OV00491-B69G-1C [OMNIVISION]

Rear View Camera;
OV00491-B69G-1C
型号: OV00491-B69G-1C
厂家: OMNIVISION TECHNOLOGIES, INC.    OMNIVISION TECHNOLOGIES, INC.
描述:

Rear View Camera

文件: 总2页 (文件大小:447K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
OV491 companion ISP product brief  
Compact Image Signal Processor For  
Surround View Automotive Imaging  
lead free  
available in  
a lead-free  
package  
OmniVision's OV491 is a compact image signal  
processor (ISP) companion chip that pairs with  
OmniVision's portfolio of automotive RAW image  
sensors for automotive imaging applications. The  
OV491 is ideally suited to streamline surround view  
system architectures with dual sensor input capability,  
and is compatible with OmniVision's OV2775, OV10650,  
and OV10640 automotive image sensors.  
(HDR) video up to 1080p resolution at 60 frames per  
second (fps), with dual sensor input processing  
capabilities up to 30 fps for compatible sensors.  
The OV491 comes in an AEC-Q100 Grade 2-qualified  
7 x 7 mm BGA package and contains an advanced set of  
safety mechanisms to enable ASIL rated camera  
systems.  
The OV491's support for dual sensor input enables a  
system with only two ISP companion chips to process  
four camera inputs, each up to two megapixels in  
resolution. The OV491 can process high dynamic range  
Find out more at www.ovt.com.  
Applications  
OV491  
¬
¬
¬
Rear View Camera  
Surround View System  
e-Mirror  
¬
¬
Camera Monitoring System (CMS)  
Advanced Driver Assistance System  
(ADAS)  
Ordering Information  
¬
OV00491-B69G-1C  
(lead-free, 169-pin BGA,  
packed in tray)  
¬ OV00491-B69G-TC  
(lead-free, 169-pin BGA,  
packed in tape and reel)  
Product Features  
¬
advanced 150Mp/s throughput ISP  
for high quality image capturing and  
video streaming  
¬
supports four-wire or two-wire serial  
interface to retrieve stored firmware  
from external memory devices,  
such as EEPROM  
Product Specifications  
¬
¬
¬
local and global tone mapping support  
up to 3-capture HDR combination  
¬
¬
¬
on-chip PLL to generate internal clocks  
on-chip voltage regulator 1.8V to 1.1V  
¬
power supply:  
¬
temperature range:  
- core: 1.1V ±5%  
- operating: -40°C to +105°C  
ambient temperature and  
-40°C to +125°C junction  
temperature  
simultaneous output of fully  
processed YUV for display-based  
applications and RAW for machine  
vision applications  
- I/O: 1.8V ±5% or 3.3V ±5%  
brown-out detection circuit and  
output flag  
¬
power requirements: 325 mW,  
measured at 1920x1080 @ 30 fps,  
12-bit plus 12-bit input from OV2775  
via MIPI interface and 1920x1080  
YUV422 output via MIPI interface  
¬
¬
¬
¬
¬
¬
¬
supports 2x2 lane MIPI RX/TX  
and 1x4 lane MIPI RX/TX  
¬
package dimensions: 7 mm x 7 mm  
¬
embedded information including  
frame counter, temperature, and  
register data for each image to  
enable critical automotive  
safety applications  
supports 12-bit DVP input,  
shared with MIPI RX  
supports 12-bit DVP output,  
shared with MIPI TX  
¬
¬
auto white balance (AWB)  
automatic exposure control (AEC) /  
automatic gain control (AGC)  
supports 24-bit DVP output,  
shared with BT1120 output  
¬
¬
supports statistics data of up to  
four user programmable ROIs  
embedded 32-bit RISC processor  
for high performance and flexibility  
SCCB master/slave interface for  
sensor and ASIC configuration  
supports 1K bits of one-time  
programmable memory (OTP)  
JTAG boundary scan  
Functional Block Diagram  
SPI  
flash  
UART I/F  
SPI I/F  
brown out  
OV491  
BT1120  
DVP OUT  
MIPI TX  
sensor 0  
sensor 0  
DVP IN  
sensor 0/1  
sensor 0/1  
HDR  
ISP  
embedded  
line  
IDC  
sensor 0/1  
MIPI RX  
SCCBM0  
SCCBM1  
NTSC  
SCCBS  
PLL  
video  
32 bits RISC CPU  
AWB  
AEC  
SDA/SCL  
boot  
ROM  
FSIN0  
FSIN1  
XCLK  
6 ~ 36 MHz  
tone  
mapping  
PRAM  
firmware  
temperature sensor  
JTAG  
regulator  
OmniVision reserves the right to make changes to their products or to discontinue any product or  
service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered  
trademarks of OmniVision Technologies, Inc. OmniBSI-2 is a trademark of OmniVision Technologies,  
Inc. All other trademarks are the property of their respective owners.  
4275 Burton Drive  
Santa Clara, CA 95054  
USA  
Tel: + 1 408 567 3000  
Fax: + 1 408 567 3001  
www.ovt.com  
Version 1.3, August, 2017  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY