C500-IDS22 [OMRON]
Analog Circuit,;
| 型号： | C500-IDS22 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Analog Circuit, |
| 文件： | 总25页 (文件大小：612K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
R
Microwave RFID System
V620
Microwave RFID System Provides
Long-distance Transmission up to 2 m
H Data is transmitted by 2,450-MHz
microwave signals, thus enabling a
transmission distance of up to 2 m coupled
with superior noise resistance
H Data Carrier conforms to IEC 60529 IP67
and the R/W Antenna satisfies IP66 for
superior environmental resistance
H Large-capacity 8K-byte memory stores
assembly information, inspection
information, and classification information
as well as product information in the
production line
H Low battery detection function is provided
Ordering Information
Data Carriers
Item
Part number
Specifications/Design
Built-in-battery DC
V620-D8KR01
IEC 60529 IP67
Dimensions: 86 × 54 × 23.5 mm
Built-in lithium battery
8K-byte memory
R/W Antennas
Type
Part number
Specifications/Design
2-m Transmission
Dimensions: 240 × 190 × 41 mm
V620-H01 (0.5 m)
V620-H01 (10 m)
V620-H02 (0.5 m)
V620-H02 (10 m)
0.5-m cable
10-m cable
0.5-m cable
10-m cable
0.5-m Transmission
Dimensions: 240 × 190 × 41 mm
67
V620
ID Controllers
V620
Type
Part number
Specifications/Design
AC Power Supply
100 to 240 VAC, 50/60 Hz
Two R/W antenna connectors
Dimensions: 200 × 100 × 100
mm
V620-CA1A
V620-CA2A
V620-CA8A
RS-232C host interface
RS-422 host interface
Parallel PNP host
interface
V620-CA9A
V620-CD1D
Parallel NPN host
interface
DC Power Supply
Handheld
24 VDC
R/W antenna connectors
Dimensions: 165 × 68 × 80 mm
RS-232C host interface
V620-CB-US-S (Kit)
V620-CB-US-S1 (Kit)
A Battery Charger, Ni-Cd Battery Pack, Battery Case, and
Carrying Belt are included
Ni-cd Battery, Battery Case, and Carrying Belt are
included
ID Sensor Units/ID Adapters
Part number
Specifications
ID Sensor Unit
SYSMAC CV500, CV1000,
CVM1, C500(F), C1000H(F),
C2000H PLCs
C500-IDS21
C500-IDS22
General-purpose
Long-distance
transmission
C200H-IDS21
C500-IDA22
For the C200H and C200HS
PLCs
General-purpose
ID Adapter
Required when using the
C500-IDS22 ID Sensor Unit
Long-distance
transmission
Accessories (Order Separately)
Item
Part number
Specifications/Design
Extension Cable
Standard cable
(Connectors are not
water-resistant.)
V620-A40
V620-A41
V620-A42
10 m
20 m
30 m
RS-232C Cables (Order Separately)
Part number
Cable length
Applicable ID Controller
V620-CA1A
XW2Z-200P
XW2Z-500P
2 m
5 m
V620-CD1D
XW2Z-200S
XW2Z-500S
2 m
5 m
68
V620
ID Controller Communications Connectors
V620
Part number
Name
Applicable ID Controller
V620-CA2A
V620-CD1D
XM2A-0901
XM2S-0911
Connector Plug
Connector Hood
V620-CA1A
XM2A-2501
XM2S-2511
Connector Plug
Connector Hood
V620-CA8A
V620-CA9A
MR-50F (Honda Tsushin Kogyo)
MR-50L (Honda Tsushin Kogyo)
Connector Plug
Connector Hood
69
V620
V620
System Configuration
Host System
General-purpose PLC,
Serial I/F Unit, or Parallel
I/F Unit
Host Computer
Personal Computer
PLC (Programmable Logic Controller)
Parallel I/O
PLC Bus
ID Controllers
RS-232C
RS-422
RS-232C Interface
RS-422 Interface
Parallel PNP Inter-
face
ID Sensor Units
Handheld ID
Controller
C500-
IDS21
C200H-
IDS21
V620-CB-US
V620-CA8A
Parallel NPN Inter-
face
V620-CA1A
V620-CD1D
V620-CA2A
V620-CA9A
Cable Connection
(Snap-on Connectors)
R/W Antennas
V620-H02
V620-H01
0.5 m
Transmission
Distance
2 m
Transmission
Distance
Data Carriers
V620-D8KR01
70
V620
V620
Specifications
Data Carriers
Item
V620-D8KR01
Memory Capacity
Battery life (see note)
Ambient temperature
Ambient humidity
Protection ratings
Vibration resistance
Shock resistance
Weight
8K byte
Refer to Battery Life vs. Amount of Data Transferred below
Operating: –25° to 70°C
Operating: 35% to 95%
IEC 60529 IP67
Destruction: 10 to 55 Hz, 1.5-mm double-amplitude for 2 hrs each in X, Y, and Z directions
2
Destruction: 500 m/x (approx. 50G) for 3 times each in X, Y, and Z directions
Approx. 120 g
Note: A low battery detection function is built-in.
