A16L-JGM-12D-2P [OMRON]

Pushbutton Switch, DPDT, Momentary, 3A, 30VDC, Solder Terminal, Through Hole-straight;


型号：	A16L-JGM-12D-2P
厂家：	OMRON ELECTRONICS LLC
描述：	Pushbutton Switch, DPDT, Momentary, 3A, 30VDC, Solder Terminal, Through Hole-straight 光电二极管
文件：	总4页 (文件大小：483K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

A16□-P

Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)

CSM_A16_-P_DS_J_1_3

PCB Terminal Models

● Lever made of high heat resistant resin allowing automatic

soldering.

● Easy Panel and PCB mounting.

● Lever for easily mounting and removing the Socket Unit.

● The hold status can easily be checked from the rear of the

PCB.

● Short profile width of the separable type reduced to

28.3 mm.

Panel width can also be reduced.

RoHS Compliant

Refer to Safety Precautions for All Pushbutton Switches and

Safety Precautions on page 24.

List of Models

■Ordering as a Set......... The model numbers used to order sets of Units are given in the following tables. One set comprises the

Pushbutton, Lamp (lighted models only), Case, and Switch.

Models with PCB Terminals IP40

Item

Minimum

packing unit

Momentary operation (Self-resetting) *1

Pushbutton color symbol

Output

SPDT

Lighting

LED

Operating voltage

5 VDC

A16L-Δ@M-5D-1P

A16L-Δ@M-12D-1P

A16L-Δ@M-24D-1P

A16-Δ@M-1P

12 VAC/VDC

24 VAC/VDC

R: red

Y: yellow

PY: pure yellow

G: green

A: blue

W: white

B: black *2

Non-lighted

5 pcs

5 VDC

A16L-Δ@M-5D-2P

A16L-Δ@M-12D-2P

A16L-Δ@M-24D-2P

A16-Δ@M-2P

LED

12 VAC/VDC

24 VAC/VDC

DPDT

Non-lighted

Note: Contact your OMRON representative about Selector Switches and Key Selector Switches.

*1. Enter the desired shape for the Pushbutton in Δ: J (rectangular), A (square), or T (round). Enter the desired color symbol for the Pushbutton in the @.

*2. Black (“B”) Pushbuttons are only available for non-lighted models.

Models with PCB Terminals IP65

Item

Minimum

packing unit

Momentary operation (Self-resetting) *1

Pushbutton color symbol

Output

SPDT

Lighting

LED

Operating voltage

5 VDC

A165L-Δ@M-5D-1P

A165L-Δ@M-12D-1P

A165L-Δ@M-24D-1P

A165-Δ@M-1P

12 VAC/VDC

24 VAC/VDC

R: red

Y: yellow

PY: pure yellow

G: green

A: blue

W: white

B: black *2

Non-lighted

5 pcs

5 VDC

A165L-Δ@M-5D-2P

A165L-Δ@M-12D-2P

A165L-Δ@M-24D-2P

A165-Δ@M-2P

LED

12 VAC/VDC

24 VAC/VDC

DPDT

Non-lighted

Note: Contact your OMRON representative about Selector Switches and Key Selector Switches.

*1. Enter the desired shape for the Pushbutton in Δ: J (rectangular), A (square), or T (round). Enter the desired color symbol for the Pushbutton in the @.

*2. Black (“B”) Pushbuttons are only available for non-lighted models.

A16□-P

Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)

Specifications

■Approved Standard Ratings

●UL, cUL (File No. E41515)

■Characteristics

Type

Pushbutton Switch

Item

5 A at 125 VAC, 3 A at 25± VAC (general use)

3 A at 3± VDC (resistive)

Momentary operation: 12± operations/minute max.

Alternate operation: 6± operations/minute max. *1

2± operations/minute max. *1

Allowable

operating

frequency

Mechanical

Electrical

Note: Certification has been obtained for the

Socket Unit.

Insulation resistance

1±± MΩ min. (at 5±± VDC)

Between

●TÜV (EN6±947-5-1)

(Low Voltage Directive)

3 A at 25± VAC

terminals of

same polarity

Between

terminals of

different

1,±±± VAC, 5±/6± Hz for 1 minute

2,±±± VAC, 5±/6± Hz for 1 minute

Dielectric

strength

3 A at 3± VDC

polarity

●CCC (GB14±48.5)

5 A at 125 VAC

Between each

terminal and

ground

Between lamp

terminals

3 A at 25± VAC

1,±±± VAC, 5±/6± Hz for 1 minute *2

3 A at 3± VDC

Vibration

resistance

Malfunction

1± to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)

■Ratings

Destruction

Malfunction

5±± m/s²

Shock

resistance

● Contacts

15± m/s²max. (malfunction within 1 ms)

Momentary operation: 2,±±±,±±± operations min.

