A3G-4021 [OMRON]
Lighted and non-lighted/convex versions;
| 型号： | A3G-4021 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Lighted and non-lighted/convex versions |
| 文件： | 总18页 (文件大小：296K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Lighted Pushbutton Switch
A3G
Control Units
Assembled Lighted Pushbutton Switches
and Separate-Unit Type 16-mm
Cylindrical Series
■ Lighted and non-lighted/convex versions
■ Pushbutton/Indicator Types available
■ Oil-resistant: complies with IP65 seal requirements
■ Accommodates panel thicknesses of .5 to 5 mm
■ Available with screw/#110 tab solder terminals
■ Snap-in, snap-out switch units simplify wiring
V
D
E
and maintenance
Ordering Information
■ ASSEMBLED TYPES
Lighted
Part Number
Operator
Circuit
Color
Red
Round
Rectangular
Square
Pushbutton
Momentary
A3GT-99C1-H1ND
A3GT-99C1-H1NG
A3GT-99C1-H1NW
A3GT-99D1-H1ND
A3GT-99D1-H1NG
A3GT-99D1-H1NW
M2GT-99A1-H1ND
M2GT-99A1-H1NG
M2GT-99A1-H1NW
A3GJ-99C1-H1ND
A3GJ-99C1-H1NG
A3GJ-99C1-H1NW
A3GJ-99D1-H1ND
A3GJ-99D1-H1NG
A3GJ-99D1-H1NW
M2GJ-99A1-H1ND
M2GJ-99A1-H1NG
M2GJ-99A1-H1NW
A3GA-99C1-H1ND
A3GA-99C1-H1NG
Green
White
Red
A3GA-99C1-H1NW
A3GA-99D1-H1ND
A3GA-99D1-H1NG
A3GA-99D1-H1NW
M2GA-99A1-H1ND
M2GA-99A1-H1NG
M2GA-99A1-H1NW
Maintained
Green
White
Red
Indicator
Green
White
Note: Above switches offer double pole, double throw NO/NC contacts with screw terminals; lighted type pushbuttons offer neon
lamps at 110 VAC; and all are fully assembled.
A3G
A3G
■ ASSEMBLED TYPES continued
Non-lighted/Convex
Part Number
Round
Operator
Circuit
Color
Red
Rectangular
Square
Pushbutton
Momentary
A3GT-99C0-R
A3GT-99C0-Y
A3GT-99C0-G
A3GT-99C0-B
A3GT-99D0-R
A3GT-99D0-Y
A3GT-99D0-G
A3GT-99D0-B
A3GT-99C2-R
A3GT-99D2-R
A3GJ-99C0-R
A3GJ-99C0-Y
A3GJ-99C0-G
A3GJ-99C0-B
A3GJ-99D0-R
A3GJ-99D0-Y
A3GJ-99D0-G
A3GJ-99D0-B
A3GJ-99C2-R
A3GJ-99D2-R
A3GA-99C0-R
A3GA-99C0-Y
A3GA-99C0-G
A3GA-99C0-B
A3GA-99D0-R
A3GA-99D0-Y
A3GA-99D0-G
A3GA-99D0-B
A3GA-99C2-R
A3GA-99D2-R
Yellow
Green
Black
Red
Maintained
Yellow
Green
Black
Red
Mushroom Cap
Momentary
Maintained
Red
Note: Above switches offer double pole, double throw NO/NC contacts with screw terminals; lighted type pushbuttons offer neon
lamps at 110 VAC; and all are fully assembled.
Press
■ SEPARATE TYPE PUSHBUTTON UNITS
Structure of pushbutton
Lighted Switches
Press
Align white marks
e
Snap-in switch unit greatly improves
wiring efficiency. Simply insert the
switch unit for complete connection.
ate
Round
Rectangular
Square
lunger
Press the part indicated PUSH on the
switch unit and pull to remove.
