13
100
10
CMRR
PSRR
80
70
dB
50
100
µV/V
R ≥2kΩ, V =±10V
50
25
40
20
100
25
15
15
10
100
V/mV
V/mV
V/mV
V/mV
L
O
Over temperature
R ≥600Ω, V =±10V
A
VOL
Large-signal voltage gain
50
50
L
O
Over temperature
R ≥600Ω
Over temperature
±12
±10
±15
±12
±13
±12
±16
±14
±12
±10
±15
±12
±13
±12
±16
±14
L
R ≥600Ω, V =±18V
L
S
V
OUT
Output swing
V
Over temperature
R ≥2kΩ
Over temperature
±13 ±13.5
±12 ±12.5
±13 ±13.5
±10 ±12.5
L
R
Input resistance
30
10
300
38
30
10
300
38
kΩ
IN
I
Output short circuit current
60
60
mA
SC
NOTES:
1. Diodes protect the inputs against overvoltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential
input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.
2. For operation at elevated temperature, derate packages based on the package thermal resistance.
3. Output may be shorted to ground at V =±15V, T =25°C Temperature and/or supply voltages must be limited to ensure dissipation rating is
S
A
not exceeded.
AC ELECTRICAL CHARACTERISTICS
T =25°C V =±15V, unless otherwise specified.
A
S
NE/SA/SE5532/5532A
SYMBOL
PARAMETER
TEST CONDITIONS
A =30dB Closed-loop
UNIT
Min
Typ
Max
V
R
Output resistance
0.3
Ω
OUT
f=10kHz, R =600Ω
L
Voltage-follower
Overshoot
V
IN
=100mV
10
%
P-P
C =100pF, R =600Ω
L
L
A
Gain
f=10kHz
2.2
10
9
V/mV
MHz
V/µs
V
GBW
Gain bandwidth product
Slew rate
C =100pF, R =600Ω
L
L
SR
V
=±10V
140
100
kHz
kHz
OUT
Power bandwidth
V
=±14V, R =600Ω,
OUT L
V
CC
=±18V
4
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise
operational amplifier
NE/SA/SE5532/5532A
ELECTRICAL CHARACTERISTICS
T =25°C V =±15V, unless otherwise specified.
A
S
NE/SE5532
Typ
NE/SA/SE5532A
UNIT
SYMBOL
PARAMETER
Input noise voltage
TEST CONDITIONS
f =30Hz
Min
Max
Min
Typ
Max
V
NOISE
8
5
8
5
12
6
nV/√Hz
nV/√Hz
O
f =1kHz
O
I
Input noise current
Channel separation
f =30Hz
2.7
0.7
2.7
0.7
pA/√Hz
pA/√Hz
NOISE
O
f =1kHz
O
f=1kHz, R =5kΩ
110
110
dB
S
TYPICAL PERFORMANCE CHARACTERISTICS
Closed-Loop Frequency
Response
Large-Signal Frequency
Response
Open-Loop Frequency
Response
60
40
20
0
120
80
40
0
40
TYPICAL VALUES
TYPICAL VALUES
V
= +15V
S
TYPICAL VALUES
RF = 10kΩ; RE = 100Ω
30
20
10
0
RF = 9kΩ; RE = 1kΩ
RF = 1kΩ; RE = ∞
(V)
Vo(p-p)
-40
-20
2
3
4
5
6
7
2
3
4
5
6
7
10 10 10 10 10 10
10 10 10 10 10 10 10
3
4
5
6
7
8
10
10
10
10
10
f (Hz)
10
f (Hz)
f (Hz)
Input Commom-Mode
Voltage Range
Output Short-Circuit Current
Input Bias Current
80
1,4
30
V
= +15V
V
= +15V
S
S
TYPICAL VALUES
60
40
20
0
1,2
0,8
0,4
0
20
I
I
I
O
(mA)
V
(V)
TYP
(mA)
IN
10
0
-55 -25
0
25 50 75 100 +125
-55 -25
0
25 50 75 100 +125
0
10
20
o
o
T
( C)
T
( C)
A
A
Vp; -V (V)
N
Supply Current
Input Noise Voltage Density
6
4
2
0
–2
10
I
= 0
O
10
1
TYP
TYP
I
I
P
N
Ǹ
(nVń Hz)
(mA)
–1
–2
10
10
2
3
4
10
10
10
10
f (Hz)
0
10
20
SL00334
Vp; -V (V)
N
Figure 3. Typical Performance Characteristics
5
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise
operational amplifier
NE/SA/SE5532/5532A
TEST CIRCUITS
+
V+
5532 (1/2)
R
S
25Ω
5532
–
V
OUT
–
+
V
IN
R
F
1k
600Ω
100pF
V–
V
I
800Ω
R
100pF
E
Voltage-Follower
Closed-Loop Frequency Response
SL00335
Figure 4. Test Circuits
6
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise operational
amplifier
NE/SA/SE5532/5532A
DIP8: plastic dual in-line package; 8 leads (300 mil)
SOT97-1
7
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise operational
amplifier
NE/SA/SE5532/5532A
0580A
8-PIN (300 mils wide) CERAMIC DUAL IN-LINE (F) PACKAGE
853–0580A 006688
8
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise operational
amplifier
NE/SA/SE5532/5532A
SO8: plastic small outline package; 8 leads; body width 3.9mm
SOT96-1
9
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise operational
amplifier
NE/SA/SE5532/5532A
SO16: plastic small outline package; 16 leads; body width 7.5 mm
SOT162-1
10
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise operational
amplifier
NE/SA/SE5532/5532A
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
11
1997 Sept 29
Philips Semiconductors
Product specification
Internally-compensated dual low noise operational
amplifier
NE/SA/SE5532/5532A
DEFINITIONS
Data Sheet Identification
Product Status
Definition
This data sheet contains the design target or goal specifications for product development. Specifications
may change in any manner without notice.
Objective Specification
Formative or in Design
This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips
Semiconductors reserves the right to make changes at any time without notice in order to improve design
and supply the best possible product.
Preliminary Specification
Product Specification
Preproduction Product
Full Production
This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes
at any time without notice, in order to improve design and supply the best possible product.
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,
including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,
or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes
only. PhilipsSemiconductorsmakesnorepresentationorwarrantythatsuchapplicationswillbesuitableforthespecifiedusewithoutfurthertesting
or modification.
LIFE SUPPORT APPLICATIONS
Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,
orsystemswheremalfunctionofaPhilipsSemiconductorsandPhilipsElectronicsNorthAmericaCorporationProductcanreasonablybeexpected
to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips
Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully
indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Copyright Philips Electronics North America Corporation 1997
All rights reserved. Printed in U.S.A.
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Date of release: 04–96
9397 750 01699
Document order number:
Philips
Semiconductors
相关型号:
©2020 ICPDF网 联系我们和版权申明