D3V-014-2A3 [OMRON]
Snap Acting/Limit Switch, SPST, Momentary, 0.1A, 8VDC, 5.6mm, Quick Connect Terminal, Simulated Roller Lever Actuator, Panel Mount, ROHS COMPLIANT;
| 型号： | D3V-014-2A3 |
| 厂家： | 
OMRON ELECTRONICS LLC |
| 描述： | Snap Acting/Limit Switch, SPST, Momentary, 0.1A, 8VDC, 5.6mm, Quick Connect Terminal, Simulated Roller Lever Actuator, Panel Mount, ROHS COMPLIANT 开关 |
| 文件： | 总14页 (文件大小：1178K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Miniature Basic Switch
D3V
Reliable Basic Switch with External Lever
• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with
self-cleaning contacts. 0.1 A utilizes gold alloy crossbar
contacts for high reliability at low loads.
• Available with internally or externally fitted levers, and 2 fix-
ing positions for external levers.
• Conforms to EN61058-1 UL1054.
• Right-angle plunger option available in some models.
• RoHS Compliant.
Ordering Information
■ Model Number Legend
D3V-@@@@-@@@-@-@
1 2 3 4 5 6 7
8
9
1. Ratings
6. Terminals
21: 20 (4) A at 250 VAC
16: 16 (3) A at 250 VAC
11: 11 (3) A at 250 VAC
A:
Solder/quick-connect terminal (#187)
C2: Quick-connect terminal (#187)
C:
Quick-connect terminal (#250)
(optional without surge creepage tab flush around
terminals.)
6:
6 (2) A at 250 VAC
01: 0.1 A at 125 VAC
2. Contact Gap
7. Maximum Operating Force
5: 1.96 N {200 gf}
4A: 1.23 N {125 gf}
None: 1 mm (F gap)
G:
3. Actuator
None: Pin plunger
0.5 mm (G gap)
4:
3:
2:
0.98 N {100 gf}
0.49 N {50 gf}
0.25 N {25 gf}
1:
2:
3:
4:
5:
6:
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
Note: These values are for the plunger models.
8. Mounting Hole Size
None: 3.1 mm
K:
9. Special Code
2.9 mm
None: Standard
4. Hinge Position
None: Internal/Far from plunger
H:
E:
T:
High temperature (125°C)
Special rating: 21 (8) A
High temperature (200° C)
M:
K:
External/Far from plunger
External/Near plunger
5. Contact Form
1:
2:
3:
SPDT
SPST-NC
SPST-NO
Miniature Basic Switch D3V
1
■ Available Combinations
Model D3V-21
D3V-16
D3V-11
11 A
D3V-6
6 A
D3V-01
0.1 A
Rated current
21 A
16 A
OF 1.23 N
{125 gf}
1.96 N
{200 gf}
0.98 N
{100 gf}
1.96 N
{200 gf}
0.98 N
{100 gf}
0.49 N
1.96 N
0.98 N
{100 gf}
0.49 N 0.49 N 0.25 N
{50 gf} {50 gf} {25 gf}
{50 gf} {200 gf}
Heat resis-
tance
Contact
G
F
G
F/G
F
G
F
G
0.5
mm
G
F/G
F
G
0.5
mm
G
F
F
gap 0.5 mm 1 mm 0.5 mm 1 mm or 1 mm 0.5 mm 1 mm
0.5 mm
0.5 mm 1 mm or 1 mm
0.5 mm
0.5 mm 1 mm 1 mm
Terminals
#187
Standard
(85° C)
●
●
#250
●
❍
❍
Standard
#187
●
●
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
●
●
❍
❍
❍
❍
❍
❍
●
●
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
●
●
❍
❍
❍
❍
❍
●
●
❍
❍
❍
❍
(105° C)
#250
❍
❍
❍
❍
❍
❍
❍
❍
High tem- #187
perature
(125° C)
#250
High tem- #187
perature
(200° C)
