E3Z-LL61 [OMRON]
Compact and Reliable Laser Photoelectric Sensor;型号: | E3Z-LL61 |
厂家: | OMRON ELECTRONICS LLC |
描述: | Compact and Reliable Laser Photoelectric Sensor |
文件: | 总15页 (文件大小:2247K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Compact Laser Photoelectric Sensor with Built-in Amplifier
E3Z-LT/LR/LL
CSM_E3Z-LT_LR_LL_DS_E_6_8
Compact and Reliable
Laser Photoelectric Sensor
• Safety and reliability with laser class 1 (JIS and IEC).
• Product lineup includes models with distance setting without
influence of color.
• Maximum ambient operating temperature of 55°C and water-
proof construction in E3Z class.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Be sure to read Safety Precautions on
page 9.
Applications
Detect the sides of large tiles.
Count bottles.
Greatly Enhanced Beam Visibility
for Easier Optical Axis Adjustment of Sensors
Reliable Detection of
Small Objects and
Narrow Gaps with the Small Spot
Detect chip components on tape.
Detect protruding straws.
Long-distance Sensing
at 300 mm (White Paper)
A Low Black/White Error for
Applications with Mixed Colors
1
E3Z-LT/LR/LL
Ordering Information
Sensors (Refer to Dimensions on page 11.)
Red light
Model
Connection Response
Sensing method
Appearance
Sensing distance
method
time
NPN output
PNP output
E3Z-LT81 2M
E3Z-LT61 2M
Pre-wired
(2 m)
Emitter E3Z-LT61-L 2M
Receiver E3Z-LT61-D 2M
Emitter E3Z-LT81-L 2M
Receiver E3Z-LT81-D 2M
Through-beam
(Emitter + Receiver)
60 m
E3Z-LT66
Emitter E3Z-LT66-L
Receiver E3Z-LT66-D
E3Z-LT86
Emitter E3Z-LT86-L
Receiver E3Z-LT86-D
Connector
(M8, 4 pins)
*2
15 m
Pre-wired
(2 m)
E3Z-LR61 2M
E3Z-LR66
E3Z-LR81 2M
E3Z-LR86
(300 mm)
(Using E39-R1)
(Using E39-R12)
Retro-reflective with
MSR function
1 ms
7 m
(200 mm)
*1
Connector
(M8, 4 pins)
7 m
(200 mm)
(Using E39-R6)
Pre-wired
(2 m)
20 to 40 mm
(Min. distance set)
E3Z-LL61 2M
E3Z-LL66
E3Z-LL81 2M
E3Z-LL86
20 to 300 mm
(Max. distance set)
Connector
(M8, 4 pins)
Distance-settable
(BGS Models)
Pre-wired
(2 m)
25 to 40 mm
(Min. distance set)
E3Z-LL63 2M
E3Z-LL68
E3Z-LL83 2M
E3Z-LL88
0.5 ms
25 to 300 mm
(Max. distance set)
Connector
(M8, 4 pins)
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Accessories
Slits (A Slit is not provided with a Through-beam Sensor. Order a Slit separately if required.) (Refer to Dimensions on page 14.)
Minimum detectable object
Slit width
Sensing distance
Model
Contents
(reference value)
One set
(contains Slits for both the
Emitter and Receiver)
0.5 mm dia.
3 m
0.1 mm dia.
E39-S65A
Reflectors (A Reflector is required for each Retro-reflective Sensor: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)
(Refer to Dimensions on page 14.)
Sensing distance
Name
Model
Remarks
Rated value
Reference value
---
7 m (200 mm)
---
15 m (300 mm)
---
E39-R1
E39-R12
E39-R6
• Retro-reflective models are not provided with Reflectors.
• Separate the Sensor and the Reflector by at least the
distance given in parentheses.
Reflector
• The MSR function is enabled.
7 m (200 mm)
Note: If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights properly when you install the Sensor.
2
E3Z-LT/LR/LL
Mounting Brackets A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.
(Refer to Dimensions on E39-L/E39-S/E39-R.)
