A3U-TMS-A1C-5M [OMRON]

Special Switch, SPDT, 0.1A, 30VDC;


型号：	A3U-TMS-A1C-5M
厂家：	OMRON ELECTRONICS LLC
描述：	Special Switch, SPDT, 0.1A, 30VDC 开关光电二极管
文件：	总8页 (文件大小：831K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

New Product

Plateau Head Pushbutton Switch

A3U

Easy connector enables less assembly and less wiring

• Highly reliable Major Omron basic switch, SS model built in.

• Possible cross over wiring on circuit construction.

• Easy one push to connect the Operation and Switch Units.

• 22 dia of the push button head size is suitable for operation.

Model Number Structure

Model Number Legend....For information on combinations, refer to Ordering Information.

(4) Voltage Used (LED)

( )

( ) ( ) ( )

( )

A3U -T

- A C- M

Symbol

Operating Voltage

No symbol

Non-lighted

5 VDC

12 VDC

24 VDC

(1) Lighted/Non-lighted

(3) Color of Pushbutton and Light

Symbol

No symbol

Type

Non-lighted

Lighted

Non-Lighted

(Cap type/Color)

Non-Transparent Cap/White

Transparent Cap/White

Transparent Cap/Red

Symbol

Color

(Cap type/Color)

Transparent Cap/White

−

White

Red

(5) Contact Configuration

Transparent Cap/Red

(2) Flange Color

Symbol

Type

SPDT

DPDT

Yellow Transparent Cap/Yellow Transparent Cap/Yellow

Green

Umber Transparent Cap/White

Blue

Black

Symbol

Color

Black

Metallic

Transparent Cap/Green

−

(6) Degree of Protection

Transparent Cap/Blue

Non-Transparent Cap/Black

Transparent Cap/Black

−

Symbol

None

Protection

IP40

IP65 (Oil-proof type)