Read/Write (R/W) Antenna
Item
V620-H01
V620-H02
Transmission frequency
Antenna’s supply power
Transmission beam width
Ambient temperature
Ambient humidity
2,450 MHz
3 mW max.
1 mW max.
±20_C (antenna gain: 13 dB)
±23_C (antenna gain: 12 dB)
Operating: –25° to 70°C
Operating: 35% to 95%
Insulation resistance
Dielectric strength
Protection ratings
50 MΩ (at 500 VDC) between cable terminals and case
500 VAC, 50/60 Hz for 1 min between cable terminals and case
IEC 60529 IP66
Vibration resistance
Shock resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z directions
2
Destruction: 500 m/s (approx. 50G) for 3 times each in X, Y, and Z directions (18 times total)
Cable length (see note 2)
Weight
Standard lengths of 0.5 m and 10 m
Approx. 2 kg (with 10-m cable, the R/W Antenna itself weighs 1.4 kg max.)
Note: 1. Connectors are not water-resistant.
2. Various intermediate lengths of cable are available. (Total cable length: 30.5 m max.)
71
V620
ID Controllers
V620
Item
V620-CA1A
V620-CA2A
V620-CA8A
V620-CA9A
V620-CD1D
Host interface
RS-232C
RS-422
(Max. of 16 Units
Parallel PNP output
Parallel NPN output
RS-232C
can be connected.)
Possible number of R/W
Antennas
2
1
Power supply voltage
100 to 240 VAC, 50/60 Hz
24 VDC
Acceptable power supply 85 to 264 VAC
20.4 to 26.4 VDC
voltage
Power consumption
Insulation resistance
35 VA max.
7.2 W max.
50 MΩ min. (at 500 VDC) between power terminals and case, between I/O terminals and case, or between the
power supply terminals and I/O terminals
Dielectric strength
1,500 VAC, 50/60 Hz for 1 min between the points listed above;
Leakage current: 10 mA max.
1,000 VAC, 50/60 Hz
for 1 min between the
points listed above.
Leakage current:
10 mA max.
Noise immunity
1,500 V (p-p) pulses of 100 ns to 1 µs pulse width with a 1 ns rise time
Vibration resistance
Destruction:
Malfunction:
10 to 150 Hz, 0.3-mm double amplitude for 32 min each in X, Y, and Z directions
10 to 150 Hz, 0.2-mm double amplitude for 32 min each in X, Y, and Z directions
2
Shock resistance
Destruction: 200 m/s (approx. 20G) for 3 times each in X, Y, and Z directions
Ambient temperature
Operating: –10° to 55°C
Storage: –25° to 65°C
Ambient humidity
Operating conditions
Memory back-up
Operating: 35% to 85% (with no condensation)
No corrosive gases
A capacitor backs up the most recent error data and statistical error data for up to 20 days
(at 25_C) after a power interruption
Memory is not backed
up, but error
information can be
read from a host
computer at start-up
Diagnostic functions
Ground
Checks for CPU errors, memory errors, power interruptions, and transmission errors
Ground to 100 Ω or less
Protection rating
Standards/Approvals
Weight
For inter-panel installation (IEC 60529 IP30)
See Appendix B
Approx. 890 g
Approx. 930 g
Approx. 960 g
Approx. 360 g
72
V620
Handheld ID Controller
V620
Item
V620-CB-US
Power supply
Built-in nickel-cadmium batteries (6 VDC) or 6 AA alkaline batteries (9 VDC)
700 mA max.
