首页 |元器件品牌

B19LP-JC [OHMITE]

General Specifications; 一般特定网络阳离子
B19LP-JC
型号： B19LP-JC
厂家： OHMITE MFG. CO.    OHMITE MFG. CO.
描述：

General Specifications
一般特定网络阳离子
文件： 总8页 (文件大小：258K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Series B  
Process Sealed Subminiature Antistatic Toggles  
A General Specifications  
Electrical Capacity (Resistive Load)  
Logic Level: 0.4VA maximum @ 28V AC/DC maximum  
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)  
Note: Find additional explanation of operating range in Supplement section.  
Other Ratings  
Contact Resistance: 50 milliohms maximum  
Insulation Resistance: 500 megohms minimum @ 500V DC  
Dielectric Strength: 500V AC minimum for 1 minute minimum  
Mechanical Life: 100,000 operations minimum for On-None-On & On-Off-On  
50,000 operations minimum for other circuits  
50,000 operations minimum for locking lever models  
Electrical Life: 50,000 operations minimum  
Nominal Operating Force: Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained)  
Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained)  
Toggle L: 0.59N  
Contact Timing: Nonshorting (break-before-make)  
Angle of Throw: 26°  
Materials & Finishes  
Toggle: Nickel plated brass  
Bushing: Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing  
Gasket: Nitrile butadiene rubber  
Case Housing: Glass fiber reinforced polyamide  
Support Bracket: Tin plated phosphor bronze  
Movable Contact: Phosphor bronze with gold plating  
Stationary Contacts: Copper alloy with gold plating  
Terminals: Copper alloy with gold plating  
Environmental Data  
Operating Temperature Range: –30°C through +85°C (–22°F through +185°F)  
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)  
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning  
in 1 minute; 3 right angled directions for 2 hours  
Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)  
Installation  
Mounting Torque: .30 ~ .45Nm (2.65 ~ 3.98 lb•in) for A1 actuator with threaded bushing only  
PCB Processing  
Soldering: Wave Soldering Recommended: See Profile A in Supplement section.  
Manual Soldering: See Profile A in Supplement section.  
Cleaning: Automated cleaning. See Cleaning specifications in Supplement section.  
Standards & Certifications  
Flammability Standards: UL94V-0 available  
The B Series toggles have not been tested for UL recognition or CSA certification.  
These switches are designed for use in a low-voltage, low-current, logic-level circuit.  
When used as intended in a logic-level circuit, the results do not produce hazardous energy.  
A12  
www.nkk.com  
Process Sealed Subminiature Antistatic Toggles  
Series B  
A
Distinctive Characteristics  
Subminiature size saves space on PC boards.  
Specifically developed for logic-level applications.  
Antistatic superstructure, consisting of the carbon impregnated  
bushing and the support bracket, prevents static discharge  
to the contacts. Static electricity from an operator’s touch  
travels from actuator through the bushing and bracket to  
the PC board.  
Locking lever mechanism offered as a toggle option.  
Optional threaded, 6mm diameter bushing for  
panel seal mounting meets IP65 of IEC60529  
specifications (similar to NEMA 4 and 13).  
Totally sealed body construction prevents  
contact contamination and allows time-  
and money-saving soldering and cleaning.  
Epoxy sealed terminals lock out flux and  
other contaminants.  
Award-winning STC contact mechanism with  
benefits unavailable in conventional mechanisms:  
smoother, positive detent actuation, increased contact  
stability and unparalleled logic-level reliability. (Additional  
STC details in Terms & Acronyms; see Supplement section.)  
.100” x .100” (2.54mm x 2.54mm) terminal spacing  
conforms to standard PC board grid spacing.  