Ordering Information

Plateau Head Pushbutton Switches

Degree of Protection : IP40

Flange Color: Black

Flange Color: Metallic

LED

Voltage

@Pushbutton

color symbol

LED

Lighting Output

Voltage

@Pushbutton

color symbol

Lighting Output

Model

5 VDC A3UL-TB@-1A1C-M

12 VDC A3UL-TB@-2A1C-M

24 VDC A3UL-TB@-3A1C-M

5 VDC A3UL-TB@-1A2C-M

12 VDC A3UL-TB@-2A2C-M

24 VDC A3UL-TB@-3A2C-M

5 VDC A3UL-TBG-1A1C-M

12 VDC A3UL-TBG-2A1C-M

24 VDC A3UL-TBG-3A1C-M

5 VDC A3UL-TBU-1A1C-M-S

12 VDC A3UL-TBU-2A1C-M-S

24 VDC A3UL-TBU-3A1C-M-S

5 VDC A3UL-TBG-1A2C-M

12 VDC A3UL-TBG-2A2C-M

24 VDC A3UL-TBG-3A2C-M

5 VDC A3UL-TBU-1A2C-M-S

12 VDC A3UL-TBU-2A2C-M-S

24 VDC A3UL-TBU-3A2C-M-S

5 VDC A3UL-TB@-1A1C-M

12 VDC A3UL-TB@-2A1C-M

24 VDC A3UL-TB@-3A1C-M

5 VDC A3UL-TB@-1A2C-M

12 VDC A3UL-TB@-2A2C-M

24 VDC A3UL-TB@-3A2C-M

5 VDC A3UL-TM@-1A1C-M

SPDT 12 VDC A3UL-TM@-2A1C-M

24 VDC A3UL-TM@-3A1C-M

5 VDC A3UL-TM@-1A2C-M

DPDT 12 VDC A3UL-TM@-2A2C-M

24 VDC A3UL-TM@-3A2C-M

SPDT

W, A

DPDT

5 VDC A3UL-TMG-1A1C-M

12 VDC A3UL-TMG-2A1C-M

24 VDC A3UL-TMG-3A1C-M

SPDT

5 VDC A3UL-TMU-1A1C-M-S

12 VDC A3UL-TMU-2A1C-M-S

24 VDC A3UL-TMU-3A1C-M-S

5 VDC A3UL-TMG-1A2C-M

12 VDC A3UL-TMG-2A2C-M

LED

24 VDC A3UL-TMG-3A2C-M

DPDT

5 VDC A3UL-TMU-1A2C-M-S

12 VDC A3UL-TMU-2A2C-M-S

24 VDC A3UL-TMU-3A2C-M-S

5 VDC A3UL-TM@-1A1C-M

SPDT

DPDT

SPDT 12 VDC A3UL-TM@-2A1C-M

24 VDC A3UL-TM@-3A1C-M

5 VDC A3UL-TM@-1A2C-M

DPDT 12 VDC A3UL-TM@-2A2C-M

24 VDC A3UL-TM@-3A2C-M

R, Y

SPDT

DPDT

−

A3U-TB@-A1C-M

A3U-TB@-A2C-M

SPDT

−

A3U-TM@-A1C-M

A3U-TM@-A2C-M

Non-

lighted

W, S, R, Y,

G, A, B, K

Non-

lighted

W, S, R, Y,

G, A, B, K

DPDT

A3U

Degree of Protection : IP65 (Oil-proof Type)

Flange Color: Black

Flange Color: Metallic

LED

Voltage

@Pushbutton

color symbol

LED

Lighting Output

Voltage

@Pushbutton

color symbol

Lighting Output

Model

5 VDC A3UL-TB@-1A1C-5M

5 VDC A3UL-TM@-1A1C-5M

SPDT 12 VDC A3UL-TM@-2A1C-5M

24 VDC A3UL-TM@-3A1C-5M

5 VDC A3UL-TM@-1A2C-5M

DPDT 12 VDC A3UL-TM@-2A2C-5M

24 VDC A3UL-TM@-3A2C-5M

5 VDC A3UL-TMG-1A1C-5M

SPDT 12 VDC A3UL-TB@-2A1C-5M

24 VDC A3UL-TB@-3A1C-5M

5 VDC A3UL-TB@-1A2C-5M

DPDT 12 VDC A3UL-TB@-2A2C-5M

24 VDC A3UL-TB@-3A2C-5M

5 VDC A3UL-TBG-1A1C-5M

12 VDC A3UL-TBG-2A1C-5M

W, A

12 VDC A3UL-TMG-2A1C-5M

24 VDC A3UL-TBG-3A1C-5M

SPDT

24 VDC A3UL-TMG-3A1C-5M

SPDT

5 VDC A3UL-TBU-1A1C-5M-S

5 VDC A3UL-TMU-1A1C-5M-S

12 VDC A3UL-TBU-2A1C-5M-S

24 VDC A3UL-TBU-3A1C-5M-S

5 VDC A3UL-TBG-1A2C-5M

12 VDC A3UL-TBG-2A2C-5M

12 VDC A3UL-TMU-2A1C-5M-S

24 VDC A3UL-TMU-3A1C-5M-S

5 VDC A3UL-TMG-1A2C-5M

12 VDC A3UL-TMG-2A2C-5M

LED

24 VDC A3UL-TBG-3A2C-5M

DPDT

24 VDC A3UL-TMG-3A2C-5M

DPDT

5 VDC A3UL-TBU-1A2C-5M-S

5 VDC A3UL-TMU-1A2C-5M-S

12 VDC A3UL-TBU-2A2C-5M-S

24 VDC A3UL-TBU-3A2C-5M-S

5 VDC A3UL-TB@-1A1C-5M

12 VDC A3UL-TMU-2A2C-5M-S

24 VDC A3UL-TMU-3A2C-5M-S

5 VDC A3UL-TM@-1A1C-5M

SPDT 12 VDC A3UL-TB@-2A1C-5M

24 VDC A3UL-TB@-3A1C-5M

SPDT 12 VDC A3UL-TM@-2A1C-5M

24 VDC A3UL-TM@-3A1C-5M

R, Y

5 VDC A3UL-TB@-1A2C-5M

5 VDC A3UL-TM@-1A2C-5M

DPDT 12 VDC A3UL-TB@-2A2C-5M

24 VDC A3UL-TB@-3A2C-5M

DPDT 12 VDC A3UL-TM@-2A2C-5M

24 VDC A3UL-TM@-3A2C-5M

SPDT

−

A3U-TB@-A1C-5M

A3U-TB@-A2C-5M

SPDT

−

A3U-TM@-A1C-5M

A3U-TM@-A2C-5M

Non-

lighted

W, S, R, Y,

G, A, B, K

Non-

lighted

W, S, R, Y,

G, A, B, K

DPDT

Accessories and Tools (Sold Separately)

Accessories

Accessory

Appearance

Type

Model number

Remarks

Used to plug a panel cutout hole for fu-

ture expansion.