Power consumption
Continuous operating time (see note)
3 hrs min. when using the built-in nickel-cadmium batteries;
1.5 hrs min. when using the alkaline batteries
Automatic power-saver
The power is turned off automatically if a key input or response is not received in 10 min
Automatic command cancellation
A command will be cancelled automatically if a response is not received from a Data Carrier within
2 min
Low battery indicator
User memory
This display appears when the battery voltage falls below the minimum voltage required for operation
32K bytes (Data will be retained for at least 24 hrs after batteries are removed)
Vibration resistance
Shock resistance
Ambient temperature
Destruction: 10 to 150 Hz, 0.15-mm single amplitude for 8 min each in X, Y, and Z directions
2
Destruction: 200 m/s (approx. 20G) 3 times each in X, Y, and Z directions
Operating: 0° to 45°C
Storage: –20° to +60°C (excluding the battery pack)
Ambient humidity
Operating conditions
Protection rating
Weight
Operating: 35% to 85%
No corrosive gases
IEC 60529 IP30
680 g max. (including the battery pack)
Note: The continuous operating time is for new, fully charged nickel cadmium batteries or new alkaline batteries used at room temperature.
An English display and UL-compatible Battery Charger are included with the V620-CB-US-S. The Battery Charger is not included with the
V620-CB-US-S1.
Monitor Unit
V600-P01 (for use with V620-CAjA Controllers)
The Monitor Unit is a monitoring device that can be mounted to an ID Controller. It can be used to test communications between the R/W Head and Data
Carrier when the RFID System is started up, check the data in Data Carriers, and read error information or statistical error information.
The specifications conform to those of the ID Controller, but the operating temperature range is 0_C to 40_C.
V620-CB-US-S Configuration
Model
Name
Handheld ID Controller
Remarks
V620-CB-US
V600-A11
V600-A12
V600-A13
V600-A14
Controller
Battery Case
Accessory (for alkaline batteries)
Accessory (built-in)
Accessory
Battery Pack (Ni-Cd)
Carrying Belt
Battery Charger (120 VAC)
Accessory
73
V620
ID Sensor Units (PLC Modules)
V620
Item
C500-IDS21 (for general use)
C500-IDS22 (for long-distance transmission)
(See note)
C200H-IDS21
Communications control
Possible number of R/W Heads
DC memory format
Dedicated time sharing
1 R/W Head
8-bit dedicated format
Commands
The following 6 commands are used: Read, Write, Auto read, Auto write, Abort, Cancel auto-command
processing
Transmission capacity
Diagnostic functions
Monitoring functions
Up to 502 bytes (251 words) of data can be
batch-transferred using the Intelligent I/O
instructions (READ/WRIT)
Up to 1024 bytes (512 words) of data can be
transferred (at 20 words/PLC cycle)
1. CPU watchdog timer
2. Detects transmission error with DC, absence of DC
3. Error log function, records transmission errors (with capacitor back-up)
A Handheld Programming Console (with a special keysheet) can be used to monitor operation (max.
cable length: 4 m). The following operations are possible: Read 1-byte, Write 1-byte, Continuous write,
Test, and Monitor error log
Memory back-up
The error information has a capacitor back-up. Data retained at least 15 days (at 25_C).
I/O word allocation
Two words are allocated when the Intelligent I/O
instructions (READ/WRIT) are used
Five words are allocated within the IR area (IR 100
to IR 199)
Four words are allocated when the Intelligent I/O
instructions (READ/WRIT) are not used
External power supply
250 mA min. at 24 VDC
400 mA max. at 5 VDC
---
Internal current consumption
250 mA max. at 5 VDC
120 mA max. at 26 VDC
(to drive the R/W Head)
Weight
700 g max.
400 g max.
Note: C500-IDS22 ID Sensor Units must be used with C500-IDA22 ID Adapters. The maximum cable extension length is 200 m.