Appear-
ance
Appear-
ance
Model
Quantity
Remarks
Model
Quantity
Remarks
E39-L153
E39-L98
1
1
Metal Protective Cover Bracket
*1
*2
Mounting Brackets
E39-L104
*1
1
1
1
1
E39-L150
1 set
1 set
1
(Sensor adjuster)
Easily mounted to the aluminum
frame rails of conveyors and
easily adjusted.
E39-L43
Horizontal Mounting Bracket
*2
E39-L151
E39-L144
For left to right adjustment
E39-L142
*2
Horizontal Protective Cover
Bracket
Compact Protective Cover
Bracket (For E3Z only)
E39-L44
Rear Mounting Bracket
*2
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
*2. Cannot be used for Standard Connector models.
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
(Refer to Dimensions on XS3)
Size
Cable
Appearance
Cable type
2 m
Model
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Straight *1
5 m
2 m
5 m
M8
Standard
4-wire
L-shaped *1 *2
Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
3
E3Z-LT/LR/LL
Ratings and Specifications
Sensing
method
Retro-reflective with MSR
function
Through-beam
Distance-settable (BGS models)
Response
Standard response
E3Z-LR61/-LR66
High-speed response
E3Z-LL63/-LL68
NPN
output
E3Z-LT61/-LT66
E3Z-LT81/-LT86
E3Z-LL61/-LL66
E3Z-LL81/-LL86
Model
PNP
output
Item
E3Z-LR81/-LR86
E3Z-LL83/-LL88
White paper (100 × 100 mm):
20 to 300 mm
Black paper (100 × 100 mm):
20 to 160 mm
White paper (100 × 100 mm):
25 to 300 mm
Black paper (100 × 100 mm):
25 to 100 mm
0.2 to 7 m
(when using E39-R12)
Sensing distance
Set distance range
60 m
White paper (100 × 100 mm):
40 to 300 mm
Black paper (100 × 100 mm):
40 to 160 mm
White paper (100 × 100 mm):
40 to 300 mm
Black paper (100 × 100 mm):
40 to 100 mm
---
Spot diameter
(reference value)
5-mm dia. at 3 m
0.5-mm dia. at 300 mm
Standard sensing object
Opaque: 12-mm dia. min.
Opaque: 75-mm dia. min.
---
Minimum detectable object
(reference value)
6-mm-dia. opaque object at 3 m
0.2-mm-dia. stainless-steel pin gauge at 300 mm
5% max. of set distance
Differential travel
---
Black/white error
---
5% at 160 mm
5% at 100 mm
Directional angle
Receiver: 3 to 15°
---
Light source (wavelength)
Power supply voltage
Red LD (655 nm), JIS CLass 1, IEC Class 1, FDA Class 2
12 to 24 VDC 10%, ripple (p-p): 10% max.
35 mA (Emitter 15 mA,
30 mA max.
Current consumption
Control output
Receiver 20 mA)
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max., Open collector output
Load current of less than 10 mA: 1 V max.
Load current of 10 to 100 mA: 2 V max.
Residual output voltage
Output mode switching
Switch to change between light-ON and dark-ON
Reversed power supply
polarity protection, Output
short-circuit protection, and
Reversed output polarity
protection
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference pre-
vention, and Reversed output polarity protection
Protection circuits
Response time
Operate or reset: 1 ms max.
One-turn adjuster
Operate or reset: 0.5 ms max.
Five-turn endless adjuster
Sensitivity adjustment
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range Operating: −10 to 55°C, Storage: −25 to 70°C (with no icing or condensation)
Ambient humidity range
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Operating: 35% to 85%, Storage: 35% to 95% (with no icing or condensation)
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s2 3 times each in X, Y, and Z directions
IP67 (IEC 60529)
Degree of protection
Pre-wired cable (standard length: 2 m):
Standard M8 Connector:
E3Z-L@@1/-L@@3
E3Z-L@@6/-L@@8
Connection method
Operation indicator (orange)
Stability indicator (green)
Emitter for Through-bream Models has power indicator (orange) only.
Indicator
Pre-wired cable
(2 m)
Approx. 120 g
Approx. 30 g
Approx. 65 g
Approx. 20 g
Weight
(packed
state)
Standard
Connector
Case
Lens
PBT (polybutylene terephthalate)
Modified polyarylate resin Methacrylic resin
Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.)