Actual Size  
www.nkk.com  
A13  
Series B  
Process Sealed Subminiature Antistatic Toggles  
TYPICAL SWITCH ORDERING EXAMPLE  
A
B 1 2 A B  
Poles  
Toggles  
Optional Caps  
1
2
SPDT  
DPDT  
A
.394” (10.0mm) Bat  
G
J
.394” (10.0mm) Bat Lever Cap  
.248” (6.3mm) Bat Lever Cap  
.315” (8.0mm) Bat with  
A1 Panel Seal Threaded Bushing  
(Straight PC only)  
J
E
.248” (6.3mm) Bat  
.394” (10.0mm) Flatted  
.248” (6.3mm) Flatted  
H
Locking Lever  
(with Circuits 2 & 3 only)  
L
Circuits  
PC Terminals  
Cap  
Paddle  
Colors  
Colors  
2
3
5
ON NONE  
ON  
ON  
ON NONE (ON)  
P
* B  
* H  
* V  
Straight  
A
Black  
A
B
C
E
ON  
OFF  
Straight with Bracket  
Right Angle with Bracket  
Vertical with Bracket  
B
White  
Red  
C
*R (ON) NONE  
ON  
(ON)  
(ON)  
ON  
---  
---  
---  
---  
Yellow  
Green  
Blue  
8
9
(ON)  
ON  
OFF  
OFF  
OFF  
* Bracketed models are ESD protected  
F
G
H
*S (ON)  
Gray  
( ) = Momentary  
Reverse circuits R & S  
*
available with right angle  
& vertical only  
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE  
B12AB  
.394” (10.0mm)  
Bat Toggle  
SPDT  
Straight PC Terminals  
with Bracket  
ON-NONE-ON Circuit  
A14  
www.nkk.com  
Process Sealed Subminiature Antistatic Toggles  
Series B  
POLES & CIRCUITS  
A
Toggle Position  
( ) = Momentary  
Connected Terminals  
Throw & Schematics  
Up  
Center  
Down  
Up  
Center  
Down  
Note:  
SPDT  
Terminal numbers are  
not actually on the switch.  
Pole  
Model  
Slot  
Slot  
B12  
B13  
B15  
B1R  
B18  
B19  
B1S  
ON  
ON  
ON  
(ON)  
(ON)  
ON  
NONE  
OFF  
NONE  
NONE  
OFF  
ON  
ON  
(ON)  
ON  
(ON)  
(ON)  
ON  
2 (COM)  
SP  
2-3  
OPEN  
2-1  
3
1
OFF  
OFF  
(ON)  
B22  
B23  
B25  
B2R  
B28  
B29  
B2S  
ON  
ON  
ON  
(ON)  
(ON)  
ON  
NONE  
OFF  
NONE  
NONE  
OFF  
ON  
ON  
(ON)  
ON  
(ON)  
(ON)  
ON  
2
(COM)  
1
5
DP  
2-3 5-6  
OPEN  
2-1 5-4  
DPDT  
3
6
4
OFF  
OFF  
(ON)  
TOGGLES  
Standard Material & Finish: Brass with Bright Nickel  
.394” (10.0mm)  
Bat  
.315” (8.0mm) Bat with  
A1  
.248” (6.3mm)  
Bat  
A
J
Panel Seal Threaded Bushing  
26°  
26°  
(2.6) Dia  
.102  
26°  
(2.6) Dia  
.102  
(2.6) Dia  
.102  
(10.0)  
.394  
(8.0)  
.315  
(6.3)  
.248  
.394” (10.0mm)  
Flatted  
E
H
L
.248” (6.3mm) Flatted  
Locking Lever  
26°  
(4.5) Dia  
.177  
(5.1) Dia  
.201  
26°  
(1.6)  
.063  
(2.7)  
.106  
26°  
(2.6)  
.102  
(1.6)  
.063  
(12.5)  
.492  
(11.5)  
.453  
(10.0)  
.394  
(6.3)  
.248  
(5.8)  
.228  
(5.9)  
.232  
www.nkk.com  
A15  
Series B  
Process Sealed Subminiature Antistatic Toggles  
PC TERMINALS  
A
Use of a support bracket is recommended to increase PCB mounting strength and stability.  
