D2F-FL-A [OMRON]

Snap Action Switch; 速动开关


型号：	D2F-FL-A
厂家：	OMRON ELECTRONICS LLC
描述：	Snap Action Switch 速动开关开关
文件：	总8页 (文件大小：698K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

D^Sna2^{p A}F^{ction Switch}

Subminiature Snap Action Switch

• Switches 3 A loads (general-purpose), 1 A loads

(low force general-purpose) and 0.1 A loads(microvoltage/

microcurrent)

• Long life span assured by high-precision dual spring

reverse-action mechanism

• Flux penetration prevented by using an insert terminal and

allowing a height difference at the case bottom

• Ideal for a wide range of applications including appliances,

office equipment, audio and communications equipment

• RoHS Compliant

Ordering Information

Actuator

Contact

type

Model

Contact Model

Terminal type

Self-

Compact

Solder

PCB

supporting

Solder

Right-angle

D2F-01F-A

D2F-01-A

D2F-F-A

Left-angle

D2F-01F-A1

D2F-01-A1

D2F-F-A1

Pin plunger Microvoltage/ Low force 75 g

D2F-01F

D2F-01

D2F-01F-T

D2F-01-T

D2F-F-T

D2F-01F-D3

D2F-01-D3

D2F-F-D3

D2F-D3

D2F-01F-D

D2F-01-D

D2F-F-D

D2F-D

current

Standard 150 g

General-

purpose

Low force 75 g

Standard 150 g

D2F-F

D2F

D2F-T

D2F-A

D2F-A1

Hinge lever Microvoltage/ Low force 25 g

D2F-01FL

D2F-01L

D2F-FL

D2F-L

D2F-01FL-T

D2F-01L-T

D2F-FL-T

D2F-L-T

D2F-01FL-D3 D2F-01FL-D

D2F-01FL-A

D2F-01L-A

D2F-FL-A

D2F-L-A

D2F-01FL-A1

D2F-01L-A1

D2F-FL-A1

D2F-L-A1

current

Standard 80 g

D2F-01L-D3

D2F-FL-D3

D2F-L-D3

D2F-01L-D

D2F-FL-D

D2F-L-D

General-

purpose

Low force 25 g

Standard 80 g

Simulated

roller lever current

Microvoltage/ Low force 40 g

D2F-01FL3

D2F-01L3

D2F-FL3

D2F-L3

D2F-01FL2

D2F-01L2

D2F-FL2

D2F-L2

D2F-01FL3-T D2F-01FL3-D3 D2F-01FL3-D D2F-01FL3-A D2F-01FL3-A1

Standard 80 g

Low force 40 g

Standard 80 g

D2F-01L3-T

D2F-FL3-T

D2F-L3-T

D2F-01L3-D3 D2F-01L3-D

D2F-01L3-A

D2F-FL3-A

D2F-L3-A

D2F-01L3-A1

D2F-FL3-A1

D2F-L3-A1

General-

purpose

D2F-FL3-D3

D2F-L3-D3

D2F-FL3-D

D2F-L3-D

Roller lever Microvoltage/ Low force 40 g

D2F-01FL2-T D2F-01FL2-D3 D2F-01FL2-D D2F-01FL2-A D2F-01FL2-A1

current

Standard 80 g

D2F-01L2-T

D2F-FL2-T

D2F-L2-T

D2F-01L2-D3 D2F-01L2-D

D2F-01L2-A

D2F-FL2-A

D2F-L2-A

D2F-01L2-A1

D2F-FL2-A1

D2F-L2-A1

General-

purpose

Low force 40 g

Standard 80 g

D2F-FL2-D3

D2F-L2-D3

D2F-FL2-D

D2F-L2-D

Model Number Legend

D2F-

1 2 3 4

3. Actuator

None: Pin plunger

1. Ratings

4. Terminals

None: PCB terminals/straight terminals

None: General loads

Hinge lever

01:

Micro loads (0.1 A at 30 VDC)

-T:

Self-clinching PCB terminals

Right-angled PCB terminals

L2:

L3:

Hinge roller lever

Simulated roller lever

-A:

2. Maximum Operating Force

-A1: Left-angled PCB terminals

-D3: Solder terminals

None: 1.47 N {150 gf}

0.74 N {75 gf}

-D:

Compact solder terminals

Note: These OF values are for the pin plunger models.

Snap Action Switch D2F

Specifications

■ Characteristics

Operating speed

1 to 500 mm/second (pin plunger models)

Operating frequency

Mechanical: 200 operations per minute max.