❍
❍
❍
❍
#250
Note: 1. ●: Standard
❍: Semi-standard
2. Consult OMRON for specific models with standard approval.
■ List of Models
21 A (OF: 1.23 N {125 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-21G-1@4A-∆
D3V-21G-2@4A-∆
D3V-21G-3@4A-∆
Plunger
Internal
D3V-21G1-1@4A-∆
D3V-21G1M-1@4A-∆
D3V-21G2-1@4A-∆
D3V-21G2M-1@4A-∆
D3V-21G3-1@4A-∆
D3V-21G3M-1@4A-∆
D3V-21G4-1@4A-∆
D3V-21G4M-1@4A-∆
D3V-21G5-1@4A-∆
D3V-21G5M-1@4A-∆
D3V-21G1-2@4A-∆
D3V-21G1M-2@4A-∆
D3V-21G2-2@4A-∆
D3V-21G2M-2@4A-∆
D3V-21G3-2@4A-∆
D3V-21G3M-2@4A-∆
D3V-21G4-2@4A-∆
D3V-21G4M-2@4A-∆
D3V-21G5-2@4A-∆
D3V-21G5M-2@4A-∆
D3V-21G1-3@4A-∆
D3V-21G1M-3@4A-∆
D3V-21G2-3@4A-∆
D3V-21G2M-3@4A-∆
D3V-21G3-3@4A-∆
D3V-21G3M-3@4A-∆
D3V-21G4-3@4A-∆
D3V-21G4M-3@4A-∆
D3V-21G5-3@4A-∆
D3V-21G5M-3@4A-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-21G6-1@4A-∆
D3V-21G6M-1@4A-∆
D3V-21G6-2@4A-∆
D3V-21G6M-2@4A-∆
D3V-21G6-3@4A-∆
D3V-21G6M-3@4A-∆
Hinge roller lever
External (M)
16 A (OF: 1.96 N {200 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-16-1@5-∆
D3V-16-2@5-∆
D3V-16-3@5-∆
Plunger
Internal
D3V-161-1@5-∆
D3V-161-2@5-∆
D3V-161-3@5-∆
Short hinge lever
External (M)
D3V-161M-1@5-∆
D3V-161M-2@5-∆
D3V-161M-3@5-∆
2
Miniature Basic Switch D3V
Actuator
Hinge position
Contact form
SPST-NC
(far from plunger)
SPDT
D3V-162-1@5-∆
D3V-162M-1@5-∆
D3V-163-1@5-∆
D3V-163M-1@5-∆
D3V-164-1@5-∆
D3V-164M-1@5-∆
D3V-165-1@5-∆
D3V-165M-1@5-∆
SPST-NO
D3V-162-3@5-∆
D3V-162M-3@5-∆
D3V-163-3@5-∆
D3V-163M-3@5-∆
D3V-164-3@5-∆
D3V-164M-3@5-∆
D3V-165-3@5-∆
D3V-165M-3@5-∆
Internal
D3V-162-2@5-∆
Hinge lever
External (M)
Internal
D3V-162M-2@5-∆
D3V-163-2@5-∆
D3V-163M-2@5-∆
D3V-164-2@5-∆
D3V-164M-2@5-∆
D3V-165-2@5-∆
D3V-165M-2@5-∆
Long hinge lever
External (M)
Internal
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
D3V-166-1@5-∆
D3V-166-2@5-∆
D3V-166-3@5-∆
Hinge roller lever
External (M)
D3V-166M-1@5-∆
D3V-166M-2@5-∆
D3V-166M-3@5-∆
16 A (OF: 0.98 N {100 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-16-1@4-∆
D3V-16-2@4-∆
D3V-16-3@4-∆
Plunger
Internal
D3V-161-1@4-∆
D3V-161M-1@4-∆
D3V-162-1@4-∆
D3V-162M-1@4-∆
D3V-163-1@4-∆
D3V-163M-1@4-∆
D3V-164-1@4-∆
D3V-164M-1@4-∆
D3V-165-1@4-∆
D3V-165M-1@4-∆
D3V-161-2@4-∆
D3V-161M-2@4-∆
D3V-162-2@4-∆
D3V-162M-2@4-∆
D3V-163-2@4-∆
D3V-163M-2@4-∆
D3V-164-2@4-∆
D3V-164M-2@4-∆
D3V-165-2@4-∆
D3V-165M-2@4-∆
D3V-161-3@4-∆
D3V-161M-3@4-∆
D3V-162-3@4-∆
D3V-162M-3@4-∆
D3V-163-3@4-∆
D3V-163M-3@4-∆
D3V-164-3@4-∆
D3V-164M-3@4-∆
D3V-165-3@4-∆
D3V-165M-3@4-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-166-1@4-∆
D3V-166-2@4-∆
D3V-166-3@4-∆
Hinge roller lever
External (M)
D3V-166M-1@4-∆
D3V-166M-2@4-∆
D3V-166M-3@4-∆
11 A (OF: 1.96 N {200 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-11-1@5-∆
D3V-11-2@5-∆
D3V-11-3@5-∆
Plunger
Internal
D3V-111-1@5-∆
D3V-111M-1@5-∆
D3V-112-1@5-∆
D3V-112M-1@5-∆
D3V-113-1@5-∆
D3V-113M-1@5-∆
D3V-114-1@5-∆
D3V-114M-1@5-∆
D3V-115-1@5-∆
D3V-115M-1@5-∆
D3V-111-2@5-∆
D3V-111M-2@5-∆
D3V-112-2@5-∆
D3V-112M-2@5-∆
D3V-113-2@5-∆
D3V-113M-2@5-∆
D3V-114-2@5-∆
D3V-114M-2@5-∆
D3V-115-2@5-∆
D3V-115M-2@5-∆
D3V-111-3@5-∆
D3V-111M-3@5-∆
D3V-112-3@5-∆
D3V-112M-3@5-∆
D3V-113-3@5-∆
D3V-113M-3@5-∆
D3V-114-3@5-∆
D3V-114M-3@5-∆
D3V-115-3@5-∆
D3V-115M-3@5-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-116-1@5-∆
D3V-116-2@5-∆
D3V-116-3@5-∆
Hinge roller lever
External (M)
D3V-116M-1@5-∆
D3V-116M-2@5-∆
D3V-116M-3@5-∆
Note: The @ in the model number is for the terminal code.
