MSM9892L [OKI]
2M-bit Serial Voice Flash Memory; 2M位串行语音闪存型号: | MSM9892L |
厂家: | OKI ELECTRONIC COMPONETS |
描述: | 2M-bit Serial Voice Flash Memory |
文件: | 总7页 (文件大小:105K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
E2D0090-29-22
This version: Feb. 1999
Previous version: May 1997
¡ Semiconductor
MSM9892L
2M-bit Serial Voice Flash Memory
GENERAL DESCRIPTION
TheMSM9892Lisa2Mbflashmemorythatoperatesat2.7Vto3.6V. Sincebackupisnotneeded,
the number of pins is small, and the pins are contained in a small-package 28-pin TSOP, the
MSM9892L is a flash memory suitable for applications such as handy terminals. In combination
withOKI'srecording/playbackIC(MSM9888L),asolid-staterecording/playbacksystemcanbe
easily constructed.
FEATURES
• Configuration
• Small page size
(one time write unit)
: 1024 pages ¥ 2112 bits
: 2048 per page
• Power supply voltage : Single 2.7 to 3.6 V
• Operating current : Supply current : Up to 35 mA
: Stanby current : Up to 10 mA
• Operating temperature : –10 to +70°C
• Package:
28-pin plastic TSOP (TSOPI28-P-813-0.55-K) (Product name: MSM9892LTS-KT)
PIN CONFIGURATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
28
27
26
25
24
23
22
21
20
19
18
17
16
15
TEST
RESET
PRT
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
VDD
GND
NC
NC
NC
CS
SCK
DI
DO
NC: No connection
28-Pin Plastic TSOP
1/6
¡ Semiconductor
MSM9892L
PIN DESCRIPTIONS
Pin
13
Symbol
DI
I/O
Description
Command, address, or data input pin.
I
O
I
14
DO
Data output pin.
12
SCK
Inputs the data transfer clock for the DI and DO pins.
The device accepts the SCK pulse when CS is at "L" level and does not accept the
SCK pulse when CS is at "H" level.
11
CS
I
1
3
2
6
7
TEST
PRT
O
I
Output pin for test. Leave this pin open.
Prohibits flash memory programming when PRT is at "L" level.
The device is reset when RESET is at "L" level.
Power supply pin (2.7 to 3.6 V)
RESET
VDD
I
I
GND
I
GND pin (0 V)
ABSOLUTE MAXIMUM RATINGS
Parameter
Power Supply Voltage
Input Voltage
Symbol
VDD
Condition
Ta=25°C
—
Rating
–0.3 to +7.0
–0.6 to VDD+0.6
–55 to +150
Unit
V
VIN
V
Storage Temperature
TSTG
°C
RECOMMENDED OPERATING CONDITIONS
Parameter
Power Supply Voltage
Operating Temperature
Symbol
VDD
Condition
GND=0V
—
Range
2.7 to 3.6
–10 to +70
Unit
V
Top
°C
ELECTRICAL CHARACTERISTICS
DC Characteristics
Parameter
Operating Current
Standby Current
Symbol
ICC
Condition
Min.
—
Typ.
15
Max.
Unit.
mA
mA
V
—
35
10
—
0.6
—
0.4
1
ISB
Top=–10 to +70
—
—
"H" Input Voltage
VIH
—
—
—
—
—
—
2.0
—
—
"L" Input Voltage
VIL
—
V
"H" Output Voltage
"L" Output Voltage
Input Leakage current
Output Leakage current
VOH
VOL
IIL
2.0
—
—
V
—
V
—
—
mA
mA
IOL
—
—
1
2/6
¡ Semiconductor
MSM9892L
PROGRAMMING/ERASE CHARACTERISTICS
Parameter
Programming/Erase Cycles
(per page)
Symbol
Condition
Min.
Typ.
Max.
Unit
Cycles
CEP
—
—
—
10,000
per page
Years
Data Retention Time
Write Disturb *1)
TDR
CPD
—
—
—
—
—
—
—
—
—
10
Bit error : None
Bit error : 1bit
Bit error : 3bits
20,000
50,000
100,000
Cycles
Cycles
Cycles
*1)
"WriteDisturb"meansaphenomenonthatfrequentwriteoperationsperformedtopages
in Flash memory may cause a data error in another page to which write operations are
not performed.