Electrical: 30 operations per minute max.

Contact resistance

General Purpose: 30 mΩ max. (Standard force versions)

50 mΩ max. (Low force versions)

Microload:

100 mΩ max.

Insulation resistance

100 MΩ min. at 500 VDC

Dielectric strength (See note 2)

600 VAC, 50/60 Hz for 1 minute between terminals of same polarity

1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground, and between each

terminal and non-current-carrying metal parts

Vibration resistance (See note 3)

Shock resistance (See note 3)

Malfunction: 10 to 55 Hz, 1.5 mm double amplitude

Destruction: 1,000 m/s²(approx. 100G) max.

Malfunction: 300 m/s²(approx. 30 g min.) max.

IEC IP40

Degree of protection

Degree of protection against

electric shock

Class I

Proof tracking index (PTI)

175

Ambient operating temperature

Ambient operating Humidity

-25° to 65°C (at 60% RH) with no icing

85% max. (for 5° to 35°C)

Service life

Mechanical: 1 million operations min. at 60 operations/minute.

Electrical: 30,000 operations min. at 30 operations/minute.

Approx. 0.5 g (pin plunger models)

(Consult Omron for test conditions)

Weight

Note: 1. Data shown are of initial value.

2. The dielectric strength shown in the table indicates a value for models with a separator.

3. For pin plunger models, the values are measured at the free position and total travel position. For the lever models, they are measured

at the total travel position.

■ Ratings

Rated Voltage

Resistive load

Microvoltage/current (D2F-01 models)

General-purpose (D2F models)

Low force

—

Standard

—

Low force

1 A

Standard

125 VAC

30 VDC

3 A

2 A

0.1 A

0.5 A

Note: 1. When using an inductive load or motor load, consult OMRON.

2. The ratings apply under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.

■ Approvals

UL Recognized, CSA Certified

■ Contact Specifications

Item

D2F

D2F-01

Gold alloy

D2F

Specification

Material

Crossbar

Silver alloy

0.25 mm

D2F-01

Standard

Low Force

Rated voltage

125 VAC

Force

Gap

(Standard value)

3 A

- - -

30 VDC

2 A

0.5 A

0.1 A

Minimum Applicable Load

(See note)

100 mA at 5 VDC 1 mA at 5VDC

Note: The rated values approved by each of the safety standards

(e.g.UL,CSA) may be different from the performance character-

istics individually defined in this catalog.

Note: Minimum applicable loads are indicated by N standard

reference values. This value represents the failure rate at a

60% (λ₆₀) reliability level (JIS C5003).

The equation λ₆₀=0.5 x 10^-6/operations indicates that a failure

rate of 1/2,000,000 operations can be expected at a reliability

level of 60%.

Snap Action Switch D2F

Engineering Data

■ Mechanical Service Life

■ Electrical Service Life

D2F, D2F-01

D2F

10,000

Ambient temperature: 20° 2°C

Ambient humidity:

Without load

65 5% max.

Ambient temperature: 20° 2°C

7,000

5,000

300

Ambient humidity:

65 5% max.

Operating frequency: 60 operations/min

Without load

Operating frequency: 30 operations/min

3,000

100

125 VAC

1,000

700

30 VDC

500

300

100

Overtravel (mm)

Rated operating current (A)

Note: Values are for pin plunger actuator type.

■ Mounting

■ PCB Layout (reference)

All switches may be panel mounted using M2 mounting screws with

plane washers or spring washers to securely mount the switch.

Tighten the screws to a torque of 0.08 to 0.1 N·m.

Two , 2-dia. mounting holes

2.54

5.8 0.15

6.5 0.15

Three,

1.2 dia. holes

Use of molded components is recommended for mounting purposes

5.08 0.1

12.8 0.15

■ Structure

Contact Form (SPDT)

Snap Action Switch D2F

Dimensions

■ Terminals

Note: Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions

PCB terminals

Self-supporting terminals

D2F

D2F-T

1.5

3.4

1.5

3.5

1.6 0.15

1.5

3.15

0.4

6.5 0.1

3.15

6.5 0.1

5.08 5.08

12.8 0.15

0.9

0.4 0.05

0.9

5.08

12.8 0.15

5.08

1.25 0.15

5.8 0.15

Solder terminals

Compact solder terminals

D2F-D3

D2F-D

1.5

3.5

1.5

2.4

0.4

3.15

5.08

12.8 0.15

1.6

6.5 0.1

5.08

0.5

1.2

2.2

0.4

Three, 0.8-dia. holes

3.15

5.8 0.15

6.5 0.1

5.8 0.15

5.08

12.8 0.15

Right-angle PCB terminals

Left-angle PCB terminals

D2F-A

D2F-A1

1.5

2.6 0.2

0.4

2.6 0.2

3.15

0.9

5.8 0.15

6.5 0.1

0.4

5.8 0.15

5.08

3.1 0.2

12.8 0.15

(Top view)

Note: Angled terminal directions are shown below.