Transmission Distance Specifications
Recommended combinations
Installation
Transmission
distance
Data Carrier and R/W
Antenna Mounting
Data Carrier
R/W Head
V620-H01
R/W Antenna
V620-D8KR01
Surface-mounted on
metal
Stationary
Moving
0 to 2 m
All metal
0 to 2 m
Data Carrier
Surface-mounted
on metal
V620-H02
Surface-mounted on
metal
Stationary
Moving
0 to 0.5 m
0 to 0.5 m
All metal
74
V620
V620
Transmission Time Specifications
The transmission time does not depend on the model of R/W Head or Data Carrier, although transmission times differ between Data Carriers with and
without batteries.
The turn around time (TAT) is the total time required from the issuance of a command from the host device (for example, a host computer) until the recep-
tion of a response.
The lower-level communications time does not include the host communications; it is the time required for communications between the R/W Head and
Data Carrier. The lower-level communications time is used in the equation for the DC speed.
DC Speed = (Distance travelled in the transmission range)/(Lower-level communications time)
s
RDH1
Command
s
RD001122
Response
Lower-level
communications time
TAT (Turn Around Time)
Transmission Time vs. Amount of Data
Transferred
The following graph shows the relationship between the trans-
mission time and the number of bytes transferred.
DC Speed vs. Amount of Data Transferred
The following graph shows the relationship between the speed
of the DC and the number of bytes transferred for three different
distances between the R/W Antenna (V620-H01) and the DC
(V620-D8KR01).
Read
Write
(Auto)
Write
150-cm separation
100-cm separation
50-cm separation
(Auto) Read
Amount of data transferred (bytes)
Number of Bytes
Transmission Range
V620-H01 & V620-D8KR01
V620-H02 & V620-D8KR01
R/W range
Unit: m
75
V620
V620
Data Carrier Battery Life
The following graphs show the relationship between the number of bytes read/written and the battery life.
3 yrs
4 yrs
5 yrs
6 yrs
Bytes per transmission
Mutual Interference
Mutual Interference between R/W Antennas
When using multiple R/W Antennas be sure to place R/W Antennas at the distances specified below to avoid malfunction caused by mutual interference.
Test and adjust the position before using as the interference distance may increase due to ambient metal or reflective surfaces. Mutual interference can be
avoided by using materials that absorb electronic waves.
V620-H01
Facing
V620-H02
Facing
RD/WT command and auto-command: 10 m min
RD/WT command and auto-command: 4 m min
R/W Antenna
R/W Antenna
Side-by-side
RD/WT command and auto-command: 5 m min
Side-by-side
RD/WT command and auto-command: 1.5 m min
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
Precautions
Data Carrier Battery
Do not disassemble, deform by applying pressure, heat at temperatures
exceeding 100_C, or burn. Doing so may cause the built-in lithium battery
to combust or explode.
76
V620
V620
Dimensions
Data Carriers
V620-D8KR01
86
25.5
Four, 4.5 dia.
mounting holes
5
76±0.2
5
54
44±0.2
23.5
10
Case:ABS plastic
Filler: Epoxy plastic
R/W Heads
V620-H01/H02
190
41
18
140±0.2
90
240
225±0.3
Four, 6
mount
8-c
(6
0.1
10
24
43
plastic
Filler: Epoxy plastic
Cable: PVC (oil-resistant)
14.7
77
V620
ID Controllers
V620
V620-CAjA (Multipurpose)
V600-P01 Monitor Unit
(For use with V600-CAjA and
V620-CAjA Controllers)
100
35.3
90±0.3
80.6
22.6
120.6
190±0.3
9.3
200
100
Four, 4.3 dia.
mounting
holes
V620-CD1D (Compact)
V620-CB-US Handheld ID
Controller
45.5
105
18
53
68
17.5
5.5
81
92
270
Two,
4.5 dia.
80
115
38
80
78
V620
V620
ID Sensor Units/ID Adapters
C500-IDS21/IDS22
C500-IDA22
Rack Dimensions (Reference)
250
Backplane
480
250
375
93
115
115
34.5
170
276
C200H-IDS21
Rack Dimensions (Reference)
130
435
130
330
Backplane
130
130
117
Approx. 200
100.5
35
260
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ELECTRONICS, INC.