Note: The legend plate and reflective
plunger are bonded together on
the IP65 Oil-resistant type only.
Align white marks to insert.
Degree
Part Number
Switch Type
LED
of Sealing
Dust Proof
IP40
Color
Round
Rectangular
Square
Red
A3BT-500R
A3BT-500Y
A3BT-500GY
A3BT-500W
A3BT-510R
A3BT-510Y
A3BT-510GY
A3BT-510W
A3BT-500G
A3BT-500A
A3BT-510G
A3BT-510A
A3GT-500D
A3GT-500GN
A3GT-500WN
A3GT-510D
A3GT-510GN
A3GT-510WN
A3BJ-500R
A3BJ-500Y
A3BA-500R
A3BA-500Y
Yellow
Green*
White
Red
A3BJ-500GY
A3BJ-500W
A3BJ-510R
A3BJ-510Y
A3BJ-510GY
A3BJ-510W
A3BJ-500G
A3BJ-500A
A3BJ-510G
A3BJ-510A
A3GJ-500D
A3GJ-500GN
A3GJ-500WN
A3GJ-510D
A3GJ-510GN
A3GJ-510WN
A3BA-500GY
A3BA-500W
A3BA-510R
A3BA-510Y
A3BA-510GY
A3BA-510W
A3BA-500G
A3BA-500A
A3BA-510G
A3BA-510A
A3GA-500D
A3GA-500GN
A3GA-500WN
A3GA-510D
A3GA-510GN
A3GA-510WN
Oil-resistant
IP65
Yellow
Green*
White
Green*
Blue
Incandescent Lamps
Neon Lamps
IP40
Oil-tight IP65
Green*
Blue
Dust Proof
IP40
Orange
Green
White
Orange
Green
White
Oil-resistant
IP65
Note: 1. Pushbutton units, lamps (lighted type only), case, and socket must be ordered separately.
Example: Pushbutton unit A3BJ-500R, Case A3GJ-6011-1, Socket A3G-4011.
2. Illumination: red, yellow, and white use either LED or incandescent lamps.
3. With the exception of green, all pushbutton units can be used with either LED or incandescent lamps. To avoid an
undesirable hue change with green pushbutton units, use a green LED lamp with a green LED pushbutton and an
incandescent lamp with a green incandescent pushbutton.
2
A3G
A3G
Round
Rectangular
Square
Non-lighted/Convex Switches
Degree
Part Number
Round
Switch Type
Convex
of Sealing
Dust Proof
IP40
Color
Red
Rectangular
A3BJ-502R
A3BJ-502Y
A3BJ-502G
A3BJ-502W
A3BJ-502A
A3BJ-502B
A3BJ-512R
A3BJ-512Y
A3BJ-512G
A3BJ-512W
A3BJ-512A
A3BJ-512B
LED
Square
A3BT-502R
A3BT-502Y
A3BT-502G
A3BT-502W
A3BT-502A
A3BT-502B
A3BT-512R
A3BT-512Y
A3BT-512G
A3BT-512W
A3BT-512A
A3BT-512B
A3BA-502R
Yellow
Green
White
Blue
A3BA-502Y
A3BA-502G
A3BA-502W
A3BA-502A
A3BA-502B
A3BA-512R
A3BA-512Y
A3BA-512G
A3BA-512W
A3BA-512A
A3BA-512B
Black
Red
Oil-resistant
IP65
Yellow
Green
White
Blue
Black
Incandescent
Neon
Lamps
Part Number
5 VDC
Type
Color
Red
12 VDC
24 VDC
LED Light
A3B-005R
A3B-005Y
A3B-005G
A3B-005W
14 V
A3B-012R
A3B-012Y
A3B-012G
A3B-012W
28 V
A3B-024R
A3B-024Y
A3B-024G
A3B-024W
Yellow
Green
White
Incandescent Lamp
Neon Lamp
A3B-014
A3B-028
220 V
Pushbutton Color
White or Orange
Green
Lamp Color 110 V
Orange
Green
A3B-H1ND
A3B-H2ND
A3B-H2NG
A3B-H1NG
Cases
Switch
Action
Part Number
Type
Round
Rectangular
Square
Dust Proof
IP40
Momentary A3GT-6011-1
Alternating A3GT-6021-1
A3GJ-6011-1
A3GJ-6021-1
M2GJ-7001-1
A3GJ-6011-3