Left-angled terminal

Right-angled terminal

Snap Action Switch D2F

■ Dimensions and Operating Characteristics

Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions

2. Omitted dimensions are the same as pin plunger type.

3. The following illustrations and dimensions are for models with PCB terminals. Refer to “Terminals” for models with self-supporting, solder

and right / left angle terminal specifics.

4. The operating characteristics are for operation in the A direction(

)

Pin Plunger Models

12.7

D2F-@

D2F-F-@

1.2

D2F-

Characteristics

5.7

2.9

D2F-01-@

D2F-01F-@

2⁺₀^0.12

D2F-01-

2.2₀^+0.12

dia. holes

5.2

dia.

OF max.

RF min.

PT max.

OT min.

MD max.

150 g

20 g

75 g

5 g

D2F-F-

D2F-01F-

0.5 mm

0.25 mm

0.12 mm

5.5 ± 0.3 mm

—

0.5 mm

0.25 mm

0.12 mm

5.5 ± 0.3 mm

—

2⁺₀^0.12

1.5

3.5

0.4

5.8 0.15

0.9

6.5 0.1

3.15

FP max.

5.08

12.8 0.15

Hinge Lever Models

D2F-L-@

D2F-FL-@

12.8

D2F-L-

Characteristics

D2F-01L-@

D2F-01FL-@

D2F-01L-

D2F-FL-

D2F-01FL-

(10.8)

t = 0.3 (see note)

OF max.

RF min.

PT max.

OT min.

MD max.

80 g

5 g

25 g

2 g

—

0.55 mm

0.5 mm

6.8 ± 1.5 mm

10 mm

0.55 mm

0.5 mm

6.8 ± 1.5 mm

10 mm

FP max.

Note: Stainless-steel lever

Simulated Roller Lever Models

D2F-L3-@

D2F-FL3-@

D2F-L3-

12.7

(7.5)

Characteristics

D2F-01L3-@

D2F-01FL3-@

D2F-01L3-

D2F-FL3-

D2F-01FL3-

t = 0.3 (see note)

2.1

OF max.

RF min.

PT max.

OT min.

MD max.

80 g

5 g

40 g

2 g

1.3R

—

0.5 mm

0.45 mm

8.5 ± 1.2 mm

13 mm

0.5 mm

0.45 mm

8.5 ± 1.2 mm

13 mm

FP max.

Note: Stainless-steel lever

Hinge Roller Lever Models

12.8

D2F-L2-@

D2F-FL2-@

D2F-L2-

Characteristics

D2F-01L2-@

D2F-01FL2-@

4.8 dia. × 2.8 (Resin roller)

D2F-01L2-

D2F-FL2-

D2F-01FL2-

(10)

OF max.

RF min.

PT max.

OT min.

MD max.

80 g

5 g

40 g

2 g

(4.6)

t = 0.3

(see

note)

—

0.55 mm

0.5 mm

13 ± 2.0 mm

16.5 mm

0.55 mm

0.5 mm

13 ± 2.0 mm

16.5 mm

FP max.

Note: Stainless-steel lever

Snap Action Switch D2F

Precautions

Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,

“Snap Action Switches, Technical Information” for correct use.

■ Correct Use

■ Cautions

Mounting

Terminal Connection

Turn OFF the power supply before mounting or removing the switch,

wiring the switch, or performing maintenance or inspection. Failure to

do so may result in electric shock or burning.

When soldering a lead wire to the terminal, first insert the lead wire

conductor into the terminal hole and then perform soldering.

Make sure that the capacity of the soldering iron is 30 W maximum

and that the temperature of the soldering tip is approximately 300 °C.

(350 °C maximum.) Complete soldering within 3 s. After soldering,

do not apply external force to the soldered area for about 1 minute.

Mount the switch onto a flat surface. Mounting on an uneven surface

may cause deformation of the switch, resulting in faulty operation or

breakage of the housing.

Allow sufficient insulation distance between terminals, terminal

traces and between terminals and ground.

Using a switch with improper soldering may result in abnormal heat-

ing, possibly resulting in a burn.