OMRON CANADA, INC.
One East Commerce Drive
885 Milner Avenue
Schaumburg, IL 60173
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. GC RFID3
1/00
Specifications subject to change without notice.
Printed in U.S.A.
79
V620
ID Controllers
V620
Type
Part number
Specifications/Design
AC Power Supply
100 to 240 VAC, 50/60 Hz
Two R/W antenna connectors
Dimensions: 200 × 100 × 100
mm
V620-CA1A
V620-CA2A
V620-CA8A
RS-232C host interface
RS-422 host interface
Parallel PNP host
interface
V620-CA9A
V620-CD1D
Parallel NPN host
interface
DC Power Supply
Handheld
24 VDC
R/W antenna connectors
Dimensions: 165 × 68 × 80 mm
RS-232C host interface
V620-CB-US-S (Kit)
V620-CB-US-S1 (Kit)
A Battery Charger, Ni-Cd Battery Pack, Battery Case, and
Carrying Belt are included
Ni-cd Battery, Battery Case, and Carrying Belt are
included
ID Sensor Units/ID Adapters
Part number
Specifications
ID Sensor Unit
SYSMAC CV500, CV1000,
CVM1, C500(F), C1000H(F),
C2000H PLCs
C500-IDS21
C500-IDS22
General-purpose
Long-distance
transmission
C200H-IDS21
C500-IDA22
For the C200H and C200HS
PLCs
General-purpose
ID Adapter
Required when using the
C500-IDS22 ID Sensor Unit
Long-distance
transmission
Accessories (Order Separately)
Item
Part number
Specifications/Design
Extension Cable
Standard cable
(Connectors are not
water-resistant.)
V620-A40
V620-A41
V620-A42
10 m
20 m
30 m
RS-232C Cables (Order Separately)
Part number
Cable length
Applicable ID Controller
V620-CA1A
XW2Z-200P
XW2Z-500P
2 m
5 m
V620-CD1D
XW2Z-200S
XW2Z-500S
2 m
5 m
68
V620
ID Controller Communications Connectors
V620
Part number
Name
Applicable ID Controller
V620-CA2A
V620-CD1D
XM2A-0901
XM2S-0911
Connector Plug
Connector Hood
V620-CA1A
XM2A-2501
XM2S-2511
Connector Plug
Connector Hood
V620-CA8A
V620-CA9A
MR-50F (Honda Tsushin Kogyo)
MR-50L (Honda Tsushin Kogyo)
Connector Plug
Connector Hood
69
V620
V620
System Configuration
Host System
General-purpose PLC,
Serial I/F Unit, or Parallel
I/F Unit
Host Computer
Personal Computer
PLC (Programmable Logic Controller)
Parallel I/O
PLC Bus
ID Controllers
RS-232C
RS-422
RS-232C Interface
RS-422 Interface
Parallel PNP Inter-
face
ID Sensor Units
Handheld ID
Controller
C500-
IDS21
C200H-
IDS21
V620-CB-US
V620-CA8A
Parallel NPN Inter-
face
V620-CA1A
V620-CD1D
V620-CA2A
V620-CA9A
Cable Connection
(Snap-on Connectors)
R/W Antennas
V620-H02
V620-H01
0.5 m
Transmission
Distance
2 m
Transmission
Distance
Data Carriers
V620-D8KR01
70
V620
V620
Specifications
Data Carriers
Item
V620-D8KR01
Memory Capacity
Battery life (see note)
Ambient temperature
Ambient humidity
Protection ratings
Vibration resistance
Shock resistance
Weight
8K byte
Refer to Battery Life vs. Amount of Data Transferred below
Operating: --25° to 70°C
Operating: 35% to 95%
IEC 60529 IP67
Destruction: 10 to 55 Hz, 1.5-mm double-amplitude for 2 hrs each in X, Y, and Z directions
2
Destruction: 500 m/x (approx. 50G) for 3 times each in X, Y, and Z directions
Approx. 120 g
Note: A low battery detection function is built-in.