Material
Modified polyarylate resin
Accessories
4
E3Z-LT/LR/LL
Engineering Data (Reference Value)
Parallel Operating Range
Through-beam Models
Through-beam Models
Retro-reflective Models
E3Z-LT@@ + E39-S65A
E3Z-LT@@
150
E3Z-LR@@
60
20
E39-R1
15
Y
100
50
0
40
20
X
E39-R6
10
5
0
0
2
4
6
8
10
20
40
60
80
5
10
15
20
25
30
−5
−50
−20
Y
−10
E39-R12
X
−100
−150
−40
−60
−15
−20
Distance (m)
Distance X (m)
Distance X (m)
Operating Range at a Set Distance
of 300 mm
Operating Range at a Set Distance
of 40 mm
BGS Models
BGS Models
E3Z-LL@@
E3Z-LL@@
2.50
3
2.00
Y
Sensing object:
2
100 × 100 mm
1.50
1.00
white paper
X
Y
Sensing object:
1
100 × 100 mm
white paper
0.50
0.00
X
0
0
50
100
150
200
350
10
20
30
40
50
60
250
300
−
−
−
0.50
−1
1.00
1.50
−2
−3
−
2.00
2.50
−
Distance X (mm)
Distance X (mm)
Excess Gain vs. Set Distance
Through-beam Models
E3Z-LT@@
10000
Retro-reflective Models
E3Z-LR@@
100
E39-R1
10
1000
E39-R12
1
E39-R6
100
0.1
0
10
20
30
40
50
60
70
80
0
10
20
30
Distance (m)
Distance (m)
Close Range Characteristics
BGS Models
E3Z-LL@3/-LL@8
350
E3Z-LL@1/-LL@6
350
300 mm
300
300 mm
300
250
200
250
200
150
160 mm
150
100 mm
100
100
40 mm
0 mm
40 mm
40 mm
40 mm
50
0
50
10 mm
12 mm
9 mm
10 mm
21 mm
White
0 mm
9 mm
0
White
paper
Black
paper
White
paper
Setting:
40 mm
Black
paper
Setting:
40 mm
White
paper
Setting:
300 mm
Black
paper
Black
paper
Setting:
40 mm
paper
Setting:
40 mm
Setting:
300 mm
Setting:
160 mm
Setting:
100 mm
5
E3Z-LT/LR/LL
Sensing Distance vs. Sensing Object Material
BGS Models
E3Z-LL@1/-LL@6
E3Z-LL@3/-LL@8
E3Z-LL@1/-LL@6
White Paper with a Set Distance of 40 mm White Paper with a Set Distance of 40 mm White Paper with a Set Distance of 300 mm
50
350
50
300
40
40
250
30
20
30
20
200
150
100
10
0
10
0
50
0
Black
rubber
Black
rubber
Black
paper
SUS Mirror
surface
Black
paper
SUS Mirror
surface
White Veneer Card-
paper board
White Veneer Card-
paper board
White Veneer Card-
Black Black SUS Mirror
paper
board
paper rubber
surface
Material
Material
Material
Emission Spot Diameter vs. Distance
Through-beam and Retro-reflective
Models (Same for All Models)
BGS Models (Same for All Models)
E3Z-LL@3/-LL@8
E3Z-LT@@, E3Z-LR@@
E3Z-LL@@
White Paper with a Set Distance of 100 mm
120
100
1.4
90
80
a
1.2
100
80
Dimension a
b
1.0
0.8
70
Spot shape
60
50
60
Dimension a
Dimension b
a
0.6
40
30
40
0.4
0.2
20
Dimension b
b
20
0
10
0
Spot shape
0
0
10
20
30
40
50
60
0
100
200
300
400
500
600
White Veneer Card- Black
Black
SUS
Mirror
surface
Set distance (m)
Set distance (mm)
paper board paper rubber
Material
Hysteresis vs. Distance
BGS Models
E3Z-LL@1 (LL@6)
E3Z-LL@3 (LL@8)
2.50
2.50
2.00
2.00
Black
paper
Black
paper
1.50
1.50
1.00
1.00
White
paper
White
paper
0.50
0.00
0.50
0.00
0
100
200
300
400
0
100
200
300
400
Set distance (mm)
Set distance (mm)
Inclination Characteristics (Vertical)
BGS Models
Inclination Characteristics (Horizontal)