A3GJ-6021-3
M2GJ-7001-3
A3GA-6011-1
A3GA-6021-1
M2GA-7001-1
A3GA-6011-3
A3GA-6021-3
M2GA-7001-3
Indicator
M2GT-7001-1
Oil-resistant
IP65
Momentary A3GT-6011-3
Alternating A3GT-6021-3
Indicator
M2GT-7001-3
Sockets
Contact Ratings
Terminal Type
Solder
Part Number
A3G-4011
A3G-4021
A3G-4024
A3G-4111
A3G-4121
A3G-4124
M2G-4901
M2G-4904
General Purpose Loads
SPDT
DPDT
Solder
Screw
Microloads
SPDT
DPDT
Solder
Solder
Screw
Indicator
–
–
Solder
Screw
Note: 1. Pushbutton units, lamps (lighted type only), case, and socket must be ordered separately.
Example: Pushbutton unit A3BJ-500R, Case A3GJ-6011-1, Socket A3G-4011.
2. Illumination: red, yellow, and white use either LED or incandescent lamps.
3
A3G
A3G
Switch Guard
Dust Cover
Spring Mounting Clip
Panel Plug
Screw Fitting
Legend Panel
Extractor
Switch Unit
Accessories
Part Number
Description
Switch Guard
Dust Cover
Remarks
Round
Rectangular
A3BJ-5050
A3BJ-5060
Square
Cannot be used with dust cover.
Cannot be used with switch cover.
A3BT-5050
A3BT-5060
A3B-3001
A3BA-5050
A3BA-5060
Spring Mounting Clip
for snap-in mounting
Cannot be used with mounting nut.
Recommended panel thickness is 0.5 to 3.5 mm
Panel Plug
Can be plugged into pre-cut panel holes for
future expansion.
A3BT-3003
A3BJ-3003
A3BA-3003
Screw Fitting
Extractor
Convenient for ganged installation. Do not overtighten.
Convenient for extracting pushbutton switches.
A3B-3004
A3PJ-5080
Part Number
Round
Description
Remarks
Type
Opacity
Milky
Rectangular
A3BJ-5201
A3BJ-5202
A3BJ-5203
Square
Legend Panel
A single legend panel
(transparent) is included
with standard products.
Dust Proof
IP40
A3BT-5201
A3BA-5201
A3BA-5202
A3BA-5203
Transparent A3BT-5202
Oil-resistant
IP65
–
A3BT-5203
Description
Switch Unit
Remarks
Classification
Terminal Type
Solder
Part Number
A3G-3011
A3G-3111
A3G-3000
Replacement part.
General purpose loads
Microloads
Solder
Dummy
—
4
A3G
A3G
Specifications
■ SEPARATE TYPE
Contact Ratings
Type
AC Resistant Load
250 VAC 3 A
DC Resistant Load
30 VDC 3 A
—
General purpose load
125 VAC 5 A
Microload*
125 VAC 0.1 A
30 VDC 0.1 A
* Minimum applicable load is 1 mA at 5 VDC.
LED Ratings
Rated Voltage
5 VDC
Rated Current
30 mA
Operating Voltage
5 VDC ± 5%
12 VDC
15 mA
12 VDC ± 5%
24 VDC ± 5%
24 VDC
10 mA
Incandescent Lamp Ratings
Rated Voltage
14 V
Rated Current
40 mA
Operating Voltage
12 V
24 V
28 V
24 mA
Neon Lamp Ratings
Rated Voltage
110 VAC
Rated Current
1.5 mA
Operating Voltage
100 VAC ± 10%
200 VAC ± 10%
220 VAC
1.5 mA
Operating Temperature
Operating Humidity
35 to 85% RH
Storage Temperature
-10° to 55° C (with no icing)
-25° to 65° C
Note: All switch models have a built-in current-limiting resistor (for use with LED).