Read/Write (R/W) Antenna
Item
V620-H01
V620-H02
Transmission frequency
Antenna’s supply power
Transmission beam width
Ambient temperature
Ambient humidity
2,450 MHz
3 mW max.
23 C (antenna gain: 12 dB)
1 mW max.
20 C (antenna gain: 13 dB)
±
E
±
E
Operating: --25° to 70°C
Operating: 35% to 95%
Insulation resistance
Dielectric strength
Protection ratings
50 MΩ (at 500 VDC) between cable terminals and case
500 VAC, 50/60 Hz for 1 min between cable terminals and case
IEC 60529 IP66
Vibration resistance
Shock resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z directions
2
Destruction: 500 m/s (approx. 50G) for 3 times each in X, Y, and Z directions (18 times total)
Cable length (see note 2)
Weight
Standard lengths of 0.5 m and 10 m
Approx. 2 kg (with 10-m cable, the R/W Antenna itself weighs 1.4 kg max.)
Note: 1. Connectors are not water-resistant.
2. Various intermediate lengths of cable are available. (Total cable length: 30.5 m max.)
71
V620
ID Controllers
V620
Item
V620-CA1A
V620-CA2A
V620-CA8A
V620-CA9A
V620-CD1D
Host interface
RS-232C
RS-422
(Max. of 16 Units
Parallel PNP output
Parallel NPN output RS-232C
can be connected.)
Possible number of R/W
Antennas
2
1
Power supply voltage
100 to 240 VAC, 50/60 Hz
24 VDC
Acceptable power supply 85 to 264 VAC
20.4 to 26.4 VDC
voltage
Power consumption
Insulation resistance
35 VA max.
7.2 W max.
50 MΩ min. (at 500 VDC) between power terminals and case, between I/O terminals and case, or between the
power supply terminals and I/O terminals
Dielectric strength
1,500 VAC, 50/60 Hz for 1 min between the points listed above;
Leakage current: 10 mA max.
1,000 VAC, 50/60 Hz
for 1 min between the
points listed above.
Leakage current:
10 mA max.
Noise immunity
1,500 V (p-p) pulses of 100 ns to 1 µs pulse width with a 1 ns rise time
Vibration resistance
Destruction:
Malfunction:
10 to 150 Hz, 0.3-mm double amplitude for 32 min each in X, Y, and Z directions
10 to 150 Hz, 0.2-mm double amplitude for 32 min each in X, Y, and Z directions
2
Shock resistance
Destruction: 200 m/s (approx. 20G) for 3 times each in X, Y, and Z directions
Ambient temperature
Operating: --10° to 55°C
Storage: --25° to 65°C
Ambient humidity
Operating conditions
Memory back-up
Operating: 35% to 85% (with no condensation)
No corrosive gases
A capacitor backs up the most recent error data and statistical error data for up to 20 days Memory is not backed
(at 25EC) after a power interruption
up, but error
information can be
read from a host
computer at start-up
Diagnostic functions
Ground
Checks for CPU errors, memory errors, power interruptions, and transmission errors
Ground to 100 Ω or less
Protection rating
Standards/Approvals
Weight
For inter-panel installation (IEC 60529 IP30)
See Appendix B
Approx. 890 g
Approx. 930 g
Approx. 960 g
Approx. 360 g
72
V620
Handheld ID Controller
V620
Item
V620-CB-US
Power supply
Built-in nickel-cadmium batteries (6 VDC) or 6 AA alkaline batteries (9 VDC)
700 mA max.
Power consumption
Continuous operating time (see note)
3 hrs min. when using the built-in nickel-cadmium batteries;
1.5 hrs min. when using the alkaline batteries
Automatic power-saver
The power is turned off automatically if a key input or response is not received in 10 min
Automatic command cancellation
A command will be cancelled automatically if a response is not received from a Data Carrier within
2 min
Low battery indicator
User memory
This display appears when the battery voltage falls below the minimum voltage required for operation
32K bytes (Data will be retained for at least 24 hrs after batteries are removed)
Vibration resistance
Shock resistance
Ambient temperature
Destruction: 10 to 150 Hz, 0.15-mm single amplitude for 8 min each in X, Y, and Z directions
2
Destruction: 200 m/s (approx. 20G) 3 times each in X, Y, and Z directions
Operating: 0° to 45°C
Storage: --20° to +60°C (excluding the battery pack)
Ambient humidity
Operating conditions
Protection rating
Weight
Operating: 35% to 85%
No corrosive gases
IEC 60529 IP30
680 g max. (including the battery pack)
Note: The continuous operating time is for new, fully charged nickel cadmium batteries or new alkaline batteries used at room temperature.