Applying the soldering iron for more than 3 s or using an iron that is

rated for more than 30 W may deteriorate the switch characteristics.

Operating Stroke Setting

Take particular care in setting the operating stroke for the pin plunger

models. Make sure that the operating stroke is 70% to 100% of the

rated OT distance. Do not operate the actuator exceeding the OT

distance, otherwise the service life of the switch maybe decreased.

When soldering the lead wire to the PCB terminal, pay careful

attention so that the flux and solder liquid level does not exceed the

PCB level.

Using Microloads

Using a model for ordinary loads to switch microloads may result in

faulty operation. Instead, use the models that are designed for micro-

loads and that operate in the following range;

Operating

range for

general-load

models

Operating range

for micro load

models D2F-01

D2F

Inoperable

range

Current (mA)

However, even when using microload models within the operating

range shown above, if inrush current or inductive voltage spikes

occur when the contact is opened or closed, it may increase contact

wear and so decrease the service life. Therefore, insert a contact

protection circuit where necessary.

Snap Action Switch D2F

(b) Use in consumer Products or any use in significant quantities.

medical equipment, amusement machines, vehicles, safety equipment, and

installations subject to separate industry or government regulations.

(d) Systems, machines, and equipment that could present a risk to life or property.

3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING

SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE

PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE

WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED

VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY

SELLER.

5. Programmable Products: Seller shall not be responsible for the Buyer's programming of

a programmable Product.

Omron Electronic Components, LLC

Terms and Conditions of Sales

I. GENERAL

1. Definitions: The words used herein are defined as follows.

(a) Terms:

(b) Seller:

These terms and conditions

Omron Electronic Components LLC and its subsidiaries

The buyer of Products, including any end user in section III through VI

(d) Products: Products and/or services of Seller

(e) Including: Including without limitation

2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,

invoices, purchase orders and other documents, whether electronic or in writing, relating

to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's

purchase order or other documents which are inconsistent with, or in addition to, these

Terms.

3. Distributor: Any distributor shall inform its customer of the contents after and including

section III of these Terms.

IV. WARRANTY AND LIMITATION

1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in

materials and workmanship for a period of twelve months from the date of sale by Seller

(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY

OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE OF THE PRODUCTS.

2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form

originally shipped with Buyer responsible for labor charges for removal or replacement

thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an

amount equal to the purchase price of the Product; provided that there shall be no

liability for Seller or its affiliates unless Seller's analysis confirms that the Products were

correctly handled, stored, installed and maintained and not subject to contamination,

abuse, misuse or inappropriate modification. Return of any Products by Buyer must be

approved in writing by Seller before shipment.

3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED

WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,

WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL

LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF

THE PRODUCT ON WHICH LIABILITY IS ASSERTED.

4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its

employees from and against all liabilities, losses, claims, costs and expenses (including

attorney's fees and expenses) related to any claim, investigation, litigation or proceeding

(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or

omissions under these Terms or in any way with respect to the Products.

II. SALES

1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.

Buyer agrees to pay the price in effect at the time the purchase order is accepted by

Seller. Payments for Products received are due net 30 days unless otherwise stated in

the invoice. Buyer shall have no right to set off any amounts against the amount owing in

respect of this invoice.

2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to

Buyer after deducting transportation charges, taxes and duties, and will be allowed only

if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past

due amounts owing to Seller.

3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum

legal rate, whichever is less, on any balance not paid within the stated terms.

4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.

5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer

shall make remittance to Seller at the then current exchange rate most favorable to

Seller; provided that if remittance is not made when due, Buyer will convert the amount

to U.S. dollars at the then current exchange rate most favorable to Seller available

during the period between the due date and the date remittance is actually made.

6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining

any government approvals regarding the importation or sale of the Products.

7. Taxes: All taxes, duties and other governmental charges (other than general real

property and income taxes), including any interest or penalties thereon, imposed directly

or indirectly on Seller or required to be collected directly or indirectly by Seller for the

manufacture, production, sale, delivery, importation, consumption or use of the Products

sold hereunder (including customs duties and sales, excise, use, turnover and license

taxes) shall be charged to and remitted by Buyer to Seller.

V. INFORMATION; ETC.

1. Intellectual Property: The intellectual property embodied in the Products is the exclusive

property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way

without the written permission of Seller. Buyer (at its own expense) shall indemnify and

hold harmless Seller and defend or settle any action brought against Seller to the extent

that it is based on a claim that any Product made to Buyer specifications infringed

intellectual property rights of another party.

