TDA18214AHN/C2/S1Y [NXP]
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin;型号: | TDA18214AHN/C2/S1Y |
厂家: | NXP |
描述: | TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin 电视 |
文件: | 总8页 (文件大小:217K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TDA18214
Silicon tuner for digital terrestrial and cable TV reception
Rev. 2 — 11 February 2013
Product short data sheet
1. General description
The TDA18214AHN and TDA18214HN are high performance silicon tuners designed for
digital terrestrial and digital cable TV reception.
The TDA18214AHN and TDA18214HN support all digital TV standards and deliver a Low
IF (LIF) signal to a demodulator.
The TDA18214AHN and TDA18214HN facilitate STB design by:
• Allowing on-board integration
• Drastically reducing the tuner Bill Of Material (BOM)
• Providing flexibility in system solution development
• Allowing straightforward, cost effective dual and multi-tuner applications optimization
In multi-tuner application, the TDA18214AHN is the master tuner whereas the
TDA18214HN is a slave tuner.
2. Features and benefits
Single 3.3 V supply voltage
Worldwide multistandard digital terrestrial and digital cable capabilities
Alignment free
RoHS compliant
I2C-bus interface compatible with 3.3 V microcontrollers
Crystal oscillator output buffer
Slave Tuner Output (STO) for multi-tuner applications (TDA18214AHN only)
Fully integrated oscillators
2 programmable General-Purpose Outputs (GPO)
Loop-Through Output (LTO)
1.7 MHz, 6 MHz, 7 MHz, 8 MHz and 10 MHz channel bandwidths
LIF channel center frequency output ranging from 0.8 MHz to 7.5 MHz
Fully integrated IF selectivity; eliminating the need for external SAW filters
Large flexibility in the IF filtering stage to ease the matching with various demodulators
circuits
Single-ended RF input, no need for external balun
Up to 1 GHz RF input capability
Excellent return loss compatible with cable requirements
Power Level Detector (PLD) embedded
Integrated gain control
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
Very fast tuning time
Strong immunity to LTE interferers in the digital dividend bandwidth
Strong immunity to WLAN interferers
3. Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min
Typ
Max Unit
fRF
RF frequency
full range of RF input
42
-
1002 MHz
NFtun
tuner noise figure
75 impedance source;
maximum gain
LNA Zi = 1 and
RF < 870 MHz
-
-
-
4.0
5.4
0.4
4.6
6
dB
LNA Zi = 1 and
870 MHz < RF < 1 GHz
dB
jit
phase jitter
integrated from 250 Hz to
4 MHz
0.6
-
degree
dB
image
image rejection
worst case, measured at
4 MHz IF frequency and for
image levels above
60 dBV
57.5 63
[1]
[1]
CSO
CTB
composite
worst interferer over RF
-
-
60
50
60
dBc
dBc
second-order distortion frequency with respect to
wanted carrier
composite triple beat
worst interferer over RF
frequency with respect to
wanted carrier for frequency
550 MHz
-65
[1]
worst interferer over RF
frequency with respect to
wanted carrier for frequency
> 550 MHz
-
-
-
55
dBc
ICP1dB
1 dB input
at the tuner input and
minimum gain
120
-
dBV
compression point
[1] Test scenario: 129 channels each 75 dBV.
4. Ordering information
Table 2.
Ordering information
Type number
Package
Name
Description
Version
SOT618-6
TDA18214AHN/C1 HVQFN40 plastic thermal enhanced very thin quad flat
package; no leads; 40 terminals; body
6 6 0.85 mm
TDA18214HN/C1
TDA18214_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 2 — 11 February 2013
2 of 8
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
5. Block diagram
to a second
TDA18214AHN
or to a
loop-through
output
CAPRFAGC
TDA18214HN
LTO
TDA18214AHN
LNA/RF
STO splitter
RF tracking
filter
H3H5 and
wireless filter
IFP
IFN
IF filters
IF amplifier
IR mixer
RFIN
SURGE AND CB
TRAP FILTER
RF AGC
VIFAGC
CAPSMOOTH
LO
DIVIDER
GAIN
MANAGEMENT
SCL
SDA
AS
XTALINSEL
XTALP
clock input
buffer
POWER LEVEL
DETECTOR
2
I C-bus
INTERFACE
TEMPERATURE
SENSOR
Xtal
oscillator
LC-VCO
IRQ
VCO
REGULATOR
∆∑ PLL
l/O
XTALN
XTOUT1
XTOUT2
clock output
buffer
GPO2
CP
VTUNE
CAPREGVCO
GPO1/RFAGC_SENSE
PLL loop
filter
aaa-002614
Fig 1. TDA18214AHN block diagram
TDA18214_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 2 — 11 February 2013
3 of 8
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
loop-through
output
CAPRFAGC
LTO
n.c.