An English display and UL-compatible Battery Charger are included with the V620-CB-US-S. The Battery Charger is not included with the
V620-CB-US-S1.
Monitor Unit
V600-P01 (for use with V620-CAPA Controllers)
The Monitor Unit is a monitoring device that can be mounted to an ID Controller. It can be used to test communications between the R/W Head and Data
Carrier when the RFID System is started up, check the data in Data Carriers, and read error information or statistical error information.
The specifications conform to those of the ID Controller, but the operating temperature range is 0EC to 40EC.
V620-CB-US-S Configuration
Model
Name
Handheld ID Controller
Remarks
V620-CB-US
V600-A11
V600-A12
V600-A13
V600-A14
Controller
Battery Case
Accessory (for alkaline batteries)
Accessory (built-in)
Accessory
Battery Pack (Ni-Cd)
Carrying Belt
Battery Charger (120 VAC)
Accessory
73
V620
ID Sensor Units (PLC Modules)
V620
Item
C500-IDS21 (for general use)
C500-IDS22 (for long-distance transmission)
(See note)
C200H-IDS21
Communications control
Possible number of R/W Heads
DC memory format
Dedicated time sharing
1 R/W Head
8-bit dedicated format
Commands
The following 6 commands are used: Read, Write, Auto read, Auto write, Abort, Cancel auto-command
processing
Transmission capacity
Diagnostic functions
Monitoring functions
Up to 502 bytes (251 words) of data can be
batch-transferred using the Intelligent I/O
instructions (READ/WRIT)
Up to 1024 bytes (512 words) of data can be
transferred (at 20 words/PLC cycle)
1. CPU watchdog timer
2. Detects transmission error with DC, absence of DC
3. Error log function, records transmission errors (with capacitor back-up)
A Handheld Programming Console (with a special keysheet) can be used to monitor operation (max.
cable length: 4 m). The following operations are possible: Read 1-byte, Write 1-byte, Continuous write,
Test, and Monitor error log
Memory back-up
E
The error information has a capacitor back-up. Data retained at least 15 days (at 25 C).
I/O word allocation
Two words are allocated when the Intelligent I/O
instructions (READ/WRIT) are used
Five words are allocated within the IR area (IR 100
to IR 199)
Four words are allocated when the Intelligent I/O
instructions (READ/WRIT) are not used
External power supply
250 mA min. at 24 VDC
400 mA max. at 5 VDC
---
Internal current consumption
250 mA max. at 5 VDC
120 mA max. at 26 VDC
(to drive the R/W Head)
Weight
700 g max.
400 g max.
Note: C500-IDS22 ID Sensor Units must be used with C500-IDA22 ID Adapters. The maximum cable extension length is 200 m.
Transmission Distance Specifications
Recommended combinations
Installation
Transmission
distance
Data Carrier and R/W
Antenna Mounting
Data Carrier
R/W Head
V620-H01
R/W Antenna
V620-D8KR01
Surface-mounted on
metal
Stationary
Moving
0 to 2 m
All metal
0 to 2 m
Data Carrier
Surface-mounted
on metal
V620-H02
Surface-mounted on
metal
Stationary
Moving
0 to 0.5 m
0 to 0.5 m
All metal
74
V620
V620
Transmission Time Specifications
The transmission time does not depend on the model of R/W Head or Data Carrier, although transmission times differ between Data Carriers with and
without batteries.
The turn around time (TAT) is the total time required from the issuance of a command from the host device (for example, a host computer) until the recep-
tion of a response.
The lower-level communications time does not include the host communications; it is the time required for communications between the R/W Head and
Data Carrier. The lower-level communications time is used in the equation for the DC speed.