2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or

tooling, all engineering and tooling shall remain the exclusive property of Seller. All

information and materials supplied by Seller to Buyer relating to the Products are

confidential and proprietary, and Buyer shall limit distribution thereof to its trusted

employees and strictly prevent disclosure to any third party.

3. Performance Data: Performance data is provided as a guide in determining suitability

and does not constitute a warranty. It may represent the result of Seller's test conditions,

and the users must correlate it to actual application requirements.

4. Change In Specifications: Product specifications and descriptions may be changed at

any time based on improvements or other reasons. It is Seller’s practice to change part

numbers when published ratings or features are changed, or when significant

engineering changes are made. However, some specifications of the Product may be

changed without any notice.

8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,

Seller reserves the right to stop shipments or require satisfactory security or payment in

advance. If Buyer fails to make payment or otherwise comply with these Terms or any

related agreement, Seller may (without liability and in addition to other remedies) cancel

any unshipped portion of Products sold hereunder and stop any Products in transit until

Buyer pays all amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid

accounts.

9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer

indemnifies Seller fully against all costs or expenses arising in connection therewith.

10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from

causes beyond its control, including earthquakes, fires, floods, strikes or other labor

disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,

delay in or lack of transportation or the requirements of any government authority.

11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:

(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise

stated in writing by Seller), at which point title to and all risk of loss of the Products

shall pass from Seller to Buyer, provided that Seller shall retain a security interest in

the Products until the full purchase price is paid by Buyer;

5. Errors And Omissions: The information on Seller’s website or in other documentation

has been carefully checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses

regarding (a) export of the Products or information provided by Seller; (b) sale of

Products to forbidden or other proscribed persons or organizations; (c) disclosure to non-

citizens of regulated technology or information.

(b) Delivery and shipping dates are estimates only; and

handling and extra charges apply to special conditions.

12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products

occurring before delivery to the carrier or any claim related to pricing or other charges

must be presented in detail in writing to Seller within 30 days of receipt of shipment.

III. PRECAUTIONS

VI. MISCELLANEOUS

1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY

OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE

APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING

APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE

BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC

COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)

SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.

Buyer acknowledges that it alone has determined that the Products will meet their

requirements of the intended use in all cases. Buyer must know and observe all

prohibitions of use applicable to the Product/s.

1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing

between Buyer and Seller shall operate as a waiver of rights by Seller.

2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.

3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).

Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any

dispute hereunder.

4. Amendment: These Terms constitute the entire agreement between Buyer and Seller

relating to the Products, and no provision may be changed or waived unless in writing

signed by the parties.

5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall

not invalidate any other provision.

2. Use with Attention: The followings are some examples of applications for which

particular attention must be given. This is not intended to be an exhaustive list of all

possible use of any Product, nor to imply that any use listed may be suitable for any

Product:

(a) Outdoor use, use involving potential chemical contamination or electrical

interference.

Snap Action Switch D2F

Certain Precautions on Specifications and Use

1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro-

dards, codes or regulations which apply to the combination of the Product in

gramming of a programmable product, or any consequence thereof.

Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as

vide applicable third party certification documents identifying ratings and limi-

tations of use which apply to the Product. This information by itself is not

sufficient for a complete determination of the suitability of the Product in com-

bination with the end product, machine, system, or other application or use.

a guide for the user in determining suitability and does not constitute a war-

ranty. It may represent the result of Seller's test conditions, and the users must

correlate it to actual application requirements. Actual performance is subject to

Seller's Warranty and Limitations of Liability.

Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be

ticular Product with respect to Buyer's application, product or system. Buyer

shall take application responsibility in all cases but the following is a non-

exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to separate industry or government

regulations.

(iii) Use in consumer products or any use in significant quantities.

(iv) Systems, machines and equipment that could present a risk to life or

property. Please know and observe all prohibitions of use applicable to this

product.

changed at any time based on improvements and other reasons. It is our prac-

tice to change part numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your Seller representative at any time to

confirm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefully

checked and is believed to be accurate; however, no responsibility is assumed

for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance. Where indicated, our products currently comply, to the

best of our knowledge as of the date of this publication, with the requirements

of the European Union's Directive on the Restriction of certain Hazardous

Substances ("RoHS"), although the requirements of RoHS do not take effect

until July 2006. These requirements may be subject to change. Please consult

our website for current information.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT

THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE

INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

11/09

Specifications subject to change without notice

Printed in USA

Cat. No. X303-E-1

Snap Action Switch D2F

D2F-FL-A [OMRON]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E