A:
C2:
C:
Solder/quick-connect terminals (#187)
Quick-connect terminals (#187)
Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
Miniature Basic Switch D3V
3
11 A (OF: 0.98 N {100 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
D3V-11-3@4-∆
---
D3V-11-1@4-∆
D3V-11-2@4-∆
Plunger
Internal
D3V-111-1@4-∆
D3V-111M-1@4-∆
D3V-112-1@4-∆
D3V-112M-1@4-∆
D3V-113-1@4-∆
D3V-113M-1@4-∆
D3V-114-1@4-∆
D3V-114M-1@4-∆
D3V-115-1@4-∆
D3V-115M-1@4-∆
D3V-111-2@4-∆
D3V-111M-2@4-∆
D3V-112-2@4-∆
D3V-112M-2@4-∆
D3V-113-2@4-∆
D3V-113M-2@4-∆
D3V-114-2@4-∆
D3V-114M-2@4-∆
D3V-115-2@4-∆
D3V-115M-2@4-∆
D3V-111-3@4-∆
D3V-111M-3@4-∆
D3V-112-3@4-∆
D3V-112M-3@4-∆
D3V-113-3@4-∆
D3V-113M-3@4-∆
D3V-114-3@4-∆
D3V-114M-3@4-∆
D3V-115-3@4-∆
D3V-115M-3@4-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-116-1@4-∆
D3V-116-2@4-∆
D3V-116-3@4-∆
Hinge roller lever
External (M)
D3V-116M-1@4-∆
D3V-116M-2@4-∆
D3V-116M-3@4-∆
11 A (OF: 0.49 N {50 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-11G-1@3-∆
D3V-11G-2@4-∆
D3V-11G-3@3-∆
Plunger
Internal
D3V-11G1-1@3-∆
D3V-11G1M-1@3-∆
D3V-11G2-1@3-∆
D3V-11G2M-1@3-∆
D3V-11G3-1@3-∆
D3V-11G3M-1@3-∆
D3V-11G4-1@3-∆
D3V-11G4M-1@3-∆
D3V-11G5-1@3-∆
D3V-11G5M-1@3-∆
D3V-11G1-2@4-∆
D3V-11G1M-2@3-∆
D3V-11G2-2@3-∆
D3V-11G2M-2@3-∆
D3V-11G3-2@3-∆
D3V-11G3M-2@3-∆
D3V-11G4-2@3-∆
D3V-11G4M-2@3-∆
D3V-11G5-2@3-∆
D3V-11G5M-2@3-∆
D3V-11G1-3@3-∆
D3V-11G1M-3@3-∆
D3V-11G2-3@3-∆
D3V-11G2M-3@3-∆
D3V-11G3-3@3-∆
D3V-11G3M-3@3-∆
D3V-11G4-3@3-∆
D3V-11G4M-3@3-∆
D3V-11G5-3@3-∆
D3V-11G5M-3@3-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-11G6-1@3-∆
D3V-11G6-2@3-∆
D3V-11G6-3@3-∆
Hinge roller lever
External (M)
D3V-11G6M-1@3-∆
D3V-11G6M-2@3-∆
D3V-11G6M-3@3-∆
6 A (OF: 0.98 N {100 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-6-1@4-∆
D3V-6-2@4-∆
D3V-6-3@4-∆
Plunger
Internal
D3V-61-1@4-∆
D3V-61M-1@4-∆
D3V-62-1@4-∆
D3V-62M-1@4-∆
D3V-63-1@4-∆
D3V-63M-1@4-∆
D3V-64-1@4-∆
D3V-64M-1@4-∆
D3V-65-1@4-∆
D3V-65M-1@4-∆
D3V-61-2@4-∆
D3V-61M-2@4-∆
D3V-62-2@4−∆
D3V-62M-2@4-∆
D3V-63-2@4-∆
D3V-63M-2@4-∆
D3V-64-2@4-∆
D3V-64M-2@4-∆
D3V-65-2@4-∆
D3V-65M-2@4-∆
D3V-61-3@4-∆
D3V-61M-3@4-∆
D3V-62-3@4-∆
D3V-62M-3@4-∆
D3V-63-3@4-∆
D3V-63M-3@4-∆
D3V-64-3@4-∆
D3V-64M-3@4-∆
D3V-65-3@4-∆
D3V-65M-3@4-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-66-1@4-∆
D3V-66-2@4-∆
D3V-66-3@4-∆
Hinge roller lever
External (M)
D3V-66M-1@4-∆
D3V-66M-2@4-∆
D3V-66M-3@4-∆
Note: The @ in the model number is for the terminal code.