Do not use it on a panel cutout hole that

will be used to position a Switch and en-

sure that the Switch will not rotate. Use

this Plug for a 25-dia. panel cutout hole.

Refer to page 6 for information on panel

cutout holes.

Panel Plug

A22Z-3530

The color is black.

25-dia. Ring

A22Z-R25

Used together with a Panel Plug.

Round

Cap Removal Suction

Cup

A3UZ-3010

A3UZ-5010-10

Used to remove a cap.

Used to connect to a connector.

Lead length: 1 m

Harness

Tools

Tool

Appearance

Type

Model number

A22Z-3905

Remarks

Used to tighten nuts from the back of

the panel and to replace caps on Light-

ed Emergency Stop Switches.

Tightening Tool

−

A3U

Specifications

Approved Standard Ratings

Certification Authority

UL (See Note: 1 and Note: 2)

CSA (See Note: 1 and Note: 2)

CSA C22.2 No. 14

TÜV (See Note: 3)

EN60947-5-1

UL508

Certification no.

CSA C22.2 No.14

Rating

30 VDC 0.1 A

E41515

30 VDC 0.1 A

2650068

12 30 VDC 0.1 A

J50236157

File no.

Note: 1. Only Switch Blocks are recognized by UL/CSA. (Surrounding air Temperature: 55 °C)

Note: 2. Please use the power supply specified in UL/CSA class 2.

Note: 3. Use 4A 250V as short-circuit protective device when using under EN-compliant rating standard (IEC60127-2 SS1).

Ratings

Contacts

Super-bright LED

30 VDC, 0.1 A (Resistive load)

Minimum applicable load: 1 mA at 5 VDC

Rated voltage

5 VDC

Rated current

Operating voltage

5 VDC ± 5 %

12 VDC

15 mA

12 VDC ± 5 %

24 VDC ± 5 %

Rated values are obtained from tests conducted under the following conditions.

1. Load: Resistive load

2. Mounting conditions: No vibration and no shock

3. Temperature: 20 ± ±2 °C

4. Operating frequency: 20 operations/min

24 VDC

Characteristics

Operating Characteristics

Item

Pushbutton Switch

Features

A3U

Allowable Mechanical

operating

60 operations/minute max.

Operating force (OF) max.

Pretravel (PT) max.

4.5 N

Electrical

frequency

30 operations/minute max.

3.3 mm

3.7 mm

Total travel (TT) max.

Insulation resistance

Contact resistance

100 MΩ min. (at 500 VDC)

250 mΩ max. (initial value)

Between terminals of

same polarity

500 VAC, 50/60 Hz for 1 minute

1,500 VAC, 50/60 Hz for 1 minute

500 VAC, 50/60 Hz for 1 minute

Circuit Diagram

Between terminals of

different polarity

Dielectric

strength

SW1

Between each

terminal and ground

Between all LED terminals

and all the other terminals

Vibration

resistance

Shock

resistance

10 to 55 Hz, 1.5-mm double amplitude

(malfunction within 1 ms)

Malfunction

LED

300 m/s²max. (malfunction within 1 ms)

Mechanical

Electrical

1,000,000 operations min.

200,000 operations min.

