TDA18212HNC1 [NXP]
Silicon Tuner for terrestrial and cable digital TV reception; 硅调谐器,用于地面和有线数字电视接收型号: | TDA18212HNC1 |
厂家: | NXP |
描述: | Silicon Tuner for terrestrial and cable digital TV reception |
文件: | 总10页 (文件大小:204K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TDA18212HN
Silicon Tuner for terrestrial and cable digital TV reception
Rev. 2 — 12 August 2010
Product data sheet
1. General description
The TDA18212HN is a Silicon Tuner designed for terrestrial and cable TV reception for
digital signals. TDA18212HN/M (Master) is to be used as a stand-alone tuner IC or Master
in dual tuner application. TDA18212HN/S (Slave) is only to be used as Slave Silicon
Tuner in dual tuner application.
The TDA18212HN supports all digital TV standards and delivers a LOW IF (LIF) signal to
a channel demodulator for digital TV.
The TDA18212HN facilitates design-ins by:
• Allowing easy on-board integration
• Drastically reducing the size of the tuner function
• Providing flexibility in system solution development
• Allowing straightforward dual tuner applications optimization
2. Features and benefits
Fully integrated IF selectivity; eliminating the need for external SAW filters
Worldwide digital terrestrial and cable including A74
Fully integrated oscillators
Alignment free
Single 3.3 V supply voltage
Low power consumption
Integrated wideband gain control
Crystal oscillator output buffer (16 MHz) for single crystal applications
I2C-bus interface compatible with 3.3 V microcontrollers
Slave tuner output function to drive second (slave) Silicon Tuner
Easy programming
5 ms tuning time
LIF channel center frequency output ranging from 3 MHz to 5 MHz
1.7 MHz, 6 MHz, 7 MHz, 8 MHz and 10 MHz channel bandwidths
Ready for DVB-T2
Loop-Through (LT)
RoHS compliant
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
3. Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min Typ Max Unit
fRF
RF frequency
tuner noise figure
phase jitter
full range of RF input
75 Ω source; maximum gain
42
-
-
870 MHz
NFtun
ϕjit
5.0 5.6 dB
UHF; integrated from 250 Hz
to 4 MHz
-
0.4 0.6 degree
αimage
image rejection
worst case for image
rejection and 4 MHz IF
frequency for levels above
−50 dBm
55
63
-
-
-
dB
ICP1dB 1 dB input compression at tuner input and minimum
124
dBμV
point
gain
4. Ordering information
Table 2.
Ordering information
Type number
Package
Name
Description
Version
TDA18212HN/M/C1[1] HVQFN40 plastic thermal enhanced very thin quad flat
SOT618-1
package; no leads; 40 terminals; body
TDA18212HN/S/C1[2]
6 × 6 × 0.85 mm
[1] M for master.
[2] S for slave.
TDA18212_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 12 August 2010
2 of 10
xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x
IR mixer
RF input
42-870 MHz
H3H5
filter
LNA
IF filters
AGCK
IF AGC
IFP
RFIN
SURGE
CB TRAP
IFN
RFAGC
AGC3
VIFAGC
RF FILTER
AGC2
AGC1
AGC5
AGC4
LT enable
LT
PLD
SURGE
IRQ
LO
DIVIDERS
AS_XTSEL
SDA
2
I C-BUS CONTROL
AND
INTERFACES
STO
SCL
nd
2
tuner
FRAC-N
DIVIDER
Xtal
FREEZE
AGC AND
DUAL TUNER
PROTOCOL
LC VCO
MASTERSYNC
TEMPERATURE
SENSOR
loop
filter
001aak494
Fig 1. Block diagram TDA18212HN/M
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
IR mixer
H3H5
filter
LNA
IF filters
AGCK
IF AGC
IFP
RFIN
IFN
RFAGC
AGC3
VIFAGC
RF FILTER
AGC2
AGC1
AGC5
AGC4
LO
DIVIDERS
PLD
IRQ
AS_XTSEL
SDA
2
FRAC-N
DIVIDER
I C-BUS CONTROL
AND
INTERFACES
SCL
LC VCO
FREEZE
AGC AND
DUAL TUNER
PROTOCOL
TEMPERATURE
SENSOR
MASTERSYNC
loop
filter
001aal012
Fig 2. Block diagram TDA18212HN/S
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
6. Limiting values
Table 3.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
−0.3
−0.3
Max
+3.6
+3.6
Unit
V
VCC
VI
supply voltage
input voltage
pins SDA and SCL
all other pins:
VCC < 3.3 V
V
−0.3
−0.3
−40
-
VCC + 0.3
+3.6
V
VCC > 3.3 V
V
Tstg
Tj
storage temperature
+150
°C
°C
°C
kV
V
junction temperature
125
[1]
Tamb
VESD
ambient temperature
−20
−2
electrostatic discharge voltage
EIA/JESD22-A114 (human body model)
EIA/JESD22-C101-C (FCDM) class III[2]
+2
-
750
[1] The maximum allowed ambient temperature Tamb(max) depends on the assembly conditions of the package and especially on the design
of the Printed-Circuit Board (PCB) and die connection. The application mounting must be done in such a way that the maximum junction
temperature is never exceeded. The junction temperature can be obtained by reading the temperature sensor bit via I2C-bus. The
junction temperature: Tj = Tamb + ΔTj-c. where ΔTj-c = power × Rth.