BGS Models
E3Z-LL@@
E3Z-LL@@
20
20
Distance setting: 300 mm
Distance setting: 300 mm
Sensing object: White paper
Sensing object: White paper
100 × 100 mm
15
15
100 × 100 mm
10
10
5
5
0
0
(Upwards
and
Downwards)
Inclination
angle
+ θ
(Left and
−5
−5
Right)
Inclination
angle
−10
−10
+ θ
− θ
−15
−20
−15
− θ
Sensing
object
Sensing
object
Center
line
Center
line
−20
−40 −30 −20 −10
0
10
20
30 40
−40 −30 −20 −10
0
10
20
30 40
Inclination angle θ (°)
Inclination angle θ (°)
6
E3Z-LT/LR/LL
I/O Circuit Diagrams
NPN Output
Operation
Operation
selector
Model
mode
Timing charts
Output circuit
Light incident
Through-beam Receivers, Retro-reflective Models
Light interrupted
12 to 24 VDC
Brown
1
ON
OFF
Operation
indicator
Operation indicator
(orange)
Stability
indicator
(Green)
L side
(LIGHT ON)
Load
(Relay)
Light-ON
Dark-ON
ON
OFF
(Control
output)
100 mA
max.
Output transistor
(Orange)
Photo-
4
3
Load
Operate
Reset
electric
Sensor
Main
Black
(e.g., relay)
(Between brown A and black D leads)
ZD
Blue
Circuit
Light incident
Light interrupted
0 V
M8 4-pin Connector
Pin Arrangement
ON
OFF
Operation indicator
E3Z-LT61 *
E3Z-LT66 *
E3Z-LR61
E3Z-LR66
(orange)
D side
(DARK ON)
ON
OFF
2
4
Output transistor
1
3
Load
Operate
Reset
(e.g., relay)
(Between brown A and black D leads)
Pin 2 is not used.
Through-beam Emitter
Power
indicator
(orange)
M8 4-pin Connector
Pin Arrangement
Brown
1
2
4
Photo-
1
3
12 to 24 VDC
electric
Sensor Main
Circuit
Blue
3
Pins 2 and 4
are not used.
NEAR
FAR
12 to 24 VDC
Brown
Operation
indicator
(orange)
1
ON
OFF
Operation
indicator
Stability
indicator
(Green)
Load
(Relay)
L side
(LIGHT ON)
(Control
output)
ON
Output
transistor
Light-ON
Dark-ON
100 mA
max.
(Orange)
OFF
Photo-
4
3
Load
(e.g., relay)
Operate
Reset
electric
Sensor
Main
Black
E3Z-LL61
E3Z-LL66
E3Z-LL63
E3Z-LL68
ZD
Blue
(Between brown A and black D leads)
Circuit
0 V
NEAR FAR
Operation
M8 4-pin Connector
Pin Arrangement
indicator
(orange)
ON
OFF
D side
(DARK ON)
2
4
Output
transistor
ON
OFF
1
3
Load
Operate
(e.g., relay)
(Between brown A and black D leads)
Reset
Pin 2 is not used.
PNP Output
Model
Operation
mode
Operation
selector
Timing charts
Output circuit
Light incident
Light interrupted
Through-beam Receivers, Retro-reflective Models
12 to 24 VDC
Brown
ON
OFF
ON
OFF
Operate
Reset
Operation indicator
(orange)
1
Operation
indicator
L side
(LIGHT ON)
Stability
indicator
(Green)
Light-ON
Dark-ON
Output transistor
ZD
(Orange)
Black
Load
(e.g., relay)
Photo-
electric
Sensor
Main
4
3
(Control
output)
Load
(Relay)
100 mA
max.
(Between blue C and black D leads)
Circuit
Light incident
Blue
0 V
Light interrupted
M8 4-pin Connector
Pin Arrangement
ON
OFF
Operation indicator
(orange)
E3Z-LT81 *
E3Z-LT86 *
E3Z-LR81
E3Z-LR86
D side
(DARK ON)
2
4
ON
OFF
Output transistor
1
3
Load
Operate
Reset
(e.g., relay)
(Between blue C and black D leads)
Pin 2 is not used.