Alternate operation: 2±±,±±± operations min. *1

1±±,±±± operations min. *1

Rated voltage

125 VAC

Resistive load

Mechanical

Electrical

Durability

25± VAC

Electric shock protection

class

Class II

3± VDC

PTI (tracking characteristic)

Degree of contamination

Weight

Ambient operating

temperature

175

3 (IEC947-5-1)

Minimum applicable load: 1 mA at 5 VDC

Rated values are obtained from tests conducted

under the following conditions.

1. Load: Resistive load

2. Mounting conditions: No vibration and no shock

3. Temperature: 2± ±2°C

Approx. 12 g (in the case of a lighted DPDT switch with solder terminals)

–1±°C to +55°C (with no icing or condensation)

35% to 85%RH

Ambient operating humidity

4. Operating frequency: 2± operations/min

Ambient storage

temperature

–25°C to +65°C (with no icing or condensation)

● Contact Form

*1. Set and reset constitute one operation.

*2. With LED and incandescent lamp not mounted.

Name

Contact

Double-throw

COM

Dimensions

(Unit: mm)

28.3

Rectangular A16@-J@-@P

PCB terminals

9.5

26.4

23.1

21.1

1±.8

2.5

18.4 2±.4

6.3

±.5

Lock ring

Mounting nut

4.85 12.4 18.6

18 15.1

±.5

Packing (t±.5)

(for oil-resistant IP65 only)

 The Dimension shows 1-switch output.

 The lamp terminal is also provided with non-lighted models.

 A rectangular model is listed as an example.

 Unless specified, there is a tolerance of ±±.4mm for dimensions.

A16□-P

■Terminal Arrangement

Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)

● PCB Terminals (Lamp terminals are also present on non-lighted models.)

Lighted SPDT Switches

Lighted DPDT Switches

Terminal Arrangement

(Bottom View)

Side with TOP

indicated

Model, rating, and lot

number indication

Dimensions of

PCB Terminals

Side with TOP indicated

Dimensions of

PCB Terminals

5.3

3.5

L−

3.5

1.5

COM

SW 1

SW 2

SW 1

±.8

4.85

12.4

18.6

4.85

2.7

12.4

High heat resistant resin is used for the

Lever allowing dip soldering.

High heat resistant resin is used for

the Lever allowing dip soldering.

Lamp terminal (t=±.5)

18.6

Lamp terminal (t=±.5)

PCB Cutouts

(Bottom View)

PCB Cutouts

(Bottom View)

A±±.1

±.1

Side with TOP indicated

12.4 ±.±5

2± ±.1

4.85 ±.±5

2± ±.1

4.85 ±.±5

±.1

6.3 ±.±5

Two, 5 dia.

Five, 1 dia.

A = 24 min.: Rectangular

A = 21 min.: Square or round

L = 24 min.

Dimensions of A and L shall match the Panel cutouts.

Use t = 1.6 for the PCB.

6.3 ±.±5

Two, 5 dia.

A = 24 min.: Rectangular

A = 21 min.: Square or round

L = 24 min.

Use a PCB with a thickness of 1.6 mm.

Note: Secure the panel to the board using stud

bolts if force will be applied to the board

after wiring.

Note: Secure the panel to the board using stud bolts

if force will be applied to the board after wiring.

Eight, 1 dia.

■Panel Cutouts

● PCB Terminals

Precautions

● Refer to the Common Precautions for Pushbutton

Switches" for common precautions.

Square A16@-A/M16@-A

Round A16@-T/M16@-T

Rectangular A16@-J/M16@-J

(Top View)

A= (24 min.) ±.1

(Top View)

● Mounting multiple PCB Terminal Pushbutton Switches

Be careful with the pitch between the centers of mounting holes

when mounting multiple PCB Terminal Pushbutton Switches,

otherwise the Switches may be , resulting in malfunction.

Mounting Hole Dimensions of PCB Cutouts

16^+±.2dia.

A= (21 min.) ±.1

9.1 ±.±5

(24 min.) ±.1

14.7 ±.±5 dia.

5.1 ±.±5

(24 min.) ±.1

14.7 ±.±5 dia.

5.1 ±.±5

(Bottom View)

A3 ±.1

A2 ±.1

A1 ±.1

Note:  Make sure the thickness of the mounting panel is between ±.5 and 3.2

mm. If, however, a Switch Guard or Dust Cover is used, the thickness

of the mounting panel must be between ±.5 and 2 mm.

 If the panel is to be finished with coating, etc., make sure that the

panel meets the specified dimensions after coating.

Datum line

Mounting Hole Dimensions of the Panel Cutouts

(Top View)

A3 ±.1

A2 ±.1

A1 ±.1

Datum line

A16□-P

Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.)

• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.

• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad

systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious

influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or

equipment, and be sure to provide the system or equipment with double safety mechanisms.

Note: Do not use this document to operate the Unit.

OMRON Corporation

ELECTRONIC AND MECHANICAL COMPONENTS COMPANY

Contact: www.omron.com/ecb

Cat. No. A116-E1-04

±812(±2±7)(O)

相关型号：