A22L-CA-12A-20M [OMRON]
Pushbutton Switch, DPST, Momentary, 12VDC, Screw Terminal, Panel Mount;
| 型号： | A22L-CA-12A-20M |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Pushbutton Switch, DPST, Momentary, 12VDC, Screw Terminal, Panel Mount |
| 文件： | 总48页 (文件大小：1531K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Complete Assemblies
Pushbutton Switches -- 22 mm
A22
Install in 22-mm dia. or 25-mm dia.
Panel Cutout
H Locking lever ensures easy mounting
and removal of switch unit
H Increase wiring efficiency and decrease
mounting depth with three-row mounting
of switch unit contact blocks
H Finger protection mechanism on switch
unit provided as a standard feature
c
H Use optional 25-mm dia. ring to install in
25-mm dia. panel cutouts
H IP65 oil resistant: EN60947-5-1
This product was manufactured at OMRON Izumo. OMRON Izumo has obtained approvals
from international certification bodies for its quality system and environmental control system.
Ordering Information
J CONSTRUCTION
Operational Unit
• Available Colors
Non-illuminated:
Red, green, yellow, white, blue, black
Illuminated:
Red, green, yellow, white, blue
Lock
Lamp
• Light Source
LED Lamp
Incandescent Lamp
Switch Unit
• Contacts
SPST-NO, SPST-NC, SPST-NO + SPST-NC, DPST-NO, DPST-NC
• Lighting Method
Non-illuminated
Illuminated (without transformer)
Illuminated (with transformer)
(Illuminated model shown)
(Actual color of yellow pushbuttons more closely resembles amber than true yellow.)
2
A22
A22
J PART NUMBER LEGEND (COMPLETE ASSEMBLY)
Shipped as a set which includes the Operational Unit, LED (Illuminated type only), and switch unit with contact blocks.
1
2
3
4
5
6
A22j-jj-j-jj
5 Contacts
Code Description
1 Illuminated/Non-illuminated
Code Description
3 Operator Color
Code Description
10
01
11
20
02
SPST-NO
None Non-illuminated
R
G
Y
Red
SPST-NC
L
Illuminated
Green
Yellow
White
Blue
SPST-NO + SPST-NC
DPST-NO
W
A
2 Flange Shape
Non-illuminated
Code Description
DPST-NC
B
Black (for Non-illuminated
type only)
Note: SPST= Single Pole, Single Throw
DPST= Double Pole, Single Throw
F
Round/Flush
T
Round/Extended
4 Light Source
G
H
C
D
S
M
Round/Full-guard
6 Switch Action
Code Description
Without transformer
Round/Half-guard
Square/Extended
Code Rated Voltage
M
A
Momentary
Square/Full-guard
6D
LED 6 VDC
6 VAC
Latching (See note)
Round/Mushroom (30-mm dia.)
Round/Mushroom (40-mm dia.)
6A
12A
24A
12 VAC/DC
24 VAC/DC
Note: Also referred to as “Alternate
Action Switch Action.”
Illuminated
T
Round/Extended
With transformer
*1
*2
G
H
C
D
Round/Clear full-guard
Round/Half-guard
Square/Extended
Square/Full-guard
T1
T2
LED 110 VAC
220 VAC
*1) Operational voltage: 95 to 115 VAC
*2) Operational voltage: 190 to 230 VAC
Note: With Transformer types the LED lamp (24 VAC/DC) can
be lit by directly applying 110 VAC/DC (220 VAC/DC) to
the lamp terminal. The LED is the 24-VAC/DC type.
(Actual color of yellow pushbuttons more closely resembles amber than true yellow.)
3
A22
A22
J PUSHBUTTON SWITCH (COMPLETE ASSEMBLY)
Non-illuminated (Round Type)
Description
Part number
Momentary operation
A22-Fj-10M
A22-Fj-01M
A22-Fj-11M
A22-Fj-20M
A22-Fj-02M
A22-Tj-10M
A22-Tj-01M
A22-Tj-11M
A22-Tj-20M
A22-Tj-02M
A22-Gj-10M
A22-Gj-01M
A22-Gj-11M
A22-Gj-20M
A22-Gj-02M
A22-Hj-10M
A22-Hj-01M
A22-Hj-11M
A22-Hj-20M
A22-Hj-02M
A22-Sj-10M
A22-Sj-01M
A22-Sj-11M
A22-Sj-20M
A22-Sj-02M
A22-Mj-10M
Appearance
Round Flush type
Contacts
Operator color
Latching operation
A22-Fj-10A
A22-Fj-01A
A22-Fj-11A
A22-Fj-20A
A22-Fj-02A
A22-Tj-10A
A22-Tj-01A
A22-Tj-11A
A22-Tj-20A
A22-Tj-02A
A22-Gj-10A
A22-Gj-01A
A22-Gj-11A
A22-Gj-20A
A22-Gj-02A
A22-Hj-10A
A22-Hj-01A
A22-Hj-11A
A22-Hj-20A
A22-Hj-02A
A22-Sj-10A
A22-Sj-01A
A22-Sj-11A
A22-Sj-20A
A22-Sj-02A
A22-Mj-10A
Insert one of the
following letters into the
box j.
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
Round/Extended
type
SPST-NO
B (black)
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
Round/Full-guard
type
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
Round/Half-guard
type
Insert one of the
following letters into the
box j.
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
Small-size Mushroom
type (30-mm dia. head)
SPST-NO
B (black)
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
Medium-size Mushroom
type (40-mm dia head)
SPST-NO
SPST-NC
A22-Mj-01M
A22-Mj-11M
A22-Mj-20M
A22-Mj-02M
A22-Mj-01A
A22-Mj-11A
A22-Mj-20A
A22-Mj-02A
SPST-NO + SPST-NC
DPST-NO
DPST-NC
Non-illuminated (Square Type)
Description
Part number
Momentary operation
A22-Cj-10M
A22-Cj-01M
A22-Cj-11M
A22-Cj-20M
A22-Cj-02M
A22-Dj-10M
A22-Dj-01M
A22-Dj-11M
A22-Dj-20M
A22-Dj-02M
Appearance
Square/Extended
type
Contacts
Operator color
Latching operation
A22-Cj-10A
A22-Cj-01A
A22-Cj-11A
A22-Cj-20A
A22-Cj-02A
A22-Dj-10A
A22-Dj-01A
A22-Dj-11A
A22-Dj-20A
A22-Dj-02A
Insert one of the
following letters into the
box j.
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
Square/Full guard
type
B (black)
4
A22
A22
Illuminated (Round Type)
Description
Part number
Appearance
Contacts
Rated voltage
Illuminated
operator color
Momentary operation
Latching operation
Round/Extended
type
SPST-NO
SPST-NC
Insert one of
the following
letters into the
box j.
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
A22L-Tj-6D-10M
A22L-Tj-6A-10M
A22L-Tj-12A-10M
A22L-Tj-24A-10M
A22L-Tj-6D-01M
A22L-Tj-6A-01M
A22L-Tj-12A-01M
A22L-Tj-24A-01M
A22L-Tj-6D-11M
A22L-Tj-6A-11M
A22L-Tj-12A-11M
A22L-Tj-24A-11M
A22L-Tj-6D-20M
A22L-Tj-6A-20M
A22L-Tj-12A-20M
A22L-Tj-24A-20M
A22L-Tj-6D-02M
A22L-Tj-6A-02M
A22L-Tj-12A-02M
A22L-Tj-24A-02M
A22L-Tj-T1-10M
A22L-Tj-T2-10M
A22L-Tj-T1-01M
A22L-Tj-T2-01M
A22L-Tj-T1-11M
A22L-Tj-T2-11M
A22L-Tj-T1-20M
A22L-Tj-T2-20M
A22L-Tj-T1-02M
A22L-Tj-T2-02M
A22L-Hj-6D-10M
A22L-Hj-6A-10M
A22L-Hj-12A-10M
A22L-Hj-24A-10M
A22L-Hj-6D-01M
A22L-Hj-6A-01M
A22L-Hj-12A-01M
A22L-Hj-24A-01M
A22L-Hj-6D-11M
A22L-Hj-6A-11M
A22L-Hj-12A-11M
A22L-Hj-24A-11M
A22L-Tj-6D-10A
A22L-Tj-6A-10A
A22L-Tj-12A-10A
A22L-Tj-24A-10A
A22L-Tj-6D-01A
A22L-Tj-6A-01A
A22L-Tj-12A-01A
A22L-Tj-24A-01A
A22L-Tj-6D-11A
A22L-Tj-6A-11A
A22L-Tj-12A-11A
A22L-Tj-24A-11A
A22L-Tj-6D-20A
A22L-Tj-6A-20A
A22L-Tj-12A-20A
A22L-Tj-24A-20A
A22L-Tj-6D-02A
A22L-Tj-6A-02A
A22L-Tj-12A-02A
A22L-Tj-24A-02A
A22L-Tj-T1-10A
A22L-Tj-T2-10A
A22L-Tj-T1-01A
A22L-Tj-T2-01A
A22L-Tj-T1-11A
A22L-Tj-T2-11A
A22L-Tj-T1-20A
A22L-Tj-T2-20A
A22L-Tj-T1-02A
A22L-Tj-T2-02A
A22L-Hj-6D-10A
A22L-Hj-6A-10A
A22L-Hj-12A-10A
A22L-Hj-24A-10A
A22L-Hj-6D-01A
A22L-Hj-6A-01A
A22L-Hj-12A-01A
A22L-Hj-24A-01A
A22L-Hj-6D-11A
A22L-Hj-6A-11A
A22L-Hj-12A-11A
A22L-Hj-24A-11A
LED lighting
(Without
transformer)
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NO +
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
6 VDC
Round/Extended
type
SPST-NO
SPST-NC
LED transformer
lighting
(With transformer)
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
SPST-NO
Round/Half-guard
type
6 VAC
LED lighting
(Without
transformer)
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
SPST-NO +
SPST-NC
(This table continues on the next page.)