The ∆ in the model number is for the mounting hole size.
A:
Solder/quick-connect terminals (#187)
Quick-connect terminals (#187)
Quick-connect terminals (#250)
None: 3.1 mm
C2:
C:
K:
2.9 mm
4
Miniature Basic Switch D3V
6 A (OF: 0.49 N {50 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
D3V-6G-3@3-∆
---
D3V-6G-1@3-∆
D3V-6G-2@3-∆
Plunger
Internal
D3V-6G1-1@3-∆
D3V-6G1M-1@3-∆
D3V-6G2-1@3-∆
D3V-6G2M-1@3-∆
D3V-6G3-1@3-∆
D3V-6G3M-1@3-∆
D3V-6G4-1@3-∆
D3V-6G4M-1@3-∆
D3V-6G5-1@3-∆
D3V-6G5M-1@3-∆
D3V-6G1-2@3-∆
D3V-6G1M-2@3-∆
D3V-6G2-2@3-∆
D3V-6G2M-2@3-∆
D3V-6G3-2@3-∆
D3V-6G3M-2@3-∆
D3V-6G4-2@3-∆
D3V-6G4M-2@3-∆
D3V-6G5-2@3-∆
D3V-6G5M-2@3-∆
D3V-6G1-3@3-∆
D3V-6G1M-3@3-∆
D3V-6G2-3@3-∆
D3V-6G2M-3@3-∆
D3V-6G3-3@3-∆
D3V-6G3M-3@3-∆
D3V-6G4-3@3-∆
D3V-6G4M-3@3-∆
D3V-6G5-3@3-∆
D3V-6G5M-3@3-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-6G6-1@3-∆
D3V-6G6-2@3-∆
D3V-6G6-3@3-∆
Hinge roller lever
External (M)
D3V-6G6M-1@3-∆
D3V-6G6M-2@3-∆
D3V-6G6M-3@3-∆
01 A (OF: 0.49 N {50 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-01-1@3-∆
D3V-01-2@3-∆
D3V-01-3@3-∆
Plunger
Internal
D3V-011-1@3-∆
D3V-011M-1@3-∆
D3V-012-1@3-∆
D3V-012M-1@3-∆
D3V-013-1@3-∆
D3V-013M-1@3-∆
D3V-014-1@3-∆
D3V-014M-1@3-∆
D3V-015-1@3-∆
D3V-015M-1@3-∆
D3V-011-2@3-∆
D3V-011M-2@3-∆
D3V-012-2@3-∆
D3V-012M-2@3-∆
D3V-013-2@3-∆
D3V-013M-2@3-∆
D3V-014-2@3-∆
D3V-014M-2@3-∆
D3V-015-2@3-∆
D3V-015M-2@3-∆
D3V-011-3@3-∆
D3V-011M-3@3-∆
D3V-012-3@3-∆
D3V-012M-3@3-∆
D3V-013-3@3-∆
D3V-013M-3@3-∆
D3V-014-3@3-∆
D3V-014M-3@3-∆
D3V-015-3@3-∆
D3V-015M-3@3-∆
Short hinge lever
External (M)
Internal
Hinge lever
External (M)
Internal
Long hinge lever
Simulated roller lever
Short hinge roller lever
External (M)
Internal
External (M)
Internal
External (M)
Internal
D3V-016-1@3-∆
D3V-016-2@3-∆
D3V-016-3@3-∆
Hinge roller lever
External (M)
D3V-016M-1@3-∆
D3V-016M-2@3-∆
D3V-016M-3@3-∆
01 A (OF: 0.25 N {25 gf})
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
SPDT
SPST-NO
---
D3V-01-1@2-∆
D3V-01-2@2-∆
D3V-01-3@2-∆
Plunger
Note: The @ in the model number is for the terminal code.