Through-beam Emitter
Brown
Power
M8 4-pin Connector
Pin Arrangement
1
indicator
(orange)
2
4
Photo-
1
3
12 to 24 VDC
electric
Sensor Main
Circuit
Blue
3
Pins 2 and 4 are not used.
NEAR
12 to 24 VDC
FAR
Brown
Operation
indicator
(orange)
1
Operation
indicator
ON
OFF
Stability
indicator
(Green)
L side
(LIGHT ON)
ZD
Output
transistor
ON
OFF
Light-ON
Dark-ON
(Orange)
Black
Photo-
4
3
Load
(e.g., relay)
electric
Sensor
Main
(Control
output)
Load
(Relay)
Operate
Reset
100 mA
max.
E3Z-LL81
E3Z-LL86
E3Z-LL83
E3Z-LL88
(Between blue C and black D leads)
Circuit
0 V
Blue
NEAR FAR
M8 4-pin Connector
Pin Arrangement
Operation
indicator
(orange)
ON
OFF
2
4
D side
ON
Output
1
3
(DARK ON)
transistor
OFF
Load
(e.g., relay)
Operate
Reset
Pin 2 is not used.
(Between blue C and black D leads)
* Models numbers for Through-beam Sensors (E3Z-LT@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-LT61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-LT61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
7
E3Z-LT/LR/LL
Plugs (Sensor I/O Connectors)
M8 4-pin Connectors
Wire color
2
1
2
3
4
4
Brown
White
Blue
1
3
Black
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Nomenclature
Sensors with Sensitivity Adjustment and
Distance-settable Sensor
BGS Models
E3Z-LL@@
Mode Selector Switch
Through-beam Models
E3Z-LT@@ (Receiver)
Retro-reflective Models
E3Z-LR@@
Operation indicator
(orange)
Stability indicator
(green)
Distance adjuster
(5-turn endless)
Sensitivity adjuster
Operation indicator
(orange)
Stability indicator
(green)
Operation selector
Mode selector
switch
8
E3Z-LT/LR/LL
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
Precautions for Correct Use
This product is not designed or rated for ensuring
safety of persons. Do not use it for such purpose.
Do not use the product in atmospheres or environments that exceed
product ratings.
● Laser Warning Labels
Be sure that the correct laser warning label (enclosed) is attached for
the country of intended use of the equipment containing the
Photoelectric Sensor. Refer to the user's manual for details.
To ensure safe use of laser products, do not allow the
laser beam to enter your eye. Direct exposure may
adversely affect your eyesight.
● Usage Environment
Water Resistance
The Sensor is rated IP67. Do not use it in water, in the rain, or
outdoors.
CAUTION
Do not connect an AC power supply to the Sensor.
If AC power (100 VAC or more) is supplied to the
Sensor, it may explode or burn.
Ambient Environment
Do not install the product in the following locations. Doing so may
result in product failure or malfunction.
• Locations subject to excess dust and dirt
• Locations subject to direct sunlight
• Locations subject to corrosive gas
• Locations subject to organic solvents
• Locations subject to shock or vibration
Precautions for Safe Use
Be sure to abide by the following precautions for the safe operation of
the Sensor.
● Operating Environment
• Locations subject to exposure to water, oil, or chemicals
• Locations subject to high humidity or condensation
Do not use the Sensor in locations with explosive or flammable gas.
● Wiring
● Designing
Power Supply Voltage and Output Load Power Supply
Voltage
Power Reset Time
The Sensor is ready to operate 100 ms after the Sensor is turned ON.
If the load and Sensor are connected to independent power supplies
respectively, be sure to turn ON the Sensor before supplying power
to the load.
Make sure that the power supply to the Sensor is within the rated
voltage range. If a voltage exceeding the rated voltage range is
supplied to the Sensor, it may explode or burn.
Power Supply Voltage
● Wiring
The maximum power supply voltage is 26.4 VDC. Applying a voltage
exceeding the rated range may damage the Sensor or cause burning.
Avoiding Malfunctions
If using the Sensor with an inverter or servomotor, always ground the
FG (frame ground) and G (ground) terminals, otherwise the Sensor
may malfunction.
Load
Do not use a load that exceeds the rated load.