■ ASSEMBLED SWITCHES
Construction Data
Termination
PC board terminals
Mounting style
Packaging method
Nut mounting; snap-in panel mounting (Pushbutton)
Carton
5
A3G
A3G
Characteristic Data
■ ASSEMBLED SWITCHES
Pushbutton unit color
LED - Lighted
Red, Yellow, Green, White
Red, Yellow, Green, White, Blue
Red, Green, White
Incandescent lamp - Lighted
Neon lamp - Lighted
Non-lighted/Convex
Red, Yellow, Green, White, Blue, Black
Black
Switch unit color
Contact form
Pushbutton, Key, Selector
Pushbutton, Key, Selector
SPDT or DPDT
Resistive load
3 A, 250 VAC/5 A, 125 VAC; 3 A, 30 VDC
1,000 x 103 operations min.
200 x 103 operations min.
100 x 103 operations min.
200 x 103 operations min.
Key insertion/removal: 10 x 103 times min
100 x 103 operations min.
200 x 103 operations min.
100 x 103 operations min.
Service life - Pushbutton
Mechanical
Momentary action
Alternating action
Electrical
Service life - Key
Mechanical
Electrical
Mechanical
Electrical
Service life - Selector
Accessories - Pushbutton
Switch guard, dust cover, spring mounting clip, panel plug,
screw fitting, legend plate, extractor
Accessories - Key
Accessories - Selector
Series product
Panel plug, screw fitting
Panel plug, screw fitting
Microload version, socket terminal
Note: Data shown are of initial value.
■ NON-LIGHTED/CONVEX PUSHBUTTON SWITCHES
Allowable operating
frequency
Mechanical
Momentary action
Alternating action
120 operations / min. max.
60 operations / min. max.
20 operations / min. max.
100 M Ω min. (at 500 VDC)
Electrical
Insulation resistance
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between terminals of
same polarity
2,000 VAC, 50/60 Hz for 1 minute between terminals of dif-
ferent polarity and also between each terminal and ground*
Vibration
Shock
Malfunction
Durability
10 to 55 Hz, 1.5 mm double amplitude
Approx. 500 m/s2 (50 G)
Approx. 150 m/s2 (15 G)
2,000,000 operations min.
200,000 operations min.
100,000 operations min.
IP40/IP65 (Oil-resistant)
Malfunction
Mechanical
Service life
Momentary operation
Alternating operation
Electrical
Degree of protection (IEC)
Weight
Approx. 13 g (for lighted type 2-contact switches with solder
terminals)
* With LED and incandescent lamp not mounted.
■ OPERATING CHARACTERISTICS
Non-lighted/Convex Pushbutton Switches
Dust Proof IP40
Oil-resistant IP65
Features
SPDT
DPDT
SPDT
DPDT
Operating force (OF) max.
Releasing force (RF) min.
Total Travel (TT)
250 G
450 G
300 G
500G
30 G
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Approx. 3 mm
2.5 mm
0.5 mm
–
Pretravel (PT) max.
Lock stroke (LTA) min.*
Set position (SP)
* Lock stroke is only for alternating operation.
6
A3G
A3G
Dimensions
Unit: mm (inch)
■ ASSEMBLED SWITCH
Square with screw terminals
Panel cutout
(top view)
Note: The above panel cutout diagram
applies when the X dimension (the
space between terminals of different
polarity) is maintained at 3.5 mm.
When the X dimension is not
required, switches may be mounted at
24.5 mm for the general-purpose
pushbutton type, or at 26 mm for the
rectangular concave type.