A:
C2:
C:
Solder/quick-connect terminals (#187)
Quick-connect terminals (#187)
Quick-connect terminals (#250)
The ∆ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
Miniature Basic Switch D3V
5
Specifications
■ Ratings
Type
Rated voltage
Non-inductive load
Resistive load Lamp load
NC NO NC NO
Inductive load
Inductive load
NC NO
Motor load
NC NO
D3V-21
250 VAC
21 A
21 A
14 A
0.6 A
0.3 A
16 A
3 A
5 A
5 A
0.1 A
0.05 A
2 A
12 A
12 A
12 A
0.6 A
0.3 A
10 A
4 A
7 A
5 A
0.1 A
0.05 A
3 A
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
D3V-16
D3V-11
D3V-6
8 VDC
16 A
10 A
0.6 A
0.3 A
4 A
4 A
0.1 A
0.05 A
10 A
10 A
0.6 A
0.3 A
6 A
4 A
0.1 A
0.05 A
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
11 A
11 A
6 A
0.6 A
0.3 A
6 A
1.5 A
3 A
3 A
0.1 A
0.05 A
3 A
6 A
2 A
6 A
6 A
0.6 A
0.3 A
4 A
3 A
3 A
0.1 A
0.05 A
---
8 VDC
6 A
3 A
4 A
---
30 VDC
125 VDC
250 VDC
6 A
0.4 A
0.3 A
3 A
0.1 A
0.05 A
4 A
0.4 A
0.2 A
D3V-01
125 VAC
8 VDC
30 VDC
0.1 A
0.1 A
0.1 A
---
---
---
---
---
---
Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current
values of models with a contact gap of 0.5 mm (gap G).
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The ratings values apply under the following test conditions:
Ambient temperature: 20 2°C
Ambient humidity: 65 5%
Operating frequency: 30 operations/min
6
Miniature Basic Switch D3V
■ Characteristics
Operating speed
0.1 mm to 1 m/s (plunger models without levers)
Operating frequency
Mechanical: 600 operations/min
Electrical: 60 operations/min
Insulation resistance
100 MΩmin. (at 500 VDC)
Contact resistance (initial values)
D3V-21: 50 mΩ max.
D3V-16, D3V-11, D3V-6: 30 mΩ max.
D3V-01,
0.49 N {50 gf}:
0.25 N {25 gf}:
50 mΩ max.
100 mΩ max.
Dielectric strength (see note 1)
1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each
terminal and non-current-carrying metal parts
Vibration resistance (see note 2)
Shock resistance (see note 2)
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 400 m/s2 {approx. 40G} max.
Malfunction: 100 m/s2 {approx. 10G} max.
Durability (see note 3)
Mechanical: 10,000,000 operations min.
Electrical:
D3V-21:
D3V-16:
D3V-11:
50,000 operations min.
100,000 operations min.
200,000 operations min.
D3V-6, D3V-01: 500,000 operations min.
Degree of protection
IEC IP00
Class I
Degree of protection against electric
shock
Proof tracking index (PTI)
250
Ambient operating temperature
D3V-21, D3V-01:
D3V-16, D3V-11, D3V-6: –25°C to 105°C (with no icing)
–25°C to 85°C (with no icing)
Ambient operating humidity
Weight
85% max. (for 5°C to 35°C)
Approx. 6.2 g (plunger models without levers)
Note: 1. The dielectric strength values shown in the table are for models with a Separator.
2. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the
total travel position.
3. For testing conditions, contact your OMRON sales representative.
■ Approved Standards
UL1054 (File No. E41515) CSA C22.2 No.55 (File No. LR21642)
(Only standard ratings are listed.)
Rated voltage
D3V-21G
D3V-16
D3V-16G
D3V-11
D3V-11G
D3V-6
D3V-6G
D3V-01
0.1 A
125 VAC
21 A, 1/2 HP 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP
(See note.)
6 A, 1/4 HP
250 VAC
21 A, 1/2 HP 16 A, 1/2 HP 16 A, 1/2 HP 11 A, 1/2 HP 11 A, 1/2 HP 6 A, 1/4 HP
(See note.)
6 A, 1/4 HP
---
125 VDC
250 VDC
---
---
0.6 A
0.3 A
0.1 A
---
0.6 A
0.3 A
0.1 A
---
---
---
---
---
---
---
Note: Approval projected.