P
B
Straight  
Straight with Bracket  
(10.16)  
.400  
(5.08)  
.200  
(5.08)  
.200  
(0.6) Typ  
.024  
(2.54) Typ  
.100  
(2.54) Typ  
.100  
(0.6) Dia Typ  
.024  
(0.6) Dia Typ  
.024  
(5.08)  
.200  
(0.4) Typ  
.016  
(3.1) Typ  
.122  
(3.1)  
.122  
V
H
Vertical with Bracket  
Right Angle with Bracket  
(2.54) Typ  
.100  
(0.5) Typ  
(0.6) Dia Typ  
.020  
.024  
(0.6) Dia Typ  
.024  
(2.54) Typ  
.100  
(2.54) Typ  
(0.6)  
.100  
(0.6)  
.024  
.024  
(0.4)  
.016  
(0.5) Typ  
.020  
(0.4)  
.016  
OPTIONAL CAPS  
AT4003  
.394” (10.0mm) Bat Lever Cap  
AT4064  
.248” (6.3mm) Bat Lever Cap  
G
J
26°  
(3.0) Dia  
.118  
26°  
(3.0) Dia  
.118  
Material: PVC  
Colors Available:  
Material: PVC  
Colors Available:  
A, B, C  
(11.0)  
.433  
(10.0)  
.394  
(7.0)  
.276  
(6.3)  
.248  
A, B, C  
Color Codes:  
A
B
C
E
F
G
H
Black  
White  
Red  
Yellow  
Green  
Blue  
Gray  
A16  
www.nkk.com  
Process Sealed Subminiature Antistatic Toggles  
Series B  
TYPICAL SWITCH DIMENSIONS  
A
Single Pole  
Straight PC  
(0.6) Dia Typ  
.024  
(6.0) Dia  
.236  
(2.6) Dia  
.102  
(1.0)  
.039  
1
1
2
3
(8.8)  
.346  
26°  
2
3
(2.54) Typ  
.100  
(0.8) Dia Typ  
.031  
Slot  
(3.5)  
.138  
(10.0)  
.394  
(0.8)  
.031  
(13.1)  
.516  
(1.0)  
.039  
(2.54) Typ  
.100  
(3.1)  
.122  
C
L
(6.8)  
.268  
C
L
B12AP  
Double Pole  
Straight PC  
(2.6) Dia  
.102  
(0.6) Dia Typ  
.024  
(6.0) Dia  
.236  
(5.08)  
.200  
4
5
6
1
1
4
5
6
2
3
(8.8)  
.346  
26°  
2
3
(2.54) Typ  
.100  
(0.8) Dia Typ  
.031  
Slot  
(3.5)  
.138  
(2.54) Typ  
.100  
(0.8)  
.031  
(10.0)  
.394  
(13.1)  
.516  
(3.1)  
.122  
(8.8)  
.346  
(5.08)  
.200  
B22AP  
ꢀ
ꢀ
SingleꢀPoleꢀ  
StraightꢀPCꢀ•ꢀBracket  
(6.0) Dia  
.236  
(2.6) Dia  
.102  
(0.4) Typ  
.016  
(0.6) Dia Typ  
.024  
(0.6) Typ  
.024  
(1.0)  
.039  
1
1
(10.16)  
.400  
(2.54) Typ  
.100  
(8.8)  
.346  
2
3
26°  
2
3
(0.8) Dia Typ  
.031  
(2.54)  
.100  
Slot  
(2.7)  
.106  
(10.0)  
.394  
(0.8)  
.031  
(13.1)  
.516  
(2.54) Typ  
.100  
(3.1)  
.122  
(6.0)  
.236  
(8.0)  
.315  
(1.0)  
.039  
C
L
(2.54)  
.100  
C
L
B12AB  
ꢀ
ꢀ
DoubleꢀPoleꢀ  
ꢀ
StraightꢀPCꢀ•ꢀBracketꢀ  
(2.6) Dia  
.102  
(0.4) Typ  
.016  
(0.6) Dia Typ  