■ LIGHTED TYPE PUSHBUTTON SWITCHES
Rectangular (A3GJ)
with solder terminals
Panel cutout
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
panel cutout becomes 16.2 + 3 mm
0
.
0
in diameter.
7
A3G
A3G
Unit: mm (inch)
■ LIGHTED TYPE PUSHBUTTON SWITCHES continued
Rectangular (A3GJ)
Panel cutout
(top view)
Note: The above panel cutout diagram
applies when the X dimension (the
space between terminals of different
polarity) is maintained at 3.5 mm.
When the X dimension is not
required, switches may be mounted at
24.5 mm for the general-purpose
pushbutton type, or at 26 mm for the
rectangular concave type.
Panel cutout
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
0
0
.
panel cutout becomes 16.2 + 3 mm
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
Round (A3GT)
Panel cutout
with solder terminals
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
panel cutout becomes 16.2 + 3 mm
0
0
.
have been omitted. Refer to the dimensions
for the rectangular type.
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
8
A3G
A3G
■ CONVEX TYPE PUSHBUTTON SWITCH
Rectangular (A3GJ)
Panel cutout
op view)
ess is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
0
.
panel cutout becomes 16.2 + 3 mm
0
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
Rectangular (A3GJ)
with screw terminals
Panel cutout
Note
when the X dimension (the space between
terminals of different polarity) is maintained
at 3.5 mm. When the X dimension is not
required, switches may be mounted at 24.5
mm for the general-purpose pushbutton type,
or at 26 mm for the rectangular concave
type. The pitch should be as large as
possible to maintain space to extend the lead
wire and make it easier to wire.
Panel cutout
(top view)
ess is
2. When using the spring mounting
clip for snap-in mounting, the
panel cutout becomes 16.2 + 3 mm
0
0
.
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
9
A3G
A3G
Unit: mm (inch)
■ CONVEX TYPE PUSHBUTTON SWITCHES continued
Panel cutout
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
panel cutout becomes 16.2 + 3 mm
0
0
.
have been omitted. Refer to the dimensions
for the rectangular type.
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
■ INDICATORS
Rectangular indicator (M2GJ)
Panel cutout
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
0
.
panel cutout becomes 16.2 + 3 mm
0
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
Square indicator (M2GA)
Panel cutout
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
panel cutout becomes 16.2 + 3 mm
0
.
0
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
10
A3G
A3G
Roun
with
Panel cutout
(top view)
Note: 1. Recommended panel thickness is
0.5 to 5 mm.
2. When using the spring mounting
clip for snap-in mounting, the
panel cutout becomes 16.2 + 3 mm
0
.
0
in diameter, and recommended
panel thickness is 0.5 to 3.5 mm.
■ CASES
Rectangular
Square
Round
A3GJ-6011-1
A3GJ-6021-1
A3GJ-6011-3
A3GJ-6021-3
A3GA-6011-1
A3GA-6021-1
A3GA-6011-3
A3GA-6021-3
A3GT-6011-1
A3GT-6021-1
A3GT-6011-3
A3GT-6021-3
■ LAMPS
LED
Incandescent Lamp
Neon Lamp
11
A3G
A3G
Unit: mm (inch)
■ SOLDER TERMINALS
SPDT switch
DPDT switch
Indicator
Lighted type
Lighted type
Display lamp
holes
■ SCREW TERMINALS
SPDT switch
DPDT switch
Indicator
12
A3G
A3G
■ WITH INSTALLED SWITCH GUARD
Rectangular types
Panel cutout
(top view)
Square and Round types
Panel cutout
(top view)
■ WITH MOUNTED DUST COVER
Rectangular types
Panel cutout
(top view)
13
A3G
A3G
Unit: mm (inch)
■ WITH MOUNTED DUST COVER continued
Panel cutout
(top view)
Round type
Panel cutout
(top view)
■ SWITCH UNIT
Dummy
A3G-3000
■ MOUNTING CLIP
Spr
A3
Extractor
14
A3G
A3G
■ LEGEND PLATES
Note: The plate is 0.6 mm thick and made of polycarbonate resin (IP40) or polyacrylate (IP65).