● Mounting
Load Short-circuiting
Do not short-circuit the load, otherwise the Sensor may be damaged
or it may burn.
Mounting the Sensor
• If Sensors are mounted face-to-face, make sure that the optical
axes are not in opposition to each other. Otherwise, mutual
interference may result.
Connection without Load
• Always install the Sensor carefully so that the aperture angle range
of the Sensor will not cause it to be directly exposed to intensive
light, such as sunlight, fluorescent light, or incandescent light.
• Do not strike the Photoelectric Sensor with a hammer or any other
tool during the installation of the Sensor, or the Sensor will lose its
water-resistive properties.
Do not connect the power supply to the Sensor with no load
connected, otherwise the internal elements may explode or burn.
Always connect a load when wiring.
• Use M3 screws to mount the Sensor.
• When mounting the case, make sure that the tightening torque
applied to each screw does not exceed 0.54 N·m.
Metal Connectors
• Always turn OFF the power supply to the Sensor before connecting
or disconnecting the metal connector.
• Hold the connector cover to connect or disconnect it.
If the XS3F is used, always tighten the connector cover by hand. Do
not use pliers.
If the tightening is insufficient, the degree of protection will not be
maintained and the Sensor may become loose due to vibration.
The appropriate tightening torque is 0.3 to 0.4 N·m.
If other commercially available connectors are used, follow the
recommended connector application conditions and recommended
tightening torque specifications.
9
E3Z-LT/LR/LL
• The stability indicator may turn off in reaction to reflection from
background objects. In such cases, incline the Sensor by 10° as
shown in the illustration for more stable detection.
Mounting Direction for Distance-settable Models
• Make sure that the sensing side of
the Sensor is parallel with the
surface of the sensing objects.
Normally, do not incline the
Reflection
Approx. 10˚
Background object,
conveyor, etc.
Sensor towards the sensing
object.
Sensing side
Surface of sensing
object
● Adjusting Distance-settable Models
Indicator Operation
If the sensing object has a glossy
surface, however, incline the Sensor
by 5° to 10° as shown in the
illustration, provided that the Sensor
is not influenced by background
objects.
Distance threshold
(settable)
Unstable NEAR
Stable NEAR
Unstable FAR
Stable FAR
FAR region
NEAR region
Glossy object
BGS
L/ON
ON
OFF
ON
Stability
(green)
• If there is a mirror-like object below the Sensor, the Sensor may not
operate stably. Therefore, incline the Sensor or separate the
Sensor from the mirror-like object as shown below.
Operation
(orange)
OFF
ON
Stability
(green)
OFF
ON
D/ON
Operation
(orange)
OFF
Note: If the stability indicator is lit, the detection/no detection status is
stable within the rated ambient operating temperature (−10 to
55°C).
Sensing
object
● Inspection and Maintenance
Mirror-like object
Cleaning
• Do not install the Sensor in the wrong direction. Refer to the
following illustration.
Never use paint thinners or other organic solvents to clean the surface
of the product.
Correct
Incorrect
Correct
Sensing
object
Sensing
object
Sensing
object
Moving
direction
Moving direction
Moving direction
Install the Sensor as shown in the following illustration if each sensing
object greatly differs in color or material.
Incorrect
Correct
Moving direction
Moving direction
10
E3Z-LT/LR/LL
(Unit: mm)
Dimensions
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
Emitter
E3Z-LT@1-L
Through-beam*
Pre-wired Models
E3Z-LT61
12
Power indicator
(orange)
E3Z-LT81
10.8
20
2.1
3311
2.8
3
Lens
3.5 dia.
12.7
25.4
Two, M3
4 dia. vinyl-insulated round cable with
2 conductors (Conductor cross section:
0.2 mm2 (AWG24), Insulator diameter:1.1 mm),
Standard length: 2 m
11.2
7.5
4.5
Receiver
E3Z-LT@1-D
Operation Indicator
(orange)
Operation selector
Sensitivity adjuster
Stability indicator (green)
10.8
2200
2.1
3311
2.8
3
Lens
12.7
25.4
11
Two, M3
4 dia. vinyl-insulated round cable with
3 conductors (Conductor cross section:
0.2 mm2 (AWG24), Insulator diameter: 1.1 mm),
Standard length: 2m
12
Through-beam*
Standard Connector
Models
Emitter
E3Z-LT@6-L
Power indicator (orange)
E3Z-LT66
E3Z-LT86
10.8
20
2.1
2.8
3
Lens 3.5 dia.