[2] Class III: 500 V to 1000 V
7. Abbreviations
Table 4.
Acronym
AGC
Abbreviations
Description
Automatic Gain Control
AGCK
CB
Automatic Gain Control number K
Citizens’ Band
DTMB
DVB
Digital Terrestrial Multimedia Broadcast
Digital Video Broadcasting
DVB-Terrestrial/Terrestrial second generation/Cable/Handheld
ElectroStatic Discharge
DVB-T/T2/C/H
ESD
EU
European Union
FCDM
FRAC-N
IC
Field-Induced Charged-Device Model
FRACtional-N
Integrated Circuit
IF
Intermediate Frequency
IR
Image Rejection
ISDB-T
LC-VCO
LNA
Integrated Services Digital Broadcasting - Terrestrial
Inductors and Capacitors - Voltage Controlled Oscillator
Low-Noise Amplifier
LO
Local Oscillator
LT
Loop-Through
RF
Radio Frequency
TDA18212_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 12 August 2010
5 of 10
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
Table 4.
Abbreviations …continued
Acronym
RoHS
SAW
STO
Description
Restriction on Hazardous Substances
Surface Acoustic Wave
Slave Tuner Output
UHF
Ultra High Frequency
United States
US
VCO
VHF
Voltage Controlled Oscillator
Very High Frequency
8. Revision history
Table 5.
Revision history
Release date
Document ID
Data sheet status
Change notice
Supersedes
TDA18212HN_SDS v.2[1] 20100812
Product data sheet
-
-
[1] Revision 1 is not available.
TDA18212_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 12 August 2010
6 of 10
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
9. Legal information
9.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
9.2
Definitions
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
9.3
Disclaimers
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
TDA18212_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 12 August 2010
7 of 10
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
9.4
Licenses
ICs with DVB-T or DVB-T2 functionality
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
Use of this product in any manner that complies with the DVB-T or the
DVB-T2 standard may require licenses under applicable patents of the
DVB-T respectively the DVB-T2 patent portfolio, which license is available
from Sisvel S.p.A., Via Sestriere 100, 10060 None (TO), Italy, and under
applicable patents of other parties.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
9.5
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I2C-bus — logo is a trademark of NXP B.V.
Silicon Tuner — is a trademark of NXP B.V.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
TDA18212_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 12 August 2010
8 of 10
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
11. Tables
Table 1. Quick reference data . . . . . . . . . . . . . . . . . . . . .2
Table 2. Ordering information . . . . . . . . . . . . . . . . . . . . .2
Table 3. Limiting values . . . . . . . . . . . . . . . . . . . . . . . . . .5
Table 4. Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table 5. Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 6
12. Figures
Fig 1. Block diagram TDA18212HN/M. . . . . . . . . . . . . . .3
Fig 2. Block diagram TDA18212HN/S . . . . . . . . . . . . . . .4
TDA18212_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 2 — 12 August 2010
9 of 10
TDA18212HN
NXP Semiconductors
Silicon Tuner for terrestrial and cable digital TV reception
13. Contents
1
2
3
4
5
6
7
8
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 6
9
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 7
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 7
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9.1
9.2
9.3
9.4
9.5
10
11
12
13
Contact information. . . . . . . . . . . . . . . . . . . . . . 8
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 12 August 2010
Document identifier: TDA18212_SDS
相关型号:
TDA18214AHN/C2/S1E
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214AHN/C2/S1K
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214AHN/C2/S1Y
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214HN/C1,551
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214HN/C1,557
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
©2020 ICPDF网 联系我们和版权申明