40 N max.

Durability

Connector holding force

Rated insulation voltage (Ui)

Electric shock protection class

Degree of contamination

Between terminals of

SW2

30 V (EN60947-5-1)

Class II

3 (EN60947-5-1)

Note3

same polarity

Impulse

1. This circuits shows the lighted/bipolar type.

2. SW2 isn't mounted on 1 pole type.

3. An LED and R aren't mounted on the non-lighted type.

Between terminals of

withstand

800 V (EN60947-5-1)

different polarity

voltage

Between each

terminal and ground

Conditional short-circuit current 100A (EN60947-5-1)

Conventional enclosed thermal

current (Ithe)

0.1A (EN60947-5-1)

Weight

Approx. 30 g

Degree of protection

IP40, IP65 (Oil-proof type)

-20 °C to 70 °C (Non-lighted type)

Ambient operating temperature -20 °C to 70 °C (lighted type)

(with no icing or condensation)

Ambient operating humidity

Ambient storage temperature

Ambient storage humidity

35 % to 85 % RH

-40 °C to 70 °C

(with no icing or condensation)

35 % to 85 % RH

A3U

Dimensions

(unit: mm)

A3U

Directionality display

mark)

Connector B10B-PASK (JST)

Terminal No.

(

22 dia.

1.8

46.8

49.8

Mouthing

nut

Lot. No.

Switch unit

Pushbutton Unit

Lock ring

Marking

Safety Precautions

Refer to Safety Precautions for All Pushbutton Switches/Indicators.

Operation Unit.

2. For a Switch with IP65 protection, make sure that the rubber

Precautions for Safe Use

washer is in place between the Operation Unit and the panel.

3. Align the Lock Ring with the slot on the case and insert it so that

the edge is flush with the panel.

• Do not disassemble or modify the Switch under any

circumstances. Doing so may cause malfunction.

• Do not drop or subject the Switch to extreme shock or force.

This may prevent the Switch from functioning to its full capability.

• The durability of the Switch varies considerably depending on the

switching conditions. Always test the switch under actual working

conditions before application and use the Switch only for the

number of switching operations allowed.

• Do not allow the load current to exceed the rated value. This may

damage or burn out the Switch.

• Refer to the Circuit Diagram and make sure to wire correctly. Only

the terminal (1) is printed and the right end of the terminal is read

as (10).

4. Tighten the Mounting Nut to between 0.98 and 1.96

5. To mount the Switch Unit to the Operation Unit, align the the

triangle marks on the Operation Unit and Switch Unit and insert

the Switch Unit until it locks securely in place.

6. The push marks on both sides are only for removal. Do not push

them when you insert the Switch Unit into the Pushbutton Unit.

Otherwise, the Pushbutton Unit will be hooked incorrectly.

7. To remove the Switch, press the levers on both sides in the

direction indicated by PUSH marks. Applying too much force

may damage the Switch.

8. Remove the Switch Unit before you remove the Pushbutton Unit.

If you loosen the mounting nut while the Switch Unit is still

attached, you will damage the Pushbutton Unit.

The switch back

Rubber washer

Lock Ring

Terminal (1)

Triangle Mark Lever

• Do not use the Switch in locations where explosive or flammable

gases or liquid may be present or scattered. The electric ark or the

heat caused by switching contacts may trigger off a fire or

explosion.

• Do not use the Switch in locations where toxic gases, such as H2S,

SO2, NH3, HNO3, and Cl2, may be present, or in locations subject

to high temperature or humidity. Doing so may damage the Switch

due to contact failure or corrosion.

Tab

Operation Unit

Switch Unit

Mounting Nut

Panel

• Do not let the Switch submerged in oil or water, or use in locations

continuously subject to splashes of oil/water. Doing so may result

in oil or water entering the Switch.

• Do not use the Switch in the following locations;

- subject to severe temperature changes.

- subject to high humidity or condensation.

- subject to severe vibration or shock.

- where direct rays of the sun strike.

- where sea breeze may be present.

• When the Switch is exposed to the environment that are not

required, or stored in locations where condensation presents, or

damaged by fall out, or stored for more than an year, please test it

under the usage conditions before application.

• Mounting and Removing the Switch

1. Insert the Operation Unit from the front of the panel, insert the

Lock Ring and Mounting Nut from the back of the panel, and

tighten the Mounting Nut. Then, attach the Switch Unit to the

A3U

• Wiring

2) Attach the cap, aligning the slots on the slot on the cap with the

tab on the operation plunger.

1. Do not wire the Switch while power is being supplied. Doing so

may result in electric shock.

Cap

2. Make sure to insert the connector to the end. This may prevent

the Switch from functioning to its full capability.

3. Do not subject the Switch to an excessive force when wiring. Fix

the cables first to avoid the connector and cables from being

pulled with. Otherwise, the connector may be disassembled or

damaged, resulting in the contact damages.