5
A22
A22
Ordering Information Table -- continued from previous page
Description
Part number
Appearance
Contacts
Rated voltage
Illuminated
operator color
Momentary operation
Latching operation
Round/Half-guard
type
DPST-NO
Insert one of
the following
letters into the
box j.
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
A22L-Hj-6D-20M
A22L-Hj-6A-20M
A22L-Hj-12A-20M
A22L-Hj-24A-20M
A22L-Hj-6D-02M
A22L-Hj-6A-02M
A22L-Hj-12A-02M
A22L-Hj-24A-02M
A22L-Hj-T1-10M
A22L-Hj-T2-10M
A22L-Hj-T1-01M
A22L-Hj-T2-01M
A22L-Hj-T1-11M
A22L-Hj-T2-11M
A22L-Hj-T1-20M
A22L-Hj-T2-20M
A22L-Hj-T1-02M
A22L-Hj-T2-02M
A22L-Gj-6D-10M
A22L-Gj-6A-10M
A22L-Gj-12A-10M
A22L-Gj-24A-10M
A22L-Gj-6D-01M
A22L-Gj-6A-01M
A22L-Gj-12A-01M
A22L-Gj-24A-01M
A22L-Gj-6D-11M
A22L-Gj-6A-11M
A22L-Gj-12A-11M
A22L-Gj-24A-11M
A22L-Gj-6D-20M
A22L-Gj-6A-20M
A22L-Gj-12A-20M
A22L-Gj-24A-20M
A22L-Gj-6D-02M
A22L-Gj-6A-02M
A22L-Gj-12A-02M
A22L-Gj-24A-02M
A22L-Gj-T1-10M
A22L-Gj-T2-10M
A22L-Gj-T1-01M
A22L-Gj-T2-01M
A22L-Gj-T1-11M
A22L-Gj-T2-11M
A22L-Gj-T1-20M
A22L-Gj-T2-20M
A22L-Gj-T1-02M
A22L-Gj-T2-02M
A22L-Hj-6D-20A
A22L-Hj-6A-20A
A22L-Hj-12A-20A
A22L-Hj-24A-20A
A22L-Hj-6D-02A
A22L-Hj-6A-02A
A22L-Hj-12A-02A
A22L-Hj-24A-02A
A22L-Hj-T1-10A
A22L-Hj-T2-10A
A22L-Hj-T1-01A
A22L-Hj-T2-01A
A22L-Hj-T1-11A
A22L-Hj-T2-11A
A22L-Hj-T1-20A
A22L-Hj-T2-20A
A22L-Hj-T1-02A
A22L-Hj-T2-02A
A22L-Gj-6D-10A
A22L-Gj-6A-10A
A22L-Gj-12A-10A
A22L-Gj-24A-10A
A22L-Gj-6D-01A
A22L-Gj-6A-01A
A22L-Gj-12A-01A
A22L-Gj-24A-01A
A22L-Gj-6D-11A
A22L-Gj-6A-11A
A22L-Gj-12A-11A
A22L-Gj-24A-11A
A22L-Gj-6D-20A
A22L-Gj-6A-20A
A22L-Gj-12A-20A
A22L-Gj-24A-20A
A22L-Gj-6D-02A
A22L-Gj-6A-02A
A22L-Gj-12A-02A
A22L-Gj-24A-02A
A22L-Gj-T1-10A
A22L-Gj-T2-10A
A22L-Gj-T1-01A
A22L-Gj-T2-01A
A22L-Gj-T1-11A
A22L-Gj-T2-11A
A22L-Gj-T1-20A
A22L-Gj-T2-20A
A22L-Gj-T1-02A
A22L-Gj-T2-02A
LED lighting
(Without transformer)
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
6 VDC
Round/Half-guard
type
SPST-NO
SPST-NC
LED lighting (With
transformer)
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
SPST-NO
Round/Clear
full-guard type
LED lighting
(Without transformer)
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NO +
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
Round/Clear
full-guard type
LED lighting
(With transformer)
SPST-NO
SPST-NC
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
6
A22
A22
Illuminated (Square Type)
Description
Part number
Appearance
Contacts
Rated voltage
Illuminated
operator color
Momentary operation
Latching operation
Square/Extended
type
SPST-NO
SPST-NC
Insert one of
the following
letters into the
box j.
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
A22L-Cj-6D-10M
A22L-Cj-6A-10M
A22L-Cj-12A-10M
A22L-Cj-24A-10M
A22L-Cj-6D-01M
A22L-Cj-6A-01M
A22L-Cj-12A-01M
A22L-Cj-24A-01M
A22L-Cj-6D-11M
A22L-Cj-6A-11M
A22L-Cj-12A-11M
A22L-Cj-24A-11M
A22L-Cj-6D-20M
A22L-Cj-6A-20M
A22L-Cj-12A-20M
A22L-Cj-24A-20M
A22L-Cj-6D-02M
A22L-Cj-6A-02M
A22L-Cj-12A-02M
A22L-Cj-24A-02M
A22L-Cj-T1-10M
A22L-Cj-T2-10M
A22L-Cj-T1-01M
A22L-Cj-T2-01M
A22L-Cj-T1-11M
A22L-Cj-T2-11M
A22L-Cj-T1-20M
A22L-Cj-T2-20M
A22L-Cj-T1-02M
A22L-Cj-T2-02M
A22L-Cj-6D-10A
A22L-Cj-6A-10A
A22L-Cj-12A-10A
A22L-Cj-24A-10A
A22L-Cj-6D-01A
A22L-Cj-6A-01A
A22L-Cj-12A-01A
A22L-Cj-24A-01A
A22L-Cj-6D-11A
A22L-Cj-6A-11A
A22L-Cj-12A-11A
A22L-Cj-24A-11A
A22L-Cj-6D-20A
A22L-Cj-6A-20A
A22L-Cj-12A-20A
A22L-Cj-24A-20A
A22L-Cj-6D-02A
A22L-Cj-6A-02A
A22L-Cj-12A-02A
A22L-Cj-24A-02A
A22L-Cj-T1-10A
A22L-Cj-T2-10A
A22L-Cj-T1-01A
A22L-Cj-T2-01A
A22L-Cj-T1-11A
A22L-Cj-T2-11A
A22L-Cj-T1-20A
A22L-Cj-T2-20A
A22L-Cj-T1-02A
A22L-Cj-T2-02A
LED lighting
(Without transformer)
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NO +
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
Square/Extended
type
SPST-NO
SPST-NC
LED lighting
(With transformer)
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
(This table continues on the next page.)
7
A22
A22
Ordering Information Table -- continued from previous page
Description
Part number
Appearance
Contacts
Rated voltage
Illuminated
operator color
Momentary operation
Latching operation
Square/Full-guard type SPST-NO
LED lighting
(Without transformer)
Insert one of
the following
letters into the
box j.
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
A22L-Dj-6D-10M
A22L-Dj-6A-10M
A22L-Dj-12A-10M
A22L-Dj-24A-10M
A22L-Dj-6D-01M
A22L-Dj-6A-01M
A22L-Dj-12A-01M
A22L-Dj-24A-01M
A22L-Dj-6D-11M
A22L-Dj-6A-11M
A22L-Dj-12A-11M
A22L-Dj-24A-11M
A22L-Dj-6D-20M
A22L-Dj-6A-20M
A22L-Dj-12A-20M
A22L-Dj-24A-20M
A22L-Dj-6D-02M
A22L-Dj-6A-02M
A22L-Dj-12A-02M
A22L-Dj-24A-02M
A22L-Dj-T1-10M
A22L-Dj-T2-10M
A22L-Dj-T1-01M
A22L-Dj-T2-01M
A22L-Dj-T1-11M
A22L-Dj-T2-11M
A22L-Dj-T1-20M
A22L-Dj-T2-20M
A22L-Dj-T1-02M
A22L-Dj-T2-02M
A22L-Dj-6D-10A
A22L-Dj-6A-10A
A22L-Dj-12A-10A
A22L-Dj-24A-10A
A22L-Dj-6D-01A
A22L-Dj-6A-01A
A22L-Dj-12A-01A
A22L-Dj-24A-01A
A22L-Dj-6D-11A
A22L-Dj-6A-11A
A22L-Dj-12A-11A
A22L-Dj-24A-11A
A22L-Dj-6D-20A
A22L-Dj-6A-20A
A22L-Dj-12A-20A
A22L-Dj-24A-20A
A22L-Dj-6D-02A
A22L-Dj-6A-02A
A22L-Dj-12A-02A
A22L-Dj-24A-02A
A22L-Dj-T1-10A
A22L-Dj-T2-10A
A22L-Dj-T1-01A
A22L-Dj-T2-01A
A22L-Dj-T1-11A
A22L-Dj-T2-11A
A22L-Dj-T1-20A
A22L-Dj-T2-20A
A22L-Dj-T1-02A
A22L-Dj-T2-02A
R (red)
Y (yellow)
G (green)
W (white)
A (blue)
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NO +
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
Square/Full-guard type
LED lighting
(Without transformer)
SPST-NO
SPST-NC
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
8
A22
A22
Dimensions
Unit: mm (inch)
Note: 1. The following illustrations are for momentary operation.
2. Latching operation models are 9.2 mm (0.36 in) longer.
3. Illuminated models have the same dimensions as shown below, whether they are with transformers or without transformers.
J ILLUMINATED/NON-ILLUMINATED PUSHBUTTON SWITCHES
Flush Type
A22-F
For SPST-NO (SPST-NC) Switches
For DPST-NO (DPST-NC) Monoblock-contact Switches
36
(1.42)
34
(1.34)
44
(1.73)
29.7 dia.
(1.17)
29.7 dia.