EN 61058-1: 1992+A1: 1993 (License No. 119151L)
Rated voltage
125 VAC
D3V-21G
D3V-16
D3V-11
D3V-6
D3V-01
0.1 A
---
---
20 (4) A
---
16 (3) A
---
11 (3) A
---
6 (2) A
250 VAC
Testing conditions: 50,000 operations, T85 (0°C to 85° C) for D3V-21/D3V-01, T105 (0° C to 105°C) for D3V-16/D3V-11/D3V-6
Rated voltage
D3V-21G
21 (8) A
250 VAC
Testing conditions: 10,000 operations, T85 (0°C to 85° C)
Miniature Basic Switch D3V
7
■ Contact Specifications
Item
D3V-21
Rivet
D3V-16
D3V-11
D3V-6
D3V-01
Crossbar
Contact
Specification
Material
Silver alloy
0.5 mm
Gold alloy
1.0 mm
Gap
(standard value)
1 mm (F gap type) or 0.5 mm (G gap type)
40 A max. 24 A max. 15 A max.
Inrush current
NC
NO
50 A max.
---
Minimum applicable load
160 mA at 5 VDC
1 mA at 5 VDC
■ Contact Form
SPDT
SPST-NC
SPST-NO
NC
NC
NO
NO
COM
COM
COM
Dimensions
Unit: mm (inch)
■ Terminals
Terminal type
Solder/Quick-connect Terminal
Quick-connect Terminal
(#187) (C2)
Quick-connect Terminal
(#250) (C)
(#187) (A)
COM
(4.9)
(7.7)
(5.5)
(6.5)
(5.5)
(6.5)
2.9
2.9
3.2
(10)
(12.0)
(10)
t = 0.5
t = 0.5
Three, solder/quick-connect
terminals (#187)
Three, quick-connect
terminals (#187)
t = 0.8
Three, quick-connect
terminals (#250)
8
Terminal
dimensions
6.35
3.2 (see note)
6.35
3.2
3.95
4.75 0.1
4.75 0.1
1.6 dia.
6.35 0.1
1.6-dia. terminal hole
2.4 dia.
Note: Indicates the length to the center of the
1.65-dia. terminal hole
1.6-dia. holes
Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For
terminal positions, refer to the above Contact Form.
■ Mounting Holes
Two, 3.1-dia. mounting holes or
M3 screw holes
10.3 0.1
22.2 0.1
8
Miniature Basic Switch D3V
■ Dimensions and Operating Characteristics
Note: 1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
3. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models incorporate terminals A and
C. These models are different from #187 models in terminal size only. Terminals A and C are omitted from the following drawings. Refer
to Terminals on page 8 for these terminals.
4. The following illustrations and drawings are for models with the hinge position set to external/further than plunger. Models with the hinge
position set to internal position are not shown here. For details about the internal position models, contact your OMRON sales represen-
tative. Operating characteristics are the same for these two types of models.
5. The @ in the model number is for the terminal code.
6. The ∆ in the model number is for the mounting hole size.
The hole size in the following illustrations of models with a suffix “K” in the ∆ is 2.9 mm.
7. The operating characteristics are for operation in the A direction (
).
Plunger Models
D3V-21G-1ꢀ4-∆
D3V-16-1ꢀ5-∆
D3V-11-1ꢀ5-∆
D3V-11-1ꢀ4-∆
D3V-6-1ꢀ4-∆
A
D3V-6G-1ꢀ3-∆
D3V-01-1ꢀ2-∆
D3V-01-1ꢀ3-∆
t=0.5
Three, quick-connect
terminals (#187)
Model
OF max.
D3V-21G-1@4A-∆
D3V-16-1@5-∆
D3V-11-1@5-∆
200 g {1.96 N}
50 g {0.49 N}
1.2 mm
D3V-11-1@4-∆
D3V-6-1@4-∆
100 g {0.98 N}
15 g {0.15 N}
D3V-6G-1@3-∆
D3V-01-1@3-∆
D3V-01-1@2-∆
125 g {1.23 N}
20 g {0.20 N}
50 g {0.49 N}
5 g {0.05 N}
50 g {0.49 N}
5 g {0.05 N}
25 g {0.25 N}
3 g {0.03 N}
RF min.
PT max.
OT min.
MD max.
1.2 mm
1.0 mm
0.3 mm
1.2 mm
1.0 mm
0.4 mm
1.0 mm
0.4 mm (F gap type) or 0.3 mm (G gap type)
OP
14.7 0.4 mm
Short Hinge Lever Models
D3V-21GM-1ꢀ4A-∆
D3V-161M-1ꢀ5-∆
D3V-111M-1ꢀ5-∆
D3V-111M-1ꢀ4-∆
D3V-61M-1ꢀ4-∆
D3V-6G1M-1ꢀ3-∆
D3V-01-1ꢀ2-∆
A
D3V-01M1-1ꢀ3-∆
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever.