.024  
(6.0) Dia  
.236  
(5.08)  
.200  
1
4
5
6
(10.16)  
.400  
4
5
6
1
(8.8)  
.346  
2
3
26°  
(2.54) Typ  
.100  
2
3
Slot  
(6.0)  
.236  
(8.8)  
.346  
(2.7)  
.106  
(10.0)  
.394  
(0.8)  
.031  
(13.1)  
.516  
(2.54) Typ  
(0.6) Typ  
.024  
(5.08)  
.200  
(0.8) Dia Typ  
.031  
.100  
(3.1)  
.122  
B22AB  
Single Pole  
Right Angle PC  
(2.6) Dia  
.102  
(3.4)  
.134  
(2.54) Typ  
.100  
3
(7.3)  
.287  
(6.0) Dia  
.236  
1
2
3
2
1
(5.08)  
.200  
Slot  
(0.6) Dia Typ  
.024  
(2.54) Typ  
.100  
(0.4)  
.016  
(3.1)  
(0.8) Dia Typ  
.031  
.122  
(5.08)  
.200  
(0.6) Typ  
.024  
(5.08)  
.200  
(2.7)  
.106  
(10.0)  
.394  
(8.8)  
.346  
(13.9)  
.546  
B12AH  
www.nkk.com  
A17  
Series B  
Process Sealed Subminiature Antistatic Toggles  
TYPICAL SWITCH DIMENSIONS  
A
Right Angle PC  
Double Pole  
(2.6) Dia  
.102  
(2.54) Typ  
.100  
(2.54)  
.100  
3
6
2
5
1
(8.8)  
.346  
(6.0) Dia  
.236  
(3.1) (4.4)  
.122 .173  
1
2
5
3
6
4
4
(5.08)  
.200  
Slot  
(0.4)  
.016  
(0.5)  
.020  
(2.54)  
.100  
(5.08)  
.200  
(0.6) Typ  
.024  
(5.08)  
.200  
(2.7)  
.106  
(10.0)  
.394  
(0.6) Dia Typ  
.024  
(2.54) Typ  
.100  
(0.8) Dia Typ  
.031  
(8.8)  
.346  
(16.4)  
.646  
B22AH  
Vertical PC  
Single Pole  
(2.6) Dia  
.102  
(6.0) Dia  
.236  
(1.0)  
.039  
(2.54) Typ  
.100  
1
1
2
3
(8.8)  
.346  
26°  
2
3
(1.0)  
.039  
(4.4)  
.173  
(5.08)  
.200  
(0.8) Dia Typ  
.031  
(2.54)  
.100  
(2.7)  
.106  
Slot  
(0.4)  
.016  
(5.08)  
.200  
(18.9)  
.746  
(0.5)  
.020  
(3.1)  
.122  
(0.6) Typ  
.024  
(2.54)  
.100  
(0.6) Dia Typ  
.024  
(2.54) Typ  
.100  
(1.0)  
C
L
.039  
(10.0)  
.394  
(8.0)  
.315  
C
L
B12AV  
Vertical PC  
Double Pole  
(6.0) Dia  
.236  
(2.6) Dia  
.102  
(5.08)  
.200  
(2.54) Typ  
.100  
4
5
6
1
1
4
5
6
(8.8)  
.346  
2
3
2
3
26°  
(4.4)  
.173  
(1.0)  
.039  
(5.08)  
.200  
(2.7)  
.106  
Slot  
(0.4)  
.016  
(5.08)  
.200  
(18.9)  
.746  
(0.5) (3.1)  
.020 .122  
(2.54) Typ  
.100  
(0.6) Typ  
.024  
(5.08)  
.200  
(0.8) Dia Typ  
.031  
(0.6) Dia Typ  
.024  
(8.8)  
.346  
(10.0)  
.394  
(5.08)  
.200  
B22AV  
LockingꢀLeverꢀ•ꢀStraightꢀPCꢀ•ꢀBracketꢀ  
SingleꢀPole  
(6.0)  
.236  
(5.1) Dia  