(1.17)
30
(1.18)
5.9
(0.23)
0.5
5.9
12
(0.47)
(0.23)
12
(0.47)
72.7 (2.86)
(See note 2)
54.7 (2.15)
(See note 2)
Half-guard Type
A22-H, A22L-H
Extended Type
A22-T, A22L-T
18.5
(0.73)
29.7 dia.
(1.17)
34
(1.34)
23.9 dia.
34
(1.34)
29.7 dia.
(1.17)
(0.94)
1.8
0.5
5.9
(0.23)
5.9
19
(0.75)
54.7 (2.15)
(See note 2)
(0.23)
12
(0.47)
54.7 (2.15)
(See note 2)
Full-guard Type
A22-G, A22L-G
40-dia. Mushroom Type
A22-M
34
(1.34)
29.7 dia.
(1.17)
34
(1.34)
40 dia.
(1.57)
1.8
1.8
0.5
5.9
5.9
(0.23)
(0.23)
19
(0.75)
54.7 (2.15)
(See note 2)
32
(1.26)
54.7 (2.15)
(See note 2)
Square/Extended Type
A22-C, A22L-C
Square Flush Type
A22-D, A22L-D
29.8 x 29.8
(1.17 x 1.17)
29.8 x 29.8
(1.17 x 1.17)
34
(1.34)
34
(1.34)
25.6 x 25.6
1.8
1.8
(1.01 x 1.01)
5.9
5.9
12
(0.47)
(0.23)
(0.23)
54.7 (2.15)
(See note 2)
19
(0.75)
18
(0.71)
54.7 (2.15)
(See note 2)
9
A22
A22
J TERMINAL ARRANGEMENT
Terminal Arrangement (Bottom View)
Non-illuminated (SPST-NO + SPST-NC)
Illuminated (SPST-NO + SPST-NC)
Non-illuminated (DPST-NO + DPST-NC)
20.7
(0.82)
10
(0.39)
20.7
(0.82)
Contact Blocks
16.7
(0.66)
12
(0.47)
22
(0.87)
32
(1.26)
Lamp Socket
Contact Blocks
Contact Blocks
J TERMINAL CONNECTION
J PANEL CUTOUT DIMENSIONS
Type
Terminal connection
Bottom view
Non-illuminated
(SPST-NO +
SPST-NC)
25+0.5 dia.
22.3+0.4 dia.
0
0
Note: When applying a coating such as paint to a panel, the
dimensions should be those after the application of the
coating.
Bottom view
Non-illuminated
(DPST-NO +
DPST-NC)
A lock fitting is provided as a standard item.
Illuminated without
transformer
Bottom view
Bottom view
(SPST-NO +
SPST-NC)
Illuminated with
transformer
(SPST-NO +
SPST-NC)
Note: For additional specifications and information refer to the Common to all assemblies section at the end of this publication.
10
Complete Assemblies
Knob-type Selector Switch
A22S/W
Install in 22-mm dia. or 25-mm dia.
Panel Cutout
H Illuminated and Non-illuminated models
H Locking lever ensures easy mounting
and removal of switch unit
H Increase wiring efficiency and decrease
mounting depth with three-row mounting
of switch unit contact blocks
H Finger-safe contact blocks
H Use optional 25-mm dia. ring to install
in 25-mm dia. panel cutouts
c
H IP65
This product was manufactured at OMRON Izumo. OMRON Izumo has obtained approvals
from international certification bodies for its quality system and environmental control system.
Ordering Information
J CONSTRUCTION
Operational Unit
umber of Positions:
Positions/3 Positions
pplicable Colors
on-illuminated: Black
luminated: Red, green, yellow, blue
Lock Fitt
amp
Light Source
LED Lamp
Incandescent Lamp
Switch Unit
Contacts
SPST-NO, SPST-NC, SPST-NO + SPST-NC, DPST-NO, DPST-NC
Lighting Method
Non-illuminated
Illuminated (without transformer)
Illuminated (with transformer)
11
A22S/W
A22S/W
J PART NUMBER LEGEND
Shipped as a set which includes the Operational Unit, LED (Illuminated Type only), and Switch Unit.
1
2
3
4
5
A22j-jj-j-j
1 Illuminated/Non-illuminated
Code Description
3 Operator Color
Code Description
None Non-illuminated
5 Contacts
Code Description
S
Non-illuminated
Illuminated
10
01
11
20
02
SPST-NO (*)
SPST-NC (*)
W
R
G
Y
A
Red
SPST-NO + SPST-NC
DPST-NO
Green
Yellow
Blue
DPST-NC
Note: * for models with 2 Positions only
2 Number of Positions/Reset Method
Note: SPST= Single Pole, Single Throw
DPST= Double Pole, Single Throw
Code Description
4 Light Source
2M
2A
3M
3A
2 Positions/Maintained
2 Positions/Spring return
3 Positions/Maintained
3 Positions/Spring return
Without transformer
Code Rated Voltage
None Non-illuminated
6D
LED 6 VDC
6 VAC
C2M 2 Positions/Maintained extended lever
6A
C2A 2 Positions/Spring return extended lever
C3M 3 Positions/Maintained extended lever
C3A 3 Positions/Spring return extended lever
12A
24A
12 VAC/DC
24 VAC/DC
With transformer
None Non-illuminated
*1
*2
T1
T2
LED 110 VAC
220 VAC
*1) Operational voltage: 95 to 115 VAC
*2) Operational voltage: 190 to 230 VAC
Note: With transformer types, the LED lamp
(24 VAC/DC) can be lit by directly applying
110 VAC/DC (220 VAC/DC) to the lamp
terminal. The LED is a 24-VAC/DC type.
(Actual color of yellow selector switches more closely resembles amber than true yellow.)
12
A22S/W
A22S/W
J KNOB-TYPE SELECTOR SWITCH
Non-illuminated
Appearance
Positions
Operating
method
Maintained
Contacts
Operator color
Black
Part number
Knob-type selector switch
2 positions
SPST-NO
A22S-2M-10
A22S-2M-01
A22S-2M-11
A22S-2M-20
A22S-2M-02
A22S-2A-10
A22S-2A-01
A22S-2A-11
A22S-2A-20
A22S-2A-02
A22S-3M-11
A22S-3M-20
A22S-3M-02
A22S-3A-11
A22S-3A-20
A22S-3A-02
A22S-C2M-10
A22S-C2M-01
A22S-C2M-11
A22S-C2M-20
A22S-C2M-02
A22S-C2A-10
A22S-C2A-01
A22S-C2A-11
A22S-C2A-20
A22S-C2A-02
A22S-C3M-11
A22S-C3M-20
A22S-C3M-02
A22S-C3A-11
A22S-C3A-20
A22S-C3A-02
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO + SPST-NC
DPST-NO
DPST-NC
SPST-NO + SPST-NC
DPST-NO
Spring return
3 positions
2 positions
Maintained
Spring return
Maintained
Extended lever knob-type
selector switch
Black
Spring return
3 positions
Maintained
Spring return
DPST-NC
13
A22S/W
A22S/W
Illuminated (Without Transformer)
Appearance
Positions
Operating
method
Contacts
Rated voltage Operator
color
Part number
Knob-type selector switch
2 positions
Maintained
SPST-NO
Insert one of
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
A22W-2Mj-6D-10
A22W-2Mj-6A-10
A22W-2Mj-12A-10
A22W-2Mj-24A-10
A22W-2Mj-6D-01
A22W-2Mj-6A-01
A22W-2Mj-12A-01
A22W-2Mj-24A-01
A22W-2Mj-6D-11
A22W-2Mj-6A-11
A22W-2Mj-12A-11
A22W-2Mj-24A-11
A22W-2Mj-6D-20
A22W-2Mj-6A-20
A22W-2Mj-12A-20
A22W-2Mj-24A-20
A22W-2Mj-6D-02
A22W-2Mj-6A-02
A22W-2Mj-12A-02
A22W-2Mj-24A-02
A22W-2Aj-6D-10
A22W-2Aj-6A-10
A22W-2Aj-12A-10
A22W-2Aj-24A-10
A22W-2Aj-6D-01
A22W-2Aj-6A-01
A22W-2Aj-12A-01
A22W-2Aj-24A-01
A22W-2Aj-6D-11
A22W-2Aj-6A-11
A22W-2Aj-12A-11
A22W-2Aj-24A-11
A22W-2Aj-6D-20
A22W-2Aj-6A-20
A22W-2Aj-12A-20
A22W-2Aj-24A-20
A22W-2Aj-6D-02
A22W-2Aj-6A-02
A22W-2Aj-12A-02
A22W-2Aj-24A-02
the following
letters into
the box j.
LED lighting
(without transformer)
R (red)
Y (yellow)
G (green)
A (blue)
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NO +
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
Spring return
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
SPST-NO +
SPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
(This table continues on the next page.)
14
A22S/W
A22S/W
Ordering Information Table -- continued from previous page
Appearance
Positions
Operating
method
Contacts
Rated voltage Operator
color
Part number
Knob-type selector switch
3 positions
Maintained
SPST-NO +
SPST-NC
Insert one of
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
A22W-3Mj-6D-11
A22W-3Mj-6A-11
A22W-3Mj-12A-11
A22W-3Mj-24A-11
A22W-3Mj-6D-20
A22W-3Mj-6A-20
A22W-3Mj-12A-20
A22W-3Mj-24A-20
A22W-3Mj-6D-02
A22W-3Mj-6A-02
A22W-3Mj-12A-02
A22W-3Mj-24A-02
A22W-3Aj-6D-11
A22W-3Aj-6A-11
A22W-3Aj-12A-11
A22W-3Aj-24A-11
A22W-3Aj-6D-20
A22W-3Aj-6A-20
A22W-3Aj-12A-20
A22W-3Aj-24A-20
A22W-3Aj-6D-02
A22W-3Aj-6A-02
A22W-3Aj-12A-02
A22W-3Aj-24A-02
the following
letters into
the box j.