Model
D3V-21G1M-1@4A-∆
D3V-161M-1@5-∆
D3V-111M-1@4-∆
D3V-61M-1@4-∆
100 g {0.98 N}
15 g {0.15 N}
D3V-6G1M-1@3-∆
D3V-011M-1@3-∆
D3V-111M-1@5-∆
200 g {1.96 N}
50 g {0.49 N}
1.6 mm
OF max.
125 g {1.23 N}
20 g {0.20 N}
1.6 mm
0.8 mm
0.5 mm
50 g {0.49 N}
5 g {0.05 N}
RF min.
PT max.
OT min.
MD max.
OP
1.6 mm
0.8 mm
0.6 mm
0.8 mm
0.6 mm (F gap type) or 0.5 mm (G gap type)
15.2 0.5 mm
Miniature Basic Switch D3V
9
Hinge Lever Models
D3V-21G2M-1ꢀ4A-∆
D3V-162M-1ꢀ5-∆
D3V-112M-1ꢀ5-∆
D3V-112M-1ꢀ4-∆
D3V-62M-1ꢀ4-∆
D3V-6G2M-1ꢀ3-∆
D3V-012M-1ꢀ3-∆
A
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever.
l
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
D3V-21G2M-1@4A-∆
D3V-162M-1@5-∆
D3V-112M-1@5-∆
125 g {1.23 N}
14 g {0.14 N}
4.0 mm
D3V-112M-1@4-∆
D3V-62M-1@4−∆
60 g {0.59 N}
6 g {0.06 N}
D3V-6G2M-1@3-∆
D3V-012M-1@3-∆
80 g {0.78 N}
6 g {0.06 N}
4.0 mm
1.6 mm
0.8 mm
30 g {0.29 N}
---
4.0 mm
1.6 mm
1.5 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
15.2 1.2 mm
Long Hinge Lever Models
D3V-21G3M-1ꢀ4A-∆
D3V-163M-1ꢀ5-∆
D3V-113M-1ꢀ5-∆
D3V-113M-1ꢀ4-∆
D3V-63M-1ꢀ4-∆
D3V-6G3M-1ꢀ3-∆
D3V-013M-1ꢀ3-∆
A
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever.
Model
D3V-21G3M-1@4A-∆ D3V-163M-1@5-∆
D3V-113M-1@4-∆
D3V-6G3M-1@3-∆ D3V-013M-1@3-∆
D3V-113M-1@5-∆
70 g {0.69 N}
6 g {0.06 N}
9.0 mm
D3V-63M-1@4-∆
35 g {0.34 N}
---
OF max.
RF min.
45 g {0.44 N}
3 g {0.03 N}
20 g {0.20 N}
---
PT max.
OT min.
MD max.
9.0 mm
2.0 mm
2.0 mm
9.0 mm
3.2 mm
9.0 mm
3.2 mm
2.8 mm
2.0 mm
2.8 mm (F gap type) or 2.0 mm (G gap type) 2.8 mm (F gap type) or 2.0 mm (G gap
type)
OP
15.2 2.6 mm
+2.6
15.2
mm
−3.2
10
Miniature Basic Switch D3V
Simulated Roller Lever Models
D3V-21G3M-1ꢀ4A-∆
D3V-164M-1ꢀ5-∆
D3V-114M-1ꢀ5-∆
D3V-114M-1ꢀ4-∆
D3V-64M-1ꢀ4-∆
D3V-6G4M-1ꢀ3-∆
D3V-014M-1ꢀ3-∆
A
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever.
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
D3V-21G4M-1@4A-∆
D3V-164M-1@5-∆
D3V-114M-1@5-∆
125 g {1.23 N}
14 g {0.14 N}
4.0 mm
D3V-114M-1@4-∆
D3V-64M-1@4-∆
60 g {0.59 N}
6 g {0.06 N}
D3V-6G4M-1@3-∆
D3V-014M-1@3-∆
85 g {0.83 N}
7 g {0.07 N}
4.0 mm
1.6 mm
1.4 mm
30 g {0.29 N}
---
4.0 mm
1.6 mm
1.5 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
18.7 1.2 mm
Short Hinge Roller Lever Models
D3V-21G5M-1ꢀ4A-∆
D3V-165M-1ꢀ5-∆
D3V-115M-1ꢀ5-∆
D3V-115M-1ꢀ4-∆
D3V-65M-1ꢀ4-∆
D3V-6G5M-1ꢀ3-∆
D3V-015M-1ꢀ3-∆
A
t=0.5
Three, quick-connect
terminals (#187)
Note: 1. Stainless-steel lever.