.201  
(4.5) Dia  
.177  
(0.4) Typ  
.016  
(0.6) Dia Typ  
.024  
(0.6) Typ  
.024  
(1.0)  
.039  
1
1
(2.54) Typ  
.100  
(10.16)  
.400  
2
3
(8.8)  
.346  
2
3
26°  
(5.8)  
.228  
(11.5)  
.453  
(12.5)  
.492  
(0.8) Dia Typ  
.031  
(2.54)  
.100  
Slot  
(5.5)  
.217  
(0.8)  
.031  
(15.5)  
.610  
(2.54) Typ  
(1.0)  
.100  
.039  
C
L
(8.0)  
.315  
(3.1)  
.122  
(2.54)  
.100  
C
L
B12LB  
LockingꢀLeverꢀ•ꢀStraightꢀPCꢀ•ꢀBracketꢀ  
DoubleꢀPole  
(4.5) Dia (5.1) Dia  
.177  
.201  
(0.4) Typ  
.016  
(0.6) Dia Typ  
.024  
(6.0) Dia  
.236  
(5.08)  
.200  
4
5
6
1
1
4
5
6
(2.54) Typ  
.100  
(10.16)  
.400  
2
(8.8)  
.346  
2
3
26°  
3
(5.8)  
.228  
(11.5)  
.453  
(12.5)  
.492  
Slot  
(0.8) Dia Typ  
.031  
(0.8)  
.031  
(15.5)  
.610  
(5.5)  
.217  
(2.54) Typ  
.100  
(3.1)  
.122  
(5.68)  
.224  
(8.85)  
.348  
(0.6) Typ  
.024  
(5.08)  
.200  
B22LB  
A18  
www.nkk.com  
Process Sealed Subminiature Antistatic Toggles  
Series B  
TYPICAL SWITCH DIMENSIONS  
A
ꢀ
ꢀ
PanelꢀSealꢀ•ꢀSingleꢀPoleꢀ  
ThreadedꢀBushingꢀ•ꢀStraightꢀPCꢀ  
(0.6) Dia Typ  
.024  
(2.6) Dia  
.102  
M6 P0.75  
(1.0)  
.039  
1
1
2
3
2
(8.8)  
.346  
26°  
(2.54) Typ  
3
.100  
(0.8) Dia Typ  
.031  
Slot  
(5.5)  
.217  
(0.8)  
.031  
(15.1)  
.594  
(2.54) Typ  
.100  
(3.1)  
.122  
(4.8)  
.189  
(6.8)  
.268  
(1.0)  
.039  
C
L
(8.0)  
.315  
C
L
B12A1P  
ꢀ
ꢀ
PanelꢀSealꢀ•ꢀDoubleꢀPoleꢀ  
Tꢀ hreadedꢀBushingꢀ•ꢀStraightꢀPCꢀ  
(0.6) Dia Typ  
.024  
(2.6) Dia  
.102  
M6 P0.75  
(5.08)  
.200  
4
5
6
1
1
4
5
6
2
3
(8.8)  
.346  
26°  
2
3
(2.54) Typ  
.100  
(0.8) Dia Typ  
.031  
Slot  
(5.5)  
.217  
(0.8)  
.031  
(15.1)  
.594  
(2.54) Typ  
.100  
(3.1)  
.122  
(4.8)  
.189  
(8.8)  
.346  
(2.54) Typ  
.100  
(8.0)  
.315  
C
L
B22A1P  
STANDARD HARDWARE & PANEL CUTOUT  
AT513M  
Metric Hex Nut  
AT063  
Gasket  
M6 P0.75  
(6.2) (8.6)  
.244 .339  
(6.0)  
.236  
(8.0)  
.315  
Material:  
Brass,  
Nickel plated  
Material:  
Nitrile butadiene  
rubber  
(5.0)  
.197  
(4.9)  
.193  
(6.9)  
.272  
(9.0)  
.354  
(1.5)  
.059  
Maximum Panel Thickness  
with Standard Hardware:  
.087” (2.2mm)  
(1.3)  
.051  
www.nkk.com  
A19  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明