TDA18214HN
LNA/RF
splitter
RF tracking
filter
H3H5 and
wireless filter
IFP
IFN
IF filters
IF amplifier
IR mixer
RFIN
SURGE AND CB
TRAP FILTER
RF AGC
VIFAGC
CAPSMOOTH
XTALINSEL
LO
GAIN
DIVIDER
MANAGEMENT
SCL
SDA
AS
clock input
buffer
POWER LEVEL
DETECTOR
2
I C-bus
INTERFACE
TEMPERATURE
SENSOR
XTALP
Xtal
oscillator
LC-VCO
IRQ
VCO
REGULATOR
∆∑ PLL
l/O
XTALN
XTOUT1
XTOUT2
clock output
buffer
GPO2
CP
VTUNE
CAPREGVCO
GPO1/RFAGC_SENSE
PLL loop
filter
aaa-002615
Fig 2. TDA18214HN block diagram
6. Limiting values
Table 3.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
Max
Unit
VCC
VI
supply voltage
input voltage
0.3
0.3
0.3
40
-
+3.6
V
VCC < 3.3 V
VCC > 3.3 V
VCC + 0.3
+3.6
V
V
Tstg
Tj
storage temperature
+150
C
C
C
kV
V
junction temperature
150
[1]
Tamb
ambient temperature
20
2
VESD
electrostatic discharge voltage
EIA/JESD22-A114 (HBM)
EIA/JESD22-C101-C (FCDM) class III[2]
+2
-
750
GPO pins: GPO1/RFAGC_SENSE and GPO2
VCC
ICC
supply voltage
supply current
0 V < Vpu < 5.5 V; Rpu > 390
0.3
20
+5.5
0
V
corresponding GPO ON
mA
TDA18214_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 2 — 11 February 2013
4 of 8
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
[1] The maximum allowed ambient temperature Tamb(max) depends on the assembly conditions of the package and especially on the design
of the Printed-Circuit Board (PCB) and die connection. The application mounting must be done in such a way that the maximum junction
temperature is never exceeded. The junction temperature can be obtained by reading the temperature sensor bit via I2C-bus. The
junction temperature: Tj = Tamb + Tj-c. where Tj-c = power Rth.
[2] Class III: 500 V to 1000 V.
7. Abbreviations
Table 4.
Acronym
AGC
BOM
FCDM
GPO
H3H5
HBM
IF
Abbreviations
Description
Automatic Gain Control
Bill Of Material
Field-induced Charged-Device Model
General Purpose Outputs
Harmonic 3 and Harmonic 5
Human Body Model
Intermediate Frequency
Input/Output
I/O
LC-VCO
LIF
Inductors and Capacitors - Voltage Controlled Oscillator
Low IF
LNA
Low-Noise Amplifier
LO
Local Oscillator
LTE
Long-Term Evolution
Loop-Through Output
Power Level Detector
Phase-Locked Loop
LTO
PLD
PLL
RF
Radio Frequency
RoHS
SAW
STB
Restriction of Hazardous Substances
Surface Acoustic Wave
Set-Top Box
STO
VCO
Xtal
Slave Tuner Output
Voltage Controlled Oscillator
Crystal
WLAN
Wireless Local Area Network
8. Revision history
Table 5.
Revision history
Document ID
Release date
20130211
Data sheet status
Change notice
Supersedes
TDA18214_SDS v.2
TDA18214_SDS v.1
Product short data sheet
Preliminary short data sheet
-
-
TDA18214_SDS v.1
-
20120713
TDA18214_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 2 — 11 February 2013
5 of 8
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
9. Legal information
9.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
9.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
9.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
TDA18214_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 2 — 11 February 2013
6 of 8
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
9.4
Licenses
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
ICs with DVB-T or DVB-T2 functionality
Use of this product in any manner that complies with the DVB-T or the
DVB-T2 standard may require licenses under applicable patents of the
DVB-T respectively the DVB-T2 patent portfolio, which license is available
from Sisvel S.p.A., Via Sestriere 100, 10060 None (TO), Italy, and under
applicable patents of other parties.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
9.5
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I2C-bus — logo is a trademark of NXP B.V.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
TDA18214_SDS
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2013. All rights reserved.
Product short data sheet
Rev. 2 — 11 February 2013
7 of 8
TDA18214
NXP Semiconductors
Silicon tuner for digital terrestrial and cable TV reception
11. Contents
1
2
3
4
5
6
7
8
General description. . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . . 2
Ordering information. . . . . . . . . . . . . . . . . . . . . 2
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5
9
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9.1
9.2
9.3
9.4
9.5
10
11
Contact information. . . . . . . . . . . . . . . . . . . . . . 7
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2013.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 11 February 2013
Document identifier: TDA18214_SDS
相关型号:
TDA18214HN/C1,551
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214HN/C1,557
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214HN/C1/S1,5
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18214HN/C1/S2Y
TDA18214 - Silicon tuner for digital terrestrial and cable TV reception QFN 40-Pin
NXP
TDA18219HN/C1
SPECIALTY CONSUMER CIRCUIT, PQCC40, 6 X 6 MM, 0.85 MM HEIGHT, ROHS COMPLIANT, PLASTIC, SOT618-1, HVQFN-40
NXP
TDA18219HN/C1,518
TDA18219HN - Silicon tuner for terrestrial and cable digital TV reception QFN 40-Pin
NXP
©2020 ICPDF网 联系我们和版权申明