12.7
Terminal No.
Specifications
3311
25.4
1
2
3
4
+V
---
0 V
---
10.4
Two, M3
M8 4-pin connector
4.5
Pins 2 and 4 are not used.
9.75
11.2
7.5
Operation Indicator
(orange)
Receiver
E3Z-LT@6-D
Operation selector
Sensitivity adjuster
Stability indicator (green)
10.8
2200
2.1
2.8
3
Lens
12.7
Terminal No.
Specifications
3311
25.4
11
1
2
3
4
+V
---
Two, M3
0 V
10.4
Output
M8 4-pin connector
Pins 2 is not used.
9.75
* Models numbers for Through-beam Sensors (E3Z-LT@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-LT61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-LT61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
11
E3Z-LT/LR/LL
Retro-reflective Models
Pre-wired Models
E3Z-LR61
11.2
7.5
4.5
Operation Indicator
(orange)
E3Z-LR81
Operation selector
Sensitivity adjuster
Stability indicator (green)
10.8
2.1
2200
2.8
Receiver
Lens 7 dia.
3
16.7
8
3311
25.4
Two, M3
Emitter
Lens 2.5 dia.
4 dia. vinyl-insulated round cable with
3 conductors (Conductor cross section:
0.2 mm2 (AWG24), Insulator diameter: 1.1 mm),
Standard length: 2m
Retro-reflective Models
Standard Connector
Models
11.2
7.5
4.5
Operation Indicator
(orange)
E3Z-LR66
E3Z-LR86
Operation selector
Sensitivity adjuster
Stability indicator (green)
10.8
2.1
2200
2.8
Receiver
Lens 7 dia.
3
16.7
8
3311
25.4
Terminal No.
Specifications
1
2
3
4
+V
---
Emitter
Lens 2.5 dia.
Two, M3
10.4
0 V
M8 connector
Output
9.75
Pins 2 is not used.
12
E3Z-LT/LR/LL
BGS Models
Pre-wired Models
E3Z-LL61
12
7.3
Operation Indicator
(orange)
8.4
E3Z-LL81
E3Z-LL63
E3Z-LL83
Set distance adjuster
Operation selector
Stability indicator (green)
1100..88
20
2.1
3311
Receiver
Lens 7 dia.
2.8
3
18.7
25.4
8
Emitter
Lens 2.5 dia.
Two, M3
4-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section:
0.2 mm2 (AWG24), Insulator diameter:1.1 mm),
Standard length: 2 m and 0.5 m
BGS Models
Standard M8
Connector Models
E3Z-LL66
12
7.3
Operation Indicator
(orange)
8.4
E3Z-LL86
E3Z-LL68
E3Z-LL88
Set distance adjuster
Operation selector
Stability indicator (green)
1100..88
2.1
Receiver
2.8
20
3
Lens 7 dia.
18.7
3311
25.4
8
Emitter
Lens 2.5 dia.
10.4
Two, M3
M8 connector
9.75
Terminal No.
Specifications
1
2
3
4
+V
---
0 V
Output
Pins 2 is not used.
13
E3Z-LT/LR/LL
Accessories (Order Separately)
Slit
E39-S65A
Reflector
E39-R1
40.3
34
7.5
Two, 3.5 dia.
10.4
20.2
0.5 dia.
12.7
32.2
59.9 52
0.2-mm-thick
8
1.6
7
2.7
Material
SUS301 stainless steel
Materials
Reflective surface: Acrylic
Rear surface:
ABS
Reflector
E39-R6
Reflector
E39-R12
40
34
4.8
5.5
45
2.9
23
R3.7
60 52
30
23
Two,
3.4 dia.
R3.7
37
Two, 3.5 dia.
3.5
Materials
Materials
Reflective surface: Acrylic
Rear surface: ABS
Reflector: Polycarbonate (surface)
Acrylic (interior)
Frame:
ABS
Cat. No. E850-E1-01
In the interest of product improvement, specifications are subject to change without notice.
14
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2015.10
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2015 All Right Reserved.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明