LED lighting
(without transformer)
R (red)
Y (yellow)
G (green)
A (blue)
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
Knob-type selector switch
3 positions
Spring return
SPST-NO +
SPST-NC
Insert one of
the following
letters into
6 VAC
LED lighting
(without transformer)
12 VAC/DC
24 VAC/DC
6 VDC
the box j.
R (red)
Y (yellow)
G (green)
A (blue)
DPST-NO
DPST-NC
6 VAC
12 VAC/DC
24 VAC/DC
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
15
A22S/W
A22S/W
Illuminated (With Transformer)
Appearance
Positions
Operating
method
Contacts
Rated voltage Operator
color
Part number
Knob-type selector switch
2 positions
Maintained
SPST-NO
Insert one of
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
110 VAC
220 VAC
A22W-2Mj-T1-10
A22W-2Mj-T2-10
A22W-2Mj-T1-01
A22W-2Mj-T2-01
A22W-2Mj-T1-11
A22W-2Mj-T2-11
A22W-2Mj-T1-20
A22W-2Mj-T2-20
A22W-2Mj-T1-02
A22W-2Mj-T2-02
A22W-2Aj-T1-10
A22W-2Aj-T2-10
A22W-2Aj-T1-01
A22W-2Aj-T2-01
A22W-2Aj-T1-11
A22W-2Aj-T2-11
A22W-2Aj-T1-20
A22W-2Aj-T2-20
A22W-2Aj-T1-02
A22W-2Aj-T2-02
A22W-3Mj-T1-11
A22W-3Mj-T2-11
A22W-3Mj-T1-20
A22W-3Mj-T2-20
A22W-3Mj-T1-02
A22W-3Mj-T2-02
A22W-3Aj-T1-11
A22W-3Aj-T2-11
A22W-3Aj-T1-20
A22W-3Aj-T2-20
A22W-3Aj-T1-02
A22W-3Aj-T2-02
the following
letters into
the box j.
LED lighting
(with transformer)
SPST-NC
R (red)
Y (yellow)
G (green)
A (blue)
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
SPST-NO
SPST-NC
Spring return
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
3 positions
Maintained
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
Spring return
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
16
A22S/W
A22S/W
Dimensions
Unit: mm (inch)
J KNOB-TYPE SELECTOR SWITCH (ILLUMINATED/NON-ILLUMINATED)
A22S-S
34
(1.34)
30 dia
(1.18)
1.8
5.8
(0.23)
54.7
(2.15)
12
(0.47)
26.2
(1.03)
A22S-C3
29 dia.
(1.14)
30 dia
(1.18)
39
(1.53)
0.5
1.8
12
P = 1
M22
5.9
13.5
26.2
(1.03)
22
(0.87)
29
(1.14)
A22S-C2
30 dia
(1.18)
29 dia.
(1.14)
29
(1.14)
0.5
1.8
12
5.9
13.5
26.2
(1.03)
22
(0.87)
39 (1.53)
17
A22S/W
A22S/W
J TERMINAL ARRANGEMENT
J TERMINAL CONNECTION
Terminal Arrangement (Bottom View)
Type
Connection diagram
Bottom view
Non-illuminated
Illuminated
(SPST-NO + SPST-NC)
Non-illuminated
(SPST-NO + SPST-NC)
20.7
(0.82)
10
(0.40)
Contact
Blocks
Bottom view
Bottom view
Illuminated
without
transformer
16.7
(0.66)
22
(0.87)
Illuminated with
transformer
Lamp Socket
Contact Blocks
J PANEL CUTOUT DIMENSIONS
Note: The above terminal connection diagrams are examples for
SPST-NO + SPST-NC.
25+0.5 dia.
22.3+0.4 dia.
0
0
Note: When applying a coating such as paint to a panel, the
dimensions should be those after the application of the
coating.
A lock fitting is provided as a standard item.
J CONTACT CONFIGURATION
2-Position Type
Knob position
SPST-NO
SPST-NC
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
3-Position Type
Knob position
SPST-NO + SPST-NC
DPST-NO
DPST-NC
Note: For additional specifications and information refer to the Common to all assemblies section at the end of this publication.
18
Complete Assemblies
Key-Type Selector Switch
A22K
Install in 22-mm dia. or 25-mm dia.
Panel Cutout
H Locking lever ensures easy mounting
and removal of switch unit
H Increase wiring efficiency and decrease
mounting depth with three-row mounting
of switch unit contact blocks
H Finger-safe contacts
H Use optional 25-mm dia. ring to install
in 25-mm dia. panel cutouts
c
H Install using either round, forked crimp
terminals, or ferrules
H IP65 oil resistant: EN60947-5-1
This product was manufactured at OMRON Izumo. OMRON Izumo has obtained
approvals from international certification bodies for its quality system and environmental
control system.
Ordering Information
J CONSTRUCTION
erational Unit
umber of Positions
2 Positions/3 Positions
ey Release Position
2 Positions
3 Positions
Lock
Switch Unit
• Contacts
SPST-NO, SPST-NC, SPST-NO + SPST-NC, DPST-NO, DPST-NC
19
A22K
A22K
J PART NUMBER LEGEND
Shipped as a set which includes the Operational Unit and Switch Unit with contact blocks.
1
2
A22K-j-j
1 Number of Positions/Reset Method
2 Contacts
Code Positions
Reset
Key release
Code Description
method
position
10
01
11
20
02
SPST-NO (*)
SPST-NC (*)
SPST-NO + SPST-NC
DPST-NO
2ML 2 positions Maintained
2M
Left
Left and right
Left
Spring return
2AL
DPST-NC
3ML 3 positions Maintained
Left
Note: * for models with 2 Positions
3M
Left and right
Center
3MC
Note: SPST= Single Pole, Single Throw
DPST= Double Pole, Single Throw
Spring return
3AC
Center
20
A22K
A22K
J KEY-TYPE SELECTOR SWITCH
Appearance
Positions
Operator type
Contacts
Key release
position
Color of
Operational
Unit
Part number
Key-type selector switch
2 positions
Maintained
SPST-NO
Black
A22K-2ML-10
A22K-2M-10
A22K-2ML-01
A22K-2M-01
A22K-2ML-11
A22K-2M-11
A22K-2ML-20
A22K-2M-20
A22K-2ML-02
A22K-2M-02
SPST-NC
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
Spring return
Maintained
SPST-NO
SPST-NC
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
SPST-NO +
SPST-NC
A22K-2AL-10
A22K-2AL-01
A22K-2AL-11
A22K-2AL-20
A22K-2AL-02
A22K-3ML-11
3 positions
A22K-3M-11
A22K-3MC-11
A22K-3ML-20
A22K-3M-20
A22K-3MC-20
A22K-3ML-02
A22K-3M-02
A22K-3MC-02
A22K-3AC-11
A22K-3AC-20
A22K-3AC-02
DPST-NO
DPST-NC
Spring return
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
21
A22K
A22K
Dimensions
Unit: mm (inch)
J KEY-TYPE SELECTOR SWITCH
A22K
34
(1.34)
30 dia.
(1.18)
54.7
(2.15)
25.5
(1.00)
23.7
(0.93)
12
(0.47)
J TERMINAL ARRANGEMENT
J TERMINAL CONNECTION
Terminal Arrangement (Bottom View)
Type
Terminal connection
Bottom view
Non-illuminated (SPST-NO + SPST-NC)
Non-illuminated
20.7
(0.81)
16.7
(0.66)
Note: The above terminal connection diagrams are examples for
SPST-NO + SPST-NC.
Switch Unit
J PANEL CUTOUT DIMENSIONS
25+0.5 dia.
22.3+0.4 dia.
0
0
Note: When applying a coating such as paint to a panel, the
dimensions should be those after the application of the
coating.
A lock fitting is provided as a standard item.
22
A22K
A22K
J CONTACT CONFIGURATION
2-Position Type
Knob position
SPST-NO
SPST-NC
SPST-NO +
SPST-NC
DPST-NO
DPST-NC
3-Position Type
Knob position
SPST-NO + SPST-NC
DPST-NO
DPST-NC
Note: For additional specifications and information refer to the Common to all assemblies section at the end of this publication.
23
Complete Assemblies
Pilot Lights -- 22 mm
M22
22-mm dia. and 25-mm dia. Round
and Square Indicators
H Locking lever ensures easy mounting
and removal of switch unit
H Use optional 25-mm dia. ring to install in
25-mm dia. panel cutouts
H Finger protection mechanism on Lamp
Unit provided as a standard feature
H IP65 oil resistant: EN60947-5-1
c
This product was manufactured at OMRON Izumo. OMRON Izumo has obtained
approvals from international certification bodies for its quality system and environmental
control system.
Ordering Information
J CONSTRUCTION
Indicator Unit
Available Colors
Red, green, yellow, white, blue
Lock Fittin
Lamp
• Light source
LED Lamp
Incandescent Lamp
Lamp Socket
• Lighting Method
Illuminated (without transformer)
Illuminated (with transformer)
(Actual color of yellow pushbuttons more closely resembles amber than true yellow.)
24
M22
M22
J PART NUMBER LEGEND
Shipped as a set which includes the Operational Unit, LED, and Lamp Socket.
1
2
3
M22-jj-j
1 Flange Shape
2 Illumination Color
3 Light Source
Code Description
Code Description
Without transformer
Code Operating voltage
F
Round/Flush
R
G
Y
Red
C
Square/Extended
Green
Yellow
White
Blue
6D
LED
6 VDC
6A
6 VAC
W
A
12A
24A
12 VAC/DC
24 VAC/DC
With transformer
T1
T2
LED
110 VAC
220 VAC
Note: With the transformer types, LED lamp
(24 VAC/DC) can be lit by directly applying
110 VAC/DC (220 VAC/DC) to the lamp
terminal. The LED is 24-VAC/DC type.