DC Speed = (Distance travelled in the transmission range)/(Lower-level communications time)
*
RDH1
Command
*
RD001122
Response
Lower-level
communications time
TAT (Turn Around Time)
Transmission Time vs. Amount of Data
Transferred
The following graph shows the relationship between the trans-
mission time and the number of bytes transferred.
DC Speed vs. Amount of Data Transferred
The following graph shows the relationship between the speed
of theDCand thenumber of bytes transferredfor threedifferent
distances between the R/W Antenna (V620-H01) and the DC
(V620-D8KR01).
Read
Write
(Auto)
Write
150-cm separation
100-cm separation
50-cm separation
(Auto) Read
Amount of data transferred (bytes)
Number of Bytes
Transmission Range
V620-H01 & V620-D8KR01
V620-H02 & V620-D8KR01
R/W range
Unit: m
75
V620
V620
Data Carrier Battery Life
The following graphs show the relationship between the number of bytes read/written and the battery life.
3 yrs
4 yrs
5 yrs
6 yrs
Bytes per transmission
Mutual Interference
Mutual Interference between R/W Antennas
When using multiple R/W Antennas be sure to place R/W Antennas at the distances specified below to avoid malfunction caused by mutual interference.
Test andadjust thepositionbeforeusingas theinterferencedistancemay increaseduetoambient metalorreflectivesurfaces. Mutualinterference canbe
avoided by using materials that absorb electronic waves.
V620-H01
Facing
V620-H02
Facing
RD/WT command and auto-command: 10 m min
RD/WT command and auto-command: 4 m min
R/W Antenna
R/W Antenna
Side-by-side
RD/WT command and auto-command: 5 m min
Side-by-side
RD/WT command and auto-command: 1.5 m min
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
R/W Antenna
Precautions
Data Carrier Battery
Do not disassemble, deform by applying pressure, heat at temperatures
exceeding100EC, orburn. Doingsomay cause thebuilt-in lithium battery
to combust or explode.
76
V620
V620
Dimensions
Data Carriers
V620-D8KR01
86
25.5
Four, 4.5 dia.
mounting holes
5
76±0.2
5
54
44±0.2
23.5
10
Case:ABS plastic
Filler: Epoxy plastic
R/W Heads
V620-H01/H02
190
41
18
140±0.2
90
240
225±0.3
Four, 6
mount
8-c
(6
0.1
10
24
43
plastic
Filler: Epoxy plastic
Cable: PVC (oil-resistant)
14.7
77
V620
ID Controllers
V620
V620-CAPA (Multipurpose)
V600-P01 Monitor Unit
(For use with V600-CAPA and
V620-CAPA Controllers)
100
35.3
90±0.3
80.6
22.6
120.6
190±0.3
200
9.3
100
Four, 4.3 dia.
mounting
holes
V620-CD1D (Compact)
V620-CB-US Handheld ID
Controller
45.5
105
18
53
68
17.5
5.5
81
92
270
Two,
4.5 dia.
80
115
38
80
78
9953
9953
,' 6HQVRU 8QLWV2,' $GDSWHUV
&8330,'6542,'655
&8330,'$55
5DFN 'LPHQVLRQV +5HIHUHQFH,
583
%DFNSODQH
7;3
583
6:8
<6
448
448
6718
4:3
5:9
&533+0,'654
5DFN 'LPHQVLRQV +5HIHUHQFH,
463
768
463
663
%DFNSODQH
463
463
44:
$SSUR[1 533
43318
68
593
127(= ',0(16,216 6+2:1 $5( ,1 0,//,0(7(561 7R FRQYHUW PLOOLPHWHUV WR LQFKHV GLYLGH E\ 58171
9
20521 (/(&7521,&6/ ,1&1
20521 &$1$'$/ ,1&1
2QH (DVW &RPPHUFH 'ULYH
;;8 0LOQHU $YHQXH
6FKDXPEXUJ/ ,/ 934:6
6FDUERURXJK/ 2QWDULR 04% 89;
40;33088020521
74905;909798
&DW1 1R1 *& 5),'6
4233
6SHFLILFDWLRQV VXEMHFW WR FKDQJH ZLWKRXW QRWLFH1
3ULQWHG LQ 8161$1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明