■ SCREW FITTING
A
■ PANEL PLUG
Select the plug that fits the panel design and mount from the front of the panel. Panel cutouts are the same as those for switches.
15
A3G
A3G
Assembly/Disassembly
■ MOUNTING AND REPLACING THE OPERATING SECTION
Mounting directions of the LED/lamp for the pushbutton unit
(1) For the lighted type switch:
(2) For the indicator:
Insert the LED/lamp guide into the narrower opening
in the indicator's receptacle.
Fit the LED/lamp so that its guide projection is inserted into
the wider opening in the receptacle of the pushbutton unit.
LED/Lamp guide
LED/Lamp guide
Groove in the indicator
LED/Lamp guide
Projections on the LED/lamp
Note: Push the LED/lamp projections into the base groove. The LED/lamp is flexibly mounted when used for illumination and is rigidly
mounted when used for indicators.
Removing lamp from the pushbutton unit
LED/lamp projections
disconnected from
the grooves
Position the functional unit as shown in (1). Press down on the
LED/lamp angling it in the direction indicated by A. Side B of the
LED/lamp disconnects and side C angles away from the
pushbutton unit so that it looks like (2). Turn the LED/lamp in the
(3)
(1)
LED/lamp
direction indicated by D. The LED/lamp projections (2 locations)
will disconnect from the LED/lamp groove so that it looks like (3).
Pull in the E direction and remove the LED/lamp.
Functional unit
(4)
(2)
B
A
E
D
C
Projections of the switch unit
Mounting directions for the pushbutton unit and the switch unit
Insert the LED/lamp unit into the aperature of the switch unit with the LED/lamp
unit's guide facing the side of the aperature mouth that does not have the two
projections. The pressure applied during insertion should be 2.5 kg min.
Note: Since the mounting directions of the pushbutton unit are the opposite for
the lighted type switch and the indicator application, pay special attention
to the direction of the legend plate.
Face the guide of the LED/lamp unit toward
the side without the projections
Removing the pushbutton unit
Pull the cap of the functional unit while holding the recessed guide
on both sides.
Recessed guide
Note: Do not use radio pliers to remove the cap as they may cause damage.
16
A3G
A3G
Mounting
After installing the main unit, mount the socket unit on the panel surface.
■ NUT MOUNTING
Panel
Mountibg nut
Insert the switch unit from the front of the panel. Place the lock
fitting and mounting nut on the terminal side and tighten the
mounting nut. For the IP65 type, use the rubber seal. Align the
anti-turn piece with the grooves and insert it so that the edge
section faces the panel. Tighten the mounting to a torque of
10 kg-cm or less.
Groove
Lock fitting
Edge
■ SNAP-IN MOUNTING
Fit the spring mounting clip for snap-in mounting
to the switch unit. Insert the tab of the spring
mounting clip into the two grooves on the
threaded part of the switch unit.
Spring mounting clip
Note: Be sure to use two spring mounting clips
and see that each is firmly inserted into the
grooves. Do not use for IP65-type
switches.
Spring mounting clip
Push the tabs of the spring mounting
clips firmly into the grooves
Insert the switch unit from the front of the
panel and secure it.
■ SOCKET MOUNTING
Mount the socket to the switch unit. As the socket mounts to the
switch unit in only one direction, the white mark on the switch unit
and that on the socket must be aligned for mounting.
White mark
White mark
■ REMOVING SOCKET
Press the Lock button on the socket and pull to remove.
Pull straight off when removing the socket.
17
A3G
A3G
OMRON ELECTRONICS, INC.
One East Commerce Drive
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. GC SW5
4/98
Specifications subject to change without notice.
Printed in the U.S.A.
18
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明