(Actual color of yellow pushbuttons more closely resembles amber than true yellow.)
J M22 INDICATOR
Appearance
Round/Flush
Without transformer
Lighting
LED
Rated voltage
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
Operator color
Part number
M22-Fj-6D
M22-Fj-6A
M22-Fj-12A
M22-Fj-24A
M22-Fj-T1
Insert one of the
following letters
into the box j.
R (red)
Y (yellow)
G (green)
W (white)
A (blue
Round/Flush
With transformer
LED
LED
220 VAC
M22-Fj-T2
Square/Extended
Without transformer
6 VDC
6 VAC
12 VAC/DC
24 VAC/DC
110 VAC
M22-Cj-6D
M22-Cj-6A
M22-Cj-12A
M22-Cj-24A
M22-Cj-T1
Square/Extended
With transformer
LED
220 VAC
M22-Cj-T2
Note: To order Incandescent versions of the M22 Pilot Light, replace the last two digits in the part number (ie, 12A, 24A, T1) with the
appropriate code from table 3 of the Part Number Legend at the top of the page.
Example: M22-FR-24 is a red, round indicator with 24 VAC incandescent light source.
25
M22
M22
Specifications
J RATINGS
LED Lamp
Rated voltage
6 VDC
Rated current
60 mA
Operating voltage
6 VDC±5%
6 VAC/DC
12 VAC/DC
24 VAC/DC
60 mA
6 VAC/DC±5%
12 VAC/DC±5%
24 VAC/DC±5%
30 mA
15 mA
Transformer Lighting
Rated voltage
110 VAC
Operational voltage
95 to 115 VAC
Applicable lamp (BA9S/13j gold)
LED Lamp (A22-24j)
220 VAC
190 to 230 VAC
J APPROVED STANDARDS
Recognized organization
UL, cUL (See note)
ASTA
Standards
UL508
File No.
E41515
—
EN60947-5-1
Note: UL: CSA C22 No. 14
Dimensions
Unit: mm (inch)
J INDICATORS
Flush
M22-F
Square
M22-C
34
(1.34)
34
(1.34)
25.6 x 25.6
(1.01 x 1.01)
29.7 dia.
(1.17)
29.8 x 29.8
(1.17 x 1.17)
1.8
5.9
(0.23)
5.9
(0.23)
54.7
(2.15)
18
(0.71)
54.7
(2.15)
16
(0.63)
26
M22
M22
J TERMINAL ARRANGEMENT
J TERMINAL CONNECTION
Terminal Arrangement (Bottom View)
Without transformer
Bottom view
With transformer
Top view
Without transformer/With transformer
22
(0.87)
Lamp Socket
J PANEL CUTOUT DIMENSIONS
25+0.5 dia.
22.3+0.4 dia.
0
0
(0.98+0.02
)
+0.02
(0.88
)
0
0
Note: When applying a coating such as paint to a panel, the
dimensions should be those after the application of the
coating. A lock fitting is provided as a standard item.
Note: For additional specifications and information refer to the Common to all assemblies section at the end of this publication.
27
Common To all Assemblies
Common To All Assemblies
Specifications
J APPROVED STANDARDS
Recognized organization
UL, cUL (See note)
ASTA
Standards
UL508
File No.
E41515
—
EN60947-5-1
Note: UL: CSA C22 No. 14
J RATINGS
Contacts (General-purpose Load)
Rated current (A)
Rated carry
current
Rated
voltage
Utilization category
AC15 (inductive load)
10
5
AC12 (resistive load)
DC13 (inductive load)
—
DC12 (resistive load)
—
10 amps
24 VAC
10
10
6
110 VAC
220 VAC
380 VAC
440 VAC
24 VDC
110 VDC
220 VDC
380 VDC
3
2
1
—
3
2
—
1.5
0.5
0.2
0.1
10
2
0.6
0.2
Note: 1. Rated current values are determined according to the testing conditions specified by JIS C4520. The above ratings were
obtained by conducting tests under the following conditions as specified by JIS C4505.
(1) Ambient temperature: 20°±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 20 operations/min
2. Minimum applied load: 10 mA, 5 VDC
Contacts (Microload)
Rated applied load
Minimum applied load
1 mA, 5 VDC
50 mA, 5 VDC (Resistive load)
LED Indicators without Transformer
Rated voltage
6 VDC
Rated current
60 mA
Operating voltage
6 VDC±5%
6 VAC
60 mA
6 VAC/DC±5%
12 VAC/DC±5%
24 VAC/DC±5%
12 VAC/DC
24 VAC/DC
30 mA
15 mA
Transformer Lighting
Rated voltage
110 VAC
Operational voltage
95 to 115 VAC
Applicable lamp (BA8S/13j gold)
LED Lamp (A22-24Aj)
220 VAC
190 to 230 VAC
28
Common To All Assemblies
Common To All Assemblies
J CHARACTERISTICS
Pushbutton switches
Emergency stop switches
Knob-type selector switches
Key-type
selector
switch
Item
Non-illuminated Illuminated
Non-illuminated Illuminated
models: A22E models:
A22EL
Non-illuminated Illuminated
models: A22S models:
A22W
Non-illuminated
models: A22K
models:
models:
A22L-T,
A22L-G,
A22-F, A22-T,
A22-G,
A22-S, A22-C, A22L-H,
A22-D,
A22L-D,
A22-H, A22-M A22L-C
Allowable
operating
frequency
Mechanical Momentary operation:
60 operations/min max.
30 operations/min max.
Manual release: 30 operations/min max.
Automatic release: 30 operations/min max.
30 operations/min max.
Electrical
30 operations/min max.
Insulation resistance
Dielectric strength
100 MΩ min. (at 500 VDC)
2,500 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,500 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and
ground
Vibration resistance
(See note 2)
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
2
2
2
2
2
2
2
Shock
resistance
Mechanical 1,000 m/s
{100G}
1,000 m/s
{100G}
600 m/s
1,000 m/s {100G}
1,000 m/s
{100G}
1,000 m/s
1,000 m/s
{100G}
600 m/s
1,000 m/s
{100G}
1,000 m/s
2
2
2
2
2
Malfunction 1,000 m/s
(See note 2) {100G} max.
250 m/s {25G} max.
{60G} max.
{100G} max.
{60G} max. {100G} max.
Life
expectancy
Mechanical Momentary operation:
5,000,000 operations min.
Momentary operation:
300,000 operations min.
500,000
operations
min.
100,000
operations
min.
500,000
operations
min.
Electrical
500,000 operations min.
300,000
operations
min.
300,000
operations
min.
500,000
operations
min.
100,000
operations
min.
500,000
operations
min.
Ambient temperature
(See note 1 )
Operating:
Operating:
Operating:
Operating:
Operating:
Operating:
Operating:
-20°C to 70°C
(-4°F to
-20°C to 70°C -20°C to
-20°C to 70°C -20°C to
-20°C to 70°C -20°C to
(-4°F to
158°F)
55°C
(-4°F to
131°F)
(-4°F to
158°F)
55°C (-4°F
to 131°F)
Storage:
(-4°F to
158°F)
55°C (-4°F
to 131°F)
Storage:
158°F)
Storage:
Storage:
Storage:
Storage:
-40°C to 70°C
-40°C to 70°C Storage:
-40°C to 70°C -40°C to
-40°C to 70°C -40°C to
(-40°F to
158°F)
-40°C to
70°C (-40°F 158°F)
to 158°F)
(-40°F to
70°C (-40°F (-40°F to
to 158°F) 158°F)
70°C (-40°F (-40°F to
to 158°F)
158°F)
Ambient humidity
Operating: 35% to 85%
IP65
Degree of protection
Electric shock protection Class II
class
Degree of contamination 3 (IEC947-5-1)
Note: 1. With no icing or condensation.
2. Malfunction within 1 ms.
29
Common To All Assemblies
Common To All Assemblies
J OPERATING CHARACTERISTICS (FOR SPST-NO/SPST-NC)
Pushbutton
switches
Emergency stop Knob-type selector switch
switches
Key-type selector switch
Item
Illuminated
Non-illuminated
Pushbutton
Switches
Push-lock
turn-reset
system
Manual release
Automatic
release
Manual release
Automatic
release
A22-F, A22-G,
A22-C, A22-S,
A22-T, A22-H,
A22-D, A22-M,
A22L-T, A22L-H,
A22L-D, A22L-G,
A22L-C
A22E
A22S, A22W
A22S, A22W
A22K
Total travel force 29.4 N {3.0 kgf}
(TTF) max.
44.1 N {4.5 kgf}
0.34 N S m
{3.5 kgf S cm}
(See note)
0.34 N {3.5 gf}
(See note)
0.25 N S m
0.25 N S m
{2.5 kgf S cm} for
two position
(See note)
{2.5 kgf S cm} for
three position
(See note)
0.34 N S m
{3.5 kgf S cm} for
three position
0.34 N S m
{3.5 kgf S cm} for
three position
Total travel
(TT)
Releasing force
(RF) min.
5.5 mm max.
—
10±1 mm
Approx. 90° for two position
Approx. 90° for two position
(Approx. 45° for three position)
0.25 N S m max.
{2.5 kgf S cm}
(See note)
0.34 N S m max.
{3.5 kgf S cm}
(See note)
—
0.34 N S m max.
{3.5 kgf S cm}
(See note)
—
Note: Rotation torque for Emergency Stop Pushbutton, Knob-type Selector, and Key-type Selector Switches.
Accessories (Order Separately)
Item
Contact Blocks
Appearance
Classification
SPST-NO
Remarks
Part number
A22-10
Provided as standard. Order
Contact Blocks only when
adding or replacing them.