For example, 20,001 to 50,000 write operations performed onto pages other than page "n"
may cause a 1-bit error in page "n".
3/6
¡ Semiconductor
MSM9892L
APPLICATION CIRCUIT
DVDD
AVDD
DI
FDI
DI
DO
SCK
CS
FDO
DO
FSCK
FCS
SCK
CS
MCU
RESET
BUSY
FRESET
FPRT
RESET
PRT
MON
MSC1157
LIN
AOUT
SG
Voice input
LOUT
+
AMON
FIN
XT
XT
FOUT
ADIN
TEST0
TEST1
TEST2
DGND
AGND
4/6
¡ Semiconductor
MSM9892L
WRITE DISTURB
"Write Distrub" means a phenomenon that the change from digital "0" to "1" may occur in a Flash
memory page to which data is scarcely written.
The above change can be avoided by refreshing Flash memory data with the DTRW command
and WEND command of the MSM9888L/MSM9889L.
q DTRW command
w WEND command
ThiscommandmovessomeFlashmemory
page data to buffer.
This command programs buffer data to
Flash memory.
Buffer
Flash
Buffer
Flash
Page "n"
Page "n"
TIMING WHEN POWER IS ON
Refer to the MSM9888L/MSM9889L Data Sheet. If the timing diagrams described in the
MSM9888L/MSM9889L Data Sheet are not satisfied, errors such as "Recording is disabled" or
"Recorded message is erased" may occur.
5/6
¡ Semiconductor
MSM9892L
PACKAGE DIMENSIONS
(Unit : mm)
TSOPI28-P-813-0.55-K
MIRROR FINISH
Package material
Lead frame material
Pin treatment
Solder plate thickness
Package weight (g)
Epoxy resin
42 alloy
Solder plating
7 mm or more
0.27 TYP.
Notes for Mounting the Surface Mount Type Package
The SOP, QFP, TSOP, TQFP, LQFP, SOJ, QFJ (PLCC), SHP, and BGA are surface mount type
packages, which are very susceptible to heat in reflow mounting and humidity absorbed in
storage. Therefore, before you perform reflow mounting, contact Oki’s responsible sales person
ontheproductname,packagename,pinnumber,packagecodeanddesiredmountingconditions
(reflow method, temperature and times).
6/6
E2Y0002-29-11
NOTICE
1.
The information contained herein can change without notice owing to product and/or
technical improvements. Before using the product, please make sure that the information
being referred to is up-to-date.
2.
The outline of action and examples for application circuits described herein have been
chosen as an explanation for the standard action and performance of the product. When
planning to use the product, please ensure that the external conditions are reflected in the
actual circuit, assembly, and program designs.
3.
4.
When designing your product, please use our product below the specified maximum
ratings and within the specified operating ranges including, but not limited to, operating
voltage, power dissipation, and operating temperature.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or
unexpected operation resulting from misuse, neglect, improper installation, repair, alteration
or accident, improper handling, or unusual physical or electrical stress including, but not
limited to, exposure to parameters beyond the specified maximum ratings or operation
outside the specified operating range.
5.
6.
Neither indemnity against nor license of a third party’s industrial and intellectual property
right, etc. is granted by us in connection with the use of the product and/or the information
and drawings contained herein. No responsibility is assumed by us for any infringement
of a third party’s right which may result from the use thereof.
The products listed in this document are intended for use in general electronics equipment
for commercial applications (e.g., office automation, communication equipment,
measurement equipment, consumer electronics, etc.). These products are not authorized
for use in any system or application that requires special or enhanced quality and reliability
characteristics nor in any system or application where the failure of such system or
application may result in the loss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety
devices, aerospace equipment, nuclear power control, medical equipment, and life-support
systems.
7.
Certain products in this document may need government approval before they can be
exported to particular countries. The purchaser assumes the responsibility of determining
thelegalityofexportoftheseproductsandwilltakeappropriateandnecessarystepsattheir
own expense for these.
8.
9.
No part of the contents cotained herein may be reprinted or reproduced without our prior
permission.
MS-DOS is a registered trademark of Microsoft Corporation.
Copyright 1999 Oki Electric Industry Co., Ltd.
Printed in Japan
相关型号:
©2020 ICPDF网 联系我们和版权申明