2. Oilless polyacetal resin roller.
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
D3V-21G5M-1@4A-∆
D3V-165M-1@5-∆
D3V-115M-1@5-∆
240 g {2.35 N}
50 g {0.49 N}
1.6 mm
D3V-115M-1@4-∆
D3V-6G5M-1@3-∆
D3V-015M-1@3-∆
D3V-65M-1@4-∆
120 g {1.18 N}
15 g {0.15 N}
145 g {1.42 N}
20 g {0.2 N}
1.6 mm
0.8 mm
0.5 mm
60 g {0.59 N}
6 g {0.06 N}
1.6 mm
0.8 mm
0.6 mm
0.8 mm
0.6 mm (F gap type) or 0.5 mm (G gap type)
20.7 0.6 mm
Miniature Basic Switch D3V
11
Hinge Roller Lever Models
A
D3V-21G6M-1ꢀ4A-∆
D3V-166M-1ꢀ5-∆
D3V-116M-1ꢀ5-∆
D3V-116M-1ꢀ4-∆
D3V-66M-1ꢀ4-∆
D3V-6G6M-1ꢀ3-∆
D3V-016M-1ꢀ3-∆
t=0.5
Three, quick-connect
terminals (#187)
Note: 1. Stainless-steel lever.
2. Oilless polyacetal resin roller.
Model
D3V-21G6M-1@4A-∆
D3V-166M-1@5-∆
D3V-116M-1@5-∆
D3V-116M-1@4-∆
D3V-66M-1@4-∆
D3V-6G6M-1@3-∆
D3V-016M-1@3-∆
OF max.
RF min.
80 g {0.79 N}
5 g {0.05 N}
125 g {1.23 N}
14 g {0.14 N}
60 g {0.59 N}
6 g {0.06 N}
30 g {0.29 N}
---
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
0.8 mm
4.0 mm
1.6 mm
4.0 mm
1.6 mm
1.5 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
OP
20.7 1.2 mm
Precautions
Using Micro Loads
■ Cautions
Using a model for ordinary loads to open or close the contact of a
micro load circuit may result faulty contact. Use models that operate
in the following range. However, even when using micro load models
within the operating range shown below, if inrush current occurs
when the contact is opened or closed, it may increase contact wear
and so decrease life expectancy. Therefore, insert a contact protec-
tion circuit where necessary.
Handling
Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.
■ Correct Use
The minimum applicable load is the N-level reference value. This
value indicates the malfunction reference level for the reliability level
of 60% (λ 60). The equation, λ 60 = 0.5 × 10−6/operations indicates
that the estimated malfunction rate is less than
Mounting
1/2,000,000 operations with a reliability level of 60%.
Use two M3 mounting screws with an appropriate screwdriver to
mount the switch. Tighten the screws to a torque of 0.39 to
0.59 N • m {4 to 6 kgf • cm}.
Mounting Direction
Mount lever-operated switches with a maximum operating force of
0.49 N in a direction where the actuator weight will not be applied to
the switch. Since the switch is designed for a small load, its resetting
force is small. Therefore, resetting failure may occur if unnecessary
load is applied to the switch.
Operating
range for
Operating range
general-
for micro load
load models
models D3V-01
Insulation Distance
Inoperable
range
According to EN61058-1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.9 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a Separator to
ensure sufficient insulation distance.
Current (mA)
Solder Terminal Approval Conditions
Use of soldering iron for normal soldering is acceptable.
Soldering hook holes version available.
Soldering terminal types 1 and 2 are met.
12
Miniature Basic Switch D3V
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
(b) Seller:
(c) Buyer:
These terms and conditions
Omron Electronic Components LLC and its subsidiaries
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
3. Distributor: Any distributor shall inform its customer of the contents after and including
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at time of shipment. Payments for Products
received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no
right to set off any amounts against the amount owing in respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
handled, stored, installed and maintained and not subject to contamination, abuse,
misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real property
and income taxes), including any interest or penalties thereon, imposed directly or
indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall
be charged to and remitted by Buyer to Seller.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel any
unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products shall
pass from Seller to Buyer, provided that Seller shall retain a security interest in the
Products until the full purchase price is paid by Buyer;
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and description may be changed at any
time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
(b) Delivery and shipping dates are estimates only; and
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c)disclosure to
non-citizens of regulated technology or information.
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier must be presented in detail in writing to Seller
within 30 days of receipt of shipment.
III. PRECAUTIONS
VI. MISCELLANEOUS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal
and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
Miniature Basic Switch D3V
13
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's
dards, codes or regulations which apply to the combination of the Product in
programming of a programmable product, or any consequence thereof.
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as
vide applicable third party certification documents identifying ratings and limi-
tations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in com-
bination with the end product, machine, system, or other application or use.
a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be
ticular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
01/07
Specifications subject to change without notice
Printed in USA
Cat. No. J01C-E-01
14
Miniature Basic Switch D3V
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明