General-pur-
pose load
Microload
General-pur-
pose load
A22-10S
A22-01
SPST-NC
Microload
General-pur-
pose load
A22-01S
A22-20
DPST-NO
DPST-NC
Direct lighting
Microload
General-pur-
pose load
A22-20S
A22-02
Microload
A22-02S
A22-TN
A22-T1
Lamp Sockets
Used when changing the light-
ing method.
Transformer
illumination
110 VAC
220 VAC
A22-T2
Mounting Latches
For momentary models
Provided as standard. Order
Mounting Latches only when
mounting Contact Blocks or
Lamp Sockets that are pur-
chased individually.
A22-3200
Legend
plate
frames
Standard
With Snap-in
Legend Plate
(Without text)
Snap-in Legend Plate is acrylic.
White
Red
Black
A22Z-3321
A22Z-3322
A22Z-3323
A22Z-3320
A22Z-3331
A22Z-3332
A22Z-3333
A22Z-3330
size
Without Snap-in Legend Plate
Large
size
With Snap-in
Legend Plate
(Without text)
White
Red
Black
Without Snap-in Legend Plate
(This table continues on the next page.)
30
Common To All Assemblies
Common To All Assemblies
(continued from previous page)
Item
Appearance
Classification
Round
Remarks
Part number
Lock fitting
The body is equipped with a
Lock Fitting. This Lock Fitting is
used when a more secure lock
feature is required.
A22Z-3360
Metallic bezel rings
Sealing caps
Replace with the standard
model.
For flush or projection models
For full-guard models
A22Z-3580
A22Z-3582
Material: nickel-plated zinc
Used to prevent dust or water
from entering the Operational
Unit.
Color: opaque
Material: silicon
For flush models
A22Z-3600F
A22Z-3600T
A22Z-3600G
For extended models
For full-guard models
Color lenses
Used for changing the Opera-
tional Unit color of the Pushbut-
ton Switch.
Red
Green
Yellow
White
A22Z-30TR
A22Z-30TG
A22Z-30TY
A22Z-30TW
A22Z-30TA
Blue
Three-throw spacers
For Pushbutton Switches
Used when mounting three Non- A22Z-3003
Illuminated Switch Units.
Cannot be used with Illuminated
Emergency Stop Switches.
Hole plug
Round
Can be plugged into pre-cut
panel holes for future expan-
sion. The color is black.
A22Z-3550
A22Z-R25
25 mm-dia. ring
25 mm ring
Can be fit into a 25 mm-dia.
hole in the panel. Since this is
not attached to the main body,
order separately.
Snap-in
legend
plates
Standard
size
Without text
Attached to the Standard-size
Legend Plate Frame.
Black
Red
White
Transparent
f
A22Z-3443B
A22Z-3443R
A22Z-3443W
A22Z-3443C
A22Z-3443R-2
Material: Acrylic
White text on
red back-
ground
STOP
A22Z-3443R-4
White text on
black back-
ground
|
A22Z-3443B-1
A22Z-3443B-3
A22Z-3443B-5
A22Z-3443B-6
A22Z-3443B-7
A22Z-3443B-8
A22Z-3443B-9
A22Z-3443B-10
A22Z-3453B
START
ON
OFF
UP
DOWN
POWER ON
OFF-ON
Black
Red
White
Transparent
Large
size
Without text
Attached to the Large-size Leg-
end Plate Frame
A22Z-3453R
A22Z-3453W
A22Z-3453C
Material: Acrylic
For
“EMERGENCY STOP” is
engraved on the plate. Used as
an Emergency Stop Switch
Legend Plate.
60-dia. round plate with black
letters on a yellow back-
ground
A22Z-3466-1
Emer-
gency
Stop
90-dia. round plate with black
letters on a yellow back-
ground
A22Z-3476-1
Switch
(This table continues on the next page.)
31
Common To All Assemblies
Common To All Assemblies
(continued from previous page)
Item
Appearance
Classification
Remarks
Part number
Character films
After printing on a film, affix to
the indicator plate of the Illumi-
nated Pushbutton Switch. (The
back is coated with adhesive.)
No print (Round)
A22Z-3460
Character
print (Round)
|
f
A22Z-3460-1
A22Z-3460-2
A22Z-3460-3
A22Z-3460-4
A22Z-3480
START
STOP
No print (Square)
—
Lamp extractor
Rubber tool used to easily
replace Lamps.
A22Z-3901
Tightening wrench
Lens tightening tool
—
—
Tool used to tighten nuts from
the back of the panel.
A22Z-3905
A22Z-3908
Used for replacing the cap of
the Half-guard Pushbutton
Switch.
Lens puller
—
Used for removing the lens
from the indicator of the
Square Illuminated Pushbutton
Switch.
A3PJ-5080
J ENCLOSURES
Material
Hole size
Number of holes
Part number
Polyester
22.5 mm (0.88 in)
1
2
3
1
2
3
4
6
A22N-PENC-1
A22N-PENC-2
A22N-PENC-3
A22N-MENC-1
A22N-MENC-2
A22N-MENC-3
A22N-MENC-4
A22N-MENC-6
A22N-MENC-9
A22N-MENC-12
A22N-MENC-16
Metallic
22.5 mm (0.88 in)
9
12
16
Note: For more information on pushbutton enclosures refer to drawings in the Dimensions section.
32
Common To All Assemblies
Common To All Assemblies
J NAMEPLATE NOMENCLATURE
1
2
3
A22N-jjj
Note: To complete the part number of the stan-
dard nameplates, select the plate type and
add the number from the table below.
Example: Plastic Square Nameplate en-
graved “Reset” A22N-PS38
Code Material
Code Shape
P
Plastic
Metal
X
R
S
Shield
M
Rectangular
Square
A22N-PRj
A22N-PSj
A22N-PXj
A22N-MRj
A22N-PE
1
AUTO
30
ON
106
HIGH-LOW
150
AUTO-MAN-
175
START-JOG-STOP
OFF
2
CLOSE
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
OPEN
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
INCH-REVERSE
JOG-FOR
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
AUTO-OFF-HAND
AUTO-OFF-MAN
CLOSE-OFF-OPEN
DOWN-OFF-SLOW
FAST-OFF-SLOW
FOR-OFF-REV
FOR-STOP-REV
HIGH-LOW-OFF
HIGH-OFF-LOW
JOG-SAFE-RUN
JOG-STOP-RUN
LEFT-OFF-RIGHT
LOC-OFF-REMOTE
LOW-OFF-HIGH
176
177
178
179
180
181
182
183
184
185
186
187
188
190
191
START-RUN-STOP
UP-OFF-DOWN
1-OFF-2
3
CYCLE START
CYCLE STOP
DECREASE
DOWN
OUT
4
POWER ON
PULL TO START
PUSH TO TEST
PUSH TO STOP
RAISE
JOG-REV
5
JOG-RUN
HAND-OFF-AUTO
6
LEFT-RUN
LOWER-RAISE
MAN-AUTO
OFF-ON
7
EMERG.STOP (red)
FAST
8
9
FAULT
RESET
10
11
12
13
14
15
16
FEED
REVERSE
RIGHT
ON-OFF
FEED START
FEED STOP
FLUID LEVEL LOW
FORWARD
FULL SPEED
HAND
OPEN-CLOSE
RAISE-LOWER
REV-FOR
RUN
SLOW
I-II-III
SPEED
RUN-INCH
RUN-JOG
III
START
60 MM E-STOP
90 MM E-STOP
STOP
RUN-SAFE
LOWER-
OFF-RAISE
17
18
HIGH
IN
46
47
TEST
UP
122
123
SAFE-RUN
166
167
OFF COOLANT ON
OFF-LOC-REMOTE
200
BLANK
NAMEPLATE
SLOW-FAST
200E
SPECIAL
ENGRAVING
19
20
21
22
23
INCH
48
49
50
51
100
1ST SPEED
2ND SPEED
3RD SPEED
4TH SPEED
AUTO-MAN
124
125
126
127
128
START-JOG
168
169
170
171
172
OFF-MAN-AUTO
OFF-SLOW-FAST
OFF-1-2
INCREASE
JOG
START-STOP
STOP-START
SUMMER-WINTER
UP-DOWN
JOG FORWARD
LEFT
OPEN-OFF-CLOSE
RAISE-OFF-
LOWER
24
25
26
27
28
29
LOW
101
102
103
104
105
CLOSE-OPEN
DOWN-UP
173
174
SLOW-OFF-FAST
SLOW-OFF-START
LOW SPEED
LOWER
FAST-SLOW
FOR-REV
MOTOR RUN
MOTOR STOP
OFF
HAND-AUTO
Note: All plastic name plates are adhesive backed, contain beveled edges and are supplied standard with white lettering on black back-
ground. Any deviation from items listed here will be a special order. Contact Omron.
33
Common To All Assemblies
Common To All Assemblies
Dimensions
Unit: mm (inch)
J LEGEND PLATE FRAMES
27
(1.06)
A22Z-332j
27
(1.06)
40.8
(1.61)
50.8
(2.00)
20.5
(1.81)
20.5
(1.81)
28 dia.
28 dia.
22.2 dia.
29.8
(1.17)
22.2 dia.
29.8
(1.17)
J PLASTIC RECTANGULAR AND SHIELD
A22N-PRj
A22N-PXj
29.8 (1.17)
6.4 (0.25)
11.4 (0.45)
29.9 (1.18)
44.8 (1.76)
φ22.3 (0.88)
Note: Curved dashed line denotes difference between Rectangular and Rectangular to Round name plates.