Cutout Portions

Operation Plunger

Protruding Portions

Too much tension

to the cables.

Appropriate force

to the cables.

• Character Films

1) In addition to engraving characters on legend plungers, you can

insert a character film to display characters.

Applicable Character Film Size

4. Refer to specification of each connector or catalogue for details

of installing or wiring the terminal side of the connector.

Recommended connector;

19 0.1

1.1⁺₀^0.2

Manufacture

Name

Contact

Housing

Model

Applicable lead wire

AWG#26 to 22

20 0.1 dia.

SPHD-002T-P0.5

SPHD-001T-P0.5

PAP-10V-S

J.S.T. Mfg Co.

AWG#28 to 24

AWG#28 to 22

1.1⁺₀^0.2

19 0.1

• Choose the applicable contact to the wire.

(Unit: mm)

Precautions for Correct Use

Thickness: 0.2 mm max.

Recommended material: Polyethylene

Note: A Character Film is not included with the product.

• Attaching and Removing Caps and Legend Plungers

Removal

1) Use the A3UZ-3010 Cap Removal Suction Cup (sold

separately) to remove the cap.

2)The following figure shows the tabs on the legend plunger that

are used to position the character film.

Tabs for character

film positioning

Character film

2) After you remove the cap, you can remove the legend plunger

and engrave it.

You cannot remove the legend plungers from Switches with

IP65 protection.

Attachment

1) The legend plunger fits in only one direction. Align the tabs on

the legend plunger with the slots on the operation plunger and

press the cap onto the operation plunger.

Operation Plunger

Legend Plunger

Cap

Insert the legend plunger so that

the groove widths are lined up.

A3U

• Operating Environment

1. This Switch is intended for indoor use only. Do not use the

Switch outdoors.

2. Do not set the Switch in locations where powders, mud, or any

other substances may be piled, or subject to any splashes of oil

or water. Always test the switch under actual working conditions

before application.

3. The Switches with oil-resistant IP65 protection use NBR rubber

and are resistant to general cutting oils and cooling oils. Some

special oils, however, cannot be used with these Switches.

Contact your OMRON representative for details.

• Mounting panels

1. Set mounting panel thickness to be 0.8 to 3.2 mm.

2. The panel dimension is set as below;

2.4 _-0.1

4-R0.5 max.

+0.4

25.2 dia.

-0.1

25.2 0.1 dia.

23.5 ⁺₀^0.1

(Unit: mm)

Cutout Hole for Positioning

and to Prevent Switch Rotation

- The value in ( ) indicated below is the minimum value

suggested for easy detaching of the Switch.

- Minimum panel pitch is 30/32 mm. Consider the flexibility and

allowance of detaching and wiring, set the pitch to the

appropriate value.

- Leave some spaces for a finger between panels, so as to pinch

the levers.

- Place the panels in the same direction. Do not set the

connectors face to face for easy removal.

30 min.

(preferably 45 min.)

32 min.

(preferably 40 min.)

(Unit: mm)

Wrong setup :

Connectors are too closely placed.

Right setup :

Same direction

Levers are too close and

cannot be pushed.

Some rooms for fingers to push.

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have

any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing

by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other

claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,

installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or

unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in

writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is

not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,

or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with

respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it

to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice

to change part numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be

assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to

confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

OMRON Corporation

Tokyo, JAPAN

Industrial Automation Company

Authorized Distributor:

Contact: www.ia.omron.com

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69, 2132 JD Hoofddorp

The Netherlands

OMRON ELECTRONICS LLC

2895 Greenspoint Parkway, Suite 200

Hoffman Estates, IL 60169 U.S.A

Tel: (31)2356-81-300/Fax: (31)2356-81-388

Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

In the interest of product improvement,

specifications are subject to change without notice.

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road # 05-05/08 (Lobby 2),

Alexandra Technopark,

Printed in Japan

0115 (0413)

PuDong New Area, Shanghai, 200120, China

Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

CSM_4_1_0115

Cat. No. A224-E1-02

Singapore 119967

Tel: (65) 6835-3011/Fax: (65) 6835-2711

A3U-TMS-A1C-5M [OMRON]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E