J PLASTIC SQUARE
A22N-PSj
44.8 (1.76)
6.4 (0.25)
11.4 (0.45)
29.9 (1.18)
44.8 (1.76)
φ22.3 (0.88)
34
Common To All Assemblies
Common To All Assemblies
J METAL RECTANGULAR
A22N-MRj
29.8 (1.17)
6.4 (0.25)
11.4 (0.45)
29.9 (1.18)
44.8 (1.76)
φ22.4 (φ0.88)
2 x 25.0 (0.98)
4 x 3.2 (0.13)
J 60MM EMERGENCY STOP
A22PE190
φ60.0 (φ2.36)
White
Letters
Red
φ22.3 (φ0.88)
J 90MM EMERGENCY STOP
A22N-PE191
φ90.0 (φ3.54)
White
Letters
Red
φ22.3 (φ0.88)
35
Common To All Assemblies
Common To All Assemblies
J LOCK FITTING
J 25 MM-DIA. RING
A22Z-3360
A22Z-R25
22.2 dia.
20.5
(0.81)
30 dia,
(1.18)
2.8
(0.11)
6
J COLOR LENS
J HOLE PLUG (ROUND)
(0.24)
A22L-30Tj
A22Z-3530
10.2
(0.40)
30 dia.
13
(0.51)
2.5
J SEALING CAPS
For Flush Models
A22Z-3600F
For Extended Head Models
A22Z-3600T
32 dia.
26 dia.
(1.02)
32 dia.
16.6
(0.65)
23
(0.91)
22.2 dia.
33 dia.
(1.30)
22.2 dia.
33 dia.
(1.30)
For Full-guard Models
A22Z-3600G
24
(0.94)
(1.28)
36
Common To All Assemblies
Common To All Assemblies
J THREE-THROW SPACER
13.7 dia.
A22Z-3003
10.8
(0.43)
11
(0.43)
3.4
(0.13)
For Flush/Extended Models
For Full-guard Models
287 i
24 dia.
A22Z-3580
28.7 dia.
11.5
(0.45)
18.5
(0.73)
29.7dia.
(1.17)
J SNAP-IN LEGEND PLATES
For General-purpose Models
A22L-3443j-j
For Large Models
A22Z-3453j
26.8
(1.06)
26.8
(1.06)
8.2
(0.32)
17.9
(0.70)
J CHARACTER FILM
For Round Models
For Square Models
A22Z-3480
17
(0.67)
A22Z-3460-j
1.2
1.2
17
(0.67)
19.4 dia.
(0.76)
21.5 x 21.5
(0.85 x 0.85)
37
Common To All Assemblies
Common To All Assemblies
Unit: mm (inch)
J LAMP EXTRACTOR
55
(2.17)
A22Z-3901
11 dia.
(0.43)
8 dia.
(0.31)
8.5 dia.
J TIGHTENING WRENCH
A22Z-3905
30 dia.
(1.18)
90
(3.54)
J LENS TIGHTENING TOOL
A22Z-3908
5 dia.
23.4
(0.92)
20.5
(0.81)
30
(1.18)
J LENS PULLER
A3PJ-5080
20
(0.79)
15
(0.59)
10 (0.39)
50
(1.97)
25
(0.98)
38
Common To All Assemblies
Common To All Assemblies
J ENCLOSURES (POLYESTER)
A22N-PENC-j
Section Y-Y
Top View with
Cover Removed
Section Z-Z
22.5mm Hole
3.37
(0.13)
2.25
(0.09)
1.97
(0.08)
Hole Placement
Overall Dimensions Inside Dimensions
No. of
Holes
Hole
Size
Part No.
A
B
C
D
E
F
J
K
L
M
6.74
6.74
8.99
3.93
3.93
3.93
3.88
3.88
3.88
6.01
6.01
8.26
3.26
3.26
3.26
3.63
3.63
3.63
5.99
5.99
8.24
3.18
3.18
3.18
4.88
4.88
7.13
2.94
2.94
2.94
1
2
3
22.5
22.5
22.5
A22N-PENC-1
A22N-PENC-2
A22N-PENC-3
39
Common To All Assemblies
Common To All Assemblies
J ENCLOSURES (METALLIC)
A22N-MENC-j
D
F
0.56
0.25 Dia
4 Places Typ.
0.25 Dia
4 Places Typ.
0.88
0.25
TYP
0.69
0.25
TYP
1.88 TYP
(0.07)
1.50 TYP
(0.06)
E
L
Z G
A
0.88
1.38
B
W
C
Body Type MENC-6 through
MENC-16 (hinged)
Side View
Body Type MENC-1 MENC-2,
MENC-3 and MENC-4 (not hinged)
0.25
0.13
0.88
Dia.
0.38
0.88
0.48
0.88
Typical Pushbutton Detail
Hinge Detail
Retractable pin allows door to
be mounted on left or right side
Overall Dimensions
Ship
Part No.
No. of
Holes
A
B
C
D
E
F
G
L
W
Z
Wt. lbs.
1
3.25
5.13
7.00
8.88
8.50
8.50
10.38
10.38
2.75
2.75
2.75
2.75
5.00
6.50
6.50
8.00
3.50
3.50
3.50
3.50
4.25
4.25
4.25
4.25
1.88
1.88
1.88
1.88
4.13
5.63
5.63
7.13
3.75
5.63
7.50
9.38
9.00
9.00
10.88
10.88
1.71
1.71
1.71
1.71
3.96
5.46
5.46
6.96
2.50
4.38
6.25
8.13
7.75
7.75
9.36
9.63
4.25
6.13
8.00
9.88
9.50
9.50
11.38
11.38
3.06
3.06
3.06
3.06
5.31
6.81
6.81
8.31
3.56
5.44
7.31
9.19
8.81
8.81
10.69
10.69
2
A22N-MENC-1
A22N-MENC-2
A22N-MENC-3
A22N-MENC-4
A22N-MENC-6
A22N-MENC-9
A22N-MENC-12
A22N-MENC-16
2
3
3
3
4
5
6
6
7
4
6
9
12
16
40
Common To All Assemblies
Common To All Assemblies
Installation
J MOUNTING THE PANEL
Panel Hole Dimensions
J MOUNTING THE OPERATIONAL UNIT
ON THE PANEL
Insert the Operational Unit from the front surface of the panel,
insert the Lock Fitting and the mounting nut from the terminal
side, then tighten the nut. Before tightening, check that the rubber
washer is present between the Operational Unit and the panel.
3.2
25 dia.
(0.98)
22 dia.
(0.87)
(0.13)
24.1
(0.95)
When using a Legend Plate Frame, put one rubber washer each
between the Legend Plate Frame and the panel and between the
Operational Unit and the Legend Plate Frame. (One rubber
washer will be provided when one Legend Plate Frame is
ordered.)
22.3
(0.88)
22.3
(0.88)
25
(0.98)
Align the Lock Fitting with the groove in the casing, then insert
the Lock Fitting so that its edge is located on the panel side.
For 25 mm-dia. holes, always use 25 mm-dia. Rings. (Since the
cutout dimensions are large, IP65 cannot be guaranteed unless
25-dia. Rings are used.)
Tighten the mounting nut at a torque of 0.98 to 1.96 N • m {10 to
20 kgf • cm}.
When using a Lock Ring, replace with the supplied Lock Fitting,
insert the projecting part into the lock slot, and then tighten the
mounting nut.
If outer surface treatment such as paint is applied to the panel,
the panel dimensions after outer surface treatment must meet the
specified panel dimensions.
Rubber washer
Panel
J MATRIX INSTALLATION
Mounting nut
Proj-
ecting
part
1. The following panel hole dimensions apply when Switch Units
and the Standard-size Legend Plate Frame Lock Fitting are
mounted.
A22Z
A22N-PR, -MR, -PX
30
(1.18)
30
(1.18)
ing
Lock
Fitting
Panel
45
(1.77)
41
(1.61)
When the panel cutout dimension is 25 mm dia., remove the
supplied rubber washer and mount the 25 mm-dia. Ring as
shown below. (Since the A22Z-R25 is not attached to the main
body, order separately.)
Operational Unit
2. The following panel hole dimensions apply when the
Large-size Legend Plate Frame is mounted.
22.3 dia.
A22N-S
A22Z
25-dia. Ring
(A22Z-R25)
30
(1.18)
45
22.3 dia.
25 dia.
25 dia.
Panel
45
(1.77)
41
(1.61)
22.3 dia.
Lock Fitting
Mounting nut
Locking should be applied toward the Engraving Plate.
Note: The above dimensions are the smallest-possible mounting
dimensions. However, these dimensions do not apply to
large Pushbutton Switches. For large Pushbutton
Switches, determine the distance between holes, taking
the Operational Unit and Legend Plate Frame into
account.
41
Common To All Assemblies
Common To All Assemblies
Half-guard Indicators
Put the tips of the Lens Tightening Tool (A22Z-3908) into the
Color Lens slot and turn the Tool.
J MOUNTING THE SWITCH ON THE
OPERATIONAL UNIT
Insert the Operational Unit into the Switch Unit, aligning the arrow
mark inscribed on the Operational Unit with the lever on the
Switch Unit, then move the lever in the direction indicated by the
arrow in the following figure.
Operational Unit
J ASSEMBLING THE CAP
Lighted Pushbutton Switch
Arrow mark
Lever
Mount the Color Lens so that the protrusions inside the cap fit
into the grooves in the Operational Unit.
Grooves
Protrusion inside cap
Cap
J REMOVING THE SWITCH
Move the lever in the direction indicated by the arrow in the
following figure, then pull the Operational Unit or the Switch Unit.
Color Lens
Since the lever has a hole with an inside diameter of 6.5 mm, the
lever can be moved in the specified direction by inserting a
screwdriver into the hole and then moving the screwdriver.
Indicator
Mount the Color Lens so that the protrusions inside the
Operational Unit fit into the grooves in the cap.
Screwdriver
Protrusion
Cap
Grooves in the cap
Color Lens
J MOUNTING/REPLACING THE COLOR
LENS
Projection, Full-guard
Grip and rotate the Color Lens with your fingers.
42
Common To All Assemblies
Common To All Assemblies
Square Pushbutton/Indicator
Installing/Replacing on the Switch Unit
Grip the indicator with your fingers, then rotate the indicator while
pressing it against the Switch Unit.
Removing the Color Lens:
Insert the protruding tip of the Lens Puller (A3PJ-5080) into the lens
slot, hold the plate spring, and pull them to remove the Color Lens.
Plate spring
Mounting the Color Lens:
Mount the Color Lens on the flange and firmly push the Color
Lens. When the Color Lens is inserted, check whether it operates
properly. When replacing the Lamp, remove the Color Lens and
diffusion plate with fingers or Lens Puller.
Attach the Character Film properly so that it fits inside the
protruding part of the diffusion plate. Then, match the diffusion
plate to the square flange and insert the Lens.
J CONTROL BOX (ENCLOSURE)
Mounting the Switch
The Standard-size Legend Plate Frame can be mounted. Mount
the Frame as shown in the following diagram. Mount the Switch
in the same way as for an ordinary panel.
Flange
Snap-in Legend Plate
Diffusion plate
Character Film
Color Lens
J EMERGENCY STOP SWITCH
Insert the protrusion of the Tightening Wrench (A22Z-3905) into
the Cap slot and then turn to remove the Cap.
J INSTALLING/REMOVING THE SWITCH
UNIT
Installing the Switch Unit
Hook the small protrusion on the Switch Unit into the groove on the
other side of the lever, then push up the Switch Unit in the direction
indicated by the arrow in the figure below.
ever
Mounting
Latch
J INSTALLING/REPLACING THE LAMP
Installing from the Panel Surface
Insert the Lamp Extractor (A22Z-3901) into the lamp, then rotate the
Extractor while pressing it.
sion
Switch Unit
43
Common To All Assemblies
J ENGRAVING
Engrave the characters on the surface on the Cap. Make sure
that the characters are aligned parallel to the imaginary line
connecting the two protruding portions to the left and right of the
Cap.
Common To All Assemblies
Removing the Switch Unit
Insert a screwdriver between the Mounting Latch and the Switch
Unit, then push down the screwdriver in the direction indicated by
the arrow in the following figure.
Use either of the following screwdrivers.
The characters must not be engraved deeper than 0.5 mm. Apply
an alcohol-based paint coating, such as melamine, alkyd, or
acrylic resin paint coating, to the engraved characters.
Protruding portions on Cap
J AFFIXING CHARACTER FILM
r
Hold the Cap, remove the cardboard on the Film, and attach the Film
to the Cap. Make sure that the protruding portions of the Cap en-
gage the cutout portions of the Film and that the characters are
aligned parallel to the imaginary line connecting the two protruding
portions to the left and right of the Cap.
J WIRING
Wiring Round Crimp Terminals
ve the cardboard.
Loosen the terminal screw from the Switch Unit until it completely
comes off the groove, insert a screwdriver as shown in the following
figure, then push up the washer in the direction indicated by the
arrow to temporarily secure it. Now, a round crimp terminal can be
connected. After inserting the terminal, tighten the screws to com-
plete wiring.
J MOUNTING AND DISMOUNTING
Washer
SNAP-IN LEGEND
Press and secure the Snap-in Legend Plate onto the Legend
Plate Frame.
The direction of the characters will vary with the mounting
direction of the control panel if the Switch is a knob or key
selector model.
Screw
Screwdriver
Legend Plate Frame
Snap-in Legend Plate
Concave surface
44
Common To All Assemblies
J ENGRAVING METHOD
Material: Acrylic
Engrave the characters directly on the matted side of the Snap-in
Legend Plate.
Common To All Assemblies
To easily remove the Snap-in Legend Plate from the Legend
Plate Frame mounted to the panel, insert a Tool with a thin tip
into the space between the Snap-in Legend Plate and the
Legend Plate Frame.
The characters must be engraved no deeper than 0.5 mm.
Apply alcohol-based paint coating to the engraved characters.
If the Snap-in Legend Plate is transparent, engrave the
mirror-written characters on the back of the Snap-in Legend Plate
and apply paint coating to the characters. Then apply paint
coating of a different color to the remaining part of the Snap-in
Legend Plate.
J MOUNTING THREE-THROW SPACER
Press and secure the two protruding portions of the Three-throw
Spacer to the two indented portions of the inner side of the
control panel.
The Snap-in Legend Plate is easily removed by pressing the
Snap-in Legend Plate from the back of the Legend Plate Frame.
The Legend Plate Frame is made of acrylic resin, which is easily
damaged by shock. Be sure to handle the Legend Plate Frame
with care.
Precautions
!
Wiring
WARNING
After wiring the Switch, maintain an appropriate clearance and
creepage distance.
Do not apply a voltage between the incandescent lamp and
the terminal that is greater than the rated voltage. If the incan-
descent lamp is broken, the Operational Units may pop out.
When DC-specific LEDs are used, wire the Switch so that the X1
terminal is positive.
Always turn OFF the power and wait for 10 minutes before
replacing the incandescent lamp. If the lamp is replaced
immediately after the power is turned OFF, the remaining heat
may cause burns.
Terminal screws must be Phillips or slotted M3.5 screws with a
square washer.
The tightening torque is 1.08 to 1.27 N • m {11 to 13 kgf • cm}.
J CORRECT USE
Mounting
Always make sure that the power is turned OFF before mounting,
removing, or wiring the Switch, or performing maintenance.
Single wires, stranded wires, and crimp terminals can be
connected to the Switch.
Operating Environment
The IP65 model is designed with a protective structure so that it
will not sustain damage if it is subjected to water from any
direction to the front of the panel.
Do not tighten the mounting ring more than necessary using tools
such as pointed-nose pliers. Doing so will damage the mounting ring.
The tightening torque is 0.98 to 1.96 N • m {10 to 20 kgf • cm}.
The panel thickness is 1 to 5 mm.
45
Common To All Assemblies
Common To All Assemblies
Using the Microload
Others
Insert a contact protection circuit, if necessary, to prevent the
reduction of life expectancy due to extreme wear on the contacts
caused by loads where inrush current occurs when the contact is
opened and closed.
The oil-resistant IP65 uses NBR rubber and is resistant to
general cutting oil and cooling oil. Some particular oils cannot be
used with the oil-resistant IP65, however, so contact your
OMRON representative for details.
The minimum applicable load is the N-level reference value. This
value indicates the malfunction reference level for the reliability
level of 60% (λ 60) (conforming to JIS C5003).
If the panel is to be finished with coating, etc., make sure that the
panel meets the specified dimensions after the coating.
Do not subject the Switch to extreme shock or vibration. Doing so
will cause malfunctions and damage to the Switch.
-- 4
The equation, λ 60 = 0.5 x 10 /time indicates that the estimated
malfunction rate is less than 1/2,000,000 with a reliability level of
60%.
Do not let sharp objects come into contact with the Switches that are
made of resin. Doing so will damage the Switches, causing
scratches on the outside of the Operational Units, and malfunction.
When handling the Switches, do not throw or drop them.
Area of use
General-purpose load area
Microload area
Do not allow the Switch
to drop and hit the
ground.
Invalid
area
Current (mA)
LEDs
The LED current-limiting resistor is built-in, so internal resistance
is not required.
If commercially available LEDs are used, select the ones that
meet the following conditions:
Do not place or drop
heavy objects on the
Switch.
Base: BA9S/13j
Overall length: 26 mm max.
Power consumption: 2.6 W max.
Do not operate the Switch
with hard or sharp objects.
Hammer
Screwdriver
46
Custom Engraved Nameplate Order Form – A22N Series
Copy this form and utilize it to specify Custom Engraved Nameplates. Once completed:
Mail the completed form to: Omron LLC, One Commerce Drive, Schaumburg, Il. 60173-5302
Or fax to either Omron LLC at: 847.843.8261 or your local field sales office.
Bill to:
Date:___________________________
Your Name:______________________
Address:__________________________________________
City/State/Zip:______________________________________ P.O.#___________________________
Attention:__________________________________________ Phone:__________________________
Ship to:
Fax:____________________________
Address:___________________________________________
City/State/Zip:_______________________________________
Attention:___________________________________________ Phone:__________________________
Step 1)
Step 2)
Step 3)
Select blank legend plate from the four depicted below (either A, B, C, or D).
Write your choice in the small box under Legend Type and fill in the box marked Quantity.
Print text as it should appear on the finished nameplate.
Plastic Shield Shape
Plastic Rectangular
Plastic Square
Metal Rectangular
A
B
C
D
A22N--PX200E
A22N--PR200E
A22N--PS200E
A22N--MR200E
11 Characters per Line Maximum, 2 Lines Maximum,
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
47
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Legend Quantity
Type
Legend Quantity
Type
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
YourSignature_______________________________________________________Date______________________
48
Common To All Assemblies
Common To All Assemblies
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron247.com -- under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
R
OMRON ELECTRONICS LLC
MEXICO SALES OFFICES
OMRON ON-LINE
Global --
1 Commerce Drive
Mexico, D.F.
555.660.3144
656.623.7083
Schaumburg, IL 60173
Tel: 847.843.7900
For U.S. technical support or other
inquiries: 800.556.6766
Ciudad Juárez
www.omron247.com
Monterrey, N.L. 818.377.4281
USA --
www.omron247.com
Querétaro
442.135.4510
BRAZIL SALES OFFICE
Canada --
www.omron.ca
Sao Paulo
55.11.2101.6310
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
Tel: 416.286.6465
ARGENTINA SALES OFFICE
Brazil --
www.omron.com.br
Cono Sur
54.114.787.1129
CHILE SALES OFFICE
Latin America --
mela@omron.com
Santiago
562.206.4592
OTHER LATIN AMERICAN SALES
mela@omron.com
Cat. No. A108-E3-02
03/07
Specifications subject to change without notice.
Printed in U.S.A.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明